Used Concrete Block Making Machine / Briquett for sale (70,731)

Condition: used, Hard stone plate, granite plate, granite block, measuring cube Hard stone block, angle block, precisely machined on all sides Bedpfx Ash Uhq Delbjwt The granite plate comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W x H: 1350 x 300 x 245 mm Working height approx. 700 mm - 5 support blocks with leveling screws, approx. 400 mm - 8 threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushings M16 - small chip on one plate edge Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of the measuring plate: 1500 kg Weight of the granite feet: 100 kg Very good condition

Condition: used, Year of construction: 1987, functionality: fully functional, shaft length under head: 160 mm, thread length: 85 mm, total width: 2,800 mm, total length: 7,800 mm, bar diameter (max.): 16 mm, Machine is complete bolt making machine with pointing and threading. Bsdpoztrpnefx Albswt

Condition: refurbished (used), WP Formprofi Bwsdpstrwfuefx Albet

Condition: good (used), functionality: fully functional, Production line for sealed block bottom bags and standard paper bags. Upon request, we can sell you only the paper bag machine. The necessary parts are available. The sealing unit can also be used offline without the bridge. Pre-printed bottom sheet Self-adhesive bottom sheet In-line coding printer Material: Paper and composites Format: Bag width: 140 mm - 320 mm Bag length: 240 – 900 mm Bottom width: 70 – 180 mm With servo drive - Bwedpfszgwniex Albst Block bottom standard materials: Uncoated paper: 70 g/m² and 100 g/m² Coated paper: 80 g Plastic films (LDPE): 40 µ, 70 µ and 100 µ PE-coated paper: Pa 60 g/m² + LDPE 40 g/m² airsickness bags: Pa 65 g/m² + LDPE 23 g/m² Paper-aluminum-PE composite: Alu 8/25 and Alu 8/50 PET/Alu/PE composite: PET 12 µ / Alu 8 or 9 µ / LDPE 90 µ - Possible materials Outer layer Coated paper 60–120 g/m² Over 100 g/m² only in large format Inner layer LDPE mono-film 0.03–0.10 mm (possibly needled) Alternatives: LDPE 0.08–0.12 mm OPP 20–40 µ PE-coated paper (various combinations) Aluminum foil on carrier paper with PE coating Construction from outside to inside 30 g/m² bleached kraft paper 12 g/m² PE 0.008 mm aluminum foil 25 or 50 g/m² PE Intermediate layer (only with material 21) Alternative: Bleached kraft paper 80–100 g/m² Brown kraft paper 80–100 g/m² LDPE 80–100 µ

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, Part of a Lisec DGU line 2.5 x 2.0 m, 1992-1994, consisting of: Bwjdpfortp D Aox Albot RSV-27/25, 1992, frame set section PSL-25/20, 1994, assembling station Both machines are in working order and can be seen in our warehouse in Hofkirchen/Austria

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024. New electrical system. Bodpfx Alotxni Nsbjwt Operational, working. Available for any test. Number of die: 1 Number of pieces per min.: 300 Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg.

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, We are offering this used KÖNIG CertoPan M roll production line, manufactured in 2018. Model: CertoPan M Year of manufacture: 2018 Machine no.: 32.1.0103 Power: 3 kW Rated voltage: 3x400+N V Bwsdpjznm Unsfx Albet Rated current: 6 A Frequency: 50 Hz The system is currently still in daily use and is in fully functional condition. All service and maintenance work, as well as any necessary repairs, have been and will continue to be carried out regularly. An inspection of the running system is possible at any time by arrangement. The system is expected to be available from spring 2027. If you are interested or have any questions, we look forward to hearing from you. If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, working height: 640 mm, input voltage: 400 V, overall weight: 3,200 kg, type of input current: three-phase, Equipment: documentation/manual, Maximum unit length: 4000 mm x 2500 mm (height) Minimum unit dimensions: L320 x 180 mm Bwedpfxjzduhue Albst Minimum unit thickness: 12 mm (3+6+3) Maximum unit thickness: 65 mm; unit pane between 3-25 mm, and spacer between 6 and 24 mm. Maximum unit weight: 200 kg/m Optional: custom shapes and triple units.

