Used Abc-Group Spray Booth 7.2X5.2M for sale (5,645)

Condition: excellent (used), Year of construction: 2010, Cylindrical grinding machine Fab. Robbi Group Typ. Omicron 600 RT5 Year 2010 Technical data Hedpewhm Rfofx Aitefn Make Robbi Group, IT Type OMICRON 600 RT5 Year of manufacture 2010 table Center width 600 mm Sanding length max. 600 mm Swivel range + 9° / - 5° Center height above table 160 mm Workpiece weight between centers 120 kg Workpiece weight for fly grinding 40 kg Tailstock Quill stroke 25 mm Quill diam. 43 mm Internal mounting cone CM 4 Workpiece headstock Rotation speed 0 - 600 Internal mounting cone CM 4 Spindle passage 26 mm Grinding wheel Diameter 450 mm Width min 20 / max 50 mm Bore 127 mm Equipment - Manual or automatic cycle - Automatic dressing compensation - Simplified presetting of grinding wheel and workpiece All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW Hfsdpfozvq Rcex Aitsn The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: used, Year of construction: 2006, operating hours: 5,126 h, functionality: unexamined, power: 3,500 kW (4,758.67 HP), overall weight: 43,200 kg, Complete oil-fat-fuelled cogeneration unit. ABC 16VDZC-1000 electric engine, AVK DIG150L-6 alternator. Complete system including supervisory management and all peripherals. The entire installation is still assembled as originally configured and can be inspected. Please contact via email. Hodpfx Aiey Hiuqstjfn

Condition: used, Year of construction: 2011, Colour: White Weight: 7.500 kg Hfjdpfx Aiezmvawetsn Price: On request - Year: 2011 - Documentation available: Yes - CE certificate present: No - Max. working width [mm]: 1300 - Number of spray booths [pcs]: 1 - Type of pump: Wagner - Options: Spray gun - └ Number of spray guns [pcs]: 4 - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 7 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: STERIVAP 6612, For sale is a BMT STERIVAP 6612 steam sterilizer from an active food production facility. The autoclave was originally designed for medical applications and is currently used successfully for sterilizing beverage bottles. Up to 350 bottles are processed per sterilization cycle on specially adapted transport trolleys. The unit features integrated steam generation, a modern Siemens control system with a touchscreen, and programmable sterilization cycles with stored programs for temperatures above 121 °C. The system is in very good technical condition. The heating elements have been replaced, wear parts have been regularly exchanged, and all maintenance has been performed on an ongoing basis. The autoclave is currently in daily operation and can be inspected under production conditions until August 2026. Further details: Usable volume: 610 liters Pass-through design Integrated steam generation Siemens control system with color touchscreen Display currently set to Polish, other languages possible Programmable sterilization cycles Stored programs > 121 °C Heating elements replaced Regular maintenance Wear parts regularly replaced 1 transport trolley included Additional transport trolleys available Currently used in a food processing facility Inspection possible during operation Available from 01.09.2026 Location: 58-508 Siedlęcin, Poland Price: €20,900 (negotiable). Hjdpezccunsfx Aitsfn

Condition: good (used), functionality: fully functional, REF: MM6466 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Hfjdpfxezudu So Aitjn Manufacturer - OK International Group. Model - SB-40 EU. Serial number - 218-2527-23 Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left.

Condition: refurbished (used), Year of construction: 2020, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWa 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan mounted above the wall + Fan height adjustment Airflow: 7,200 m³ / h Motor: 0.75 kW, explosion-proof (ATEX) Exhaust pipe: 500 Ø mm Depth: 900 mm The piping should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paint stop filter mat Hodofv Hiqjpfx Aitofn Clamping rail (+150 EUR net) Options/additional cost for: Paint stop filter mat with clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* complete with an motorized wire decoiler Hedpfx Aiey Ehrfjtefn table diamtere: 1.500 mm loading capacity: 1.500 Kg.

