Used Zinser 2425-I for sale (53,754)

Condition: like new (used), Year of construction: 2023, Shimadzu LC-2050C 3D + RF-20AXS – Complete HPLC System – 2023 For sale is a high-end Shimadzu LC-2050C 3D liquid chromatograph, additionally equipped with a Shimadzu RF-20AXS fluorescence detector. Both instruments were manufactured in 2023. The set is unused and in very good cosmetic condition. System Configuration • Shimadzu LC-2050C 3D – Integrated HPLC System • Built-in PDA (Photodiode Array) detector • Shimadzu RF-20AXS – External FLD (Fluorescence Detector) • Integrated autosampler • Sample cooling • Column thermostat • Four-component low-pressure gradient • Integrated touchscreen panel • Dell computer • UPS / Emergency power supply • Accessories and cables as shown in the photos Shimadzu LC-2050C 3D – Key Parameters Pump • Flow rate setting range: 0.0001–10 mL/min • Four-component low-pressure gradient • Gradient setting range: 0–100%, step 0.1% • Maximum pressure: • 50 MPa at flow rates of 0.0001–3 mL/min • 44 MPa at flow rates of 3.0001–5 mL/min • 22 MPa at flow rates of 5.0001–10 mL/min • Integrated mobile phase degassing system Autosampler • Automatic sample injector • Sample injection volume range (standard configuration): 0.1–100 µL • Sample injection volume accuracy: ±1% at 50 µL • Sample cooling/thermostating capability • Sample cooling temperature range: 4–45°C PDA Detector The LC-2050C 3D version features an integrated PDA (Photodiode Array) detector, enabling spectral recording and analysis of multiple wavelengths. Thanks to the PDA detector, the system allows not only for standard chromatographic analysis but also for spectral evaluation of detected substances. Shimadzu RF-20AXS Fluorescence Detector The system has been additionally equipped with a high-sensitivity RF-20AXS fluorescence detector, significantly increasing the analytical capabilities of the entire set. RF-20AXS Parameters • Light source: Xenon lamp • Additional low-pressure mercury lamp for wavelength accuracy control • Wavelength range: 200–750 nm • Spectral bandwidth: 20 nm • Wavelength accuracy: ±2 nm • Wavelength repeatability: ±0.2 nm • S/N for the Raman peak of water: ≥2000 • Standard flow cell: 12 µL • Maximum cell pressure: 2 MPa • Cell thermostat • Ability to monitor two pairs of excitation/emission wavelengths simultaneously The combination of PDA + FLD (Fluorescence Detector) provides a wide range of analytical capabilities and allows for the determination of both standard UV/Vis absorbing compounds and substances requiring highly sensitive fluorescence detection. Device Data Shimadzu LC-2050C 3D • CAT. NO.: 228-65822-58 • Year of manufacture: 2023 Shimadzu RF-20AXS • CAT. NO.: 228-65305-58 • Year of manufacture: 2023 Application Pedpfszv Salox Ahcera The system is intended for, among others: • Pharmaceutical laboratories • Quality control • Chemical laboratories • Food industry • Environmental research • Research and development laboratories • HPLC analyses requiring PDA detection • Trace analyses using fluorescence detection Condition Year of manufacture: 2023 Device is unused. Very good cosmetic condition – consistent with the photos. Sale of a complete set: Shimadzu LC-2050C 3D + RF-20AXS + Dell computer + UPS + accessories shown in the photos. Additional photos, serial numbers, and information about the device can be provided upon request.