Condition: used, Year of construction: 2000, functionality: fully functional, production capacity: 520 unit/h, Remaining part of the advertisement: We offer for sale a complete, fully functional production line designed for the manufacture of pallet supports from wood shavings. The line is currently in operation at a production facility and remains in continuous operation, allowing potential buyers to view it during the actual production process. Item for sale: A technological line used for the production of pallet supports molded from wood shavings and a binder, used in the production of transport and industrial pallets. Key advantages: • High repeatability of dimensions and product quality • Stable and proven production technology • Possibility of multi-shift operation • Low proportion of manual labor in the process • Ready for continued operation without the need for lengthy downtime. Technical condition: The line is currently in use and maintained in operational condition. All key equipment remains in good technical condition and is regularly serviced. This allows potential buyers to: • View the line in operation • Assess the quality of the produced supports • Verify the process efficiency under real production conditions • Familiarize themselves with the organization of the technological process. Scope of sale: The offered line includes the equipment necessary to conduct the production process, including, among others: • Raw material preparation system • Material dosing system • Forming and pressing equipment Bwjdpjzt Iypofx Albet • Technological transport systems • Control and automation system • Auxiliary equipment related to the pallet support production process. A detailed technical specification will be made available to interested parties. Possibility of presentation: It is possible to arrange a technical visit to the facility and view the line during normal production. Upon request, we provide additional technical information, photos, and video materials. Sales conditions: Location: Gorczenica Delivery date: to be agreed Form of sale: complete production line For further information or to arrange a presentation, please contact us: Contact person: We invite you to contact us and view the line during production. Thanks to the possibility of a "live" presentation, the buyer can accurately assess the technical condition of the equipment and the efficiency of the entire technological process.

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 Bwjdpfx Alswbvmiobot V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg Bwodozv U Tbspfx Albet • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors • Controller: Syntec controller (machine can be moved on-site) • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Condition: used, Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 900 E -Power: 1.5 / 1.8 kW 1400/2850 rpm -Plate diameter: 835 mm -Transport dimensions: 1200/1000 / H1260 mm Bjdpfshgm Ekjx Albowt -Weight: 81 kg

Condition: excellent (used), Year of construction: 2016, Blockmold body, tightly welded, annealed, machined, and pressure- Bwsdpfxjpwbmbs Albet tested, executed according to European Standards and P.E.D. - 97/23/EC heat-resistant steel for steam pressure boilers Maintenance platform with ascent aid and fall protection. Block dimensions: • Height: 4,100 mm • Depth (usable depth): 1,300 mm • Width: 1,040 mm • Block gross volume: 5.5 m³ Cycle times: • 12-16 g/l density - 20-22 blocks/hour • 17-19 g/l density - 18-20 blocks/hour • 20-23 g/l density - 16-18 blocks/hour • 24-28 g/l density - 14-15 blocks/hour • 29-35 g/l density - 12-14 blocks/hour Filling system: • Filling silo volume - 1 x 10 m³ • High-pressure suction blower - 11 kW • Number of filling pistols - 2 pcs. • Filling diameter - 300 mm • Drive - hydraulic Mechanics: • Hydraulic system - 15 kW • Demolding - hydraulic • Door movement - hydraulic Electrical equipment: • Servo inverters: Mitsubishi • Frequency inverters: Mitsubishi • PLC: Siemens Simatic • HMI panels: Siemens Simatic • PC: Axiomtek

Condition: ready for operation (used), A bottom-seal bag/sack welding machine Stiegler is available. Film width: 1050mm, section length range: 90mm-650mm, max. operating cycle: 140/min, max. film web speed: 80m/min, max. roll diameter: 800mm, max. web speed: 60m/min, core diameter range: 76mm. Machine dimensions X/Y/Z: approx. 6000mm/1700mm/1600mm, weight: approx. 3400kg. Including 2 welding bars, punching device and Euro hole punching. The edge control of the machine is defective. Documentation available. An on-site inspection is possible. Bwjdpjy D Trzefx Albst

Condition: repair required (used), functionality: unexamined, Year of construction: 1990, overall weight: 92,000 kg, load capacity: 20,000 kg, working height: 8,500 mm, Equipment: documentation/manual, Two rail-mounted electric container gantry cranes are offered for sale from an industrial site in Riga, Latvia. The cranes were designed for loading, unloading, transferring and stacking ISO 1C and 1CC containers. Their 20,000 kg rated lifting capacity, 25 m span and powered travelling trolley make them suitable for container terminals, railway yards, ports, logistics hubs and industrial storage areas. The cranes were manufactured in 1990 by KRAN / Uzlovsky Machine-Building Plant in the Tula region. The factory type designation is 20-25-8.5-5. Two units are available. EQUIPMENT AND DOCUMENTATION Bwjdpjzmtciefx Albst Rail-mounted gantry structure with electrically driven crane travel mechanism. Powered travelling trolley and main hoisting mechanism. Operator cabin control. The factory passport specifies a rotating 20 t container spreader for ISO 1C and 1CC containers; A technical passport for factory no. 029 is available in Latvian and Russian, including historical inspection and repair entries. Further technical information and detailed photographs can be provided on request.

