Used Dmmet Group Single Panel for sale (22,717)

Condition: excellent (used), ROLLER COATER with SINGLE SPREADING-COATING ROLLER Ndsdsgz Swwepfx Ab Aec Max working width mm 1300 Length of the machine mm 900 (ca.) Thickness of the panels (working height): mm 3 - 80 Adjustable feeding speed: m/min 4 -20 PLC control pane Separate (from the machine's body) electric and command cabinet Total installed power KW 8 Equipped with: 1°) Dosing unit (Chromium plated Doctor roller diam. mm 173, KW 0,75 ca.) 2°) Coating unit (Rubbered spreading roller diam. mm 250 (ca.) KW 0.75, with a rubbered bottom roller, counter-placed to the top one (diam. mm 182 ca., (ca.) KW 0,75)

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Ndedey Su Efspfx Ab Aec

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC Njdozvq Rcepfx Ab Aodc The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Ndsdpodg Itnefx Ab Ajc Panels (workpieces) feeding by No. 3 motorized belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 50 Motorized carpet to evacuate chips and wastes Total installed power (Kw) 60 WORKING GROUPS (BOTTOM) Drilling heads with vertical spindles: No. 6 Indipendent vertical drilling spindles: No. 40 x 6 heads (tot. No. 240 spindles) Drilling head motor power: No. 6 x Kw 2,7 WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles: No. 4 (4 x Kw 2,7) Horizontal drilling spindles - Right side: No. 13 x 2 heads (tot. No. 26 spindles) Horizontal drilling spindles - Left side: No. 13 x 2 heads (tot. No. 26 spindles) Inserting nozzle and glue injectors (Right side): No. 8 (high-pressure) Inserting nozzle and glue injectors (Left side): No, 8 (high-pressure) Storage tanks for automatic feeding of the dowels: No. 2

Condition: new, Year of construction: 2026, functionality: fully functional, Underfloor repair frame for bodywork UL-L133A 3T TM-GROUP COMPLETE SET: FRAME + SCISSOR LIFT + NECESSARY ACCESSORIES!! Specifications: ✅ Manufacturer: TM-GROUP Nedpfx Aboth Ukts Aedc ✅ Power supply: hydraulic ✅ High-quality hydraulic pump ✅ Frame length: 7000 mm ✅ Frame width: 4000 mm ✅ Height: 500 mm ✅ Sturdy and easy car mounting ✅ Universal for all post-accident repairs ✅ Warranty ⭐️ STEEL REPAIR FRAME Our manufactured repair frames allow for quick and fully professional repair of car bodies after accidents. The repair frame is made of thick-walled closed profiles, which guarantees the rigidity and strength of the structure during car repairs. ⭐️ SCISSOR LIFT - Electronically controlled - Profile: 280 mm - Length: 2260 mm - Width: 680 mm - Height range: 280–1460 mm - Max lifting height: 1800 mm - Lift capacity: 3000 kg - Mounting: in the floor - Type: scissor lift, single actuator - Maximum arm working angle: 90° - Electronically controlled - Easy disassembly and installation - Low failure rate - Intended use: mainly as a central lift - Ideal for tire changes and chassis repairs ⭐️ NECESSARY ACCESSORIES - Pulling tower (working): 1 set with foot pump - Mounting towers: 2 sets - Hand pump: 1 piece - Sill clamps: 1 set (4 pieces) - Standard accessories: as shown in the picture

Year of construction: 2007, condition: used, machine/vehicle number: EKP 84325-81, OPTICAL SORTER FOR CONTAMINANT SEPARATION - SORTEX by Bühler Type: MEAF DevCtrl Year of manufacture: 2007 Advanced optical machine designed for automatic sorting of bulk products, primarily foodstuffs, by color, shape, and structure. Nsdpjyv Aitefx Ab Ajdc The unit is mechanically functional. Calibration required. Quoted price does not include transport.