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Prodpfx Aeyilyqjhcsa Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: used, Year of construction: 2016, Mazak Variaxis i-700 5 Axis CNC Machining Centre with Mazatrol Smooth X CNC Control. S/No. 276585 (2016), 700mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 850mm Diameter x 500mm x 700kg, 40 Tool ATC, CAT40 Spindle Taper, Absolent A Mist 10 Oil Mist Filter Extractor, Mazak Spindle Chiller Unit, Cromar Swarf Management & Filtration System, Machine Weight 15000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Pjdpjzvcikjfx Ahcera Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1969, functionality: fully functional, machine/vehicle number: 8293 0769, grinding length: 1,200 mm, grinding width: 300 mm, table length: 2,300 mm, table width: 250 mm, -WR 109- Offered here is an ELB Schliff SW 12 VA I surface grinding machine. The machine is in good condition and fully functional. Predeznb Sbopfx Ahcoa The surface grinding machine features a hydraulic table. Technical data: Magnetic clamping plate: approx. 1200 mm x 300 mm Clamping area: 2300 mm x 250 mm Max. working height with new grinding wheel: 400 mm Max. working height with used grinding wheel: 400 mm Grinding wheel diameter: 300 mm Spindle motor speed: 1440 rpm Hydraulic motor speed: 1420 rpm Crossfeed motor speed: 930 rpm The machine is currently located in an external warehouse near Solingen. Inspection appointments with the machine running can be arranged up to July 31, 2026.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,240 h, Hurco VMX30i vertical machining center Year: 2018 Podozqzwpopfx Ahcera Power on hours: 8220 Spindle hours only: 2240 Technical details: X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table size 1020x510 mm Table load 1000 kg Spindle nose SK40 Spindle speed up to 12000 rpm Tool magazine 30 positions Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Rapid traverse rate in X/Y/Z : 35/35/30 m/min Weight 4800 kgs Accessories/options: - Through spindle coolant - Chip conveyor - Cooling System - Spindle Cooling Under power in our warehouse. Clamping units, vices, are not the scope of the delivery.

Year of construction: 2014, condition: ready for operation (used), A Kongsberg flatbed cutting and creasing plotter is available. Table dimensions X/Y: 1329mm/1834mm, working area X/Y: 1324mm/1624mm, max. speed: 50m/min, positioning accuracy: +/-0.2mm, repeatability: +/-0.05mm, material clearance: 50mm, max. tool force: 220kN, tool 1/2/3: drag knife/oscillating knife/creasing wheel, registration system: i-cut Vision Pro. Machine dimensions X/Y: approx. 2250mm/2000mm, weight: approx. 420kg, operating hours: approx. 250h. Documentation available. An on-site inspection is possible. Prjdpjzp Rfysfx Ahcoa

Condition: used, mileage: 340,800 km, power: 95 kW (129.16 HP), first registration: 07/2012, fuel type: diesel, next inspection (TÜV): 07/2028, color: white, gearing type: mechanical, emission class: euro5, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * 9,400.00 EUR net * Mercedes-Benz Sprinter 313 Cdi Maxi L3H2 Flex-i-Trans, 9 seats, wheelchair lift, air conditioning, Euro 5 * Seats (5+1) * Flex-i-Trans Pjdpfxozwz Ine Ahcjra * 6-speed transmission * Radio CD * Driver airbag * USB * Electric windows * Central locking * Automatic climate control * Tire pressure monitoring * ABS * ESP * Wheelchair lift, 400 kg capacity * Wheelbase 433 cm * Unladen weight 2798 kg * Payload 762 kg * Permissible total weight 3500 kg * Passenger car registration * Vehicle number 18 OPENING HOURS Monday - Friday, 09:00 - 17:00 (by appointment only...) CONTACT INFORMATION Phone: WhatsApp Email: Transit plates and customs plates (export number) available from us. Errors, typing errors, and prior sale are subject to change. Technical specifications and equipment features must be verified separately. The condition of the vehicle as per the contract is only what is inspected on site and confirmed in writing at the time of purchase. Please make an appointment.

Condition: ready for operation (used), A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible. Pedpfxsvamq Ds Ahcjra

Condition: used, Year of construction: 2000, machine/vehicle number: 13304, type of input current: three-phase, workpiece height (max.): 45 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 2,250 mm, edge thickness (max.): 3 mm, actuation type: electric, total length: 10,000 mm, total width: 8,500 mm, Equipment: CE marking, documentation/manual, We offer a two-sided edge banding machine, IMA COMBIMA I K/II/R75/760/V/R3, manufactured in 2000, renowned for its reliability and efficiency in professional edge processing. This model handles workpieces with a thickness of 10 to 45 mm and a width of 270 to 1300 mm, offering versatility in working with various materials. The feed rate ranges from 6 to 30 m/min, enabling efficient production while maintaining high quality. The machine handles edge banding with a thickness of 0.7–3 mm and workpieces with a length of 270 to 2250 mm, making it an ideal solution for demanding industrial applications. This is a robust option for companies seeking proven machines in good working condition. The machine features a new Beckhoff control system. Prodpfozgb A Dex Ahcoa It is possible to purchase the entire line, including a roller conveyor equipped with a conical rotating table and a two-chamber automatic loading station.

