Used Edge Belt Sander for sale (12,112)

Condition: used, Year of construction: 1976, Second-hand machine Year of manufacture: 1976 Features and technical specifications: - grinding from below - Material feed via rubber rollers - Non-contact control of oscillation - Quick-change pressure bar - Electric motor-driven adjustment of tool thickness with an easy-to-read display Digital display Rsdezk Nyrjpfx Amyecd - Push-button control with contactor control - Sanding width 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width 1360 mm - Sanding belt length 1900 mm - Roller feed speed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption approx. 180 NL/min Motor power 17.5 kW Dimensions W x D x H 1800 x 1100 x 1520 mm Weight: 2,600 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1998, Second-hand machine Year of manufacture: 1998 1 automatic belt sander with combination unit Rjdpfx Amozk Nxzoyecd with electronic articulated pressure beam For sanding soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier plates Sanding off defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro and polyester coatings Grinding of barrier films with graphical operator terminal NC-controlled thickness adjustment from 3–150 mm Activation of the calibration roller via terminal With patented CSD articulated pressure beam for compensating for workpiece tolerances of up to 2 mm Grinding width 1350 mm Grinding belt length: 2150 mm Grinding belt speed, frequency-controlled: approx. 2–18 m/sec Grinding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt discharge 490 l/min Extraction connection: 180 mm Air requirement for grinding unit: 1,800 m³/h Required air velocity: 20 m/sec Total power requirement approx. 17 kW Weight approx. 2,500 kg Dimensions WxDxH 2090x1670x2020 mm The machine is yet to be fitted with a new pre-lift belt Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 1983, Second-hand machine Year of manufacture: 1983 Condition: fully inspected and serviced, Includes new feed belt Features and technical specifications: - Includes combination unit with contact roller and sanding shoe - with height-adjustable contact roller for calibration - with an air-cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - with pneumatic belt tensioning device - fitted with a rotating cleaning brush on the outlet side of the machine - Belt oscillation controlled by a photoelectric sensor for automatic monitoring and control of the lateral belt position to ensure even belt wear - with roller table at the inlet - with digital display for the electrically driven workpiece thickness adjustment - with additional veneer sanding beam - Includes 2 spare grinding shoes - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Clearance height: 150 mm - Main motor: 15 kW - Feed speed continuously adjustable from 2.5 to 12.5 m/min Rodpezk Npmefx Amyocd - Extraction connections: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2,300 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2001, Second-hand machine Rcedpfx Ajzk Nm Semyjd Year of manufacture: 2001 Features and technical specifications: Grinding width: 1,100 mm Abrasive belt length: 1,900 mm Workpiece thickness: 3–150 mm Feed speeds: infinitely variable 2.5–13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 grinding shoe unit: with air-cushion grinding shoe Drives: 1. Grinding unit: 15 kW 2nd grinding unit: 15 kW 3. Grinding unit: 11 kW with table extension at the inlet with table extension at the outlet Total power rating: 43 kW Extraction capacity: approx. 6,750 m³/h Air velocity: 20 m/s Compressed air connection: 6–8 bar Air consumption: approx. 30 l/min Dimensions: 1,750 x 2,740 x 1,890 mm Weight: 3,100 kg Availability: at short notice Location: 65439 Flörsheim

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Features and technical specifications: Constant working height with combined unit with steel contact roller and electronic CPS articulated pressure beam with 25 mm pitch Sanding width 1100 mm Abrasive belt length 1900 mm Workpiece thickness min./max. 3–150 mm Rjdpfx Aozk Nlbsmyjcd Feed speed: infinitely variable 2.5–13 m/min Grinding unit 11 kW Paint package: - infinitely variable belt drive speed via frequency converter - Belt blow-off device - Vacuum conveyor belt with blower Control system: - Terminal with 50 programme memory slots - simple menu control via plain-text display - visual display of the active elements in the processing line - Fully automatic PLC-controlled start-up sequence for all drives - digital time and attendance recording with cleaning brush Roller table at the inlet Roller table at the outlet Extraction capacity 1850 ³/h Extraction connections: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection 6–8 bar Air consumption 10 l/min Weight 2,200 kg Availability: at short notice Location: Röllbach

