Used Amtec Fb S1 for sale (6,615)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,200 kg, maximum load weight: 8,300 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 6,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Central axle trailer, low-bed Fine-grain steel welded construction Gear-supported front leg Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels Side impact protection, aluminum Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (rocker equalization) Wheels and tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable Platform TTS Low-lying steel pan, platform floor made of steel/diamond plate, steel walls solidly welded to the floor Platform length 4500 mm Pan front and side with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 12 pieces on each side) Note: Slight floor waviness due to welding distortion is possible! 2 pairs of lashing eyes, 1 x at the front in the corners of the steel pan and 1 x at the rear in the floor, each 5 tons. Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally movable with handrail on the ramps covered with wood (tip area with steel/diamond plate) with gas spring for single-person operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of approval/signs Hedpfji Ri Ebex Amyer Country of approval: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame painted or galvanized, according to customer requirements Ramps, hot-dip galvanized Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,520 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis: Central axle trailer, low loader Fine-grained steel welded construction Gear-supported front support Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels with anti-splash flaps only on the last axle Aluminum side impact protection Front crossbar that can be inserted into the floor holes Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (linkage compensation) Wheels and tires 235 / 75 R 17.5" as per manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Hedpezcnugjfx Amyer Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Parking sockets for electrical wiring, ABS/EBS and air connection to the drawbar 24 Volt EBS, Electronic Braking System with EBS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side coupled with the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED Premium LED side marker lights, with "20 LED diodes per light" 2 x 7-pole fail-safe plugs at the front, with connecting cable Platform TTS low-lying steel tub, platform floor made of steel/non-slip metal plate, steel walls firmly welded to the floor Platform length 5500 mm Tub with "Load-Lock profile" at the front and on the side for attaching lashing straps (8 pieces at the front, 16 pieces on each side) 2 pairs of lashing rings, 1 x at the front in the corners of the steel tub and 1 x at the rear in the floor, each 5 tons 3 pairs of additional lashing rings in the floor, each 5 tons 4 pairs of lashing rings screwed onto the side walls Ramps Steel ramps, 2,300 mm long, 510 mm wide, can be shifted sideways with handrail on the ramps covered with wood (tip area with steel/non-slip metal plate) with gas spring for single-person operation Rear wall / rear corner posts Screen-printed panel, 400 mm high, pluggable, between ramps Operating instructions The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Country of registration / signs Country of registration: Germany Type approval according to EG 2007/46 prepared for license plate holder, single-line Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning sign according to ECE - 70 Custom-made transport solution

Condition: used, mileage: 21,815 km, power: 324 kW (440.52 HP), first registration: 03/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro5, Year of construction: 2018, Equipment: ABS, all wheel drive, electronic stability program (ESP), navigation system, MAN TGS 18.440 Fire Department 4x4 Magirus TLF 4000 * EZ: 01.03.2018 * 21,815 km * EURO 5 Hsdpem Ti Axsfx Amyor * Automatic * Wheel arrangement 4x4 * TLF 4000 * 10518 cc * 324 kW * Ringfeder trailer coupling * Rettbox charging connection * Empty weight: 11,230 kg * Permissible total weight: 18,000 kg * Technically possible total weight: 21,000 kg * PROTEK monitor on the front of the bumper: Working pressure 200 PSI at 14 bar * Alco APF 2.5 -C -HH on the roof: 2,000 l/min, 16 bar * Magirus fire department body * Magirus fire extinguishing centrifugal pump * Teklite Floodlight mast TF440XB/4 * Tires: Conti Scandinavia HS3 front 385/65 R 22.5 14 mm & 14 mm * rear 315/80 R 22.5 12/14 mm & 13/13mm * Leader Mix 200-1000 v2 * TLF 4000 standard * Water tank: 4500 l * Foam tank 300 l * Second foam tank 200 l * 3 seats * Wheelbase 3.95 meters * ABS * ASR * German truck * 1 car owner * All information without guarantee * Further information and criteria on additional services * Repainting, retrofitting possible * Temporary license plate Customs license plate / License plate * Transfer and shipment possible / Transfer and shipment possible * Help with customs and export documents / Help with customs and export documents * Procurement of COC and EUR documents / Procurement of COC and EUR documents * On the market since 1991 / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to view and inspect a truck with us? You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, mileage: 1,094,480 km, power: 300 kW (407.89 HP), first registration: 10/2009, fuel type: diesel, empty load weight: 8,690 kg, maximum load weight: 9,310 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, loading space volume: 14 m³, Equipment: ABS, air conditioning, cabin, central locking, cruise control, low noise, traction control, trailer coupling, Vehicle location: Bovenden, mtl. house, 1x comfort seat, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), automatic, storage box, ADR equipment, leaf-air suspension, air+light trailer hitch, low-noise G1, U-protection, roof hatch, radio remote control, green environmental badge Wheelbase: 3900 mm Body: Esterer tank body with 3 compartments approx. 14.000l (6080l/2520l/5510l), radio control disc brakes on VA and HA, Duo-Matic coupling heads and EC brake connection, ADR type class AT, CD radio pre-equipment telephone, fax, pre-equipment CB radio, storage box, fixed on engine tunnel, distributor cockpit, Mercedes PowerShift G 211-12/14.93-1.0, air suspension rear axle, main tank 300 l, aluminum, power take-off MB 124-10b, flange, N-speed, comfort trailer coupling G 150, driver comfort suspension seat, Grammer, Actros 3. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hedpfx Amsvhlb Rjysr - .

