Used Sjsz 51/105 for sale (6,359)

Condition: used, mileage: 50,000 km, power: 18 kW (24.47 HP), first registration: 07/1951, fuel type: diesel, empty load weight: 1,630 kg, maximum load weight: 1,520 kg, overall weight: 3,150 kg, axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, number of seats: 2, Year of construction: 1951, Equipment: all wheel drive, cabin, Vehicle location: Bovenden, auxiliary drive Unimog 2010, Type 401/51 Vehicle details: Exterior color: Green Interior: Black leather seats Equipment: Auxiliary drive for PTO operation at the front and rear Restoration: Hfsdpfxszyvdpj Ag Ejn The vehicle has been extensively restored. The restoration costs amount to approximately €40,000. Optional trailer: A suitable trailer can be purchased for an additional cost of €5,000. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, mileage: 645,478 km, power: 220 kW (299.12 HP), first registration: 04/2009, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 01/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 LE 13m (49+51+1) (Vehicle 129) First registered: 04/02/2009 645,478 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 01/2027 Hedpfx Agoz E Aa Se Eefn Permissible gross vehicle weight 19,000 kg, unladen weight 11,590 kg, payload 7,410 kg Overall length 13,570 mm x overall width 2,550 mm x overall height 3,400 mm Tires 275/70R22.5 all around, approximately 80% remaining Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Retarder Electric windows 2 x electric + heated mirrors Auxiliary heater + 2nd heater Stop brake 49+51+1 seating arrangement Emergency exit 12-volt socket LAWO MOBITC 400 Frame members with some corrosion 01/10/2024: Rear axle left wheel hub sealed, front axle left brake caliper replaced. 04/05/2024: Front axle left upper control arm + bearing replaced. 10/22/2024: Water filter replaced. 01/22/2025: Front axle right brake caliper replaced, relay valve in front of the rear axle left replaced. 02/28/2025: Compressor head replaced, oil pan gasket replaced, pressure regulator replaced. 11/27/2025: 4-circuit protective valve replaced. Various signs of wear and tear, consistent with the age of the vehicle. Last inspection at 642,493 km on 04/21/2026, next inspection at 702,493 km. Price: 5,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties, for disputes up to a value of €10,000, is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: excellent (used), Year of construction: 2011, Buderus GE315 boiler Output: 105Kw Year: 2011 Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. Hfsdpetu Ub Sefx Ag Een The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: good (used), BOSCH Type 1 PCPNL 486 A Panel 1070080135-105 Control Panel AC 230V/115V/0.4A/0.8A Item condition: Used _RD You can find more control panels – new and used – in our shop! International shipping costs available upon request! Hfjdpfx Ajpufqhog Een

Year of construction: 2017, condition: ready for operation (used), X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening width: 1055mm, foundation/installation area: 1520x2080mm, weight: 2.8t. An on site inspection is possible. Hjdjzcfk Ejpfx Ag Eefn

Condition: used, Year of construction: 2002, functionality: fully functional, Homag Profi Line CHF 51/32/32 Panel Saw with Cut-Rite software optimization - Year of manufacture: 2002 - Cutting width: 3200 x 3200 - 3 tables with air curtain - Saw projection: 102 mm Hfodpjx Ey Nvjfx Ag Eon - Cutting height: 85 mm - Main blade 400 mm - Main motor 11.2 kW (15 HP) - Incisor blade with independent motor

Condition: excellent (used), Year of construction: 2015, PRATTO mesh welding line ( 3D mesh production line ) Technical data for the machine • 2 stands for feeding the cross and line wire • Wire diameter between 3 ÷ 4.2 mm Hodpfozq Ez Sox Ag Ejfn • Fence dimensions between 1.2 to 2.5 m (example 1.2 x 2m, 1.5x2.5 m, 2.5 x 2.5 m) • Programable machine with CNC, where all the programs are stored • Power drive (including hydraulics + cooler) • Electric servo-motor driving system for fence transportation • Automatic stacking of fences (max. 50 pcs) • Working speed up to 120 strokes/min (1 fence in 30 sec- depending of the dimension of the fence

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump, radial piston pump -Double hydraulic pump: radial piston pump with clutch -Pump: unfortunately no exact type designation -Part No.: A3918 2 515 105 780 -Clutch: Kupplungstechnik Rheine PL 350/15/ -Dimensions: see photo technical. drawing -Dimensions: 730/470/H470 mm Hjdepy Rybopfx Ag Ejfn -Weight: 164 kg

