Used Brandt Optimat Ftk 130 for sale (4,721)

Condition: good (used), Year of construction: 2007, functionality: fully functional, For sale: an edge banding machine of the brand Brandt KDF 660. Crsdoyhqa Njpfx Ailoh

Condition: used, Year of construction: 2008, POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid wood edge thickness (mm) 12 Feed speed 20 m/min Manual infeed guide Pre-trimming unit EVA glue application and pre-melting unit Edge holder plate End trimming unit Two-motor overlapping trimming unit Two-motor staggered chamfering unit with NC adjustments Two-motor rounding unit Edge scraper unit Glue scraper unit Brush unit Cjdpew Db Rfofx Ailerh

Year of construction: 2018, condition: used, Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible. Cjdpfxoz Hn Spo Ailorh

Condition: used, Year of construction: 2004, - Pre-milling unit Cjdpfxszux T As Ailorh - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, Engine power: 10 HP Splitting force: 20 tons KH1100F diesel engine Starting: pull starter and key Max. operating pressure: 22 MPa 4" cylinder Maximum log diameter: 480 mm Maximum log length: 610 mm Cycle time: 5 s Return time: 3 s 4-arm splitting wedge OREGON 20" guide bar Chain: 74 links, 0.375 Saw/splitter drive: hydraulic motor/gear pump Ejector length: 3175 mm Conveyor belt (outfeed belt): 6800 x 250 x 4 mm Engine oil: 1.5 L (10W30/10W40) Hydraulic oil: 32 L (HL46) Hydraulic pump efficiency 81% Shipping dimensions (L x W x H) 2200 x 1000 x 1200 mm Machine dimensions (L x W x H) 6400 x 1400 x 2200 mm Weight 1151 kg Features Crawler drive – self-propelled design allows for operation in difficult terrain. Combustion engine – complete independence from electrical power. Splitting force of 20 tons – effective splitting of even hard wood. Hydraulic feed and pressure – faster and more convenient operation. Hydraulic cutting and splitting – high efficiency of the entire process. Maximum wood diameter of 500 mm – allows for processing large logs. Credpfxezx Apio Ailoh Sturdy construction – suitable for intensive use. Mobility – easy access to the job site without the need to transport wood.

Condition: used, Year of construction: 2023, machine/vehicle number: 15718, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Codpfx Aoz Aa Haeilerh Technical data: - Year of construction: 2023 - Serial number: 15718 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 1989, Used Machine Features and Technical Specifications: Credpfxjzk N Ehj Ailjh - Small machine for processing molded parts - Processes hot-melt adhesive-coated edging material, which is reactivated using hot air - The workpiece is automatically fed by pressing it against the central, driven pressure roller, ensuring uniform adhesive reactivation and, consequently, reliable bonding - Thermostatic temperature control via a dial thermostat - Maintenance-free three-phase hot-air blower for continuous operation - Automatic airflow deflection - Pneumatically operated roller cutting device trims even the toughest veneer and PVC edges - Foot switch for processing molded parts - Workpiece thickness: 10–50 mm - Heating power: 3 kW - Connected load: 3.3 kW - Workpiece width (min.): approx. 25 mm - Edge thickness approx. 0.5–1 mm - Minimum inner radius approx. 25 mm - Feed rate 4 m/min. - Pneumatic pressure: 6 bar Weight: approx. 105 kg Availability: available shortly Location: Röllbach

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,3/ 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 8 Cedpfx Aijzyahxoljrh Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 14 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) QA65 N Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) (2 x Kw 0,22) Fine Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (1 x Kw 0,35) Profile edge scraping unit MZ40 Glue scraping unit Buffing unit (2 x Kw 0,09)

