Used Cold Jet Aero 80 for sale (19,780)

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) Rcodpouhb Twefx Ahcjf - Positive ejection (TKO) - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Belt width : 80 [mm] Rsdew H Dvpspfx Ahcscf - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: excellent (used), Weiss TS 130 Temperature Shock Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: TS 130 Machine Type: Temperature Shock Test Chamber Test Chamber Volume: approx. 130 liters Operating Hours: approx. 108.7 hours For sale is a used Weiss TS 130 temperature shock test chamber with S!MCON/32 control system. The two-chamber system enables rapid temperature changes between a hot chamber and a cold chamber. The test specimen is moved between the chambers using a lift basket. Suitable for temperature cycling and temperature shock tests, material testing, quality assurance, electronics testing, as well as research and development. Temperature Data: Temperature Range Hot Chamber: +60 °C to +220 °C Temperature Range Cold Chamber: −10 °C to −80 °C Switching Time between Hot and Cold Chamber: approx. 10 seconds Temperature Stability: approx. ±1 K Rjdpfx Ahszp D D Nscocf Test Chamber: Test Chamber Volume / Lift Basket: approx. 130 liters Dimensions Lift Basket (W × D × H): approx. 500 × 600 × 450 mm Maximum Load of Lift Basket: 20 kg Maximum Load per Insert Shelf: 10 kg Electrical Data: Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 14.0 kW Rated Current according to Nameplate: 26.0 A Connection: CEE 32 A Recommended Fuse: 35 A slow-blow Protection Class: IP20 Refrigeration System: Refrigerant: R404A, Filling Quantity 2.2 kg Refrigerant: R23, Filling Quantity 1.2 kg Maximum Low Pressure: 18 bar Maximum High Pressure: 25 bar Standing Pressure: 11 bar Cooling Water Data: Water Inlet Pressure: 2–6 bar Connection: R 1/2 inch Cooling Water Consumption at Full Load: approx. 0.3–0.6 m³/h Maximum Particle Size: 40 µm Dimensions and Weight: External Dimensions (W × D × H): approx. 1,820 × 900 × 1,990 mm Width Including Door Hinge: approx. 1,850 mm Depth Including Removable Door: approx. 1,155 mm Additional Depth of Removable Touch Panel: max. 170 mm Weight of Test Chamber without Options: approx. 950 kg Weight of Separate Cooling Unit: not determined Equipment: S!MCON/32 control system with external touch panel Two-chamber design with lift basket Viewing window Adjustable temperature limiter Digital and analog I/O RS232 and RS485/RS422 interfaces Potential-free contact Connection for external Pt100 sensor Separate cooling unit as shown in the pictures SIMPATI 3.0 software and extensive documentation as shown in the pictures Condition and Scope of Supply: Used Operating hour counter shows approx. 108.7 hours. Optical condition as shown in the pictures. Scope of supply includes separate cooling unit, software, documentation and accessories, exclusively as shown in the pictures. Loading and shipping via forwarding agent possible upon agreement. Subject to changes, errors and prior sale.

Condition: excellent (used), Fully hydraulic circular saw machine for workshops and production. The material is clamped using hydraulic clamping cylinders. The control system offers simple machine operation. The angle can be adjusted using a vernier scale with a resolution of 0.1 mm. The saw feed is controlled by a hydraulic cylinder, ensuring maximum cutting accuracy. If you have any further questions or require a different cutting range, please do not hesitate to call. We would be happy to show you the machine and demonstrate its capabilities. Technical data: Band saws KASTO Machine type GKS U Technical data Drive power, saw gearbox 1.6/2.5 kW Cutting speed 14/28 m/min Cutting range, round: 140 mm Cutting range, flat: 160x90 mm Saw feed, hydraulic Hydraulic Saw blade dimensions 425 mm Material support 1050 mm Machine dimensions Length/Width 1250x1205 mm Height 1900 mm Machine weight 980 kg Year of manufacture 1992 Accessories 3000 mm Rjdpfxjzqmh Te Ahcecf 1x Horizontal clamping cylinder Coolant system Protective hood Pin guide Height adjustment Pressure switch