Condition: used, mileage: 520,938 km, power: 300 kW (407.89 HP), first registration: 04/2004, fuel type: diesel, empty load weight: 8,685 kg, maximum load weight: 9,315 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,200 mm, brakes: constant throttle, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: steel-air, number of seats: 2, total length: 2,500 mm, total width: 3,220 mm, front tire size: 385/65R22.5, rear tire size: 315/80R22.5, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, immobilizer system, low noise, power assisted steering, traction control, Vehicle location: Bovenden, Mtlg. House, 1x comfort seat, 1x couch, electric mirror, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, Telligent automatic gearshift II, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, front exhaust, differential lock, fog lights, ADR equipment, fire extinguisher box, leaf-air suspension, air+light trailer hitch, aluminum tank, aluminum rims, G1 noise reduction system, U-protection, side aluminum road guard, 2-chamber Aluminum side protection, 2 compartments, roof hatch Wheelbase: 4200 mm Body: Esterer tank body from 1991 with 13500l tank capacity divided into 2 compartments (6460l/7040l) 7.5t front axle, rear axle H6 disc wheel 440 13t, disc brakes on front and rear axle, Telligent brake system with ABS and ASR, additional rear axle stabilizer, front underride guard, ADR type class AT, Duo-Matic coupling heads and EC brake connection, parameterizable special module (PSM), distributor cockpit, Telligent automatic gearshift II, pollen filter, transmission oil cooling, transmission lock for power take-off, additional long-distance package, power take-off with two shafts, tank capacity: 300l, power take-off MB 124-10b with flange and M speed. Next tank test until 12/2018! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hsdpovhhrxefx Amyjr - .

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, Please note that the images are archive images! The vehicle may be in use. Additional information: Chassis: Central axle semi-trailer, low-bed Fine-grained steel welded construction, geared support leg at the front, telescoping rear support, chocks with holder, mudguards made of sheet steel over both wheels Coupling device: Central axle semi-trailer Drawbar with tested 40 mm drawbar eye, drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearings and S-cam brakes, axle/chassis laser-aligned, reducing tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking system 2-line compressed air braking system, spring-loaded parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin connector at the front, with connecting cable Platform TTS low-lying steel trough, platform floor made of steel/checkered plate, steel walls welded solidly to the floor, platform length 5500 mm, trough with Load-Lock profile at the front and on the sides for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight unevenness in the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel trough and 1 x at the rear in the floor, each 5 tons. Additional pair of lashing eyes in the floor, each 5 tons Hsdpfx Amjqmc Rasyjr Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with handrail on the ramps, covered with wood, with gas spring for single-person operation Operating instructions The stated total weight is technically possible; depending on the load, the total weight may not be reached while adhering to the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Registration country/signs Registration country: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Please note that the images are archive images! The vehicle may be in use.

