Used Enea Mattei Rotary Compressor for sale (7,175)

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Redpfxezpbrqe Amyocd Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Condition: used, Year of construction: 2023, feed pressure 11 bar liter capacity 727 l/min total power requirement 4,4 kW Redpfjzpbi Nex Amyecd weight of the machine ca. 170 kg

Condition: used, Year of construction: 2024, overall weight: 205 kg, total length: 1,180 mm, total width: 600 mm, total height: 1,470 mm, pressure (max.): 10 bar, noise level: 67 dB, Air delivery (at 10 bar): 1000 l/min Rated power: 7.5 kW Air receiver tank: 270 L Rcjdpfx Amozqvwwjysd Noise level: 67 dB(A) Dimensions (L x W x H): 118 x 60 x 147 cm Weight: 205 kg

Condition: like new (used), Year of construction: 2014, functionality: fully functional, UNUSED GSA T320 CNC Tilting and rotating table. Full specification on request. Item in new condition, having never been used. Rjdpfx Amoxy Iq Usyscd Available now.. Contact us for further information.

Condition: new, Year of construction: 2026, English translation: The LUFT 700 VSD+PM COMPACT oil-lubricated compressor with dryer features a traditional belt-driven transmission, which results in significantly easier maintenance and lower service costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and when worn, the belt can be easily replaced with a new one. This design also ensures longer service life of components. The absence of a rigid connection between the motor and the compressor’s working elements reduces wear and mechanical stress. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, which gives access to key device information, increasing flexibility and control over processes. Technical parameters Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 690 L/min Rcodpfx Aeybvkasmyed Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Rodpfxjycctqj Amyjcd Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET 230 V screw compressor Screw compressors from the Polish brand CORMAK are a guarantee of quality and reliability. Our several years of experience in selling compressors has allowed us to create models with an excellent price-quality ratio. The presented model is perfect for small workshops or small manufacturing companies. It is characterized by high efficiency (380 l / min) in relation to its dimensions, which allows you to operate several devices at the same time. Very low noise level (60 dB) makes staying in the same room not inconvenient. Thanks to the high-quality components used, the compressor is designed for continuous operation and can be used in industry. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision workmanship. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Efficiency optimization: Thanks to inverter technology and intelligent algorithms, the LUFT 400 dynamically adjusts energy consumption to the current demand for compressed air. This means a significant reduction in operating costs while maintaining maximum efficiency. Proven drive system: The LUFT 400 compressor uses a reliable direct drive that minimizes loads on the screw block and engine, ensuring efficient operation and long service life. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. Technical parameters Engine power 3.0 kW / 4 HP Voltage 230V/50Hz Efficiency 0-6 bar average 400 L/min Efficiency at 6 bar 390 L/min Redpotz S H Nsfx Amyocd Capacity at 8 bar 380 L/min Capacity at 10 bar 380 L/min Outlet port diameter (G) 1/2" Dimensions 800 x 520 x 740 mm Weight 95 kg Manufacturer: Cormak

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, GRAFFENSTADEN ARF 114 Z boring machine, photos and descriptions attached Machine in perfect mechanical and electrical condition Longitudinal travel: 2 m Transversal travel: 2 m Vertical travel: 1.75 m Spindle diameter: 115 mm Spindle stroke: 900 mm 1 Graffenstaden universal head 1 Andréa rotary table 1 extension 1 3-axis digital readout Rcedpfoyzm Dfsx Amyod 2 feed ranges via variator for all movements Numerous tools included Machine can be seen in working condition Machine to be dismantled on site Tel: 03.80.92.23.28 or 03.80.92.34.03 or 06.79.58.06.79

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 14091807829900901, overall weight: 350 kg, total length: 800 mm, total width: 700 mm, total height: 1,200 mm, power: 22 kW (29.91 HP), pressure (min.): 7.5 bar, pressure (max.): 13 bar, Equipment: type plate available, Screw compressor, 22 kW Operating pressure: 7.5 - 13 bar 400 V / 3-phase / 50 Hz Rcodpfx Amszqr Edeyod Made in Germany / CE

Condition: used, functionality: fully functional, power: 15 kW (20.39 HP), Year of construction: 1992, operating hours: 23,257 h, machine/vehicle number: 15030, We are offering this used BOGE VLED 15R-8 compressor, manufactured in 1992, for sale. Manufacturer: BOGE Model: VLED 15R-8 Year of manufacture: 1992 Volumetric flow rate: 1268 m³/min Final compression pressure: 13 bar Main rotor speed: 4405 min-1 Drive power: 15 kW Rcjdpfxszqpk Rs Amyed If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2018, Manufacturer: ATLAS COPCO, Type: GA55VSD+ FF, Year of manufacture: 2018, Serial no. API863701, Motor power 55 kW, Maximum pressure 12.75 bar, Compressed air tank, Manufacturer: Lohenner, Year of manufacture: 2018, Serial no. 222546, Capacity 2,000 l, Oil/water separator Rcsdpfxjzn Aq Es Amysd Operating hours: 3,997; Real-time hours: 8,740 - later release date: 10/31/2026 +++ Attention: This machine is part of an online auction! +++

Year of construction: 2021, condition: used, empty load weight: 9 kg, Used cordless combination hammer for sale: Ideal for heavy-duty work. Not dependent on a power source. Year of manufacture: 2021 Includes 2 batteries (12Ah), charger, and case. Rcsdozqhp Eepfx Amyjd For drilling and breaking. 3 speeds. Price: €750, including VAT. Multiple units in stock!