Condition: excellent (used), Year of construction: 2010, Cylindrical grinding machine Fab. Robbi Group Typ. Omicron 600 RT5 Year 2010 Technical data Make Robbi Group, IT Type OMICRON 600 RT5 Year of manufacture 2010 table Center width 600 mm Sanding length max. 600 mm Swivel range + 9° / - 5° Center height above table 160 mm Workpiece weight between centers 120 kg Workpiece weight for fly grinding 40 kg Tailstock Quill stroke 25 mm Quill diam. 43 mm Internal mounting cone CM 4 Ndedpfewhm Rfex Ab Asc Workpiece headstock Rotation speed 0 - 600 Internal mounting cone CM 4 Spindle passage 26 mm Grinding wheel Diameter 450 mm Width min 20 / max 50 mm Bore 127 mm Equipment - Manual or automatic cycle - Automatic dressing compensation - Simplified presetting of grinding wheel and workpiece All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), functionality: fully functional, mileage: 97,782 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,200 mm, overall weight: 2,800 kg, empty load weight: 1,930 kg, maximum load weight: 870 kg, first registration: 07/2021, next inspection (TÜV): 02/2028, emission class: euro6d-temp, color: white, driver cabin: other, number of seats: 3, number of previous owners: 1, Year of construction: 2021, machine/vehicle number: FODZ2021, Equipment: ABS, air conditioning, airbag, all-season tires, central locking, cruise control, disability-friendly, electronic stability program (ESP), navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, truck registration, HIGHLIGHTS & PACKAGES BlueEFFICIENCY package 2-way front speakers ASSISTANCE SYSTEMS Mercedes-Benz emergency call system Breakdown assistance ATTENTION ASSIST PARKTRONIC ECO start/stop function Cruise control (TEMPOMAT) Headlamp assistant ENGINE, TRANSMISSION & CHASSIS 6-speed manual transmission TSG 380 Standard chassis AUDIO & COMMUNICATION Audio 30 Communication module (LTE) for digital services Digital radio (DAB) INTERIOR Ndodps Aflvvjfx Ab Aec Caluma fabric, black Lockable glove compartment Instrument cluster with pixel matrix display Interior trim, cargo compartment, panels on top LED light strip in the cargo compartment Comfort overhead control panel Lumbar support for driver's seat Airbag for front passenger Semi-automatic TEMPMATIC climate control system Comfort driver's seat Wooden flooring Passenger seat, single seat Tie-down rails on side wall, attached to the railing strap Solid partition Steering wheel adjustable for inclination and height Multi-function steering wheel with trip computer Attachment points in the roof frame Interior trim, cargo compartment, side LIGHT & VISION Adaptive brake light Fog lights, halogen TECHNOLOGY & SAFETY Hill-start assist Multi-button remote control Pedestrian protection Seat belt warning system for passenger seat EXTERIOR Heat-insulating glass all around Heated and electrically adjustable exterior mirrors Rear door, two-leaf, 180 degrees, without windows OTHER EQUIPMENT Mercedes-Benz MobiloVan with roadside assistance and extended warranty Service interval 40,000 km Electrical system for trailer socket Vehicle registration certificate, part II Model series C447 Vito/V-Class Main fuel tank 57 liters Generator 14 V / 250 A Signage / printed material, German Basic Approval as a truck Model revision Panel van Generator management Buffer battery for starting Emission class Euro 6D-TEMP N1 Gr.III/N2 Absorbent glass mat (AGM) battery 12 V 92 Ah

Condition: ready for operation (used), functionality: fully functional, PANEL SAW Carriage length: 1600 mm Cutting height: 75 mm Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Spindle diameter: 30 mm Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Ndsdpfxszz N Nne Ab Aoc Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Conventional knives HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016

Condition: good (used), Year of construction: 2013, Sorter for Light Loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 Trays, with 261 Target Configuration – Used – : Sorter price incl. control system: ex-works: €99,500 (net), including dismantling, packaging and loading! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Model: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control system: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6,000 trays/h Total system length: 53 m Total system width: 14 m Number of induction stations: 1 Induction station width: 2 m Number of trays: 200 pcs Usable size per tray: 450 x 700 mm Tray pitch: 520 mm Chute width: 680 mm Number of drives: 3 pcs Product dimensions (L/W/H): Sorter: min.: 150 / 120 / 10 mm max.: 600 / 400 / 200 mm Weight: min.: 0.25 kg / max.: 5 kg No longer available: the roller conveyors, pick-by-light system, flap elements. There were two targets per sorting station, sorted into the upper or lower target roller conveyor via tilting chutes. Total number of targets on the sorter: 261 targets in the system. Number of targets for special purposes (overflow, reject, etc.): 3 pcs. A pick-by-light system is installed on the target roller conveyor. This means all components installed downstream of the trays after discharge are no longer present and are therefore not part of the sale! Condition: good Available: immediately Location: warehouse in Frankenberg/Saxony Detailed description available on request as PDF (in English). Nodpfewxu A Rex Ab Asdc

Condition: good (used), Description: Nodpfx Abez S Hw As Aedc The machine is in good technical condition, and a test run is possible upon prior agreement. Tooling included. Distance between uprights: 3,700 mm. Stroke: 320 mm. Maximum opening between table and ram: 535 mm. Upright overhang: 510 mm. Width of work table: 90 mm. Approach speed: 140 mm/s. Working bending speed: 10 mm/s. Return speed: 140 mm/s. Range of back gauge X: 820 mm. Range of R-axis: 150 mm. Main motor power: 18.5 kW. CNC control: Delem DA-65. Lubrication: central. Weight: approximately 20,800 kg.