Condition: excellent (used), CATALOGUE NUMBER 7967 TECHNICAL DATA - max. width of workpiece: 1100 mm - max. height of workpiece: 170 mm 2 units: 1) metal grooved roller for calibration 2) grooved rubber roller + shoe + metal roller – from above: - slip rubber roller - unit (two units on one motor) 15 kW - slip rubber roller - take-off rubber roller - tape blowing – from below: - 2 slip metal rollers - conveyor belt Rcodeza Elwspfx Amyed - 2 slip rubber rollers - pneumatic tape oscillation - grinding thickness potentiometer - electric table lifting + manual (for precise adjustment) - pneumatic brake - 2 feed speed types - working pressure 6-8 bar - dust extraction nozzle diameter 2x140 mm - overall dimensions L/W/H 1830x1670x1950 mm - weight 1160 kg ADVANTAGES - Made in Italy - 2 grinding units - Unpainted - Used sander, in perfect condition Net price: 72900 PLN Net price: 17357 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, Rsdpfx Aozkvd Rsmyjcd air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar Rcsdpezkufgofx Amyed - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 1,300 mm, TECHNICAL DETAILS Working width: 1,300 mm Rcodpfszktntsx Amysd EQUIPMENT Vacuum conveyor belt Satinizing roller Brush roller EA dust extraction machine with high-pressure blowing system and rotating nozzles Ionization for statically charged dust Cross-grinding unit with belt blowing device Longitudinal grinding unit, infinitely adjustable speed, with belt blowing device Calibrating roller can be activated via the control panel

Condition: excellent (used), CATALOGUE NUMBER: 5799 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 140mm - Min. length of workpiece: 300mm - 2 sanding units: - Upper and lower + platens * Upper: - 2 sliding, metal pressure rollers - Pressure - Sanding unit: 2 metal rollers + platen - Sliding pressure roller - Conveyor belt * Lower: - Conveyor belt - 2 sliding, smooth metal rollers - Pressure - Sanding unit: 2 metal rollers + platen - 3 sliding, smooth metal rollers - Electrically adjustable sanding height Rcjdpfx Ajzkrxkemyod - Oscillation of sanding belts - Pneumatic belt cleaning - Smooth feed rate adjustment using a frequency inverter: 3-15 m/min - Feed motors: 2 x 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air consumption: 6-8 bar - Diameter of dust extraction nozzles: 4 x 100mm - Overall dimensions (L/W/H): 2340 x 1420 x 1920 mm - Weight: 1480 kg - For short components (belts overlap) - German manufacture - Very good condition - Unpainted - Used sander Net price: 18900 PLN Net price: 4500 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (Price may change in the event of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1996, functionality: fully functional, On offer: CB 1030 R+RT wide belt sander, 1050 mm The machine is used, has undergone technical inspection, is in full working order, and is ready for operation. Before purchase, it can be started and thoroughly inspected at our company’s premises. The machine’s greatest advantage is its dual-unit R+RT configuration, which enables calibration and precise finishing sanding. The combination of a calibrating roller with a combination unit (rubber roller and sanding shoe) makes the machine ideally suited for processing solid wood, glued components, wood-based panels, and preparing surfaces for lacquering and further processing. Specifications: • Manufacturer: CB • Model: 1030 R+RT • Working width: 1050 mm • Maximum working height: 160 mm • Number of sanding units: 2 • First unit: rubber roller with a diameter of 150 mm • Second combination unit: rubber roller with a diameter of 110 mm and a sanding shoe • Sanding shoe with manual adjustment (without inching function) • Main motor power: 7.5 kW • Motor start-up in star-delta configuration • 2 conveyor belt speeds • Digital sanding thickness indicator • Automatic component thickness gauge with worktable height adjustment • Abrasive belt dimensions: 1900 × 1050 mm • Dust extraction ports: 2 × 150 mm • The first roller shows signs of use and has minor scratches • Under certain conditions, this may occasionally cause the abrasive belt to slip – we will gladly provide details during a machine demonstration • Overall dimensions: 148 × 174 × 196 cm (L × W × H) Additional information: • Machine preserved in its original condition • The photos show the actual condition of the offered machine • Free machine operation training at our company’s premises • The price stated in the auction does not include VAT Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We assist in obtaining a lease or leasing loan Rodezmhzyspfx Amyecd • The delivery cost depends on the destination and the method of machine transport