Condition: ready for operation (used), NIKKEN 5 AX -170 CNC / Rotary Table incl. Controllers -TYPE 5-axis -AX 170 CNC / Rotary Table -The NIKKEN / 5 AX -170 is a compact and robust CNC swivel table for precise drilling and milling operations in 4- and 5-axis machining. -Complete documentation available. -Well-maintained overall condition. Overall dimensions: L x W x H 780x340x280mm Errors and omissions excepted. Rcedpfxozqg I Hs Amyjd

Condition: excellent (used), Year of construction: 2017, operating hours: 10,846 h, functionality: fully functional, Screw compressor, Variable28 Inverter integrated. Rjdpfx Asznuf Ujmyecd 28 kW 13 bar 4.24 m3/min Year of manufacture: 2017 Operating hours: 41,635

Condition: good (used), Year of construction: 2010, Screw compressor COMPAIR L15-10, serial number CD10001916004, pressure 10 bar, output 15 kW, year of manufacture 2010. Pressure vessel OKS, serial number 486069, volume 1,500 liters, year of manufacture 2001. Rcodpfx Aozqcmxsmyed Refrigerant dryer ALUP ADQ 180 (E6), serial number ITJ912677, year of manufacture 2025.

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale - Can be tilted +/- 15 degrees from/towards the machine - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Rsdpfx Amjd E A I Njyocd Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Rodpfsu Tln Nsx Amyecd Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Year of construction: 2010, table diameter 1000 mm table load 0,5 t table height 300 mm total power requirement 12 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 1,2 x 0,3 m Permamantly rotationg table,adjustable in speed. Basic of table has a diameter Redsznndkspfx Amyecd of 570 mm. Table diameter increased to 1000 mm. Table was mounted on a surface ginding machine. Table will be delivered with a new spare motor.

Condition: used, Year of construction: 2015, operating hours: 49,965 h, functionality: fully functional, Screw compressor Kaeser CSDX165SFC Inverter integrated Rcedpfoznmqcex Amysd 90 kW 8.50 bar 15.84 m3/min Year of manufacture: 2015 Operating hours: 49,965

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 203836, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection weight: 90 g, total length: 3,800 mm, total width: 2,100 mm, total height: 3,100 mm, overall weight: 8,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, For sale is a vertical injection molding machine from the manufacturer ENGEL, model Insert 330V/80 Rotary (800 kN / 80t). Technical data: Machine type: Insert 330V/80 Rotary Year of manufacture: 2015 Machine number: 203836 Design/Construction: Vertical unit with rotary table Control system: ENGEL CC300 Drive technology: Ecodrive CLAMPING UNIT: Clamping force: kN 800 (80 t) Clamping unit design: Vertical / column-free or barrier-free Table design: 2-station rotary table INJECTION UNIT: Injection unit type: Type 330 Screw diameter: 30 mm Theoretical displacement volume: 99 cm³ Injection part weight: 90 g/shot Nozzle type: Needle-close nozzle Injection unit installation position: Vertical, from above HYDRAULICS, DRIVE, CONTROL CABINET & INTERFACES: Rodpoznl Erofx Amyscd Drive concept: ENGEL Ecodrive (energy-optimized) Automation interface: Euromap 67.1 Safety systems: Light curtain / protective enclosure for the work area MACHINE DIMENSIONS, TRANSPORT, AND WEIGHTS Installation dimensions (basic machine): 3,800 x 2,100 x 3,400 Transport dimensions: 3,800 x 2,100 x 3,100 mm Required hall height: 3,800 mm Total weight: 8,500 kg Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, yet affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: excellent (used), Year of construction: 2013, operating hours: 72,688 h, functionality: fully functional, Atlas Copco GA45VSDFF screw compressor Inverter and dryer integrated. 45 kW 12.75 bar Rcjdpfxoznlx So Amyjd 8.67 m3/min Year of manufacture: 2013 Operating hours: 72,688 h

Condition: used, ATLAS COPCO TYPE: ZR90 Rjdeuruf Nopfx Amyscd SCREW COMPRESSOR

Condition: used, Year of construction: 2001, ATLAS COPCO GA110 SCREW COMPRESSOR Rodpfx Amsuufycsyscd

Condition: excellent (used), functionality: fully functional, KAESER SM11 screw compressor, serviced Technical data: Capacity: 1.05 m3/min (1050/min) Engine power: 7.5 kW Operating hours: 9103 h Pressure: 10 bar Net price: 6500 PLN Gross price: 7995 PLN Rcedpfx Aozp Ignsmyed The compressor is in fully working condition, and we provide service support. See video below.

Condition: excellent (used), functionality: fully functional, KAESER SK26 screw compressor, machine after service. Technical specifications: capacity: 2080 m3/min; Rcodpfjzp Ifkjx Amyed engine power: 15 kW; pressure: 10 bar net price: 5500 gross price: 6765 Compressor in perfect working order. We provide service support. Link to video below.