Condition: used, empty load weight: 3,050 kg, maximum load weight: 6,900 kg, overall weight: 9,950 kg, axle configuration: 2 axles, first registration: 04/2019, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,530 mm, loading space volume: 44 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 14 x lashing eyes, 2 rows of lashing rails, , --  Misprints, errors and changes reserved, Sample pictures --, More details at: !, More details: ! Hodpfx Agjz Stqce Ejfn

Condition: new, Year of construction: 2026, machine/vehicle number: DMS 51 E, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, type of input current: three-phase, planing width: 510 mm, tool diameter: 100 mm, rotational speed (min.): 5,000 rpm, total length of planing tables: 860 mm, overall weight: 640 kg, Equipment: CE marking, Thickness planer DMS 51E with a three-row spiral cutterhead, 84 knives, four-way rotatable, and reversible indexable inserts 15x15x2.5mm. Planer width 510mm, 2 table slide rollers with fine adjustment in the thickness table. The thickness table is mounted on four large-sized spindles, ensuring stability and preventing tilting; the height adjustment of the thickness table is motorized via push buttons with fine adjustment and an electronic digital display, as well as an integrated handwheel on the side. Thickness table dimensions are 860 x 530mm, working/planing height is 3.5-230mm. Maximum chip removal is 6mm. Steel infeed roller with spiral teeth for optimal feed, and a satin-finished steel outfeed roller. Feed speed is continuously adjustable from 4-20 m/min. Hodpfx Ajz E A U Njg Esfn Minimum working length is 240mm. Dust extraction nozzle Ø160mm, standard with noise protection cladding. The robust steel-cast iron construction ensures a perfect planing result. The machine is test-planed at our facility before delivery.

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox Hfedpfxoyzc Efs Ag Esn 4-spindle thickness table guide Electric thickness table adjustment

Condition: used, Year of construction: 2002, I.MA.L. GROUP TYPE: 105/33 SHEET METAL LENGTH: 3300 mm CAPACITY: 105 tons MADE IN ITALY Hfsdpfx Aozky E Sjg Esn

Condition: like new (used), functionality: fully functional, gearing type: mechanical, fuel type: diesel, color: yellow, first registration: 01/2017, suspension: hydraulics, Year of construction: 2017, operating hours: 4,175 h, machine/vehicle number: JCB 533-105, Equipment: cabin, pallet forks, Sollevatore telescopico JCB 533-105 Telehandler Hfjdpfjz E Ei Aex Ag Een

Condition: used, Year of construction: 1989, Used Machine Features and Technical Specifications: - Small machine for processing molded parts - Processes hot-melt adhesive-coated edging material, which is reactivated using hot air - The workpiece is automatically fed by pressing it against the central, driven pressure roller, ensuring uniform adhesive reactivation and, consequently, reliable bonding - Thermostatic temperature control via a dial thermostat - Maintenance-free three-phase hot-air blower for continuous operation Hsdozk N Ehjpfx Ag Ejfn - Automatic airflow deflection - Pneumatically operated roller cutting device trims even the toughest veneer and PVC edges - Foot switch for processing molded parts - Workpiece thickness: 10–50 mm - Heating power: 3 kW - Connected load: 3.3 kW - Workpiece width (min.): approx. 25 mm - Edge thickness approx. 0.5–1 mm - Minimum inner radius approx. 25 mm - Feed rate 4 m/min. - Pneumatic pressure: 6 bar Weight: approx. 105 kg Availability: available shortly Location: Röllbach

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M20L/8619, Offer Number: M20L/8619 Machinetype: rivet header Info: semi tubular rivets Make: NATIONAL Hfodpfx Ajwi Sbrsg Ejn Type: 51 Constr. year: 1980 diameter range: 5 mm shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 470 Location: In our warehouse

Condition: used, empty load weight: 3,580 kg, maximum load weight: 8,320 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 01/2022, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,630 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Tail lift Dautel DL 1500 L, load capacity 1,500 kg, 4-cylinder aluminum platform 1,800 mm long, 2 roll-off safety devices, with batteries and charging cable, front with portal doors for continuous loading with a short ramp plate, 14 tie-down points. Hfjdpfjz Smarox Ag Een -- Subject to printing errors, errors and changes. Sample images --. More details at: !