Condition: refurbished (used), Split into 30 bites Weight range: 32-70 g/piece. Adjustable height of rounding space including 3 plastic rounding plates Bwodett Am Ropfx Albot complete gearbox in oil bath 400V - 3 Ph - 50 Hz motor serial motor protection head opened for cleaning condition: very good (after general overhaul) Quantity of dough per tray (grams): 960-2100 Length x width x height (mm): 800 x 690 x 1470 Power (kW): approx. 1.6 Net weight (kg): 540

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 4633, total width: 1,800 mm, total length: 10,000 mm, total height: 2,140 mm, Working machine in exellent condition from German production Bwedpfx Aszhk Avjlbet System consists of 1 x Honsel type: F13, serial number: 4633 1 x Fischer & Kreck, type Combi C/11B Production speed of 180 pieces per minute and runs with a voltage of 400 V. Overall dimensions: approx. 1000 x 180 x 214 cm (L/W/H) including 1 x Gluematick type: GHK, 1 x cabinet with contents and accessories

Condition: used, Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 700 E -E-motor: 2.0 / 1.35 kW -Plate diameter: 700 mm -Transport dimensions: 1040/780/H1300 mm -Weight: 69 kg Bedpeg T I Nwofx Albewt

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, total width: 1,740 mm, total length: 815 mm, total height: 1,650 mm, type of input current: three-phase, Roll forming line Lippelt Mini-Rustica GST Head machine for square specialty rolls Model: Mini-Rustica GST with guillotine and punching device including 2 longitudinal cutting rollers, 3 and 4 rows Band mehler for infeed belt Touchscreen control Stainless steel design Bwedpfx Ajyv U Eaelbot Rumo seed station Machine is mobile Connection 400V, 16A CEE plug Dimensions: 1740 x 815 x 1650 mm, WxDxH Used machine

Condition: as good as new (ex-display), Demonstration Machine The new 70F briquetting press from Holzprofi impresses with its sophisticated, simple, and robust design. The press is designed for commercial and industrial applications. Made in the EU! Technical data: Motor output (continuous duty): 7.5 kW Briquette diameter: 70 mm Bwedpevr I N Sjfx Albet Power consumption approx.: 4900 W/h Output capacity: 60–80 kg/h Chip hopper: 0.75 m³ Weight: 810 kg Briquette density approx.: 900–1100 kg/m³ Sound pressure level: less than 70 dB Dimensions: 2220 x 1200 x 1510 mm Standard special equipment: Automatic shaft rotation direction reversal Automatic shutdown Sample image! Price subject to change. Errors and omissions excepted.