Condition: good (used), functionality: fully functional, REF: MM6466 Ndsdpjzudu Sofx Ab Aoc 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Model - SB-40 EU. Serial number - 218-2527-23 Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left.

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Ndodpot R T Hcjfx Ab Aoc Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: STERIVAP 6612, For sale is a BMT STERIVAP 6612 steam sterilizer from an active food production facility. The autoclave was originally designed for medical applications and is currently used successfully for sterilizing beverage bottles. Up to 350 bottles are processed per sterilization cycle on specially adapted transport trolleys. The unit features integrated steam generation, a modern Siemens control system with a touchscreen, and programmable sterilization cycles with stored programs for temperatures above 121 °C. The system is in very good technical condition. The heating elements have been replaced, wear parts have been regularly exchanged, and all maintenance has been performed on an ongoing basis. The autoclave is currently in daily operation and can be inspected under production conditions until August 2026. Further details: Usable volume: 610 liters Pass-through design Integrated steam generation Siemens control system with color touchscreen Display currently set to Polish, other languages possible Programmable sterilization cycles Stored programs > 121 °C Heating elements replaced Regular maintenance Wear parts regularly replaced 1 transport trolley included Additional transport trolleys available Ndsdpfx Aezccuneb Aoc Currently used in a food processing facility Inspection possible during operation Available from 01.09.2026 Location: 58-508 Siedlęcin, Poland Price: €20,900 (negotiable).

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Sterilization process: Vacuum-assisted steam sterilization Sterilization temperature: 121–134 °C Vacuum cycles: Pre- and post-vacuum Volume: 644 l Chamber material: Stainless steel AISI 316L Piping material: Stainless steel AISI 316L MACHINE DETAILS Control: PLC-based control system Operation: HMI touchscreen Monitoring: Real-time cycle control with batch documentation Sensors: Integrated temperature and pressure sensors Standards: EN 285, PED, ISO 9001, GMP Validation: According to ISO 17665 Ndsdpfez I Ti Nex Ab Asc EQUIPMENT Stainless steel sterilization chamber with polished surface Vacuum pump system for pre- and post-vacuum Steam generation and steam distribution system PLC control with HMI touchscreen Integrated temperature and pressure sensors Diagnostics: Integrated self-test functions Media supply: Steam, water, compressed air, and power supply Door operation: Automatic Door locking: Safety interlock to prevent opening under pressure

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* Ndsdoy Ehrfepfx Ab Ajc complete with an motorized wire decoiler table diamtere: 1.500 mm loading capacity: 1.500 Kg.

Condition: refurbished (used), Year of construction: 2014, operating hours: 20,000 h, DG Tech – Authorized BLM Group Inspection Center DG Tech was established as a spin-off from DGService to specifically address the market for used BLM Group machines. Leveraging our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. We manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high-quality standards. We handle logistics, disassembly, and transportation directly, eliminating the risks associated with private sales. In partnership with BLM Group, we provide dedicated software, technical training, and post-sales support. We also offer flexible operational leasing solutions to optimize investment and productivity. Ndedpfxezhw H Ie Ab Aec Configuration: BEAM LOADER L=6500mm, UNLOADER 4500 mm, ROFIN DC 020 LASER SOURCE, CHILLER, LT120 EXHAUST SYSTEM, LT120 WELDING SEARCH OPTICAL SYSTEM, INTEGRATED MICRODOSING.

Condition: used, Year of construction: 1994, Main Group Vilor injection molding machines for manufacturing plastic components; previously used for production of soles and components for footwear manufacturing; option to additionally purchase molds for shoe soles with the machines; machines were operational until the end and have been unused for 4 years; good condition, require refurbishment; Ndedey Egvpopfx Ab Ajc

Condition: excellent (used), I offer a Siemens SIMATIC Mobile Panel 177 PN, a mobile operator panel designed for professional applications in industrial automation. The device provides convenient operation and control of machines and production lines from a portable operator panel. Technical specifications: • Manufacturer: Siemens • Model: SIMATIC Mobile Panel 177 PN • Catalog number: 6AV6645-0BB01-0AX0 • Communication interface: PROFINET (PN) • Color TFT touchscreen • Programmable function keys F1–F14 • Built-in manipulator / control knob • Long connection cable with a multi-pin industrial connector • Made in Austria Condition: • Used item • Screen without cracks or mechanical damage • Normal signs of use and storage are visible Nodpez Sm I Aofx Ab Ajdc • Housing in good technical condition • Sold as is, according to the condition shown in the pictures • Full testing is not possible – sold as untested Application: • CNC machining centers • Production lines • Industrial robots • Siemens SIMATIC automation systems • Assembly and production workstations Included: • Siemens SIMATIC Mobile Panel 177 PN • Original connection cable with an industrial connector

