Used Commercy Mac 5 for sale (87,659)

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpm Movement X/Y/Z : 600/650/500 mm Tool holder : HSK 63 In General: Year of manufacture:2020 Control system:Siemens 840 Dsl Travel range X/Y/Z:600/630/500 Rapid traverse X/Y/Z:120 m/min Spindle: Technologie:Motorspindeln Drehzahl:17.500 U/min Leistung:35 Nm Drehmoment:80 Nm Werkzeugaufnahme:HSK-63 Swivel mount: Technology:A-axis or U-axis with counter bearing Drive:Direct drive (torque motors) Clamping bridge: Technology:Clamping bridge with 1x NC rotary table each Drive:Direct drive (torque motors) Table diameter:Ø 340 mm Lredsz A N Ahspfx Af Sjt Max. table load:150 kg Max. fixture dimensions:Ø 675 x 450 mm Tool magazin: Technology:Chain magazine Tool changer:Pick-up Number of stations:105 Max. tool diameter:80 (160) mm Max. tool length:450 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Drive systems:Direct on all axes (linear motors) Hydraulic clamping:2x 3-circuit Chip removal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Separate cooling unit Support control:Pneumatic Tool breakage detection:Inductive Automation preparation:Profinet interface, automatic doors, automatic rinsing cycle :

Condition: used, Year of construction: 2016, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpm Movement X/Y/Z : 400/350/350 mm Spindle: Technology:Directdrive Speed:12.000 rpm Power (max.):13 kW Torque (max.):95 Nm Taper:SK40 NC-Swivelroundtable: B-Axis:-50°/+110° Lodpfxez A N Abe Af Sert C-Axis:360° Clampingsurface:ø450 mm Tableloading (max.):200 kg In general: Toolmagazine:48 Stations Rapid travers in X/Y/Z:48 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with filter and High-pressure, 30 bar Workpiecemeasurement:Touch probe, Heidenhain TS740 Toolmeasurement:Laser, Renishaw NC4 TX Setup operations:Electronic Handwheel Further Equipment:Spindlechiller Further Accessory:Misc. used Toolholder

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, nominal power (apparent): 7 kVA, Number of controlled axes: 5 X-axis travel (longitudinal): 6650 mm Y-axis travel (transverse): 800 mm Z-axis travel (vertical): 525 mm B-axis rotation (vertical-horizontal): 0° to 90°, continuous C-axis rotation (perpendicular to the work plane): 0° to 360° Lrsdpfx Aezz Stvjf Set Electric spindle power at 24,000 rpm: 7 kW Number of independent work areas: 2 Tool holder taper: HSK-E 40 Tool magazine capacity: 9 + 1 Maximum dimensions of disc cutter: diameter/thickness: 300 / 5 mm Automatic positioning of vices

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Lsdpfx Afszkbirs Sort Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 712 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 515 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens und Heidenhain, workpiece height (max.): 400 mm, workpiece diameter (max.): 540 mm, workpiece weight (max.): 200 kg, total height: 3,360 mm, total length: 4,040 mm, total width: 2,770 mm, table load: 200 kg, rotary table diameter: 410 mm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, tool length: 280 mm, tool diameter: 76 mm, tool weight: 7,000 g, Equipment: chip conveyor, documentation/manual, Machine available with Siemens 828D Technical data 5-SIDE MACHINING • B/C-axis encoder • B-axis +30° to -120° • C-axis 360° • Media preparation table TOOL MAGAZINE CAPACITY • 60-position magazine (chain) • Tool diameter 76 mm • Tool length 280 mm • Tool weight 7 kg LARGE MACHINING AREA • Travel X: 712 Y: 540 Z: 515 • Swivel diameter 540 mm • Workpiece weight 200 kg • Workpiece size ⌀540 mm x 400 mm USER-FRIENDLY DESIGN • Large work area doors • Short distance to the spindle • Good access to the machining area and tool magazine EQUIPMENT • CNC control Siemens 828D (15") or Heidenhain TNC 640 • MPG handwheel • 60-position tool magazine • 12,000 min⁻¹ (taper #40), coupling • Spindle cooler • Air blow-through through the spindle • 20 bar coolant supply Ljdpszlhvhjfx Af Sert • CAN filter for chip flushing/ring cooling • Automatic central lubrication system • Media preparation table (6 connections) • Glass scales X, Y and Z axis • Chip conveyor • Direct path measuring system C/B axis • Deublin rotary union • CE specification