Condition: ready for operation (used), functionality: fully functional, PANEL SAW Carriage length: 1600 mm Cutting height: 75 mm Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Spindle diameter: 30 mm Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Conventional knives Hedpfx Aiszz N Nnetefn HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016

Condition: good (used), Year of construction: 2013, Sorter for Light Loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 Trays, with 261 Target Configuration – Used – : Sorter price incl. control system: ex-works: €99,500 (net), including dismantling, packaging and loading! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Model: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control system: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6,000 trays/h Total system length: 53 m Total system width: 14 m Number of induction stations: 1 Induction station width: 2 m Number of trays: 200 pcs Usable size per tray: 450 x 700 mm Tray pitch: 520 mm Hedowxu A Repfx Aitsfn Chute width: 680 mm Number of drives: 3 pcs Product dimensions (L/W/H): Sorter: min.: 150 / 120 / 10 mm max.: 600 / 400 / 200 mm Weight: min.: 0.25 kg / max.: 5 kg No longer available: the roller conveyors, pick-by-light system, flap elements. There were two targets per sorting station, sorted into the upper or lower target roller conveyor via tilting chutes. Total number of targets on the sorter: 261 targets in the system. Number of targets for special purposes (overflow, reject, etc.): 3 pcs. A pick-by-light system is installed on the target roller conveyor. This means all components installed downstream of the trays after discharge are no longer present and are therefore not part of the sale! Condition: good Available: immediately Location: warehouse in Frankenberg/Saxony Detailed description available on request as PDF (in English).

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm Hfodpfxst R T Hcs Aiton - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: refurbished (used), Year of construction: 2014, operating hours: 20,000 h, DG Tech – Authorized BLM Group Inspection Center DG Tech was established as a spin-off from DGService to specifically address the market for used BLM Group machines. Leveraging our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. Hodpfx Aiszhw H Ietjfn We manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high-quality standards. We handle logistics, disassembly, and transportation directly, eliminating the risks associated with private sales. In partnership with BLM Group, we provide dedicated software, technical training, and post-sales support. We also offer flexible operational leasing solutions to optimize investment and productivity. Configuration: BEAM LOADER L=6500mm, UNLOADER 4500 mm, ROFIN DC 020 LASER SOURCE, CHILLER, LT120 EXHAUST SYSTEM, LT120 WELDING SEARCH OPTICAL SYSTEM, INTEGRATED MICRODOSING.

Condition: refurbished (used), Year of construction: 2020, Dear customers, For quick and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. Hfsdofn Nddspfx Aiten We look forward to hearing from you and will be happy to assist you! TSWc 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H + Fan at the top Airflow: 10,800 m³ / h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat Clamping bar (+€180.00 net) Options/additional cost for: Paintstop filter mat clamping bar: €180.00 net Side guide plates with hinge: €590.00 net Images may vary. We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: used, Year of construction: 1994, Main Group Vilor injection molding machines for manufacturing plastic components; previously used for production of soles and components for footwear manufacturing; option to additionally purchase molds for shoe soles with the machines; machines were operational until the end and have been unused for 4 years; good condition, require refurbishment; Hfjdpfxoy Egvpo Aiton

Condition: good (used), OMAG / AFFRI 903 RSD Hardness Testing Machine: Professional, stationary bench-top hardness testing machine from the renowned Italian manufacturer OMAG di AFFRI DAVIDE s.r.l. (Model 903 RSD). Semi-automatic hardness tester for Rockwell, Super-Rockwell, Brinell, and Vickers hardness testing methods according to ASTM and DIN EN ISO. The RSD series hardness testers are suitable for all conditions, both in the workshop and in the laboratory. Rockwell and Brinell HBTW hardness values with high accuracy (better than 0.5%) in almost any testing environment. Accurate measurement results are achieved from the very first test. The load is applied using a dynamic load cell. A user-friendly interface with real-time statistics, graphics, and large archive storage, as well as conversion to other methods, makes measuring a breeze. For hardness testing on virtually all metals: iron, steel, hardened steel, cast iron, brass, aluminum, copper, and metal alloys. The device has been regularly inspected and certified by the DAkkS-accredited laboratory 3-Rath Kalibrier + Prüftechnik (last inspection on April 28, 2025, for the HRC method according to DIN EN ISO 9000ff). Technical data: Manufacturer: OMAG / AFFRI Group (Italy) Model: 903 RSD Serial number: 76599 Testing method: Rockwell (including calibrated HRC) Voltage: 115 – 230 V Weight / Testing force: 195 Kgf Special feature: Height-adjustable test head for flexible workpiece sizes. “Everything from one source: We would be happy to offer you suitable bank financing for your project.” Hfjdpfx Aiozni D Eston More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2002, I.MA.L. GROUP TYPE: 105/33 SHEET METAL LENGTH: 3300 mm CAPACITY: 105 tons MADE IN ITALY Hfsdszky E Sspfx Aitsn

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min Hfsdpfszv Tdfox Aiton - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Hfodpoy Ufgrefx Aitjn Rollers and Alignment Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Tension and Cutting Control AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Rewinding Control A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication.

