Used Adam Mc 32 Fw for sale (10,077)

Condition: ready for operation (used), Rexroth CSH01.3C-ET-ENS-MEM-CCD-L2-S-NN-FW card, R911331933, serial number 7260402210804, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nedpfx Afsz Aadre Sjdb

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 5101163, spindle motor power: 30,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, type of input current: three-phase, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, total height: 3,800 mm, total length: 9,100 mm, total width: 7,300 mm, distance table center to spindle nose: 950 mm, overall weight: 29,000 kg, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 700 mm, coolant supply: 20 bar, table length: 3,500 mm, table height: 900 mm, table width: 1,200 mm, number of slots in tool magazine: 45, Equipment: chip conveyor, documentation/manual, The machine is in working condition and has no problems. Ndedpfezq Rz Dox Af Sjb

Condition: excellent (used), functionality: fully functional, Harp racks for glass transportation 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg More technical information can be found attached as Tech. data file Ndsdszty Rmepfx Af Seb 4 units in stock In very good and clean condition As is Available immediately

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly. Nodpfjzmt Ufex Af Ssdb

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: Nedpfx Aszl E N Eef Sjdb 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2004, operating hours: 19,176 h, functionality: fully functional, machine/vehicle number: 2301-0160, Gildemeister Sprint 32 linear, serial number 2301-0160, year 2004. 2 x 4 = 8-axis configuration + rotary table + tool magazine. 8,000 RPM on both spindles. Nedpfx Afszxntao Sedb Operating hours: 19,176 / 15,274.

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm Njdpfx Ajz Ad Rcof Ssdb

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Technical data: Ndjdszmv Dvopfx Af Ssb Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading.

Year of construction: 2011, condition: used, We offer this used Mecc Alte ECO 32-2L/4 emergency generator, manufactured in 2011. Ndodpfx Aoz Eiqqsf Sob Type: ECO 32-2L/4 Nameplate ID: 0001525665 Date of manufacture: 09/2011 Number of phases: 3 Continuous operation: S1 Rated speed: 1500/1800 rpm Insulation class: H Rated power (40 °C, 50 Hz): 60 kVA Rated voltage (40 °C, 50 Hz): 115/200/230/400 V Rated current (40 °C, 50 Hz): 301/173/151/86 A Rated power (40 °C, 60 Hz): 72 kVA Rated voltage (40 °C, 60 Hz): 138/240/277/480 V Rated current (40 °C, 60 Hz): 301/173/150/86.6 A Rated power (27 °C, 50 Hz): 62.5 kVA Rated voltage (27 °C, 50 Hz): 115/200/230/400 V Rated current (27 °C, 50 Hz): 314/180/157/90.2 A Rated power (27 °C, 50 Hz) – 2nd set: 75 kVA Rated voltage (27 °C, 50 Hz) – 2nd set: 138/240/277/480 V Rated current (27 °C, 50 Hz) – 2nd set: 314/180/156/90.2 A Protection class: IP21 Weight: 286 kg Moment of inertia: 0.54 kg·m² Bearing designation: 6309.2RS If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1998, Available immediately from our location: Console milling machine REFORM Type UF 32 Year of manufacture 1998 Table 1400 x 300 mm Travel ranges X/Y/Z 1100/300/520 mm SK 50 Spindle speeds 31.5 - 1400 rpm Drive power 7.5 kW Digital display Hydraulic vise Weight 2.7 tons Many tools and milling cutters included Njdpfx Asz D Ah Tsf Sjdb Price: Euro 2,750.00 + VAT, ex works

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm Ndedezktg Aepfx Af Seb V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Nedpfx Afezwudco Sedb Automatic feed Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: excellent (used), functionality: fully functional, pressing force: 3 t, Force 32 kN, stroke 100 mm Ndsdpszxmhpsfx Af Sjb

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Main and counter spindle • Maximum turning diameter: 32 mm • Maximum spindle bore: 32 mm • Maximum spindle travel (turning length): up to 310 mm • Spindle speed (main & counter spindle): up to 6,000 rpm • Spindle power (main spindle): 5.5 kW • Spindle power (counter spindle): 3.7 kW • C-axis: Available on both the main and counter spindle (0.001° or 5° mechanical indexing) Axes and control • Number of axes: 9 controlled CNC axes (X1, Z1, Y1, C1, X2, Z2, C2, X3, Z3). • Rapid traverse speed: 32 m/min. • CNC control: MAIER PRO - GE FANUC (Fanuc 18iT) Tooling system and machining • Total number of tool positions: Up to 24 tool stations (depending on the configuration, up to 16 of these are powered/rotating). • Cross-axis machining: Typically 5 to 6 fixed turning tools (shank cross-section 16x16 mm) and 4 powered stations. • Back-side machining: Available for simultaneous operations on the main and counter spindle. Dimensions and weight • Machine weight: approx. 3,800 kg to 4,200 kg (machine weight only, excluding bar feeder). Nodpfszvfupjx Af Sedb • Dimensions (L x W x H): approx. 2,640 mm × 1,600 mm × 1,900 mm. • Coolant capacity: approx. 240 liters

