Used Cnstamp Zudrückwerkzeuge Von Trumpf/Wila Typ for sale (2,967)

Condition: used, Year of construction: 2007, controller manufacturer: Bosch, controller model: PNC-P, _____ Description: Control : Bosch PNC-P Movement X/Y/Z : 2070/1280 mm Technical specifications Working area:2070 x 1280 mm (2500 x 1280 mm with extension) Punching force:165 kN Max. sheet thickness:6.4 mm X- and Y-axis speeds:80/55 m/min C-axis (rotations):180 rpm Punching cycle rate:600 cycles/min Marking cycle rate:1300 cycles/min Positioning accuracy:±0.1 mm Average positioning tolerance:±0.03 mm Tools Tool stations on the linear magazine:15 with 2 clamps MultiTool:2-, 5- or 10-position Number of tools when using MultiTool:150 Rotation of all tools:360° Tool change time (single tool):4.4 sec Tool change time (MultiTool):2.2 sec Max. punching diameter:76.2 mm Max. bending height (MultiBend):25 mm Space requirements With safety light barriers, length x width:6000 x 5825 mm Iiodjyzv Ruopfx Akxsa Height:2155 mm Weight:8000 kg Connections Total electrical power rating:14 kVA Pneumatic connection:6 bar – 8 m³/h

Condition: used, Year of construction: 2015, TRUMPF - TRULASER CELL 7040 - 2015 - working range X 4000 mm - working range Y 2000 mm - working range Z 750 mm - laser source TruFlow 4000 Watt (Co2) - FocusLine - dynamic optics for thin materials focus distance 155 mm - dynamic optics for thick materials focus distance 240 mm - HERDING Fume extraction in working arrea 2000 Nm3/h - table for laser cutting 4000x2000 mm - 3D cutting head B = 135°, C = n x 360° - CNC automatic workpiece scanning - CNC automatic height detection - optics calibration device - cooling unit - automatic sliding door "CE" - automatic two-level redundant working range protection "CE" - partition wall for 2 side operation Iisdpfey A Tqujx Akxsa - CE certification - 3D Programming Module TruTops Cell - automatic Laser status indicator light - Siemens 840D CNC control

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 700 mm, total height: 1,500 mm, total length: 800 mm, overall weight: 700 kg, TRUMPF LASERSIGN PL 2 Laser Engraving Machine - Operating voltage: 100 - 240 V - Frequency: 50/60 Hz - Rated current: 7 A - Power connection: 600 W - Internal dimensions: 400 x 300 mm - Table dimensions: 330 x 270 mm - with 6 T-slots - incl. laser source from manufacturer TBH Attention: The item must be collected bindingly between 21.04. and 30.04.2026 on a date to be agreed. FCA D-96257 Marktgraitz – loaded onto truck Iijdpfx Aksym Rx Nexsa