Condition: used, mileage: 987,000 km, power: 260 kW (353.50 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2025, color: silver, gearing type: automatic, emission class: euro6, loading space length: 7,450 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Well-maintained refrigerated box truck Mercedes Benz Antos 1835 with Lamberet freezer box, liftgate, and Thermoking refrigeration unit (diesel/electric). Special equipment: Axle load - measuring device, front axle load 8.0 t, airbag on driver's side, audio system: CD radio (Bluetooth), right exterior mirror with maneuvering position, battery 220 Ah, brake connection standard and DuoMatic, compressed air connection in the cab, air horn, driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: brake assistant (Active Brake Assist 3), driver assistance system: lane keeping assistant, driver assistance system: roll control assistant, cab: steel-sprung, comfort, transmission 12-speed - type: G 211-12, info display 12.7 cm with video function, fuel tank: 290 liters, aluminum, right, engine power take-off at the front with preparation for Frigoblock, enhanced engine brake, tire pressure monitoring system, reversing warning system (audible warning signal outside), liftgate switch, rear crossmember reinforced, circuit breaker, seats in the cab: passenger seat armrest, seats in the cab: driver's seat comfort suspension seat, sun visor outside, sun blind for side window, driver's door, 24V socket in the passenger footwell (additional). Additional equipment: Emission standard EURO 6, axle configuration: 4x2, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, Antos, exhaust pipe to the center of the vehicle, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air tank steel, compressed air unit medium, cab: width 2.30 m, cab: tilting device hydraulic, cab: S ClassicSpace, cab: reinforced (Sweden), cab floor with engine tunnel 320 mm, suspension: leaf / air, suspension: front springs 7.5 t, 2 leaves, electric window lifts, windshield tinted, generator 100 A, urea tank (AdBlue): 60 liters, manually operated sunroof (steel), rear axle bevel gear 440, body/superstructure: chassis, comfort locking system, steering pump unregulated, air intake from the front, engine 7.7 liters - 260 kW R6 diesel (OM 936), engine compartment encapsulation, ramp mirrors, spare wheel, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger functional seat, splash guard front, stabilizer front axle, socket in the cab 24V, tachograph / EC control unit, underbody panel aerodynamically shaped, front underrun protection, preparation for toll collection, front axle angled, permissible total weight 18.00 t Hjdpsxai Dcjfx Amysr Tire condition: front axle approx. 40%, rear axle approx. 50%. The engine was overhauled at approximately 600,000 km, and the exhaust system was renewed in 2025. Errors and prior sale excepted!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013325, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 11/2023, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, The images shown are archive images. The vehicle may still be in use. Chassis: Central axle trailer, low-bed Fine-grained steel welded construction Gearbox support leg at the front Telescopic rear support Chocks with holder Mudguards made of steel sheet over both wheels Side impact protection, aluminum Coupling device for central axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker arm compensation) Wheels and Tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin connector at the front, with connecting cable Bridge TTS Low-lying steel pan, bridge floor made of steel/non-slip steel plate, steel walls solidly welded to the floor Bridge length 5500 mm Pan at the front and side with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight undulation of the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel pan and 1 x at the rear in the floor, each 5 tons Additional pair of lashing eyes in the floor, each 5 tons Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handrail on the ramps covered with wood (tip area with steel/non-slip steel plate) Hedpfx Amszadb Doyor with gas spring for single-person operation Operating instructions The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor handling and tracking behavior possible due to incorrect load distribution) Country of Registration/Signage Country of Registration: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame: RAL 5002 Ultramarine Blue Ramps: Hot-dip galvanized The images shown are archive images. The vehicle may still be in use.

Condition: used, diameter div. number 36x tool adaptor SK 40 Hedpjwtrzgsfx Amyor

Condition: new, Year of construction: 2026, Horizontal packaging machine for pre-made bags, including an auger filler for powdery products and a linear weigher for granules or bulk materials. The auger filler and linear weigher are mounted on movable frames and can only be operated alternately; simultaneous filling of the bag is not possible. Suitable for pre-made flat bags, doypacks, block-bottom/flat-bottom bags. Tools and modules for specific bag features such as zip/pressure seals, twist-off closures (spouts), gusset shapes, batch/date printers and gas-flushing modules can be integrated for extra charge. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Horizontal packaging machine specifications: max. speed of the machine in neutral: 12 cycles/minute; bag width: 100-300 mm; bag length: 100-350 mm; required compressed air pressure: 0.65 MPa; compressed air consumption: 0.2 m³/min; power supply: 220V, single-phase; power consumption: 1kW; housing: 304 stainless steel; machine dimensions: approx. L1754xW510xH1617mm. - Auger filler specifications: max. speed of the machine in neutral: 50 cycles/minute; dosing range: 50-100g (further ranges available on request); hopper capacity: 50 litres; accuracy: ±1.5%; hopper with side opening; housing: 304 stainless steel; parts in contact with the product: 304 stainless steel and acrylic (viewing window); PLC-controlled; dosing screw driven by a servo motor; power supply: 220V, single-phase. - Linear weigher specifications: max. speed of the machine in neutral: 60 cycles/minute; number of weighing heads: 4; capacity per weighing container: 0.5L; weighing range: 10-150g (further ranges available on request); accuracy: 0.2-1g; parts in contact with the product: 304 stainless steel; plastic dust cover; operation via touchscreen; power supply: 220V, single-phase. Included are 2 movable racks made of 304 stainless steel, as well as an output conveyor belt for transporting the finished bags. The photo shows only the horizontal packaging machine. Further photos available on request. Hjdpfx Amev Nll Esyjr