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 69 Turning length: 500 mm Turning diameter: 340 mm Swinging diameter over bed: 530 mm Spindle speed: 4,200 rpm Tool holder: BMT 60 Tool turret, 12 stations (powered) C-axis: 0.001 degrees Equipment: - One-touch IGF - Chip conveyor - Touch setter - 3-jaw chuck Kitagawa B-210 - NC tailstock Ndodezwlw Topfx Af Sjb

Condition: new, total length: 2,785 mm, Year of construction: 2024, load capacity: 3,200 kg, Crane Ndedpfx Afjzupwle Sjb JMG MC 32S Drive Electric Year built 2024 Lifting weight (kg) 3,200

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 21O0400016-04, total height: 6,557,000 mm, total width: 2,450,000 mm, total length: 8,290,000 mm, type of input current: three-phase, input voltage: 380 V, power: 90 kW (122.37 HP), Equipment: CE marking, type plate available, The Mixer is a machine designed to blend materials of different consistencies, such as pruning residues and digestate, within the composting process. Feeding can be automatic via conveyor belts or manual using a loader operated by an operator. The machine is in nearly-new condition and can be applied in various fields; it can be inspected and tested, including with specific products. Nedpfsw Tir Iox Af Sodb

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Maximum drilling capacity: Njdpfxezuarme Af Ssdb for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: new, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for powering the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Modular system, all driven tools are from WTO, Made in Germany incl. ejection of long parts Scope of supply: FANUC Oi TF+ CNC control with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bushing unit Guide bushing type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling unit for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear machining Rear machining with 4 machining stations ER16 Drive unit for tools for rear machining, 2 stations fixed and 2 stations driven Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece remover Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adaptation up to 100 bar) Nsdjvyzqfepfx Af Sodb Coolant through the counter spindle Automatic central lubrication with level monitoring Tool box with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control functions in standard scope of supply: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hours display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread cutting with variable pitch (G34) Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) 4 additional free M commands

Condition: good (used), axle configuration: 2 axles, first registration: 02/1968, color: blue, Year of construction: 1968, Rear axle 1: Double wheels Ndodpfxsz Dw D Ne Af Ssb Rear axle 2: Double wheels Empty weight: 7.325 kg Carrying capacity: 24.675 kg GVW: 32.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information Fruehauf / Hydraulic Ramps / 32 Ton

Condition: new, Nexturn SA32B with the following attachments: - Loading magazine Iemca Boss 338 Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for supplying the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Modular system, all driven tools are from WTO, Made in Germany incl. discharge of long parts Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bush unit Guide bush type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling device for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear face machining Rear face machining with 4 machining stations ER16) Drive unit for tools for rear face machining on 2 stations fixed and 2 stations driven Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece ejector Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adjustment up to 100 bar) Coolant through the counter spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar loader magazine Interface for chip conveyor PCMCIA card slot USB interface RJ-45-LAN interface RS 232 C interface Control functions in standard scope of delivery: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hour display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel Nedpfxsvyzp Is Af Ssdb High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread milling with variable pitch (G34) Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main spindle and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) 4 additional free M commands

Condition: used, Year of construction: 2001, machine/vehicle number: 0-34-07-5949, functionality: fully functional, input voltage: 24 V, input current: 48 A, input frequency: 50 Hz, cutting height (max.): 320 mm, cutting width (max.): 60 mm, We offer this used HOMAG Optimat chf 41 circular table saw, year of construction 2002. Manufacturer: HOMAG Model: Optimat chf 41 Construction year: 2002 year Condition: used Category ID: 2094 Type ID: 1612 Machine type: circular table saw Nsdjzq Hwhopfx Af Ssdb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm Ndodpfxsxrnr Ne Af Seb NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: Ndedpfx Afszmh Awe Ssb - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: used, Year of construction: 2008, High-speed radial drilling machine Alzrapid 32 With MK4 tool holder Quill feed, Thread cutting device, Nsdpfxjzhbl Us Af Sjdb Operating manual.