Condition: used, Year of construction: 2005, X-axis: 750mm, Y-axis: 600mm, Z-axis: 520mm, B-axis: 180°, C-axis: 360°, max. table load: 350kg, tool changer: 32-position, max. spindle speed: 18,000rpm, rapid traverse: 50m/min, max. feed rate: 20,000mm/min, tool holder: SK40, control: Heidenhain Mill Plus iT, spindle operating hours: 6,000h, with through-spindle coolant, chip conveyor, replacement spindle has 6,000h, X- and Y-axis guideways repaired in 2024, X-axis measuring system replaced in 2025, rotary union replaced in 2025, both chain changer motors replaced in 2025, an on-site inspection is possible. Lrsdpfjz Ea Rusx Af Sot

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, feed length X-axis: 2,040 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 760 mm, total height: 3,500 mm, total length: 7,200 mm, total width: 4,000 mm, TYC FVP 2011 CNC Gantry Machining Center with Horizontal Head Main description PEGAS-GONDA s.r.o., a manufacturer of band saws, offers for sale a TYC FVP 2011 CNC gantry machining center with an interchangeable horizontal milling head. Lsdpfx Afszp Iqao Ssrt The machine was commissioned in 2007 and has been used exclusively in our production facility in a single-shift operation. It is fully operational, connected to power, and available for inspection under working conditions. Upon prior agreement, a test machining operation and a verification of the machine’s geometric accuracy can be arranged. The machine is being sold due to the modernization of our production technology. Technical specifications Manufacturer: TYC Model: FVP 2011 Machine type: CNC gantry machining center Year commissioned: 2007 Control system: Heidenhain Travel: X-axis: 2,040 mm Y-axis: 1,100 mm Z-axis: 760 mm Working table: Table dimensions: 2,000 × 1,000 mm Maximum table load: 3,500 kg Spindle and heads: Spindle taper: ISO 50 Vertical head speed: 6,000 rpm Horizontal head speed: 3,000 rpm Horizontal head indexing: 5° Tool magazine: Automatic tool changer Capacity: 40 tools Cooling: External coolant supply Internal coolant supply Machine condition Fully operational Connected and ready for demonstration Used in single-shift operation Test machining possible by prior arrangement Geometric accuracy inspection possible Technical documentation available Optional pallet clamping system A pallet clamping system with two pallets can also be supplied. One pallet is located inside the machine, while the second pallet can be used for workpiece preparation outside the machining area. This significantly reduces setup and preparation times. Price Machine price: EUR 82,000 net, plus VAT Optional two-pallet clamping system: EUR 4,167 net, plus VAT Inspection and further information The machine can be inspected and demonstrated under power at our production facility in the Czech Republic. Additional photographs and technical documentation are available upon request. A personal inspection, test machining, and geometric accuracy verification can be arranged for serious prospective buyers. Location: Slavkov u Brna, Czech Republic Seller: PEGAS-GONDA s.r.o.

Year of construction: 2014, condition: used, ROMACO PC 4250 PROMATIC CARTONING MACHINE Horizontal continuous motion cartoning machine, for the packaging of strips, sachets, and other similar products. Built in 2014. - Leaflet folder GUK RS21/760 (from reel) - Barcode reader Laetus Argus WT10 (with integrated camera CoCam 880 for leaflets and cartons) - Hot-melt gluing Nordson ProBlue unit, with automatic refilling (capacity: up to 270 cartons per minute) - Total weight: 3100 Kg PRODUCTION - Output: up to 270 cartons/min - Carton Size Range: 20 x 15 x 60 mm (min); 120 x 80 x 210 mm (max) ENERGY REQUIREMENTS Ledpfjz Az Hqox Af Ssrt - Power requirements: 400 V; 60 Hz; 9 Kw; 3+N+PE - Air pressure: 6 bar