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, TECHNICAL DETAILS General Information Machine Type: Single-column eccentric press Machine Weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke Rate: 120 strokes/min Stroke and Operating Data Overhang: 250 mm Neds Achxbopfx Ab Aedc Stroke: 8–100 mm Installation Height: 330 mm Ram Adjustment: 63 mm Table and Clamping Surfaces Table: 715 × 500 mm Clamping Plate: 700 × 480 mm Die Opening in Table: 240 mm Die Opening in Clamping Plate: 110 mm Ram Clamping Surface: 450 × 280 mm Tilting Design Tilting Stages: 4 Die Opening to the Rear: 325 × 500 mm Die Opening Downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space Requirement: approx. 1.2 × 1.7 × 2.7 m EQUIPMENT Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Piece counter Various accessories

Condition: excellent (used), Deburring machine KEIL-SINGLE Brush deburring machine Deburring machine Keil Single2 Workpiece support adjustable vertically and horizontally Machine rests on rubber feet (very smooth running) Prism for guiding round tubes included as standard Dust extraction port included as standard Nsdpfx Asztwwdsb Aedc Brush diameter standard 250 mm (optional 200 mm and 300 mm) Brush width standard 60 mm (optional 20, 40, 80 and 100 mm) Brush replacement can be done quickly, as only one screw needs to be loosened and secured. Technical data Dimensions: Length 520 mm, Width 570 mm, Height 460 mm, Weight 50 kg Brush diameter: 200-250-300 mm variable Brush width: 20-40-60-80-100 mm variable 2 speeds: 3000/1500 RPM, Power: 3.0/2.0 kW Voltage: 400 V/50 Hz Application area The deburring machine deburrs hollow profiles in 2 – 3 seconds, simultaneously on the inside and outside in a single operation. Equipment Motor with pole change: 1500/3000 RPM Motor protection switch for both speeds CE marking Maintenance The machine design requires no maintenance (brush deburring machine). Keep the machine clean. Check the tightness of all connections. Ensure the holes on the back of the machine for ventilation are kept clear. I also have about 5 spare brushes with me.

Condition: excellent (used), Panel Beam Saw - With rear lifting table Ndsdpfx Abezxn Eco Aec Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 Cross-chains for transporting panel packs in the lifting table Lifting scissor table (mm) 4300 x 1600 Rear pushers (N.) 1 with clamps / grippers 12 Turning device (rotating unit) at 90° Max. cutting width (mm) 4300 - Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 (3 x 2160mm x 650mm + 1 x 2160mm x 800mm) Total power (Kw) OPTIONAL: 200062) Automatic unloading system for cut panels and stacking system AUTOMATECH ROBOTECH with Robot KUKA Mod. KR 470-2 PA

Condition: used, Year of construction: 1970, No minimum price – guaranteed sale to the highest bidder! Ndjdo Aa Nahjpfx Ab Asc Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 t Stroke: 250 mm Travel: 8–100 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight: approx. 3.5 t Table and ram Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 × 280 mm Ram adjustment: 63 mm EQUIPMENT No information available regarding accessories.

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 1731124010219J, Allpax Angle Sealing Device / Packaging Machine Manufacturer: Hualian Machinery Group Model: PTHW-WS-5045 Serial No.: 1731124010219J Year of Manufacture: 01/2024 Condition: used Color: light grey Internal Item Number: 2025120105 Pick-up Address: Industriestraße 5 (47918 Tönisvorst) The machine was in operation until dismantling. Tailor-made Solutions for Your Intralogistics Ndsdex Ak Nrspfx Ab Aoc For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, as well as packaging machines, we are your competent partner! We are happy to provide you with an individual offer or advise you on system design or installation queries. Simply let us know your requirements and site conditions. Benefit from our years of experience and excellent network of experts. We have already successfully completed projects for companies in a variety of sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will find ways to optimise your processes and material flow cost-effectively and sustainably. We can also offer fully automatic sorting systems or complementary components, such as picking racks or containers.

Condition: good (used), functionality: fully functional, We are selling our chip conveyor in technically and visually perfect condition. Njdpszxbgtofx Ab Aodc