Used Brandt Optimat Kdf 220 C for sale (57,453)

Condition: used, Year of construction: 2006, Technical data: - Manufacturer: Bütfering - Type: Optimat SCO 113/C/DIA - Year of construction: 2010 - Sanding belt width: 1370 mm - Sanding belt length: 2150 mm - Suction volume: approx. 3,530 m3/h - Suction nozzle: 1 x Ø 180 mm (sanding unit) 1 x Ø 140 mm (finishing brush) 1 x Ø 100 mm (suction fan) - Combined sanding unit with switchable sanding sanding drum and sanding pad. Dcedpfx Aisv Ecy Selen Dqlu3Z - Automatically adjustable, profiled steel steel contact roller with grain equalisation for calibration an electronically controlled pressure beam with lacquer sanding package. - Infinitely variable frequency-controlled sanding belt speed sanding belt speed 2 - 18 m/s. - Vacuum clamping device, fan integrated in the machine stand - Drive motor: 15 kw - Total connected load: approx. 19 kw - Operating voltage: 400 V / 50 HZ. - 1 pc. of UNI-BLOWER on outfeet side - 2 pc. of LIROS/SEOT 09 anti static units on outfeed side ( top/bottum )

Condition: used, Year of construction: 2010, Edge banding machine Manufacturer: Brandt Type: Optimat KTD 720 Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Dcedpfx Aiezuzlbelen

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Dcedpjx Exmtjfx Ailsn Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2006, - Infeed fence: manually adjustable - Jointing milling unit with 2 motors, each 2.2 kW: both motors pneumatically controlled - Hot-melt adhesive application - Pressure zone: with 1 main pressure roller and 3 follow-up pressure rollers - End trimming unit with 2 motors, each 0.35 kW: automatically adjustable via program from chamfer cuts to straight cuts - Edge milling unit with 2 motors, each 0.55 kW: for flush milling, bevel milling, or radius milling with 4-point fixed position adjustment for side tracing - Groove milling unit: with horizontal spindle - Copy milling unit with 2 motors, each 0.35 kW: with pneumatic infeed and outfeed control Dcjdsy Av A Hopfx Ailsn - Profile scraper unit: with pneumatic infeed and outfeed control - Flat scraper unit - Buffing unit

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be Dedpsq Ehpaofx Ailscn easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h Dsdpfeyu If Nox Ailecn EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Year of construction: 2009, condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W -Dimensions: 385/365/H695 mm -Weight: 24.4 kg Dcsdpfxox Sw N He Ailsn

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Djdpfovvkfwjx Ailscn Storage location: Nattheim

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Numerical Control MAESTRO PRO EDGE /Software EYE-M Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Dcsdpfxezmfg Tj Ailen Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE

Condition: used, BINDER Vacuum Drying Oven with Pump Module BINDER VD 56 + VD-M 53 Vacuum drying oven up to 220 °C with pump unit and BINDER VAP 1 vacuum pump. For sale is a used BINDER VD 56 vacuum drying oven from the year 2023, including a matching BINDER VD-M 53 pump module and BINDER VAP 1 vacuum pump. The system is suitable for the gentle drying of temperature-sensitive materials under vacuum conditions, as well as for applications in laboratories, research, development, quality control, and industrial process technology. Technical data: Manufacturer: BINDER GmbH Model: VD 56 Device type: Vacuum drying oven Year of manufacture: 2023 Article number: 9630-0002 Version: VD056-230V Made in Germany Temperature range: +9 °C above ambient temperature to +220 °C Internal volume: 55 liters Heating time to 100 °C: approx. 80 min Spatial temperature deviation at 100 °C: ± 1.2 K Temporal temperature deviation at 100 °C: ± 0.1 K Vacuum data VD 56: Leak rate: 0.01 bar/h Vacuum connection: small flange DN 16 Measuring port: small flange DN 16 Electrical data VD 56: Rated voltage: 200–230 V Mains frequency: 50 / 60 Hz Rated power: 1.4 kW Rated current according to nameplate: 6.1 A Phase: 1N~ Protection class: IP20 Dimensions VD 56 without attachments and connections: approx. 638 × 461 × 815 mm (W × D × H) Internal dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net device weight: approx. 96 kg Load capacity: Maximum load per insert: 20 kg Maximum total load: 60 kg Number of inserts standard / maximum: 1 / 5 Pump module: Manufacturer: BINDER GmbH Type: VD-M 53 Device type: Pump module for vacuum drying oven Article number: 8012-1943 Year of manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current consumption: 8.0 A Phase: 1N~ Protection class: IP20 Made in Germany Vacuum pump: Manufacturer: BINDER GmbH Type: VAP 1 Device type: Vacuum pump Article number: 5013-0217 Year of manufacture: 05/2023 Pumping speed: 2.0 / 2.2 m³/h Ultimate pressure: < 7 mbar Voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 1.6 / 1.5 A Protection class: IP40 Dcodpfxoz Ikx Uo Ailsn Made in Germany Equipment: BINDER VD 56 vacuum drying oven BINDER VD-M 53 pump module / pump unit BINDER VAP 1 vacuum pump Digital controller with display of pressure and temperature Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measuring port DN 16 Safety glass pane with splinter protection Large viewing window Tray insert Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions according to the images Accessories according to the images Applications: Vacuum drying Gentle material drying Laboratory and experimental technology Research and development Quality control Material testing Industrial process technology Temperature and vacuum applications Scope of delivery: 1 × BINDER VD 56 vacuum drying oven 1 × BINDER VD-M 53 pump module / pump unit 1 × BINDER VAP 1 vacuum pump Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions Accessories according to the images Scope of delivery as shown Overall dimensions including pump module: approx. 638 × 645 × 1,542 mm (W × D × H) Total weight including pump module and vacuum pump: approx. 130 kg Condition: Used Year of manufacture 2023 Optical condition according to the images Nameplates are present Scope of d