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, TECHNICAL DETAILS Production Speed Production speed, UV spot coating: max. 3,123 ISO-B2 sheets/hour Production speed, Evo 75: max. 4,200 ISO-B2 sheets/hour Production speed, Evo 75: max. 2,291 ISO-B1 sheets/hour Production speed, hot foil embossing: max. 2,300 B2 sheets/hour Format and Printing Area Paper width: min. 290 mm Paper width: max. 750 mm Paper height: min. 360 mm Paper height: max. 1,200 mm Sheet format: min. 420 mm × 297 mm Sheet format: max. 750 mm × 1,200 mm Printable width: max. 540 mm or 730 mm Hot foil embossing area: max. 740 mm × 1,190 mm Resolution Resolution max.: 360 dpi Material Thicknesses and Basis Weights Material basis weight: min. 135 g/m² Material basis weight: max. 800 g/m² Rcsdozrfh Ispfx Ahcof Material thickness before printing and lamination: min. 150 µm Material thickness before printing and lamination: max. 800 µm Material thickness for hot foil embossing: min. 150 µm Material thickness for hot foil embossing, standard version: max. 600 µm Material thickness for hot foil embossing, optional: max. 800 µm Foil Rolls Foil roll diameter: max. approx. 300 mm Foil roll length: 400–2,000 m Number of foil rolls that can be used simultaneously: max. 5 Foil roll width: min. 100 mm Standard core diameter: 1 inch MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,720 x 1,860 x 1,840 mm Weight: approx. 4,524 kg EQUIPMENT iFOIL-L module for hot foil finishing Evo-75 version for sheet formats up to 750 mm × 1,200 mm Holder for up to five foil rolls on one shaft Quick-change core for 1-inch foil rolls

Condition: used, first registration: 08/1998, total length: 16,000 mm, total width: 2,550 mm, Year of construction: 1998, GOLDHOFER STZ-TL 3-33/80 3-axle low-bed (gooseneck) semi low-loader with 3 steering axles, with lowerable platform and hydraulic ramps TRAILER HAS BEEN SANDBLASTED AND PAINTED!! • ABS • 3 x BPW ECO-Plus air suspension axles • 3 x steering axles • lifting/lowering system • hydraulic, 2-part access ramps • hydraulically lowerable platform • extendable to 3 m width • warning signs • NATO connector for the electric/hydraulic pump • overall length: 16,000 mm • empty weight: 15,900 kg • GVW: 48,000 kg (technically possible: 48,000 kg) Rcodpfjwpknwox Ahcsf • payload: 32,100 kg • 4 x axle load gauges • twin tires: 235/75 R17.5 - TÜV / inspection and SP: !! new !! - German vehicle! Subject to errors and prior sale!

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 251 h, load capacity: 8,000 kg, lifting height: 4,490 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork length: 2,400 mm, empty load weight: 16,850 kg, total length: 2,640 mm, drive type: Elektro, construction width: 2,140 mm, Electric 4-wheel forklift Load center: 900 Mast type: Triplex Condition: As good as new Technical condition: very good Rcjdpsxxdy Nefx Ahcof Front tires type: Non Marking Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Battery Volt: 80V Battery year of construction: 2020 Sideshift, Fork positioner, 3rd valve, 4th valve, heating, STVZO, full cab, full free lift, CE certificate,

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bending end point & 1x return point possible Rcsdpfexabhajx Ahcef - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions

Condition: like new (used), Year of construction: 2025, operating hours: 400 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 GWARANCJA PRODUCENTA Rsdpsvgrpxefx Ahcscf SILNIK DEUTZ TCD 6.1 ST5 140 KW DOSTĘPNY OD ZARAZ

Condition: used, Year of construction: 1998, machine/vehicle number: 980919, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 3,450 m³/h, intake vacuum (max.): 3,550 mbar, suction capacity: 3,450 m³/h, intake manifold diameter: 250 mm, filter area: 23 m², total height: 2,959 mm, total length: 2,500 mm, total width: 1,238 mm, overall weight: 750 kg, Used clean air system for two to three woodworking machines operating simultaneously. Suitable for outdoor installation. New filters are included. The control system is equipped with a speed control function via a frequency inverter. Rodpfx Ahozukulecocf