Condition: excellent (used), mileage: 561,000 km, power: 294 kW (399.73 HP), first registration: 05/2006, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, number of seats: 3, total length: 9,080 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 8,000 kg, loading space length: 5,400 mm, Year of construction: 2006, Equipment: crane, differential lock, = Additional options and accessories = - 20 Ft Twist Lock = Remarks = Crane Crane length: 10,10 m Number of hydraulic extensions: 3 Meter capacity: 23 m Capacity kilo: 9325 kg Superstructure Construction year: 2006 = More information = General information Cab: single Registration number: BR-ZL-60 Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Drivetrain Make of engine: Volvo Axle configuration Brakes: disc brakes Suspension: leaf suspension Front axle: Tyre size: 385/65 R 22.5; Max. axle load: 9000 kg; Steering Rear axle 1: Tyre size: 315/80 R22.5; Double wheels; Differential lock; Max. axle load: 10000 kg Rear axle 2: Tyre size: 315/80 R22.5; Max. axle load: 8000 kg; Steering Weights Empty weight: 14.340 kg Carrying capacity: 12.660 kg GVW: 27.000 kg Max. towing weight: 50.000 kg Functional Crane: Fassi F230AXP.23, year of manufacture 2006, behind the cab Condition Technical condition: very good Visual appearance: very good = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. Pjdszg E A Iopfx Ahcera We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: like new (used), Year of construction: 2018, Complete Aerzen D17L and D28L units are for sale. Prjdpelnlr Eefx Ahcsa Manufactured in 2018, they are in excellent condition and equipped with 15 kW and 22 kW motors. Warranty included. For more information, please contact me by phone or email.

Condition: used, mileage: 430,774 km, power: 95 kW (129.16 HP), first registration: 07/2012, fuel type: diesel, next inspection (TÜV): 07/2028, color: white, gearing type: mechanical, emission class: euro5, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €8,400.00 net * Mercedes-Benz Sprinter 313 Cdi Maxi L3H2 Flex-i-Trans, 9 seats, wheelchair lift, air conditioning, Euro 5 * Seats (5+1) * Flex-i-Trans * 6-speed * Radio/CD * Driver airbag * USB * Electric windows * Central locking * Automatic climate control * Tire pressure monitoring * ABS * ESP * 6 wheelchair spaces * Wheelchair lift, 400 kg capacity * Wheelbase 433 cm * Unladen weight 2798 kg * Payload 762 kg * Permissible total weight 3500 kg * Passenger car registration * Vehicle No. 42 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment...) CONTACT INFORMATION Phone: Pjdozmpwpjpfx Ahcjra WhatsApp Email: Transfer and customs plates (export number) available from us. Errors, typos, and prior sale are subject to change. Technical specifications and features must be checked separately. The condition of the vehicle as agreed upon in the contract is only valid for what is inspected on-site at the time of purchase and confirmed in writing. Please make an appointment...

Condition: used, mileage: 407,923 km, power: 95 kW (129.16 HP), first registration: 07/2012, fuel type: diesel, next inspection (TÜV): 07/2028, color: white, gearing type: mechanical, emission class: euro5, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €6,900.00 net * Mercedes-Benz Sprinter 313 Cdi L2H2 Flex-i-Trans, 9 seats, wheelchair lift, air conditioning, Euro 5 * Seats (8+1) * Flex-i-Trans * 6-speed transmission * Radio/CD player * Driver airbag * USB port * Electric windows * Central locking * Automatic climate control * Start/Stop system * Tire pressure monitoring * ABS * ESP * 4 wheelchair spaces Podpfx Ahozl N A Necera * Wheelchair lift, 400 kg capacity * Wheelbase 367 cm * Unladen weight 2584 kg * Payload 916 kg * Permissible total weight 3500 kg * Passenger car registration * Vehicle no. 3 OPENING HOURS Monday - Friday, 9:00 AM - 5:00 PM (by appointment...) CONTACT INFORMATION Phone: WhatsApp Email: Transit and customs license plates (export number) available from us. Errors, typing errors, and prior sale are subject to change. Technical specifications and equipment features must be checked separately. The condition as per the contract is only the one that is inspected on-site and confirmed in writing at the time of purchase. We kindly request that you make an appointment...