Condition: used, Year of construction: 2008, - with workpiece return - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Feed rate max: 20 m/min - with groove milling unit One: Edge banding machine with return Manufacturer: Brandt Type: KDF 991 Year of manufacture: 2008 Workpiece return Manufacturer: Ligmatech Type: ZHR 05 Boomerang Year of manufacture: 2007 Technical data - Right-hand machine - Machine length: 8,260 mm - Ligmatech ZHR 05 length: 10,460 mm - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Thickness of wound edge max: 3 mm - Workpiece width min: 60 mm Dedpfx Ajzuyp Ssilscn - Feed rate max: 20 m/min - Stepless feed: material pressure zone adjustable via servomotor - Electromotive height adjustment - Infeed stop: adjustable via servomotor - Infeed stop for thin elements - Glue system for granules: glue pot above the feed chain - BRANDT glue system QUICKMELT QA 45 - Suitable for PUR adhesives - Magazine for single strips - Spray device, front, cleaning at the rear - Pre-milling unit - Preheating zone - End trimmers: 2 motors, pneumatically adjustable - Flush trimming: top + bottom, manually adjustable - Fine milling trimming unit: 2 motors, adjustable via servomotor R2 - Edge rounding unit: 4 motors, manually adjustable - Groove milling unit: manually adjustable with tilting function - Radius trimming blades: R2, pneumatically adjustable / Second set for R1 included - Flat trimming unit - Glue joint trimming blade - Cleaning fluid spray at the rear - Buffing unit - Solid wood edge sanding unit - Conformity marking: Including complete documentation and CE

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-261-20-5976, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 20 m/min, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Solid wood edge thickness: 12 mm Feed speed: 20 m/min MACHINE DETAILS Control: POWER CONTROL PC 20+ Operational current (full load): max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Dodpfxsyzm E No Ailscn Fuse: 35 A Frequency: 50 Hz EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Jointing unit Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear contour rounding unit with two motors Edge scraper unit Glue scraper unit Buffing unit External reference: MMG014

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system Djdpfezux T Asx Ailocn - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008477, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Dcodpfsy Hq Nvjx Ailen Operating Units: 7 nr

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, overall weight: 1,500 kg, controller model: Easy Control EC 10+, The machine has been completely overhauled! TECHNICAL DETAILS Edge material, strip: 0.4–6 mm Edge material, roll: 3 mm Workpiece thickness: 8–60 mm Workpiece width at workpiece thickness 8–22 mm: min. 70 mm Feed rate: 11 m/min Tool set Radius: 2 mm Dsdpfx Ajz Iru Djilocn Joint milling unit Motor power: 2 × 2.2 kW Frequency: 200 Hz Cutting unit Motor power: 2 × 0.18 kW Milling unit Motor power: 2 × 0.27 kW Profile milling unit Motor power: 1 × 0.35 kW Design: WD 60 Working height: 950 mm MACHINE DETAILS Connected power: 9.8 kW Dust extraction connection: 1 × 120 mm / 3 × 80 mm / 1 × 100 mm Power supply: 400 V / 3 phase / 50 Hz Pneumatic pressure: 6 bar Dimensions & Weight Dimensions (L x W x H): 4,773 x 1,525 × 2,182 mm Weight: 1,500 kg EQUIPMENT Electronic control system Easy Control EC 10+ Automatic edge feeding Tool set R = 2 mm Joint milling unit Gluing unit A6 Pneumatic 2-point adjustment of the pressure zone Cutting unit for chamfer and straight processing Pneumatic adjustment of the cutting unit for chamfer and straight processing Milling unit, counter-rotating Pneumatic adjustment of the milling unit for chamfer, radius, and straight processing Profile milling unit WD 60 Scraper blade with quick-change heads Pneumatic adjustment of the scraper blade Glue joint scraper blade Smoothing unit with 2 motors Control texts in German and English Operating manuals for commissioning, operation, and maintenance in English on DIN-A4 paper and CD-ROM Operating manuals for commissioning, operation, and maintenance in German on a USB stick Spare parts labels in German and English New tools included