Year of construction: 2008, condition: used, Year: 2008 Condition: Functional, dismontled in the warehouse Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm Technical parameters: - Maximum sheet format: 740x1050 mm - Minimum printing format: 350x500 mm - Maximum speed: 15 000 sheets / hour - Usable materials: cca.60g/m^2 max 1,2mm - High of the stock: - loader 1300 mmm - unloader: 1200 mm - Double diameter impressions and transfer system Basic specification: Loader equipment: - Drive Tronic loader - Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups) - Format presetting from the Ergo Tronic controle panel Loading equiment: - Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel Print unit equipment: Hfodpfx Agoy H Hgdo Een - Automated plate changing (SAPC) Color wheel equipment: - Color Tronic tinting with 35 zonal blades, each 30mm wide Interpreter equipment: - Powder device WEKO AP 130 Gallery at the machine: - Ergonomic gallery on the device and oparator side Machine equiped: - Equipment for printing cardboard up to 1,2 mm o Manual skid steed loader o Equipment for carton management in printing units o Monitoring the pasage of sheets o Roll down roller shutter for stop-free unloading - Extended unloader / delivery 2600 mm - Full automatic plate changing with pneulatic plate bending device - Machine elevation by 375 mm - ACR Controle(automatic Register) - Connection to the existing Logotronic basic systém (CIP 3) - Connection to the existing Densitronic S console - Color zone status and measured values for Densotronic - Baldwin blankets and impression cylinders washing devices - Combined cooling / temperature controle - Baldwin unit - Grafix dusting with iuonization and connection to the controle panel - Infrared and hot air dryers in delivery

Year of construction: 1977, condition: ready for operation (used), Two Schütte six-spindle turning machines including one Iemca bar feeder are available. 1) Schütte SF 42, year of manufacture: 1977, number of spindles: 6, max. bar capacity: 42mm, max. longitudinal slide stroke: 125mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 6500mm/1400mm/2200mm, weight: approx. 10000kg. Including pick-off spindle, cams, collets, chip conveyor, oil mist extraction system and Iemca PRA40/33/P bar feeder. 2) Schütte SF 51 DNT, year of manufacture: 1987, max. bar capacity: 51mm, number of spindles: 6, max. turning length: 102mm, max. drilling depth: 102mm, spindle circle diameter: 340mm. Including pick-off spindle, CNC cross slide in position 4, cams, collets, auxiliary coolant pump and chip conveyor. Documentation available. An on-site inspection is possible. Hsdpfxozbuuwo Ag Eofn

Condition: new, Siemens 1FT7105-1AC71-1FH1 synchronous motor SN: YFB927855309001, encoder AM22DQ A45 / brake 24VDC 36.5W 3510050, unused, with storage marks, 100% functional, delivery as per photos. Hodpfox Du Unox Ag Esfn

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 0304/5599, functionality: fully functional, controller manufacturer: Delem, controller model: DA-65, working width: 3,000 mm, bending force (max.): 105 t, control type: CNC control, degree of automation: automatic, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, european tool clamping system, Crowning: Reflex - ACSG1 Priključna moč: 11 kW Tools: Possible with agreement. Hedpfxjxv Eafs Ag Eefn NEW UPPER TOOL HOLDERS. Last service: 05/2025.