Condition: excellent (used), CATALOG NUMBER 7753 TECHNICAL SPECIFICATIONS - Maximum diameter of workpieces: 130 mm - Fitted sleeve: 110 mm - Maximum diameter of input material: 160 mm - Minimum length of input material: 800 mm - Maximum allowance for machining per side: 15 mm - Cutter head drive motor: 15 kW - 3 feed speeds + forward/reverse - Feed motor: 1.1 kW In sequence: - 3 geared pull rollers - 3-knife cutter head - 3 smooth pull rollers - Dimensions (length/width/height): 3100x1400x1500 mm - Weight: 2100 kg ADVANTAGES Codpfxozulqne Ailsrh – Polish production – 3-knife cutter head – Used lathe, very good condition Net price: 32,900 PLN Net price: 7,651 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Codpfx Asx Swf Ujilerh Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Condition: used, Year of construction: 2023, Machine No. 26, Serial No. 7271-0616, NC5+ control system, maximum clamping force 1,300 kN, conveyor system, manufacturer Colortronic, handling system, manufacturer Wittmann, type Primus 14-0704, year of manufacture 2023, safety enclosure, conveyor belt, L/W approx. 1,800 x 800 mm, skylight. Crodpfx Asz H Rc Djileh

Condition: good (used), Year of construction: 2006, - Infeed fence: manually adjustable - Jointing milling unit with 2 motors, each 2.2 kW: both motors pneumatically controlled - Hot-melt adhesive application Crsdpfxoy Av A He Ailjh - Pressure zone: with 1 main pressure roller and 3 follow-up pressure rollers - End trimming unit with 2 motors, each 0.35 kW: automatically adjustable via program from chamfer cuts to straight cuts - Edge milling unit with 2 motors, each 0.55 kW: for flush milling, bevel milling, or radius milling with 4-point fixed position adjustment for side tracing - Groove milling unit: with horizontal spindle - Copy milling unit with 2 motors, each 0.35 kW: with pneumatic infeed and outfeed control - Profile scraper unit: with pneumatic infeed and outfeed control - Flat scraper unit - Buffing unit

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales. Csdjz Ebznepfx Ailorh

Condition: used, Year of construction: 2008, - with workpiece return - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Feed rate max: 20 m/min - with groove milling unit One: Edge banding machine with return Manufacturer: Brandt Type: KDF 991 Year of manufacture: 2008 Workpiece return Manufacturer: Ligmatech Type: ZHR 05 Boomerang Year of manufacture: 2007 Technical data - Right-hand machine - Machine length: 8,260 mm - Ligmatech ZHR 05 length: 10,460 mm - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Thickness of wound edge max: 3 mm - Workpiece width min: 60 mm - Feed rate max: 20 m/min - Stepless feed: material pressure zone adjustable via servomotor - Electromotive height adjustment - Infeed stop: adjustable via servomotor - Infeed stop for thin elements - Glue system for granules: glue pot above the feed chain - BRANDT glue system QUICKMELT QA 45 - Suitable for PUR adhesives - Magazine for single strips - Spray device, front, cleaning at the rear - Pre-milling unit - Preheating zone - End trimmers: 2 motors, pneumatically adjustable - Flush trimming: top + bottom, manually adjustable - Fine milling trimming unit: 2 motors, adjustable via servomotor R2 - Edge rounding unit: 4 motors, manually adjustable - Groove milling unit: manually adjustable with tilting function - Radius trimming blades: R2, pneumatically adjustable / Second set for R1 included Crsdpfx Aszuyp Soiloh - Flat trimming unit - Glue joint trimming blade - Cleaning fluid spray at the rear - Buffing unit - Solid wood edge sanding unit - Conformity marking: Including complete documentation and CE

Condition: ready for operation (used), functionality: fully functional, Meat grinder LASKA W 130 . Crjdpfxoz E Daao Ailoh

