Used Almig Belt Xp 6 for sale (55,595)

Condition: used, functionality: unexamined, Year of construction: 1979, Various used housing parts for SBM-Vöest 10/6/4 Export Itedpfoxv U S Rsx Ahbsn

Condition: used, Year of construction: 2005, x-travel 600 mm y-travel 500 mm z-travel 600 mm Iedpfx Aovxwq Eohbetn control iTNC 530 Heidenhain table surface area 900 x 500 mm spindle turning speed - stepless 0-12.000 U/min spindle drive 10 kW tool taper SK40 DIN 69871 tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m Chip conveyor scraper belt Coolant system 3 pumps / cartridge filter Grundfoss high-pressure pump type CRK2-220/22 A-W-A-AUUV

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, Immediately available: new variable screw compressor ALMIG F-DRIVE 22 (5 to 13 bar) Cotroller: Aircontrol Premium Isdpstpw I Hofx Ahbstn Year of construction: 2024 Operating hours: 2 Bh Technical specifications Type: F-Drive 22 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.44 / 4.14 m³ / min at 6 bar (g): 0.43 / 4.12 m³ / min at 7 bar (g): 0.42 / 4.11 m³ / min at 8 bar (g): 0.50 / 3.89 m³ / min at 9 bar (g): 0.58 / 3.66 m³ / min at 10 bar (g): 0.67 / 3.47 m³ / min at 11 bar (g): 0.75 / 3.26 m³ / min at 12 bar (g): 0.85 / 3.02 m³ / min at 13 bar (g): 0.94 / 2.79 m³ / min Nominal power drive motor: 22 kW Degree of protection / insulation class drive motor: IP 55 / ISO F Operating voltage / frequency: 400/50/3 V / Hz / ~ Sound pressure level (DIN 45635 part 13): 70 dB(A) Compressed air connection: 1“ G Length: 790 mm Width: 800 mm Height: 1757 mm Weight: 356 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm Itjdpfjtp S E Eox Ahben The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: excellent (used), Features Used belt conveyor from the manufacturer Overbeck Color: blue Feet must be ordered separately Incl. SEW motor Material: steel Ideal for rapid material transport Professionally disassembled and packaged Condition: fully functional 1 unit in stock Belt conveyor In the picking area, the belt conveyor is ideal for connecting machines or workstations and optimizing internal processes. During transport, the belt conveyor can move delicate and differently sized containers, boxes, or other packaging and item units to the delivery or collection point, and can also be used as a connecting section before or between production and processing machines. Furthermore, it enables efficient parts transport within the company and warehouse and is used for conveying significant quantities and distances. Ijdpfx Aedu T Abjhbjtn Technical data: Dimensions of the belt conveyor Overall length: 1,610 mm Overall width including motor: 620 mm Overall width without motor: 510 mm Belt information Belt width: 400 mm Belt type: Grip Condition: New Frame Height: 140 mm Width: 30 mm Material: Steel

Condition: good (used), Year of construction: 2014, Almig ALM260 Refrigeration Dryer Itodpfx Aswhwlyehbjn Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 4,00 m³/min

Condition: as good as new (ex-display), Year of construction: 2025, New speed controlled ALMIG LENTO 37 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control P Technical specifications Type: LENTO 37 LK Itjdpfx Aoh Unqaehbon Possible overpressures of the compressor: (infinitely adjustable): 5 to 12 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,41 / 6,67 m³/min at 6 bar min/max : 1,40 / 6,41 m³/min at 7 bar min/max : 1,39 / 6,14 m³/min at 8 bar min/max : 1,38 to 5,86 m³/min at 9 bar min/max : 1,37 to 5,60 m³/min at 10 bar min/max : 1,35 to 5,34 m³/min at 11 bar min/max : 1,34 to 5,09 m³/min at 12 bar min/max : 1,33 to 4,48 m³/min elektric motor power: 37 kW Operating voltage / frequency: 380 V / 41/148 Hz Residual oil content: 0 mg / m³ SPL: 50% load: 74 dB (A) 100% load: 77 dB (A) Length: 2300 mm Width: 1400 mm Height: 2265 mm Weight: 1650 kg Compressed air connection: G 1 1/2" inch