Condition: used, Year of construction: 2018, operating hours: 114 h, functionality: fully functional, machine/vehicle number: 020559, working width: 1,450 mm, area performance: 10,150 m²/h, overall weight: 420 kg, tank capacity: 100 l, total height: 1,450 mm, total width: 1,250 mm, total length: 1,800 mm, gradeability: 18 %, fuel type: gas, fuel: liquid petroleum gas (LPG), For sale is a Kärcher KM 105/110 R LPG, manufactured in 2018. This sweeper was used to clean our warehouse and has 114 operating hours. The machine is in excellent technical condition and runs without any problems. Unfortunately, it does show some signs of wear and tear. The KM 105/110 is being replaced in our warehouse by a smaller sweeper, which is why we are selling it. The Kärcher KM 105/110 is a ride-on sweeper with Tact filter cleaning, automatic adjustment of the main sweeping roller wear via a teach system, and a new sweeping concept. The sweeper is equipped with 2 side brushes and a sweeping roller. Thanks to the brushes and the roller, manual sweeping is no longer necessary. All dirt is swept up cleanly by the brushes and the roller, even in corners. The highly effective and automatic Tact filter cleaning system ensures permanently clean pores, thus providing an optimal cleaning result. The filter elements have an automatic cleaning function, which has a positive effect on the machine's performance. The teach system ensures automatic correction of the sweeping roller in case of wear. The KM 105/110 has three adjustable contact pressures, which can be easily activated by pressing a button. In Eco mode, wear is reduced even further. Technical data: Drive system: hydraulic Drive type: gas Max. area performance (m²/h): 7350 Hjdpszvaxvofx Ag Ejfn Max. area performance with 2 side brushes (m²/h): 10150 Working width: 640 mm Working width with 2 side brushes: 1450 mm Sweeping material container: 100 l Climbing ability: 18 % Working speed: 7 km/h Weight (ready for operation): approx. 420 kg Dimensions (L × W × H): 1800 × 1250 × 1450 mm Additional features: - Forward and reverse drive - Hour meter - Coarse dirt flap with a dirt basket that can be emptied mechanically at the push of a button (see video) - Suitable for outdoor use - Kärcher Intelligent Key - Multifunction display - Overhead sweeping principle The Kärcher KM 105/110 is in stock at our warehouse and can be inspected at any time. Demonstrations can also be arranged at our premises. Please make an appointment with us in advance. The machine should be picked up from our warehouse. If a pickup is not possible, we can also arrange for the machine to be shipped. An 11 kg gas cylinder is not included in the scope of delivery. Gas can also be purchased from us as needed (only when picking up the machine!!).

Condition: ready for operation (used), Year of construction: 1986, screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Hfedezht H Rspfx Ag Een Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Spill containment tray in the chassis - Headboard - Welded frame Net price: €8,567.23 / Gross price: €10,195.00 Article number: URT226101322.11 Technical data: • Brand: Unsinn • Model: UR 10513-26-14 • Vehicle type: Special trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU (German technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 1050 x 131 x 22 cm • External dimensions (L x W x H): 1196 x 190 x 114 cm • Loading height of the floor: 60 cm • Permissible total weight: 2,600 kg • Unladen weight: 770 kg • Payload: 1,830 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • with plug-in and removable load securing headboard • High-quality welded steel frame construction, hot-dip galvanized • Several longitudinal and transverse supports made of special vehicle construction profiles • Maintenance-free axles with single-wheel suspension and maintenance-free compact bearings from the automotive industry for more driving comfort and safety. Cross members covered with wooden strips • Reinforcement beam with diagonal fastening option for lashing straps, loadable up to 600 daN (kg) • Storage option in the center, L = approx. 2000 mm • 1x support at the rear • Lashing options all around • Lashing eyes welded to the rails • Plastic mudguards • 4-wheel brakes with reverse automatic • Professional long-life brake cables for longer service life and better braking performance • ALKO hitch and parking brake Hsdpfx Aozy Af Hsg Eefn • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: used, Year of construction: 2024, operating hours: 682 h, functionality: fully functional, working width: 510 mm, area performance: 1,530 m²/h, overall weight: 240 kg, tank capacity: 55 l, This used, trailing-type scrubber dryer BD 50/55 W Classic from Kärcher (year of manufacture: 2024 | operating hours: 682) has been technically overhauled and cosmetically refurbished in our in-house workshop. The brush head and suction bar have been newly powder-coated. New suction strips and a new disc brush have been installed. Thanks to its compact design, the machine offers excellent visibility. The self-explanatory operation allows for easy starting and reduces the need for training. The standard curved suction bar ensures rapid drying thanks to the reduced residual water on the cleaned surfaces. The integrated drive system and the comfortable four-wheel system make it easy and energy-efficient to operate. An externally supplied charger ensures that the batteries are charged during daily use. The BD 50/55 is suitable for use in public buildings, in retail stores and car dealerships, as well as in industrial environments. Technical data: Working width, brushes: 510 mm Working width, suction: 850 mm Tank capacity, fresh/dirty water: 55 / 55 l Theoretical area performance: max. 2550 m²/h Practical area performance: 1530 m²/h Permissible total weight: 240 kg Hjdpfxez Nd Nqs Ag Ejfn

Condition: used, machine/vehicle number: 220.00452, power: 7.5 kW (10.20 HP), Used, functional ALUP compressor stage Air End Tri AG 51-S The stage is used and in working order. Art. No.: 220.00452 Motor: Hfodpjz Er Edofx Ag Een 7.5 kW 3970 rpm 16.5 A The price is €350 plus VAT. Freight shipping is available for an additional charge.