Condition: used, Year of construction: 2005, Number of belts: 2-belt max. Passage height: 150 mm max. Working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller, sanding shoe 1st unit: electronic individual segments 35 mm Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1370 mm Sanding belt speed of 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubber-coated contact roller 65° Shore, sanding shoe 2nd unit: electronic individual segments 35 mm Rcjdpfezkh Sysx Amyed Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1370 mm Sanding belt speed of 2nd unit: continuously variable 2 - 18 m/sec Belt blowing device: for 2nd unit Cleaning brushes: Yes Finish sanding possible: Yes Vacuum carpet: Yes Feed rate: continuously variable from 2.5 - 13 m/min Control: Touch screen, electric/pneumatic Belt oscillation: yes Infeed height: fixed (top part moves) Table display: digital Working height or table height: 900 mm Motor power: 36 kW Storage location: Nattheim

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: metal roller, slip unit metal roller, slip unit with shoe metal output roller, slip – from below: Rodpfjzkfybox Amyocd conveyor belt pneumatic belt oscillation electric table lifting 2 types of feed speed motor 11kW with pneumatic brake working pressure 6-8bar diameter of extraction nozzle 2x150mm overall dimensions L/W/H 1960x1700x2000mm weight approx. 2000kg – made in Germany – 2 units – unpainted – used sander, very good condition Net price: 31900 PLN Net price: 7595 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, 120 x 2600mm sanding belt Rjdpey H Itfefx Amyecd 950 x 270mm worktable with tilt Handwheel rise and fall to worktable Mitre fence for table End table for bobbin / shaped sanding 3kw sanding belt motor 0.4kw belt oscillation motor

Condition: new, Year of construction: 2023, New machine Rodpfxjzi Hwfe Amyocd Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore Rodpfx Ajzi A R Ismyjcd 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Vacuum table Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Available from stock in Lieboch

Condition: used, Year of construction: 2004, functionality: limited functionality, machine/vehicle number: AE/026727, feed rate X-axis: 9 m/min, total width: 1,640 mm, total height: 2,300 mm, total length: 2,200 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,900 kg, table height: 900 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt speed: 18 mm/s, type of input current: three-phase, grinding belt length: 2,150 mm, workpiece height (max.): 170 mm, compressed air connection: 8 bar, grinding belt width: 1,115 mm, table length: 2,100 mm, table width: 1,150 mm, power of feed motor: 2,000 W, air demand: 40 m³/h, operating pressure: 6 bar, workpiece width (max.): 1,100 mm, The machine is operational except for the sectional shoe, which requires repair or replacement. The machine will be in service until August 15, 2026. Rcodpoy R Er Tjfx Amyod

Condition: used, Year of construction: 2012, Condition: Used, ready for operation • The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore. • The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation. Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation. • The third unit is a finishing brush roller. Technical specifications: Working width: 1350 mm Sanding belt size: 1380 x 2200 mm Workpiece thickness: 3–160 mm Motor power of first unit: 11 kW Motor power of second (combined) unit: 11 kW Rcodezlxp Sspfx Amysd Feed speed: 3–16 m/min Feed motor power: 1.5 kW Pneumatic connection: 6 bar Air consumption: 17 Nl/min Extraction port diameter: 158 mm Extraction air speed: 25 m/min Required extraction capacity: 3095 m³/h Net machine weight: 2450 kg Width: 2320 mm Length: 2030 mm Height: 2050 mm The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame. Table rollers: one roller is positioned before and one after the feed belt. • The feed belt has a 60 Shore hardness rubber surface with a concave pattern. • Precise tracking of the feed belt is ensured by an automatic centering unit. PRESSURE HOLD-DOWN UNITS • Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded. SAFETY EQUIPMENT • with CE standards. Options: • Electronically controlled sensing unit for the 42-section sanding pad • Front table extension with two roller cylinders • Rear table extension with two roller cylinders • Complete vacuum table with vacuum pump: 2.2 kW – 3 HP • Electro-pneumatic engagement/disengagement of the contact roller • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch) • Electro-pneumatic engagement/disengagement of the contact roller • Electro-pneumatic engagement/disengagement of the sanding pad • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Possibility of reversing the sanding belt rotation direction • Electronic inverter 11 kW (15 HP) • IPC COMPACT 8.5" control panel • Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 26476, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 7,500 kg, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,000 mm, workpiece height (max.): 200 mm, grinding belt width: 1,350 mm, power of feed motor: 2,200 W, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,350 mm, Five-belt calibration and fine grinding system, top and bottom grinding for solid wood or wood materials Factory overhauled to the latest standard Rodpovy Dt Nefx Amyecd 5 sanding units (2x calibration roller top / bottom + cross sanding unit, 2x segment sanding pads, 1 of which includes a unique diagonal sanding unit (patented KÜNDIG Brilliant technology)), as well as the KÜNDIG Enormatic control for automatic workpiece feeding. Machine completely overhauled - for more information see appendix