Condition: like new (used), HEMA Automatic Monoblock – Filler + Capper – ZALKIN – Stainless Steel HEMA / ZALKIN automatic filling and capping monoblock, designed to integrate the dispensing of the product and the subsequent placement and closing of caps into a single machine for industrial packaging lines. The unit combines a HEMA filler with a ZALKIN capping system, synchronizing both operations through a compact rotary configuration. The containers are automatically transported between the different stations, reducing transfers and providing a continuous filling and closing process. Its construction, primarily in stainless steel, complete enclosure, and integrated control panel make it particularly suitable for professional applications in the food and beverage industries. MAIN FEATURES -Filler manufacturer: HEMA -Capper manufacturer: ZALKIN -Type: Automatic monoblock filler + capper -Integrated operations: filling and closing -Industrial rotary configuration -Automatic container feed -Synchronized positioning and transfer -Multiple filling stations/heads -Automatic product dispensing -Automatic cap feed system -Rotary ZALKIN capper -Multiple closing heads -Automatic infeed and outfeed -Control panel with HMI -Construction primarily in stainless steel -Complete enclosure with transparent safety doors -Hygienic design for the food industry -Prepared for continuous industrial operation -Integrable into complete packaging lines PROCESS The containers automatically enter the monoblock and are positioned in the HEMA filling section, where the different stations perform the product dispensing. Once filled, the containers are synchronously transferred to the ZALKIN capper. The caps, previously fed and oriented, are placed on the containers and then closed by the corresponding heads. The finished containers exit continuously to the next stage of the line. It can be integrated with: -Container depalletizers -Rinsers/washers -Product feeding systems -Cap feeders and orienters -Conveyors -Weight checkers -Inspection systems Bodpfx Asynkdzslbjwt -Labelers -Coders -Cartoners -Palletizers APPLICATIONS Particularly suitable for food industries, manufacturers of sauces and condiments, preserves, beverages, and other liquid or semi-liquid products that need to automate filling and closing simultaneously. Compatibility with products, filling volumes, container formats, and cap types will depend on the configuration and tooling currently installed. The combination of HEMA filling technology and ZALKIN capping in a single monoblock provides a compact and automated solution for industrial packaging lines. Machine available for inspection. Additional technical information, formats, capacities, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), functionality: fully functional, input voltage: 400 V, working width: 320 mm, total width: 2,300 mm, total length: 750 mm, total height: 1,370 mm, DGUV certified until: 07/2027, type of input current: three-phase, Lippelt Mini Rustica roll production line for all types of specialty rolls stainless steel design simple and efficient production of square dough pieces machine is mobile Bodjyy Scqepfx Albjwt connection: 400V, 16A-CEE plug dimensions approx.: L 2300 x W 750 x H 1370 mm used machine Optional: Rumo seed dispensing unit maintenance contract delivery service training and commissioning We have many other machines in stock!

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, For sale is a professional, compact roll fermentation cabinet system from Werner & Pfleiderer (WP), model Super-B. The system comes from a working bakery and is the ideal solution for artisan businesses that want to achieve high and consistent roll quality in a compact space. Perfectly suited for the efficient production of sliced rolls, Kaiser rolls, and round rolls. The roll system has a side discharge which can be used for other machines. Advantages & Features: • Compact design: Extremely space-saving and ideal for bakeries with limited space. • Gentle dough processing: Ensures excellent dough piece quality and optimal dough development. • Reliable WP quality: Robust bakery technology designed for daily, heavy-duty use. • Versatile: Ideal in combination with a WP Multimatic head machine. Technical Data & Condition: • Manufacturer: Werner & Pfleiderer (WP) • Model: Super-B • Condition: Used, with normal signs of wear and tear commensurate with its age. The machine has operated reliably until recently. • Year of Manufacture: 2021 • Power Connection: 400 V / 50 Hz Sales Conditions & Price: • Price: €30,000.00 net (plus 19% VAT) • Invoice: You will receive a proper invoice with VAT shown. • Warranty: The sale is of a used machine to commercial customers, excluding any warranty, guarantee, or right of return. • Appointment for viewing can be arranged. • Shipping/Collection: Collection and dismantling by the buyer only. Optional: A forklift is available on-site to assist with loading. Bsdpfezlxc Eox Albjwt The information in the advertisement is non-binding and does not constitute guaranteed characteristics. The seller is not liable for typographical, data transmission, or input errors. Subject to changes, errors and prior sale. Only the agreements in the purchase contract are binding.

Year of construction: 1977, condition: good (used), Technical Details : - Wire diameter range - 1,2 - 2,0 mm - Nails length - 10 - 50 mm - Power - 2 Kw - Speed - 440 nails/ min. Machine reconditioned Bsdehbr Tlspfx Albowt

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 30-009, warranty duration: 6 months, total width: 660 mm, total length: 2,215 mm, total height: 1,620 mm, type of input current: three-phase, overall weight: 360 kg, year of last overhaul: 2025, GULLIVER IRIS 20 Dough Divider The Iris dough divider is designed for dividing both soft and hard dough. This machine is suitable for any bakery, providing precise and consistent portioning. The machine is equipped with an interchangeable blade system (from 1 to 6), allowing the weight and shape of the portions to be adjusted to suit specific products. The control panel with a computer allows for the operation of up to 30 programs. Portion weight range (depending on the number of blades): from 30 g to 1200 g Standard equipment: 1–3 stainless steel cutting blades flour dispenser restart system Optional equipment: 4–6 cutting blades, special blades Bwjdpfxezuzx Ij Albet