Condition: used, Year of construction: 1975, functionality: fully functional, power: 33.1 kW (45.00 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 60 t, stroke length: 140 mm, throat depth: 280 mm, We are offering this used Osterholt EXPA 60 eccentric press, manufactured in 1975, for sale. Machine number: 873368 Iodpfozlgz Nsx Ahbetn Type: EXPA 60 Pressing capacity: 60,000 kg Stroke length: 280 mm Minimum ram height: 100 mm Adjustable ram: 60 mm Adjustable stroke: 10–140 mm Motor power: 45 hp Mains voltage: 380 V If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2017, overall weight: 120 kg, Equipment: documentation/manual, ABB IRB 360-8/1130 FlexPicker Manufacturer: ABB Model: IRB 360-8/1130 FlexPicker Robot type: Delta/Parallel robot, 4-axis Design: High-speed pick-and-place industrial robot Payload: up to 8 kg Reach: approx. 1,130 mm Application area: Pick & Place, sorting, packaging, assembly, and material handling Controller: ABB IRC5 Mounting: Ceiling mounting Drives: Servo motors Axes: 4 Protection class: depends on the specific design Application areas: Food industry, packaging technology, pharmaceutical industry, consumer goods industry, and general automation Description: 1 x ABB FlexPicker robot IRB360-8/1130 Itedjz Euakjpfx Ahbsn 1 x IRC5 Single 1 x Handheld control panel FlexPendant DSQC679 1 x Gripper, Schunk GmbH 1 x Various spare parts The robot is disassembled. An inspection in Karlsruhe is possible. Description for the advertisement: The ABB IRB 360-8/1130 FlexPicker is a fast, 4-axis delta industrial robot for automated pick-and-place applications. The robot is designed for high cycle rates and precise handling and is particularly suitable for sorting, packaging, assembly, and transferring products. The design with a payload of up to 8 kg and a working range of approx. 1,130 mm enables its use in various automated production facilities.

Condition: new, Year of construction: 2026, operating hours: 1 h, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min Itodpfx Asdtm Ndohbjn at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 66 dB (A) 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37-315 series is designed for extremely economical operation in every kW class thanks to its unique design concept, making it suitable for a wide range of applications. These compressors with fixed speeds are particularly well suited as base load compressors. Separation system – highest compressed air quality through proven multi-stage separation Air Control P – the intelligence of the compressor; it thinks, monitors and documents. Thanks to the possible internet connection, there are practically no limits to communication. Drive system – highly efficient, reliable direct drive Compressors – powerful, excellent efficiency Cooling unit – large-surface coolers for the lowest compressed air outlet temperatures and optimal coolant temperatures System fan – powerful, efficient, high-performance Drive motor – robust, designed with power reserves ALMiG Direct 75 Year of manufacture: 2010 Final pressure: 11 bar Motor power: 75 kW Volume flow according to ISO 1217 (Appendix C-1996): 11.58 m³/min Length: 2300 mm Width: 1400 mm Height: 1860 mm Weight: 1970 kg Itjdpfx Ahjttucgebjn Operating hours: 7637 h Load hours: 6317 h Idle time: 167714 h Total volume delivered: 4,506,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available on request!

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 Compressor, Screw Compressor, 10 bar The screw compressors of the GEAR series are particularly suitable for very high compressed air requirements. The maintenance- and service-friendly drive concept of the GEAR compressors includes a robust drive motor with high power reserves. The highly efficient gearbox operates with minimal slippage, high operational reliability, and an efficiency of over 98%, resulting in almost lossless operation and thus protecting the drive. Furthermore, the highly efficient coolant separation enables a minimal residual oil content of only 2–3 mg/m³. The encapsulated design of the gearbox makes these systems ideal for use under the harshest operating conditions. Isdpfx Ahettv Ibsbetn Ideal for very high compressed air demands Robust drive unit with high power reserves Almost lossless concept with an efficiency of > 98% Maintenance- and service-friendly drive concept ALMiG Gear 132 Year of manufacture: 2011 Final pressure: 10 bar Motor power: 132 kW Volume flow: 18.04 m³/min Length: 2800 mm Width: 1400 mm Height: 2025 mm Weight: 3830 kg Operating hours: 10,337 h Load hours: 9,378 h Downtime: 13,887 h Total delivered volume: 11,333,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Isdpec Rt D Njfx Ahbotn Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: good (used), Year of construction: 2018, machine/vehicle number: 14418098, Offer 19370 Technical data: - Volume flow rate approx. 1447 m³/h. - Negative pressure 2200 Pa Itedezgcywepfx Ahbjn - Filter area 9.5 m² - Drive power 400 V / 2.2 kW - Space requirement W 1750 x H 2150 x D 900 mm - Weight approx. 350 kg