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Belt width: 1370 mm Belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed rate: 2.5 - 13 m/min (infinitely adjustable) Belt blowing system Dust brush Drives: Grinding unit: 15 kW Total connected load: 17 kW Dcedpfx Aezwm Hceiljn Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Location: Nattheim

Condition: good (used), Year of construction: 2014, Description: see machine photos. Dedpfjy Tm Nfex Ailjcn

Condition: used, machine/vehicle number: 008552, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Dcedpfezg D D Dsx Ailen Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008554, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Dcedpszg D Ezsfx Ailen Operating Units: 8 nr

Condition: excellent (used), Year of construction: 2010, Engel Victory 1050/220 Tech with Wittmann W721 robot Year of manufacture: 2010 Injection unit: Screw diameter: 55 mm Shot weight: approx. 480 g Injection pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Dsdez Iprmepfx Ailecn Tie bar spacing: 0x0 mm Platen size: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 3 Control system with hot runner system x 30 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 12200 kg Length/Width/Height: 5.66x1.88x2.10 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, EFCO Glass Tempering System 750 °C Thermal glass tempering system for the production of single-pane safety glass / tempered glass For sale is a professional, industrial glass tempering system from the renowned British manufacturer EFCO Furnaces Ltd. The system is ideally suited for the thermal tempering of flat glass for the production of single-pane safety glass (tempered glass). System Components & Structure Oven inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the enclosed heating chamber (oven). Cooling system / fans: Powerful radial fans (blowers). These are essential for the thermal tempering process, in which the heated glass is rapidly cooled with air (“quenched”) to create the necessary surface tension. Outlet & quenching area: A precise roller conveyor with ceramic or special rollers, on which the glass is held flat and transported during the cooling process. Control & electronics: A central main control cabinet with PC visualization for monitoring the temperature zones, as well as separate operator terminals with analog pressure and temperature displays (e.g., for the air pressure of the fans). Technical data: Manufacturer: EFCO Furnaces Ltd. Type: Glass Temperer (Glass Tempering System) Maximum temperature: 750 °C Rated power: 220 kW Heating zones: 10 separately controllable zones (for precise temperature profiles) Connection voltage: 380 volts Number of phases: 3 phases Mains frequency: 50 Hz Reference number: 427206 Year of manufacture: 2001 Conformity marking: CE certified Dimensions (L x W x H): 16.80 m x 2.80 m (width up to fan connection) x 2.25 m Complete set of spare ceramic rollers: A full, unused/new set of high-quality transport rollers (Fused Silica Rollers) with a new value of over €10,000 for the oven area. Item location: 32278 Kirchlengern Dismantling until the end of October Dismantling & transport: Option 1: The dismantling, loading, and transport will be completely organized and carried out by the buyer (collection from the location). Option 2: Dismantling service by us: Alternatively, we offer to have our team professionally dismantle the complete system. Surcharge: €5,000 net "All from one source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request! Dcsdpfxoz Hm Ipj Ailon

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 15 Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 18 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) A12 Dodpfxjzyaiie Ailscn Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit (2 x Kw 0,35) pneu Rough Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (2 x Kw 0,4) Profile edge scraping unit (fast-release) Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit (2 x Kw 0,18)

Condition: used, Year of construction: 2017, Roll production line, dough band system, Lippelt Rustica Round 220 - Softrounder Year of manufacture: 2017 Condition: used, fully functional Approx. 5530 operating hours Rustica with Softrounder – the all-rounder for processing square and round-shaped wheat rolls With punching station and cutting guillotine – for individual and unique rolls Processes all types of dough, cuts all sizes, stamps patterns into your rolls, or cuts out triangles Ideal for producing rose rolls with fat application 1 to 6-row operation Discharge device for baking trays with a maximum size of 670 x 1000 mm With transverse belt, retractable for the discharge device for further processing Transverse belt with pressure roller and shaping board With seed station (water bath and seed rotating disc), type: Rumo 6 for double-sided seeding Touchscreen control with recipe memory Dcjdjz A Ry Uspfx Ailjn Dough band width 220 mm Includes 2 punching dies (Veronese 5-row and double oblique cut) Includes shaping cups for 40-80g (5-row) and 80-120g (3-row)

Condition: used, machine/vehicle number: 006458, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Dodpfx Aienzrt Asljcn Max feed speed: 11 m/min Maximum panel thickness: 50 mm

Condition: used, machine/vehicle number: 007985, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Dcjdjx A Th Dspfx Ailen Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr