Used Berg & Schmid Cnc Circular Saw for sale (14,984)

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. Ljdpfx Anefg E Hpeceaa • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Working height from to 80 - 220 mm table surface area 120 x 60 mm weight of the machine ca. 22 Kg Lasdpfx Anjfv Av Iscsa dimensions 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t Lajdpsd Iin Hofx Ancja dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 315 mm capacity 90 degrees: round 108 mm capacity 90 degrees: square 93 mm 150 x 90 mm Working height 920 mm saw blade turning speeds 17+33 oder 33+66 U/min total power requirement 1,5/1,8 kW Lasdpfxjd Iin Sj Ancja weight of the machine ca. 0,328 t dimensions of the machine ca. 0,8x0,9x1,7 m ACTION PRICE!!! High-performance vertical circular saw VKS 315 (Article 20150) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension • Robust prism guide of the saw head (dovetail guide adjustable) • Automatic cooling • Machine base with chip drawer • Metal handle for high clamping force ATTENTION: Price is without saw blade!!! (saw blade price EUR 109)

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Lsdpfed Iip Aox Ancsaa total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material Laodpfjd Iiptjx Ancoa 6. Open the vise

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm Laedpfx Anjd Iip Rocea 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 35 + 70 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Lsdod Iip Uspfx Ancjaa Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR

Condition: good (used), Year of construction: 2011, From a company liquidation: Berg und Schmid VKS 370 HA Year of manufacture 2011 Semi-automatic machine 4-meter roller conveyor left + right Left stop with digital length measuring system, adjustable via handwheel Cutting capacity with a 370mm saw blade: Round 120mm - Square 100mm - Rectangle 180x100mm at 90° at 60°: Round 110mm - Square 90mm - Rectangle 90x100mm Miter cuts left up to 60° - right up to 45° Saw blade mount 40mm Saw blade speed 15-70 rpm 380 volts Coolant pump Semi-automatic function: 1. Clamp the material 2. Saw starts 3. Lower at rapid traverse to the beginning of the material or cut immediately for serial cutting 4. Remove the saw blade 5. Raise the frame until just above the material Ledpfx Answa Ecqoceaa 6. Open the clamping jaw

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm Lasdpfsx Ek A Tsx Ancoa square: 100 mm rectangular: 180 x 100 mm at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg

Condition: new, Berg & Schmid Bandsaw Machine GBS 218 Eco AutoCut For mitre cuts to the left up to 60° Clamping vise with quick-release mechanism Carbide saw band guides for highly precise cuts Integrated blade tension control, electric coolant system, machine base Ledoyw Ta Sjpfx Ancsaa 3-stage AutoCut system with manual function, Motor: 400 V / 1.2 kW Weight approx. 240 kg, cutting speed 30 + 70 m/min Includes 1 special saw band 2455 x 27 x 0.90 mm Cutting capacities: 90° round / square / rectangular: 220 / 210 / 230 x 185 mm 45° left round / square / rectangular: 150 / 150 / 150 x 210 mm 60° left round / square / rectangular: 90 / 90 / 90 x 100 mm

Condition: used, 1 used band saw automatic machine Manufacturer: Berg & Schmid Model: X Tech 410 Technical specifications: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control Lajdpoytvqqsfx Ancsa - Band run monitoring with automatic feed adjustment - Automatic cut-in for the first cut, minimum remnant length 15 mm - Infinitely variable, frequency-controlled saw drive - Clamping pressure regulation for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided saw band lift-off device - Hydraulic saw band tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Paint finish: platinum grey RAL 7036 and turquoise RAL 5018

Year of construction: 2019, condition: ready for operation (used), Additional Equipment Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. Leveling element (1 set = 4 pieces) with stud bolt M 12x100. Feed side – left. Feed roller conveyor URB 290, Length 3000 mm. Feed adapter for URB 290/400. Outfeed roller conveyor URB 290, Length 2000 mm. Removal adapter for URB 290/400. Connecting piece for machine, attachment on the right. LM 55 M/man. Length stop, Measuring length 2000 mm. Lsdjx Nr Sqopfx Ancsaa This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Application Types Sawing

Condition: good (used), Year of construction: 2021, Mitre cuts up to 60° left and 45° right Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Infinitely variable band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 420 kg Ball-bearing rotary table Quick-release vice Large material support Coolant system Including: Infeed roller conveyor 2x2000 mm Ljdpfoyuyb Nox Ancoaa Measuring unit 4000 mm on the discharge side with digital display

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg Ledpfxjquzd Rj Ancsaa good condition

Condition: used, Year of construction: 1999, machine/vehicle number: 012563001, rotational speed (max.): 3,600 rpm, input voltage: 400 V, For cutting aluminum profiles with miter cuts Laedowl Uzyopfx Ancja Year of manufacture: 1999 Advance payment Transport costs not included

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device Laedpfxeyrhu So Ancoa • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. Lasdefgyh Uspfx Ancsa • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Format: 0x0 Equipment: Laedpfx Ansx Rh D Secoa Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Vertical circular saw (fully automatic) by Berg & Schmid VKS 370 VA. Ledeynnzwepfx Ancoaa The machine was in series production until recently and is in good condition. Numerous accessories are included (e.g. saw blades).

Condition: new, capacity 90 degrees: round 130 mm capacity 90 degrees: square 130 mm Lodpfofv Aq Uox Anceaa 130 x 125 dimensions of saw-band 1440 x 13 x 0,65 mm dimensions 350 x 690 x 520 m band speed 30 - 80 m/min total power requirement 1,2 kW weight of the machine ca. 19 kg Action Price!! Berg & Schmid - assembly band saw PBS 130 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60°

Condition: new, pressure 1,5 kN stroke 40 mm throat 70 mm Working height from to 75 - 170 mm table surface area 115 x 70 mm Lsdpfjfv Av Dex Ancoaa weight of the machine ca. 11 Kg dimensions 115 x 175 x 290 mm Hand presses with rack HZ 150 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: new, pressure 17,0 kN stroke 60 mm throat 105 mm Working height from to 75 -180 mm Ledpfx Anefv Avnecsaa table surface area 170 x 130 mm spindle diameter 25 mm weight of the machine ca. 35 Kg dimensions 260 x 130 x415 mm Knee lever hand presses SPECIAL PRICE!!! HK 1700 stroke 60 mm with crank with fine adjustment of working height Stand height 450 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: new, pressure 8,0 kN stroke 40 mm throat 90 mm Working height from to 50 - 200 mm table surface area 120 x 160 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x410 mm Ledjfv Avkepfx Anceaa Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Condition: new, saw blade diameter 250 mm capacity 90 degrees: round 85 mm capacity 90 degrees: square 75 mm capacity 90 degrees: flat 100x65 mm capacity 45 degrees: round 80 mm capacity 45 degrees: square 75 mm capacity 60 degrees: flat 90x60 mm Laedpod Iipcofx Ancoa total power requirement 0,8 kW weight of the machine ca. 0,04 t SPECIAL PRICE!!! The assembly saw with extensive standard equipment and a large cutting area · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Automatic cooling directly on the saw blade · 24 V safety switch in the handle with restart lock · 38 kg total weight = easy to transport · Length stop, assembly tool Options: Saw blade 57 EUR Machine base type 20505 192,-EUR