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Hedpfjykuh Nex Amyor 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) Hjdpeyktv Sjfx Amyer - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 2026, condition: new, Machine to close cans by flanging the lid onto the can. Semi-automatic version, the can is placed manually below the flanging unit. - Specifications: Can diameter: customized, can height: customized; max. speed of the machine in neutral: 20 cycles/min; power: 220, 0.55kW; machine dimensions: L400×W600×H1450mm; weight: 150kg. Hedpfxov Nk Tho Amysr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2026, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The production process includes unwinding of the nonwoven from the jumbo roll, slitting for a 2-lane production process (until packaging), dipping into liquid, longitudinal folding in Z- or W-fold, cross cutting (tissue length), 1 x cross folding, stacking, continue to packaging unit which handles film feeding and wrapping wet wipes, punching the hole (to open the pack), positioning of reclosable label, bag cutting/heat sealing. Integrated splice units increase efficiency during material, film and label role changeover. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or W shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(70-100)xW(40-100) mm; dimensions of unfolded tissue: L(140-200)xW(140-200) mm; number of wet wipes per pack (min. to max.): 5-30 pieces; grammage wet wipe: 35-80g/m²; speed of the machine in neutral: max. 900 wipes/minute or max. 90 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 280 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 280-400 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; power: 25kW, 380V; machine dimensions: L8500xW1520xH2350 mm; weight: 5000kg. Hedpfx Aev Nma Romyjr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Auger Filler with integrated load cell for permanent weight feedback during the filling process. Stand-alone version for semi-automatic filling. Suitable for dosing and filling powdery products into bags, cans, jars, or other containers. PLC controlled with touch screen for operating. Equipped with servo motor for the dosing auger, level sensor, filling head height adjuster, dustproof cover. - Specifications: dosing range: 1-25kg (change of dosing auger necessary); accuracy (depending on product and total weight): up to 1kg max. ±2g, 1-10kg max. ±0.2%, 10-25kg max. ±0.1%; max. speed of the machine in neutral: 8 cycles/minute; hopper volume: 75L; power supply: AC220~380V, 3-phase; power consumption: 3kW; compressed air and compressed air consumption: 0.6MPa, 0.1m³/min; machine dimensions: L1135xW890xH2500mm; weight: 350kg. Hodpfx Amow D Ek Ajyjr

Condition: new, Year of construction: 2025, Auger Filler with weight feedback (after the dosing process has been completed) via connected weigher. Automatic version with link belt conveyor for transport of cans, jars, containers. Suitable for dosing and filling powdery products into cans, jars, or other controlled with touch screen for operating. Equipped with servo motor for the dosing auger, level sensor, filling head height adjuster, dustproof cover. - Specifications: dosing range: 1-1000g; accuracy (depending on product and total weight): 1-100g max. ±2%, 100-1000g max. ±1%; max. speed of the machine in neutral: 25 cycles/minute; hopper volume: 25L (standard), 35L (on request); power supply: AC220~380V, 3-phase; power consumption: 1.2kW; compressed air and compressed air consumption: 0.6MPa, 0.5m³/min; machine dimensions: L1500xW760xH1850mm; weight: 160kg. Hedpfsw D Elaex Amyjr

Condition: new, Year of construction: 2025, Auger Filler with weight feedback (after the dosing process has been completed) via connected weigher. Automatic version with link belt conveyor for transport of cans, jars, containers. Suitable for dosing and filling powdery products into cans, jars, or other containers. PLC controlled with touch screen for operating. Equipped with servo motor for the dosing auger, level sensor, filling head height adjuster, dustproof cover. - Specifications: dosing range: 10-5000g (change of dosing auger necessary); accuracy (depending on product and total weight): 1-100g max. ±2%, 100-500g max. ±1%, 500g-5000g; max. ±0.5%; max. speed of the machine in neutral: 25 cycles/minute; hopper volume: 50L (standard), 70L (on request); power supply: AC220~380V, 3-phase; power consumption: 1.6kW; compressed air and compressed air consumption: 0.6MPa, 0.5m³/min; machine dimensions: L2000xW970xH2030mm; weight: 300kg. Hjdpfxsw D Elgj Amysr