Condition: used, Year of construction: 2009, total height: 4,400 mm, total length: 7,640 mm, total width: 5,630 mm, overall weight: 27,000 kg, EDEL CYPORT CP 3020 – 5-Axis CNC Gantry Machining Center Technical Data: Gantry clearance height: 1,380 mm Table size: 5,000 × 2,300 mm A-axis: ±110° C-axis: ±360° Spindle power: 27 kW Spindle torque S1: 130 Nm Spindle torque S6: 170 Nm IKZ: up to 40 bar Ledpsz Dgmyjfx Af Ssrt Workpiece measuring system: M&H with wireless probe Coolant system: with band filter Direct measuring systems: in all linear axes Automatic central lubrication Spindle cooling Ethernet interface Safety features: safety bumper, light grid, and lamella curtains Travel Z-axis: 1200 - mm Dimensions (LxWxH) approx.: 7640 x 5630 x 4400 mm Travel X-axis: 3000 - mm Feed speed Y-axis: 30000 - mm/min Spindle speed: 12000 - rpm Weight approx.: 27,000 kg Travel Y-axis: 2000 - mm Feed speed Z-axis: 15000 - mm/min Tool Changer: Yes Feed speed X-axis: 30000 - mm/min Number of tool locations: 48 Control: Heidenhain iTNC 530 Year of construction: 2,009 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, TECHNICAL DETAILS - Number of axes : 5 Lrjdpfjx Tiwlox Af Sjt MILLING SPINDLE - Tool holder type : HSK-E40 - Spindle power : 10/15 [kW] - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/200/425 [mm] - Rapid traverses rates (X/Y/Z) : 40 [m/min] B ROTARY AXIS - Travel : -15/+100 [°] - Indexing precision : 0.0001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 48 TURNING SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 42 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3150 x2650 [mm] - Machine height : 2600 [mm] - Machine weight : 2500 [kg] MACHINE HOURS - Number of working hours : 22309 [h] EQUIPMENT - CNC : Fanuc 31i-Model A5 - 3 colors status lamp - Coolant tank * with cooling unit for coolant - Oil mist extractor - Bar loader : -

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 6LUD00308, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, An Era Ends: Our Last Siemens 840D on the LU 620 With the introduction of the new Siemens SINUMERIK ONE, the proven 840D control system is now available in combination with our LU 620 just once. Demonstration Machine at Used Machine Price Equipment of the Axon LU 620 - Siemens 840D – 5-Axis Simultaneous Lrodpfozdf Hvox Af Sjt - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar through-spindle coolant (IKZ) - Air through spindle - Media supply through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Blum NT A-3 Split laser tool breakage detection - Paper band filter system - Spindle ring flush system - Automatic side door - 60-tool magazine – SK40 - Scraper belt chip conveyor - Chip rinsing system - Extraction unit

Condition: used, Year of construction: 2011, functionality: fully functional, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, Matched Set of Five Brother Industrial Overlock Machines from the MASI JEANS Factory This lot consists of five Brother industrial overlock (serger) sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. Brother's industrial overlock machines are known worldwide for dependable high-speed operation, clean seam formation and low maintenance requirements. The lot combines two Brother FB-N210 4-thread overlock machines (2012) with three Brother FA-V92A-5050 4-thread overlock machines (2009) - one closely matched platform generation. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched overlock production set with common operating principles, shared spare parts inventory and simplified maintenance. Ideally suited for denim manufacturing, jeans assembly, knitwear, workwear and other applications requiring fast, durable overedging seams. Bundle Contents Machine 1 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 37B-7268 Machine 2 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 36B-7267 Machine 3 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 4B-7212 Machine 4 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 30B-7213 Machine 5 Model: Brother FA-V92A-5050-57-E3V Internal Reference: 31B-7214 Technical Specifications Manufacturer: Brother Industries, Ltd. Model Series: FB-N210 (2 machines) / FA-V92A-5050 (3 machines) Machine Type: Industrial 4-Thread Overlock (Serger) Sewing Machine Country of Manufacture: Japan 4-Thread Overlock Configuration Built-In Fabric Trimming Knife System Automatic Lubrication Industrial Sewing Tables Lredjznyx Hepfx Af Set Heavy-Duty Steel Stands Professionally serviced (ERMACO ISM service partner) Production Benefits • Factory-matched Brother overlock production set • One platform generation - common parts and know-how • High-speed overedging with clean seam formation • Reliable performance during continuous production • Reduced operator training requirements Why Purchase This Lot • Five professional Brother overlock machines • Matching machines from one factory • Complete overlock capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion Applications • Jeans production • Denim manufacturing • Seam serging and overedging • Knitwear and jersey garments • Workwear manufacturing • Uniform production • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, Year of construction: 1996, X-axis: 500mm, Y-axis: 380mm, Z-axis: 380mm, B-axis: 180°, C-axis: 360°, max. spindle speed: 15,000rpm, feed and rapid traverse: 30m/min, tool changer: 24-position, tool holder: SK40, control: Deckel Maho MillPlus, spindle operating hours: 7,000h, the original screen is defective, therefore a separate monitor is used, replacement spindle has 7,000h, spindle module and E/R module replaced in 2023, C-axis table bearing repaired in 2023, Z-axis guideways repaired in 2024, hard drive replaced in 2024, without clamping systems or tools, an on-site inspection is possible. Lredpsz Ea Rnofx Af Set