Condition: used, Year of construction: 2022, machine/vehicle number: 15084, functionality: fully functional, cutting width (max.): 420 mm, empty load weight: 3,100 kg, cutting length (max.): 200 mm, saw blade length: 5,500 mm, motor model: IE3, Equipment: documentation/manual, SECOND-HAND TS 400 THIN CUTTING HORIZONTAL BANDSAW CE RULES TECHNICAL DATA: Hfedpjyam U Tefx Aitsn SPECIAL DEVICE "OFFSET": DEVICE "DOUBLE SPEED": - Max. cutting capacity 420x200 mm - Distance from blade to conveyor 2-150mm - Min. cutting thickness from the top 0.75 mm - Saw wheel diam. 800 mm. - Saw wheel thickness 50 mm - Sawblade length 5500 mm. - Sawblade width 50 mm. - Sawblade speed 17-34 m/s - Conveyor belt size 400x4200mm - Oil mist cooling system - High accuracy hydraulic blade tension system (2500 kg) - Variable feed speed 0-25 m/min - Feed motor 2HP with inverter - Main motor 30 HP with inverter - Blade lift motor 2 HP - Dust hood outlet diam. 125 mm x 2 - Machine net weight Kg. 3100 - Air loaded pressure roller - Slow cutting start function - Spraying jets for blade lubrication - Motor IE3 INCLUDED - S/N 15084 - Year 2022

Condition: new, Year of construction: 2027, RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. Hfsdpfsvxfkaex Aitsn STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction fan is placed at the top of the filter wall, its electrical motor is placed out of the fan channel and there is no direct contact of the motor with the contaminated air in order to avoid the risk of spark. FILTRATION SYSTEM Extraction filter is used as 2 stages with 99,9% efficiency, placed at the side of the spray booth filter wall. There is a pre-filter at the door curtain that maintains natural airflow inlet during extraction fan is operating. Warning lamp at the control panel indicates service need when the filters get contaminated. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: good (used), functionality: fully functional, We are selling our chip conveyor in technically and visually perfect condition. Hfjdpfx Aiszxbgtstjn

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 1731124010219J, Allpax Angle Sealing Device / Packaging Machine Manufacturer: Hualian Machinery Group Model: PTHW-WS-5045 Serial No.: 1731124010219J Year of Manufacture: 01/2024 Condition: used Color: light grey Internal Item Number: 2025120105 Pick-up Address: Industriestraße 5 (47918 Tönisvorst) The machine was in operation until dismantling. Tailor-made Solutions for Your Intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, as well as packaging machines, we are your competent partner! We are happy to provide you with an individual offer or advise you on system design or installation queries. Simply let us know your requirements and site conditions. Hsdpfjx Ak Nrsx Aitsfn Benefit from our years of experience and excellent network of experts. We have already successfully completed projects for companies in a variety of sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will find ways to optimise your processes and material flow cost-effectively and sustainably. We can also offer fully automatic sorting systems or complementary components, such as picking racks or containers.

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min Hfjdpfx Asx Aqdcjitjn 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: excellent (used), Furniture Carcasse (Case) through-feed Press Clamp "LIGMATECH" Mod. CabTeq T200 (MDE 120 / 25 / 08) - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - HOMAG powerTouch - Total installed power Kw 10 - Total length of the machine mm 6350 Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2500 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 220 /1320 Hedpoz D A Iyofx Aitjfn Motorized transport carpet (length mm 3000) Motorized transport carpet (length mm 3000)

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Stationary reciprocating compressor with a balanced horizontal configuration. Three-stage, double-acting design with intercooler, crossheads and circulating-water cooling. Capacity: 17.88 m³/min. Discharge pressure: 16 bar. Speed: 721 rpm. Crankshaft power input: 199.4 hp. Serial No.: 21968. Hjdpfozvcfrjx Aitofn