Year of construction: 2002, operating hours: 200 h, condition: good (used), functionality: fully functional, Due to closure, everything must go at bargain prices: 1 Thomas sawing machine, used for 1 year, with table and spare parts. 1 small Italian sawing machine, 4 meters long. 1 high-end vacuum lifting device, large model, used for 6 months. 1 digital molding machine. 1 dust extraction table. 1 dust extraction cabinet. 1 dust extraction system with articulated arm. Rodpozut R Nefx Ahcecf 1 screw compressor. Come and see or request videos via WhatsApp.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,108 h, lifting height: 5,450 mm, fuel type: electric, mast type: triplex, total height: 3,210 mm, total length: 6,350 mm, total width: 2,260 mm, color: other, Year of manufacture: 2023 Empty weight: 16.539 kg Lifting capacity: 8.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Blower - Freelift - Non marking tires - Side shift - Work lamp(s) = Remarks = Rcjdpfxow U U Aho Ahcjf General Country of production: Germany Condition CE type: CE Kaup forkpositioner and side-shift, Forks 2400 mm, Battery charger, Non marking tyres

Condition: used, TECHNICAL DETAILS - Parts per minute : 450 - Cutting diameter : 4 [mm] - Die ejection : 25 [mm] - Floor space (width) : .74 [m] - Floor space (length) : 1.88 [m] Rcodpfx Ahjuhb Tqscof - Motor : 4 [hp/kW] - Net Weight : 1600 [kg] - Gross Weight : 2100 [kg] EQUIPMENT - Tooling as per photo

Condition: used, Year of construction: 2016, Technical details: weight: 22 t Redpfxozrfm Ds Ahcjcf

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The spindle was replaced on November 14, 2018. TECHNICAL DETAILS Travel in the X-axis: 880 mm Travel in the Y-axis: 630 mm Travel in the Z-axis: 630 mm Spindle speed: 12,000 rpm Controlled B-axis: -15° to +90° Tool holder: SK 40 Rjdpfx Aozpw Iujhcscf Number of tool magazine slots: 32 MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle operating hours: 50,033 h EQUIPMENT Coolant system

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Rcsdey Iwdpepfx Ahcsf Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Year of construction: 2022, condition: ready for operation (used), An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible. Rcsdpfxjvfft Ue Ahcef

Condition: ready for operation (used), Year of construction: 2011, A cold glue labeling machine by Krones is available. Concept: rotary type, label type: cut paper labels, max. label width: 180mm, labeling capacity: approx. 6000 bottles/h, machine dimensions X/Y: approx. 3000mm/3000mm, weight: approx. 3500kg. Documentation available. On-site inspection possible. Rodoxqgxlspfx Ahcecf

Year of construction: 2007, condition: ready for operation (used), A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible. Rjdpfx Ahjxxa T Sscecf

Year of construction: 2004, condition: ready for operation (used), Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. Redpfep S Srhsx Ahcecf

Condition: ready for operation (used), Year of construction: 2022, An external lift Büter Hebetechnik GmbH is available. Payload: 2000kg, lifting height: 8160mm, lifting time: approx. 45s, lowering time: approx. 45s, drive power: 6.2kW, stops: 3, ground floor height: 0mm, 1st floor height: 4450mm, 2nd floor height: 8355mm, internal dimensions X/Y: 1500mm/1260mm, largest pallet: CP2. Documentation available. An on-site inspection is possible. Rcsdpow Ext Hofx Ahcof

Condition: ready for operation (used), Year of construction: 1991, A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible. Rjdpjw Nykmefx Ahcjcf

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Rsdpfx Ahjhz Ua Secscf

Condition: ready for operation (used), Year of construction: 2001, A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible. Rcedpfx Aszdumqohcef

Condition: used, machine/vehicle number: 11924, Rotor diameter: 500 mm Rotor width: 800 mm Rcodjyr Tm Hspfx Ahcef 5-blade rotor 2 rows of stator blades Inlet cross-section approx. 800 x 450 mm Drive motor: 55 kW