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. Lredpozvhlkefx Af Sjt The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 1,000 h, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Lredpfxexpiw Uo Af Sot Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, feed length X-axis: 762 mm, feed length Y-axis: 508 mm, feed length Z-axis: 508 mm, controller model: NGC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, 5-axis machining is an effective method for reducing setups and increasing accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centers offer cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750SS features an integrated high-speed, dual-axis trunnion table with a 500 mm diameter platter, which includes standard T-slots and a precision pilot bore for versatile fixturing. The trunnion provides +120 and -35 degrees of tilt and 360 degrees of rotation, offering excellent tool clearance and a large part capacity. Lsdpfezr U N Uex Af Sert 5-axis simultaneous machining Powerful inline direct-drive spindle High-speed trunnion table Includes a Wireless Intuitive Probing System

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Lsdsu Ixt Depfx Af Ssrt

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 1350U TRIPALET, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: Z 1350 AND 1150, Z 895, A +16°/-120°, C ±360° SPINDLE: 24,000 RPM, 38 KW, HSK-A63 (NEW) Ljdpjy Tv Nbjfx Af Sert TABLE: DIAMETER 1100, MAXIMUM LOAD 1600 KG 46-TOOL CHANGER 3-PALLET CHANGER, 1000 x 840 MM RENISHAW OMP60 PART PROBE LASER TOOL MEASUREMENT APS - Advanced Process System APS Extended ITS - Intelligent Thermal Control CINEMATIC OPTIONS CHIP CONVEYOR WITH TSC MACHINE WEIGHT: 19,000 KG

Year of construction: 2003, condition: good (used), functionality: fully functional, number of axes: 5, DS Technologie Scharmann ECOSPEED 2600/7800 5-axis high-performance machining center The machine was specifically designed for the highly dynamic machining of large-format aluminum structural components and operates with the parallel kinematic Sprint-Z3 machining head. The machine concept combines two conventional linear axes with the three-axis parallel kinematic head to enable simultaneous 5-axis machining. Manufacturer: DS Technologie Werkzeugmaschinenbau GmbH Product line: Scharmann Machine type: ECOSPEED 2600/7800 Year of manufacture: 2003 Axes: 5 Machining head: Sprint Z3 Machining head kinematics: Parallel kinematics Motor spindle: 75 kW Spindle torque: 72 Nm Maximum spindle speed: 24,000 rpm Tool holder: HSK-A63 Maximum tool weight: 10 kg Maximum bending moment of tool: 350 Nm Tool balancing quality: G 6.3 Tool clamping: Hydraulic Hydraulic pressure for tool clamping: 120 bar Lrjdpjzwhunofx Af Sst Volume flow for tool clamping: 6.6 l/min Power of hydraulic unit for tool clamping: 1.5 kW Typical application: Structural components for the aerospace industry Mains connection: 3 AC 400 V Mains frequency: 50 Hz Nominal current main machine: 500 A Control system: Siemens SINUMERIK 840 D Tool magazine: Automatic tool magazine Tool change: Automatic Workpiece handling: Integrated large-format workpiece and transport system Machine design: Fully enclosed large machine Chip removal: Integrated Hydraulic unit: Knoll Hydraulik Systeme Operation: Stationary Siemens control panel with additional handheld device The Sprint-Z3 head has three parallel linear drives and enables translational and two rotational movements via the coupled movement of the parallel mechanism. Together with the two linear axes of the machine, the 5-axis kinematics of the ECOSPEED are created. We will be happy to provide further information, videos or drawings upon request.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, MANUFACTURED IN 2014 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C, X 360º SPINDLE: 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES ON X, Y, Z 120-TOOL CHANGER ROBOT SYSTEM 3R WITH 115 PALLETS TOOL MEASURING PROBE Lrodpsy Twa Ujfx Af Set WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING UNIT