Condition: good (used), Year of construction: 1988, Saw blade dimensions: 275 x 3.3 x 40 mm Cutting capacity for straight cuts: Profiles and angles/pipes/solid material: 65 x 130/90/60 mm For miter cuts: Flat profiles and angles/pipes: 75 x 90/90 mm Pedpfx Ahszvw Uhocjra 2 saw blade speeds: 2000/4000 rpm Drive motor: 380 V, 1/1.2 kW Space requirement: 750 x 450 x 750 mm Weight:

Condition: used, mileage: 426,782 km, power: 95 kW (129.16 HP), first registration: 07/2012, fuel type: diesel, next inspection (TÜV): 07/2028, color: white, gearing type: automatic, emission class: euro5, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €8,400 net * Mercedes-Benz Sprinter 313 Cdi Maxi L3H2 Flex-i-Trans, 9 seats, wheelchair lift, air conditioning, Euro 5 * Seats (5+1) * Flex-i-Trans * Automatic transmission * Radio/CD player * Driver airbag * USB port * Electric windows * Central locking * Automatic climate control * Tire pressure monitoring * ABS * ESP Prodpfx Aezkqgaehcja * Wheelchair lift, 400 kg capacity * Wheelbase: 433 cm * Unladen weight: 2798 kg * Payload: 762 kg * Permissible total weight: 3500 kg * Passenger car registration * Vehicle No. 36 OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment...) CONTACT INFORMATION Telephone: WhatsApp E-mail: Transit and customs license plates (export number) available from us. Errors, typos and prior sale excepted. Technical specifications and features must be checked separately. The condition of the vehicle as per the contract is only that which is inspected on site at the time of purchase and guaranteed in writing. Please make an appointment...

Condition: excellent (used), Year of construction: 2018, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Psdpezmy T Ujfx Ahcjra Internal coolant system Chip conveyor Detachable handwheel

Condition: good (used), Year of construction: 2016, functionality: fully functional, Controller MAX5 DSM (2 x 19" screens) Table size 762 x 406 mm X-axis travel 660 mm Y-axis travel 406 mm Z-axis travel 508 mm Pedjy Du I Rjpfx Ahcera Spindle speed 10 – 12000 rpm Tool magazine 20 positions Tool holder SK40 Rapid traverse X/Y/Z 28 m/min Power 9,4/11 kW Footprint 2000 x 1800 x 2600 mm Machine weight 2850 kgs Accessories - Software options: 3D, DXF, AVG (realistic graphics), pockets/islands, ramp function, rigid tapping, cutting, tool and material database, NCPP and ISNC (macro ISO code programming), Ultimotion - MPG - Coolant water system - Chip auger - Signal light - Machine feet

Condition: used, Year of construction: 1989, Cutting length: 5300 mm Cutting height: 2100 mm Cutting depth: 80 mm Scoring unit: no Feed: manual Prodpfx Ajzqyyiohcea Horizontal cut display: scale Vertical cut display: scale Saw blade diameter: 300 mm Swiveling material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 6500 mm Machine depth: 1500 mm Machine height: 2800 mm Weight: 800 kg

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Prodpfoxwlthjx Ahcea Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: used, Microcutter Inotec I 225CD 110D This Inotec microcutter is a highly versatile machine, commonly used in the sausage and pet food industries. This inline cutter processes large quantities of product at high speed, producing a homogeneous mass while effectively mixing the ingredients simultaneously. The settings can be adjusted from coarse cutting to fine emulsions. The cutter is equipped with a large feed hopper positioned at a convenient working height. This allows the product to be easily fed into the machine, directly from a bowl cutter if required. The emulsifier is suitable for inline installation. The cutting set can be easily installed and removed. The cutting set experiences minimal wear, ensuring a long service life. Temperature sensors help maintain consistent product quality. The intuitive control panel allows for easy program configuration. The machine is mobile and can be moved as required. Technical specifications: Production capacity: 6,000–15,000 kg/h (depending on the product) Hopper capacity: 200 L Cutting plate diameter: 225 mm Hopper feed height: 890 mm Voltage: 400 V (3 + N, 50 Hz) Power: 127 kW Pedpfx Ajzwvxhohcsra Weight: 1,000 kg Year of manufacture: 2009 Machine dimensions (W x D x H): 1,200 x 2,250 x 1,300 mm