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, grinding belt length: 2,150 mm, input current: 39 A, Wide belt sander SCM suitable for calibration/sanding of solid wood, veneer and lacquer base. Model: Sandya 600 RCS Working width: 1.100 mm Working thickness: 4-170 mm Main motor: 15 kW (invertor) Abbrasive belts speed: 3-16 m/s (inverter) Feeding speed: 3-18 m/min (inverter) Abbrasive belts length: 2.150 mm Aggregates: 1. Steel calibrating roller R (diam. 140 mm) 2. Combinated unit CS: - rubber coated roller (diam. 160 mm, hardness 30Sh) - elektronic sectional pad (segments width 30 mm) 3. Sanding brush ScotchBrite (diam. 150 mm) Other equipment: - 5 idle supporting rollers at infeed - 5 supporting rollersat outfeed (1st roller motorized) - version C-Plus - pneumatic exclusion of the 1st roller - pneumatic exclusion of the 2nd roller and the pad - electronic programmator LOGIC TS with LCD touch screen 10,4" - motorized height adjustment Rsdoygddljpfx Amyocd Stat of the machine: very good Production year: 2016 Weight: 1.400 kg El. power: In=39A Machine availability: cca April 2026

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of units 15kW -from below: 2 rubber rollers, slip rollers conveyor belt 2 rubber rollers, slip rollers grinding thickness potentiometer belt blowing system pneumatic belt oscillation controlled by photoelectric sensors electric table lifting + manual (for precise adjustment) 2 feed speed types 0.3kW with pneumatic brake working pressure 6-8bar diameter of dust extraction nozzle 2x140mm overall dimensions L/W/H 1840x1650x2000mm weight 1160kg – unpainted – made in Italy – automatic shoe – 2 units – grinding thickness potentiometer Rcjdpszin Sdofx Amyed – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11640 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Industrial cross-sanding machine for high-quality surface finishing of wood, veneer, and painted workpieces. The combination of a cross-sanding and longitudinal-sanding unit enables efficient and precise processing in a continuous flow. Processing units: 1 × Cross-sanding unit with pressure pad belt 1 × Longitudinal-sanding unit 1 × Brushing unit Technical data Technical data: Sanding width: 1,300 mm Maximum workpiece thickness: 140 mm Rjdpezinviofx Amyscd Working height: 780–920 mm Feed rate: 4.5–22 m/min Cross-sanding belt: 4,900 × 150 mm Pressure pad belt: 4,650 × 140 mm Longitudinal-sanding belt: 2,620 × 1,350 mm Brush roller: Ø 150 mm Workpiece vacuum clamping system: 7.5 kW Total connected load: 44 kW Machine weight: approx. 3,850 kg

Condition: ready for operation (used), Year of construction: 1977, Wide belt sander Bütfering Rjdjndcctopfx Amyocd see pictures Machine is immediately available Machine ran until a few days ago without problems in production but was very rarely used

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA - max. width of the workpiece: 970mm - max. height of the workpiece: 160mm - 2 units - 1) ribbed rubber roller - 2) two metal rollers + shoe - motor power of unit I and II: 11kW - total power: 12kW - brake * from above: - metal roller, slip - pressure roller - unit - metal roller, slip - pressure roller - unit - metal roller, slip * from below: - rubber roller, slip - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 feed speed settings - feed motor approx. 0.75kW - working pressure: 8-10 bar - diameter of the extraction nozzle: 2x160mm - overall dimensions (L/W/H): 1600x1500x2000mm - weight: 1370kg ADVANTAGES - Made in Italy - 2 units - Unpainted - Used sander, very good condition Rsdpfsziaxvex Amyecd Net price: 21900 PLN Net price: 5200 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary with higher fluctuations)

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Rcjdpfozh Rufjx Amyod Features and technical data: MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT ROLLER, 2ND BELT COMBINATION UNIT ROLLER/SHOE FOR SOLID WOOD, VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING SHOE WIDTH mm: 50 - MAIN BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER hp: 0.75 - Infinitely variable feed belt gearbox, speed adjustable m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR hp: 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed Availability: short notice Location: Flörsheim