Condition: ready for operation (used), Indramat MAC 071B-0-PS-2-C / 095-A-0 three-phase servo motor SN: 14432,used, normal signs of wear, 100% functional, scope of delivery as per photos Lrsdpfju I Nnrox Af Sjt

Condition: ready for operation (used), Indramat MAC 112B-1-GD-2-C/130-A-0/SO05 – MAC 112B-1-GD-2-C / 130-A-0 / SO05 permanent magnet synchronous motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lredpfxsi D Iiro Af Set

Condition: used, Year of construction: 2019, machine/vehicle number: 138716, functionality: fully functional, power: 2.3 kW (3.13 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 900 mm, total width: 930 mm, total height: 1,850 mm, overall weight: 260 kg, Equipment: CE marking, MACPI 321.715 Industrial Garment Pressing / Finishing Machine (2019) Professional Steam-Pneumatic Finishing Machine for Jeans, Trousers & Workwear The MACPI 321.715 is a professional industrial trouser finishing machine manufactured by MACPI S.p.A., Italy in 2019. Designed for high-volume garment manufacturing, the machine combines steam, compressed air, and pneumatic tensioning to produce consistent, high-quality finishing results for jeans, trousers, chinos, and workwear garments. The unit has been used in professional garment production and remained fully operational until factory shutdown. The machine was tested and video recorded in operation on 05.03.2026. Technical Specifications • Manufacturer: MACPI S.p.A. • Model: 321.715 • Machine Type: Industrial Trouser Finisher • Year: 2019 • Serial Number: 138716 • Country of Manufacture: Italy • Weight: Approximately 260 kg • Power Supply: 400 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Pneumatic System: External Compressed Air Required • Drive System: Panasonic VF200 Inverter • Control System: Electronic Digital Control Interface Key Features • Professional steam-pneumatic finishing system • Designed for jeans, trousers, chinos, and workwear • Pneumatic garment tensioning system • Adjustable steam and air cycle parameters • Multi-zone finishing process • Digital electronic controls • Panasonic inverter drive • Foot pedal operation • Heavy-duty industrial steel construction • Designed for continuous production environments Includes • MACPI 321.715 finishing machine • Electronic control panel • Panasonic VF200 inverter • Pneumatic clamping system • Steam connection interfaces • Industrial frame • Foot pedal controls • Integrated safety guards Applications Lrjdszidfgjpfx Af Sot • Jeans finishing • Trouser finishing • Chino production • Workwear finishing • Uniform production • Garment manufacturing • Textile finishing departments • Industrial apparel production Condition • Fully functional • Previously used in professional garment production • Tested and video recorded in operation on 05.03.2026 • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, compressed air, and electrical connections, dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's industrial utility connections. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: repair required (used), Year of construction: 2009, 5-axis CNC machining center – universal – Manufacturer: RÖDERS Machine model: RXP 800 DS Year of manufacture: 2009 TECHNICAL DATA Travels - X-axis (mm): 475 - Y-axis (mm): 600 - Z-axis (mm): 400 - A-axis (swivel table): +/- 95 - C-axis (rotary table): 360 EQUIPMENT FEATURES + RC 4 automation Lodpfxozt Rd Dj Af Sert + Chip conveyor

Condition: used, Applicable material: Concrete POLYGONMACH PMC150 150m3 mobile concrete batching plant is a mobile concrete batching plant used to produce large quantities of concrete in large construction projects. These power plants are portable and rebuildable, can work with a wide range of materials and can be used for many construction projects due to their mobility. The following steps are recommended to use the POLYGONMACH 150m3 mobile concrete batching plant effectively: 1. Correct positioning: The switchboard should be installed at the easiest access point possible. It must be securely located and engineers must ensure primary resources are in place. 2. Personnel: Plant operators must be experienced and trained to ensure the best results in construction projects. Employees should be trained regularly and use appropriate protective equipment to work inside the plant. 3. Maintenance: Regular maintenance ensures longer life and efficient operation of the plant. This can reduce disruptions and prevent irregularities in mobile switchboard operations. 4. Production: In addition to their productivity, 150m3 mobile concrete batching plants have technologies that enable the production of high quality concrete. Therefore, it is important to use the right concrete mix to ensure efficient production every time. 5. Storage: The produced concrete should be stored correctly and well protected until the time of use. Ideal storage conditions will ensure safe handling and trouble-free use of concrete. Mobility: mobile Capacity: 150 m³/h Lrsdpfx Ajx D A Icjf Sot