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 310B069, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fanuc Series 18i-MB, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, BRIDGEPORT XP3-760 - Manufacturer: Bridgeport - Model: XP3-760 / VMC 760 XP3 - Serial Number: 310B069 - Year: 2005 - Machine Type: CNC Vertical Machining Center Itjdszvf Suopfx Ahbjn - CNC Control: Fanuc Series 18i-MB - Number of Axes: 3 - X-Axis Travel: 760 mm - Y-Axis Travel: 610 mm - Z-Axis Travel: 610 mm - Table Size: Approx. 890 × 600 mm - Maximum Table Load: Approx. 907 kg - Spindle Speed: 12,000 rpm - Spindle Motor Power: 25 HP / approx. 18.6 kW - Spindle Taper: BT-40 - Automatic Tool Changer: 30 tools - Tool Change Time: Approx. 4 sec chip-to-chip - Rapid Traverse X/Y: Approx. 43 m/min - Rapid Traverse Z: Approx. 36 m/min - Spindle Nose to Table: Approx. 100–709 mm - Machine Dimensions: Approx. 3,940 × 2,340 × 2,340 mm - Machine Weight: Approx. 6,580 kg

Condition: new, Year of construction: 2026, Display Model: COMPRESSED AIR REFRIGERANT DRYER ALMIG ALM-DGO 365 with time-controlled condensate drain Type: ALM-DGO 365 Volume flow rate: 6.08 m³/min* Year of manufacture: 2026 Constant pressure dew point of +3°C to +5°C for maximum process reliability. Minimal pressure drop ensures immediate energy savings. Short start-up and response times guarantee rapid availability. Iodpjz Egtijfx Ahbetn Optimized heat exchanger design for maximum efficiency. Robust construction for reliable continuous operation. Refrigerant R513a: efficient, eco-friendly, and durable. Compact footprint / Space-saving design. Technical Specifications: Max. operating pressure: 16 bar Max. inlet temperature: 70°C Min./max. ambient temperature: +5°C to +50°C Average power consumption: 0.94 kW Voltage / Frequency: 230V / 50Hz Compressed air connection: 1 1/2" Dimensions (L x W x H): 527 x 627 x 1123 mm Weight: 74 kg Financing & Showroom: Convenient leasing options via our partner bank are available for new machines. Feel free to visit our showroom / retail store. We constantly stock a wide selection of new and used compressors!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, conveyor belt length: 4,450 mm, conveyor belt width: 600 mm, total length: 4,500 mm, total width: 800 mm, total height: 600 mm, overall weight: 550 kg, discharge height: 3,000 mm, power: 1.1 kW (1.50 HP), type of input current: three-phase, input frequency: 50 Hz, 371 conveyor belt 445x60cm paddle conveyor belt High performance paddle conveyor belt for sale in excellent condition length: 445cm speed: 18-21 meters/minute belt width: 60cm total width: 80cm belt paddle height 8 cm belt tray size: 52x29x8cm stainless steel cover steel frame Isdpfxeygcupo Ahbstn drive: geared motor 380/220v 50hz 1.1kw weight: ca 550kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, power: 18.5 kW (25.15 HP), travel distance X-axis: 1,600 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 815 mm, workpiece weight (max.): 2,300 kg, number of axes: 4, number of slots in tool magazine: 36, controller manufacturer: Fanuc, Equipment: CE marking, documentation/manual, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp Ijdou A U Nkepfx Ahbetn  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: used, Year of construction: 2006, Zum Verkauf steht ein größerer Posten pneumatischer Prozessventile mit Antrieb. Gesamtmenge: 96 Stück – ca. 65 Einheiten als komplette Ventile mit Edelstahl-Kugelhahn – restliche Einheiten: pneumatische Antriebe / Ersatzteile Die Komponenten stammen aus industrieller Anwendung (Prozessanlage) und wurden fachgerecht demontiert. Ein Teil der Einheiten wurde überprüft, mehrere Komponenten zeigen funktionsfähigen Zustand. Die vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: – Chemische Industrie Iedpfx Aey Nfzxehbstn – Lebensmittel- und Getränkeindustrie – Wasser- und Prozesstechnik – Wartung, Ersatzteilversorgung, Wiederverkauf Neupreis vergleichbarer Einheiten: ca. 120–300 € pro Stück. Sehr interessanter Posten für Händler oder industrielle Instandhaltung. Verkauf vorzugsweise komplett. Preis: 4.200 € VB Standort: Slowakei (EU) Versand europaweit möglich For sale: large lot of pneumatic process valves with actuators Total quantity: 96 units – approx. 65 complete units with stainless steel ball valves – remaining units: actuators / spare parts The components originate from industrial process application and were professionally dismantled. Some units have been checked, several appear to be in working condition. Full functional testing of all units has not been performed. Suitable for: – chemical industry – food & beverage processing – water treatment – maintenance and spare parts supply – resellers Estimated new price of comparable units: approx. 120–300 € per unit. Very attractive lot for traders or industrial maintenance. Preferably sold as one lot. Price: 4,200 € negotiable Location: Slovakia (EU) Worldwide shipping available