Condition: new, Year of construction: 2026, Engine power: 14 HP Splitting force: 20 tons LONCIN engine Starting: Puller and key Operating pressure: 18 - 20 MPa Cylinder: Ø101.6 x 610 mm Maximum log diameter: 500 mm Maximum log length: 610 mm Cycle time: 6 - 8 s Return time: 3 s Cjdpfx Ajzx Amzeilsrh 6-arm splitting wedge 22" STHIL guide bar 74-link chain, 0.75 mm Saw/splitter drive: hydraulic motor/gear pump Ejector length: 3.2 m Conveyor belt (outfeed belt): 6800 x 250 x 4 mm 13" tires Engine oil: 0.8 L (10W30/10W40) Hydraulic oil 30 - 35 L (HL46) Hydraulic pump efficiency 81% Shipping dimensions (W x L x H) 2150 x 1000 x 1200 mm Machine dimensions 6400 x 1200 x 2200 mm Gross weight 650 kg Features: Splitting force of 20 tons – effective splitting of larger and harder logs. Combustion engine – independence from the electrical grid, suitable for field use. Hydraulic feed and pressure – stable material guidance and safe operation. Hydraulic cutting and splitting – one machine for two key stages of wood processing. Sturdy construction – durable and stable frame for intensive use. Ergonomy and comfort of use – convenient settings and intuitive operation facilitate everyday use. Universal use – suitable for farms, forestry work and professional woodworking.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, spindle speed (max.): 1,660 rpm, spindle speed (min.): 45 rpm, total height: 1,700 mm, total width: 1,550 mm, total length: 1,760 mm, table width: 300 mm, table length: 1,270 mm, type of input current: three-phase, overall weight: 1,450 kg, input voltage: 400 V, workpiece weight (max.): 1,450 kg, distance table to spindle center: 646 mm, Equipment: documentation/manual, Heavy-duty universal drilling and milling machine with digital position measurement, DPA 31 Plus. Crsdpfx Aozy D Ezoilsh

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel Crsdpoyu If Nefx Ailoh

Condition: used, Year of construction: 2008, We offer this used BIESSE SKIPPER 130 throughfeed machining center, year of construction 2008. Manufacturer: BIESSE Credpfx Aioz H Sf Tolsh Model: SKIPPER 130 Year of construction: 2008 Condition: used Category ID: 2074 Type ID: 151 Type: throughfeed machining center If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 15 Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 18 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) A12 Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit (2 x Kw 0,35) pneu Rough Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (2 x Kw 0,4) Profile edge scraping unit (fast-release) Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit (2 x Kw 0,18) Crsdpfx Ajzyaiijiloh

Condition: used, Year of construction: 2011, We are offering this used Wegoma DS 130 BC miter saw, manufactured in 2011, for sale. Type: DS 130 BC Credpfx Aoz Ag Ecoilsh Serial number: 09438 Year of manufacture: 09/2011 If you have any questions or require further information, please feel free to send us a message.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-261-20-5976, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 20 m/min, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Solid wood edge thickness: 12 mm Feed speed: 20 m/min MACHINE DETAILS Control: POWER CONTROL PC 20+ Operational current (full load): max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Fuse: 35 A Frequency: 50 Hz EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Jointing unit Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear contour rounding unit with two motors Edge scraper unit Glue scraper unit Buffing unit External reference: MMG014 Credpfjyzm E Nex Aileh

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, power: 25 kW (33.99 HP), workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, Equipment: CE marking, TECHNICAL DETAILS Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 12 mm Maximum feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge preheater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Corner rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Crjdpfx Aieytr Rgsleh Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spraying unit Control with more than 20 control systems CE marking The machine is sold and delivered in its actual and legal condition ('as seen and agreed'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Condition: excellent (used), functionality: fully functional, 4 spindles: bottom/right/left/top Chromed tables Working width: 130 mm Working height: 100 mm Feed speed regulated by inverter up to 36 m/min Spindle diameter: φ40 mm Total power: 16.8 kW Crjdpfszz Nq Ssx Ailsh Year of manufacture: 2021 Weight: 2550 kg

Condition: excellent (used), Catalog number 7979 TECHNICAL DATA - Max. diameter of workpieces 130mm - Fitted sleeve 57mm - Min. length of input material 800mm - Tool head drive motor 18.5kW - 4 types of feed speeds + forward/reverse - Feed motor 2.2kW In sequence: - 6 toothed draw-in rollers - 3-knife tool head - 6 smooth draw-out rollers - Diameter of exhaust outlet 140mm - Additional sleeves included: 40, 45, 50, 75mm - Dimensions (L/W/H) 3100x1300x1400mm - Weight 2100kg ADVANTAGES - Made in Poland - 3-knife tool head - Additional sleeves included: 40, 45, 50, 75mm Cjdpezwwwlefx Ailsrh - Used lathe, very good condition Net price: 31900 PLN Net price: 7419 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)