Condition: ready for operation (used), Year of construction: 2012, operating hours: 20,118 h, laser power: 6,000,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details. • Gesamtantriebsleistung: ca. 11,5 kW (nur Maschine ohne Zusatzausstattung) • Elektrische Ausführung: nach VDE-Richtlinien, Spannung 400 V ± 10 %, 50 Hz mit Nullleiter • Connected load: 400 V / 50 Hz / 12 kVA • Main fuse: 3x160 A • Fehlerstromschutzschalter in der Netzeinspeisung nur als allstromsensitive Ausführung mit 300 mA zulässig • Steuer- und Ventilspannung 24 V-DC • Multitasking Prozesssteuerung mit großem Bedienterminal und übersichtlicher Menüführung • Schaltschrank und Bedienpult frei aufgestellt • Lackierung Grundmaschine: lichtgrau - RAL 7035 • Lackierung Abdeckungen: rotviolett - RAL 4002 • Minimale Abschnittlänge: im automatischen Betrieb ab 10 mm • Mindest-Reststücklängen: ca. 180 mm • Verfahrweg des Nachschubgreifers: 3.000 mm • Gewicht des Schneidgutes: bis max. 4.000 kg • Länge der Maschine: 5.600 mm • Breite der Maschine: 4.300 mm • Höhe der Maschine: 2.550 mm (2.150 mm für Transport), Anlage zum Transport geteilt • Gewicht: ca. 3.100 kg • Materialauflagehöhe: 800 mm • Sägebandspannung: hydraulisch, elektrisch überwacht • Kühlmittelbehälter Fassungsvermögen: ca. 60 l • Kühlmittelpumpe Fördermenge: 40 l/min bei 2,5 m Förderhöhe, Leistung: 115 W • 3RD CNC 6006, Motor 13,1 kW, Spindeldrehzahl 50-5000 U/Min. • Tisch 6100x580 mm, ausgeführt mit Späneförderer • Verfahrwege X/Y/Z 6100x600x450 mm • Pendelbetrieb (Be- und Entladen während Maschine produziert) • Standardausführung inklusive: 15,4” Touchscreen PC und Pentium 5 PC, 8GB RAM, 120GB Festplatte • Grafische Programmierung • Automatische Werkzeuglängenvermessung • Bedienpult extern auf Linearführung • Verkleidung um Maschinenkopf • Laser-Gebietssensor (Pendelbetrieb) • Kühlanlage mit Emulsion • Ethernet-Anschluss für Teleservice • Gemäß Angebot vom 26. Januar 2022 • Inklusive: Tisch 70 mm abgesenkt und Säule 100 mm verlängert, Abstand Spindel-Tisch 295-745 mm • 16-fach Werkzeugwechsler • Elektronisches Handrad für manuelles Verfahren der Achsen • Kühlung durch die Spindel, Arbeitsdruck 4 Bar, ausgeführt mit Drehzufuhrventil geeignet für Kühlung mit nur Luft • Automatisches Tastsystem für die Höhe des Werkstücks (Z-Reader) • Komplette DrillCam CAD/CAM Software zum Konvertieren von 2D DXF, DWG, DSTV, NC, NC1 oder 3D STEP Dateien zu Maschinenprogrammen, auf der Steuerung der Maschine installiert • Safety: Light barrier system • Laser hours: 20,118 h • Condition/Service: Completely freshly serviced • Enclosed machine frame with integrated laser unit • Gantry drive combined with linear drives • Automatic pallet changer • Longitudinal conveyor belt • Cross conveyor (waste conveyor) • Work area lighting • PCS (Process Control System) • Positioning laser diode • Oil spray system • HI-LAS • HI-LAS PLUS • PMS (Plasma Monitoring System) • Trumpf Laser: CO2 laser TFL 6000 • Cooling unit • High-frequency excitation • Laser power control • Programmable cutting gas pressure setting • DIAS III • AutoLas Plus • Oil spray system for safe thick sheet metal processing • Automatic shut-off Isdpsyrfbcsfx Akxsia • Programmable power cycles • Laser logbook function

Condition: good (used), functionality: fully functional, Used WILA OZU-318 tools V100mm OZU-318 100x80° R=20 H=100 Iodpfx Akjyzh Sdexjia 1x 515mm 2x 200mm Total length L=915mm Fixed price € 1,650,- FCA Drachten, NL No response to offers or requests for lowest price.

Condition: excellent (used), functionality: fully functional, Set of used WILA OZU-317 tools V80mm OZU-317 80x80° R=16 H=100 6 x 515mm Isdeyzh Irjpfx Akxoia 1 x 200mm Total length = 3290mm Fixed price €4,000,- FCA Drachten, NL Offers and requests for the lowest price will not be answered.

Condition: good (used), functionality: fully functional, Year of construction: 1985, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bosch, controller model: CC 300, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,300 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, workpiece weight (max.): 200 kg, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 16,800 kg, total length: 5,000 mm, total width: 5,000 mm, total height: 2,600 mm, Equipment: documentation/manual, We offer this good TRUMPF Trumatic 260 Rotation CNC punch, year of construction 1985. manufacturer: TRUMPF Iiedpfx Aey Ax I Ejkxea model: Trumatic 260 Rotation year of construction: 1985 condition: good category ID: 908 type ID: 1180 type: CNC punch If you have any questions or need more information, feel free to send us a message or give us a call. TRUMPF Trumatic 260 Rotation & Quicksharp ALL TOOLING INCLUDED • Punching Force: 250 kN (approx. 25-30 tons) • Footprint: L x W x H 5000 x 5000 x 2600 mm • Working Range (X x Y): 2500x1300 mm (plus optional repositioning) • Max Sheet Thickness: 6.4 mm • Max Workpiece Weight: 150-200 kg • Tooling: 10 stations (with 360-degree rotation of all tools) • Max Tool Diameter: 76.2 mm • Max Rotation Speed (C-axis): 360°/sec • Traverse Speeds (X/Y): Up to 90 m/min (X), 60 m/min (Y) • Control: Bosch CC 300 (typical) • Machine Weight: Approx. 16,000-16,800kg • Compressed air requirement: 6 bar • Motor Power Hydraulics: 7,5 Kw • Mains Connection: 380 volts, 50 Hz, 35 kVA

Condition: good (used), Year of construction: 2008, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, working range: 2,500 mm, Equipment: cooling unit, TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530) Working area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Motion unit for high-precision processing - Additional highly dynamic Yp axis - Drives with maintenance-free three-phase servomotors - Closed beam guidance - Conveyor for small parts and waste - NitroLine - FlyLine - Piercing end detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Laser logbook function CUTTING HEAD: - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens - Universal quick-change device - ControlLine CONTROL: - SIEMENS Sinumerik 840D control system - Automatic switch-off - ContourLine - SprintLine - Teleservice Ijdpfjrwlwnex Akxsia - Microweld - RJ45 network connection - 3.5" floppy disk drive - Network connection via telediagnosis SAFETY: - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Workshop programming EXTENDED EQUIPMENT: - More powerful TruFlow 4000 laser - Automatic pallet changer

Condition: used, Year of construction: 2011, machine/vehicle number: B0702A0651, functionality: fully functional, operating hours: 30,858 h, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, pressing force: 36 t, operating speed: 220 mm/s, table length: 1,000 mm, overall weight: 2,600 kg, year of last overhaul: 2011, Equipment: CE marking, safety light barrier, The equipment has been fully maintained and is ready for immediate operation. The equipment has been in operation for 30,858 hours, and there are no operational issues (line laser not working). If you wish to use the line laser, it can be repaired for an additional fee. The cost is approximately 600 EUR. Ijdpfx Aksyytuhexsia - Press beam OK - Block laser OK - Illumination (auto) OK - Line laser Not OK I would prefer the buyer to be familiar with the TruBend7036. If purchased in South Korea, I can provide free operator training.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 950 h, machine/vehicle number: A1217J0251, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Trumpf, laser source model: fiber4000, laser hours: 98 h, laser power: 4,000 W, table length: 3,000 mm, table width: 2,000 mm, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 6 bar, overall weight: 5,500 kg, year of last overhaul: 2024, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, The equipment has a laser-on time of 98 hours and is in condition similar to new. It is currently disassembled, so operational testing is not possible. Iisdpfx Akoyyti Eoxja

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives Ijdpfxjyy Hgqs Akxeia :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: used, functionality: fully functional, 1. BALL RECIRCULATING UNIT KUVE20-B-1947 PART NO.: 386954 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: FR 2. WATER MANIFOLD COMPLETE PART NO.: 1996899 1 SET Machine: T3030 L20 3. WELDING HEAD WS OPTICS 1 SET Machine: T3030 L20 4. CUTTING HEAD LENS 250 D40 – 17616 PART NO.: 1497234 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: DE 5. (R)GRID VOLTAGE UNIT PART NO.: 0983675 1 PC. Machine: T3030 L20 6. BELLOWS Y-AXIS 93614-102-40 PART NO.: 0141394 1 PC. Machine: T3030 L20 7. EXPANSION VALVE TGEN 25TR MOP70 R134a PART NO.: 1627195 1 PC. Machine: 3030 6kW 8. BELLOWS X-AXIS 1854032 PART NO.: 606083 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: IT 9. TRIODE UP TO 4KW RS3021CJ PART NO.: 903994 1 PC. Machine: T3030 BRAND: THALES 10. FILTERS 8 PCS. Machine: T3030 11. BELLOWS Y-AXIS PART NO.: 1226193 1 PC. Machine: T3030 5kW 12. DISK BELLOWS Y-AXIS PART NO.: 1353514 1 PC. Machine: T3030 5kW 13. BOX BELLOWS PART NO.: 0978079 1 PC. Machine: T3030 5kW Iiodpfxsx Uzblo Akxoa

Condition: used, Year of construction: 2022, operating hours: 26,536 h, machine/vehicle number: A3231E0445, laser type: fiber laser, laser power: 24,000 W, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2022) High-spec 2D fiber laser cutting machine. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. Key data Machine No.: A3231E0445 Year: 2022 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness: Steel 50 mm / Stainless 50 mm / Aluminium 40 mm Max. speed: 140 m/min Iiedpey Aaxxefx Akxoa Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Process cooler (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance (LLK). Machine status light. Integrated electrical cabinets. Rated to 45 °C ambient. Cutting unit Single cutting-head strategy. Protective glass with online monitoring. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Functions & packages AdjustLine, BrightLine Fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine. Fusion cut, Highspeed, Highspeed Eco, copper, brass, thick sheet and gas mix (N2/O2) cutting packages. Compressed-air cutting. CoolLine. Nanojoints. Smart Collision Prevention. Dot Matrix Code. EdgeLine Bevel. Smart Nozzle Automation. Microweld. Quick post-production. Auto-shutdown. Programmable gas/pressure selection. Safety & extraction CE compliant. Light barriers. Enclosed housing with viewing panels. Electrical rolling roof. Multi-chamber compact dust extractor. Automation & pallet changer Automatic heavy-duty pallet changer (longitudinal). LiftMaster Compact 1530 (AL34) with hydraulic loading table, additional suction cups and sheet peeler. Connectivity USB, RJ45, Central Link, Online Update Manager, RCI, remote support, MobileControl app, Wireless Operation Point. Dual integrated cameras. Production plan, multi-sheet processing, Condition Guide, Cutting Guide. Additional equipment Witt gas mixer unit. Gas prefilters. Cleaning brush. Mild steel slats (33.5 mm spacing). Wide transverse conveyor belt with tipping container (right). Mezzanine installation (steel structure not included). Availability Condition: Used. Available: August 2026. Viewing/cut test by appointment. EXW — buyer arranges transport. Decommissioned by authorised TRUMPF engineers and loaded onto buyer's transport. Export packing available. Enquiries Contact for full spec pack, hours, service history, spares list and video/cut samples.

Condition: used, Year of construction: 1998, pressure 25 t working area 2535 x 1280 mm plate thickness 0-8 mm Iijdpfjyy A Ecsx Akxea punch diameter max. 76 mm tool change unit 19 no. of strokes 600 Hub/min Max. Positioning speed 108 m/min dimensions of the machine ca. 7,5 x 7,8 x 2,4 m total connected load 35 KVA

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Iisdpjyyygkjfx Akxoa Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Power: 3,200 W

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Beam on: 17,540 h Iijdoyyyilepfx Akxsa Laser on: 45,508 h

Condition: excellent (used), Year of construction: 2007, Operating hours: 100,050 h Press force: 850 kN Stroke: 445 mm Operating pressure: 300 bar Overrun time: 95 ms Overrun distance at 220 mm/s: 10 mm Overrun distance at 160 mm/s: 8.5 mm Isdpfx Ajyyyfaokxsia Safety distance: 190 mm

Condition: excellent (used), Year of construction: 2002, Operating hours: 49,336 h Iiodpfx Aksyyyc Sexsa Press force: 1,300 kN Stroke: 365 mm Operating pressure: 340 bar Overrun time: 58 ms Safety distance: 93 mm

Condition: excellent (used), Year of construction: 2002, Operating hours: 38,516 h Press force: 500 kN Iijdpoyyybbsfx Akxoa Stroke: 215 mm Operating pressure: 290 bar Overrun time: 48 ms Safety distance: 77 mm

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm Iodsxaa Urepfx Akxoia with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: good (used), functionality: fully functional, Year of construction: 2009, Working area: 3000 x 1500 mm Laser power: 5000 W Sheet thickness for mild steel: 25 mm Sheet thickness for stainless steel: 20 mm Sheet thickness for aluminium: 12 mm Iodpfx Aksyyn Rqsxsia Machine weight approx.: 12,000 kg Operating hours: NC ON hours: 38,900 h Laser ON hours: 39,498 h Beam ON hours: 18,649 h (Status as of: 22/01/2026)

Year of construction: 1993, condition: ready for operation (used), A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible. Ijdoyz Ap Ropfx Akxsia

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens Iodpfev Sm Ruex Akxoia • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Multiset, 60 cassettes + over 100 tools for a TC500-1300 / year 1996 available Iijdsyybdqspfx Akxsa

Condition: excellent (used), Trumpf TC500-1300 including Sheetmaster, powered on Iiedpfsyybc Hjx Akxja