Condition: excellent (used), - Dimensions: 1006x595x1495 mm - Power supply type: Electric - Number of clamps: 3 - Smooth surface - Heating plates: 3 zones at the bottom, 2 at the top Itedpswyb T Eefx Ahbsn - Voltage: 400V - Power: 22 kW - Weight: 358 kg - Refurbished equipment: Equipment is prepared upon order; pickup and return times are agreed at that moment (please request price after refurbishment).

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Production batch for the rubber industry. Itjdpez Ix A Ijfx Ahbon

Condition: good (used), V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing Iedsu Sv T Nopfx Ahbstn -V-belt pulley: 6-groove pulley type SPB 315 x 6 -V-belt width: 17 mm -Mounting: Taper bushing Ø 75 mm (can be changed) -Dimensions: Ø 320 x 120 mm -Weight: 28 kg

Condition: good (used), V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 450 x 6 TB 4040 -V-belt width: 17 mm -Mounting: Taper bushing Ø 80 mm (can be changed) Iedsu Sv Tpspfx Ahbetn -Dimensions: Ø 455 x 120 mm -Weight: 42 kg

Condition: ready for operation (used), An Akon welding cell including Kuka robot and 2x Dinse welding sources is available. 1) Welding robot: Kuka KR 6 R900, payload: 6kg, reach: 900mm, control: KR C4 Compact, flange load: 25kg, total weight: approx. 170kg. 2) Automatic welding cell Akon Robotics with turntable and Kuka control system. 3) Welding power source Dinse Dix PI 900. The EP motor for the 4th axis was replaced in 2023. Documentation available. On-site inspection is possible. Iodpfxov H Dfxj Ahbetn

Condition: used, Mutoh XpertJet 1641SR 64″ Eco-Solvent Printer Uses Mutoh’s new MS-41 Eco-Solvent ink Environmentally conscious 1-liter ink bags Automatic Bi-Directional Alignments User-friendly touch panel Print speeds up to 600 sqft/hr New media feed system internal LED Lighting 30kg take-up included Print Technology- Drop-on-demand Micro Piezo Inkjet Technology Print Head-1 Piezo Nozzle Configuration - 180 nozzles x 8 lines/head Drop Mass Range (pl)- 3.5 to 35 Head Heights- Low: 1.5 mm / middle 2.5 mm / High: 4.0 mm Isdpfx Ahez Srypebetn Max. Media width 1625 mm (63.97") Max. Print Width 1615 mm (63.58") Max. Media Thickness 0.3 / 1.3 / 2.8 mm Media MeasurementsØ 150 mm / 2" or 3 " / 30 kg Standard non-motorised roll-off system Ink Type MS41 Eco Solvent inks 1 litre packs in foil, for use in reusable ink cases Ink Colours CMYK Low Chemical Emissions Certification GREENGUARD Gold, wallpaper Category UV Durability 3 Years outdoor without Lamination