Condition: new, Year of construction: 2024, functionality: fully functional, Capping system with vacuum function for jars with twist-off lids. Hedpfx Aev Hgxbomysr Fully automatic capping machine with automatic lid feed. Designed for capping twist-off lids on jars, including a vacuum pump for vacuum-sealing the jars. Technical data: Speed: Max. 3500 jars/hour (depends on the material and size of the lid); jars and lid formats: tool available for 3 formats: jars height: 176mm and lid TO82; jars height: 124mm and lid TO82; jars height: 92mm and lid SCT 66 RTS/RSB. Torque lid closure: 5-30Nm; Vacuum: ≥38 kPa; Number of capping heads: 6 pieces in a row; Compressed air required and consumption: 0.4MPa; 0.3m³/minute; Power supply and power consumption: ~380V, 50Hz/60Hz, 3kW; Dimensions: ~ L5950xW1250xH2010 mm; Total weight: ~ 800kg.

Condition: new, Year of construction: 2025, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: in the standard version the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Method for attaching the thread to tea bags: by heat sealing into the tea bag edge. Grouped bag output either counted individually or in an erected box (optional). - Specifications: max. speed of the machine in neutral: 115 cycles per minute; dosing volume: max. 6cm³; tea bag dimensions LxW: 62.5x50 mm; roll width tea bag material: 125 mm; suitable tea bag material: 16.5-21g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 80x70 mm; sachet material: heat sealable mono films or laminated composite film; label (LxW): 28x24mm; thread length: 210mm; power supply: 220/380V; power consumption: 2.5W; machine dimensions LxWxH: 1688x1330x2205 mm; weight: 1210kg. Hsdpfx Amjv Nm Sgeysr

Year of construction: 2025, condition: new, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: in the standard version the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Method for attaching the thread to tea bags: by heat sealing into the tea bag edge. Grouped bag output either counted individually or in an erected box (optional). - Specifications: max. speed of the machine in neutral: 115 cycles per minute; dosing volume: max. 10cm³; tea bag dimensions LxW: 65x62.5 mm; roll width tea bag material: 125 mm; suitable tea bag material: 16.5-20g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 82x75 mm; sachet material: heat sealable mono films or laminated composite film; label (LxW): 28x24 mm; thread length: 220 mm; power supply: 220/380V; power consumption: 2.5W; machine dimensions LxWxH: 1688x1330x2205 mm; weight: 1210kg. Hedov Nm Smspfx Amyer

Year of construction: 2025, condition: new, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 115 cycles per minute; dosing volume: max. 10cm³; tea bag dimensions LxW: 65x62.5 mm; roll width tea bag material: 125 mm (optional 140 mm); suitable tea bag material: 16.5-21g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 82x75 mm; sachet material: heat sealable mono films or laminated composite film; label (LxW): 26x24 mm; thread length: 220 mm; power supply: 220/380V; power consumption: 3kW; compressed air required: 0.6 MPa; compressed air consumption: 100-300l/min; machine dimensions LxWxH: 2840x122x2205 mm; weight: 1410kg. Hsdpfxev Nm Sts Amysr

Condition: new, Year of construction: 2025, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 05 cycles per minute; dosing volume: max. 20cm³; tea bag dimensions LxW: 75x75 mm; tea bag capacity: 5-8g; roll width tea bag material: 155 mm; suitable tea bag material: 16.5-21g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 82x75 mm; sachet material: heat sealable mono films or laminated composite film; power supply: 220/380V; power consumption: 3kW; compressed air required: 0.6 MPa; compressed air consumption: 100-300l/min; machine dimensions LxWxH: 2800x1310x2250 mm; weight: 1410kg. Hodjv Nm S Hopfx Amyer

Year of construction: 2025, condition: new, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 65 cycles/min; bag sizes: L(40-250)xW(50-170)mm, (double film pulling possible for longer bags); suitable film width: 120-360mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 3.7kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.5m³/min; dimensions (LxWxH): 1400*1320*2040mm; weight: 580kg. Hsdpfxsv Nm T Ro Amysr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 10-1500g; volume per weighing head: 2.5L; weighing accuracy: X(0.5); discharge flap: double flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 60 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 4.1kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.6m³/min; dimensions (LxWxH): 1780*1260*2480 mm; weight: 820kg. Hodpfx Amov Nm Unjyer

Condition: new, Year of construction: 2025, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). VFFS machine is operated in slanting position to allow protection of easy breakable products like thin deep frozen food or bakery products. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 1~60g; volume per weighing head: 0.3L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 55 cycles/min; bag sizes: L(40-250)xW(50-170)mm, (double film pulling possible for longer bags); suitable film width: 120-360mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 3.7kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.5m³/min; dimensions (LxWxH): 1866*1316*2158mm; weight: 580kg. Hedov Nnarepfx Amysr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.