Condition: used, mileage: 383,895 km, power: 95 kW (129.16 HP), first registration: 07/2012, fuel type: diesel, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, emission class: euro5, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €7,900 net * Mercedes-Benz Sprinter 313 Cdi L2H2 Flex-i-Trans, 9 seats, wheelchair lift, air conditioning, Euro 5 * Seats (8+1) * Flex-i-Trans * 6-speed transmission * Radio CD * Driver airbag * USB * Electric windows * Central locking * Automatic climate control * Start/Stop system * Tire pressure monitoring * ABS * ESP * Wheelchair lift, 400 kg * Wheelbase 367 cm * Unladen weight 2584 kg * Payload 916 kg * Permissible total weight 3500 kg * Passenger car registration * Vehicle no. 38 OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment...) Prjdszvurkjpfx Ahcja CONTACT DETAILS Telephone: WhatsApp Email: Transit and customs plates (export number) available from us. Errors, typos and prior sale are subject to change. Technical specifications and features must be checked separately. The condition of the vehicle as per the contract is only what has been inspected on site at the time of purchase and confirmed in writing. Please arrange an appointment...

Condition: used, mileage: 321,948 km, power: 95 kW (129.16 HP), first registration: 07/2012, fuel type: diesel, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, emission class: euro5, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €8,400 net * Mercedes-Benz Sprinter 313 Cdi L2H2 Flex-i-Trans, 9 seats, wheelchair lift, air conditioning, Euro 5 Prodpjzvurwjfx Ahcoa * Seats (8+1) * Flex-i-Trans * 6-speed transmission * Radio CD * Driver airbag * USB * Electric windows * Central locking * Automatic climate control * Start/Stop system * Tire pressure monitoring * ABS * ESP * Wheelchair lift, 400 kg * Wheelbase 367 cm * Unladen weight 2584 kg * Payload 916 kg * Permissible total weight 3500 kg * Passenger car registration * Vehicle No. 32 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment...) CONTACT DETAILS Phone: WhatsApp E-mail: Delivery and customs registration plates (export number) available from us. Errors, typing errors and prior sale are subject to change. Technical specifications and equipment features must be checked separately. The condition of the vehicle as per the contract is only valid if it has been inspected on site at the time of purchase and confirmed in writing. Please arrange an appointment...

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: air, welding current at 60% duty cycle: 273 A, welding current at 100% duty cycle: 212 A, welding current (min.): 30 A, welding current (max.): 300 A, OTC CPTX-i 300C - MIG MAG Welding Machine New and Ready-for-use 24 Months Waranty Specifications: 30-300A Synergic 4 Roller Drive Fixed Programs Steel & Stainless Steel Weldable Including: 4 meter PRO2500 Mig Welding Torch 5 Meter Earth Work lead with Clamp and Dinse plug Gas cable 0,8-1,0mm Wire feed rolls Pressure regulator Manual Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Prsdpfozmduvjx Ahcsa Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), Year of construction: 2021, AUTOMATIC PALLET CHANGER Usable pallet dimensions mm2 x 650 x 400 Maximum permitted load on pallet kg2 x 250 TRAVELS AND FEEDS X axis mm 520 Y axis mm 400 Z axis mm 330 Rapid traverse X, Y mm/min 56,000 Rapid traverse Z mm/min 56,000 Working feedrate mm/min 1 ÷ 20,000 DIRECT DRIVE MOTOR SPINDLE Tool taper and shank BT30 Spindle speed rpm 12,000 Spindle motor power 30 min/continuous kW 7.5/5.5 Pedpfxoyiu Due Ahcora TOOL MAGAZINE Umbrella-type tool magazine capacity 24 Maximum tool diameter mm 80/100 Maximum tool length mm 200 Fixed position tool selection

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Psdpoykrtpsfx Ahcjra Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.