Used Welch Laboratory Vacuum System for sale (43,394)

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 500 liters Machine dimensions in cm: Length: 178 Fgjdouu Rkaepfx Albjg Width: 102 Height: 155 Electric power: 3 kW

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Fodpfxov Si Szs Albegg Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Cole Parmer vacuum furnace Cole Parmer vacuum furnaces are designed for drying under carefully controlled conditions - normal atmosphere, vacuum up to 30" Hg or inert gas atmosphere. The furnace enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. Fgjdpswxxgaofx Albsg All controls and connections (except the power supply) are located on the front in a vertical panel. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum. Fodox Aqa Dopfx Albsgg

Condition: excellent (used), functionality: fully functional, Strödter Vacuum Lifter on Rail System – New Price Includes 2x Strödter Zybomat ZP 60 adjustable vacuum lifters on Rollyx rail system. Manually movable. Line 01: 14,300 mm length Line 02: 7,370 mm length Both lines have a width of 6,000 mm Lifting capacity is adjustable depending on the setting. “Old price We have a total of 2x of these vacuum lines for sale at €35,000 each. (The lines have already been dismantled and are ready for transport). There are also 2x separate vacuum lifters for sale at €6,800 each.” Fgedpfxjxwwh Rj Albeg “Old price One deal for all 2 lines and 2 extra vacuum lifters: €75,000 best price, available only for the complete set of the 2 lines and 2 extra vacuum lifters.” —- Please note: new price for all: €50,000 excl. VAT. —- Prices are excl. VAT, excl. loading with forklift (€250 per loading), and excl. transport. The YouTube clips: These are example videos, not exactly the same but the same brand.

Year of construction: 2008, condition: good (used), Centralized dust, fume, and solid pollutant extraction system for industrial facilities. The VAC unit is an ideal choice for a high vacuum system for welding fume extraction and dust removal from grinding and polishing processes. Fodpfxspug Dpo Albjgg Capacity: 1,500 m³/h at 20,000 Pa vacuum Max vacuum: 22,000 Pa Inlet diameter: 135 mm Motor power: 22 kW Includes FlexFilter DX filtration unit with ATEX explosion relief panel (the panel discharges pressure in the event of an explosion). Separation efficiency: approx. 99.95% (fine dust) Additional cartridge filters on the clean air outlet. Noise silencer. The device is equipped with a new set of filter bags.

Condition: good (used), Year of construction: 2014, operating hours: 8,000 h, functionality: fully functional, overall weight: 1,600 kg, total length: 1,800 mm, total width: 800 mm, total height: 2,150 mm, Becker Variair Central System VACS 0040 0030 ll Performance / power 24Kw 3 x vacuum pump Becker VTLF 2.250 Fsdpfx Aovzh Umjlbjgg Inlet capacity each pump: 244 m3/h, Together: 732m3/h Max Vacuum each pump: 200 mbar

Condition: excellent (used), functionality: fully functional, Handtmann VF 830, AL-System 228-01, 242-16 Vacuum Filler with AL Hanging and Linking System Vacuum filler VF 830 with AL-System 228-01 for linking/hanging as well as hanging unit 242-16. The set is designed for fully automated production of meat products, particularly sausages in natural, collagen, and artificial casings. These machines deliver high portioning accuracy, productivity, and reliability in continuous operation. 1. Handtmann VF 830 Vacuum Filler Manufacturer: Handtmann Model: VF 830 Serial number: 38725 Year of manufacture: 2016 Power: 6.0 kW Power supply: 200–260 V / 17.3 A 380–440 V / 9.1 A 480–575 V / 7.2 A Frequency: 50/60 Hz Fgjdexyrczopfx Albog The VF 830 is a high-quality vacuum filler designed for the precise dosing of meat mixtures and other food masses. It ensures consistent portioning and a high degree of product repeatability. 2. AL-System – Handtmann AL-System 228-01 Manufacturer: Handtmann Model: 228-01 Code: 40287 Serial number: 16800980 Year of manufacture: 2017 Power: 5.5 kW Power supply: 400 V / 3~ Current: 8.3 A Frequency: 50 Hz Weight: 655 kg The AL (Automatic Line) system handles automatic twisting, separating, and portioning of sausages in a process integrated with the vacuum filler. It provides high performance and precision in linking, and supports operation with various casing types. 3. Hanging Unit – Aufhängeeinheit 242-16 Manufacturer: Handtmann Model: 242-16 Code: 38774 Serial number: 10903245 Year of manufacture: 2016 The 242-16 hanging unit enables automatic hanging of sausage loops onto rods in the production line. It ensures reliable, high-speed operation and full integration with the AL system.

Condition: good (used), functionality: fully functional, Year of construction: 2014, Crane system with electric crane trolley, chain hoist, and vacuum device – complete. Crane rails GISKB II, length 9 meters Crane bridge HEA120, length 4400 mm Electric crane trolley GIS Chain hoist GIS GP500/1, 0.5 t, hook height approx. 5 m Vacuum device DEVO-Tech, D-TB-300.03, payload 300 kg Fgodpfxjxp Nyce Albog Dismantled

Condition: ready for operation (used), functionality: fully functional, total length: 14,300 mm, total width: 6,000 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 23.12.2025! Offer includes rail system with vacuum lifting devices and lifting beams! MACHINE DETAILS Fedpfjx Dinisx Albjgg Length: 14,300 mm Width: 6,000 mm EQUIPMENT Adjustable load capacity 3x Strödter Zybomat ZP 60 adjustable vacuum lifters 2x lifting beams Manual shifting possible

Condition: used, This listing is for a Tecan SPE Te-VacS-B Vacuum System. The unit is in full working condition and is ready for immediate release. The Tecan SPE Te-VacS-B is an advanced vacuum regulation module designed to streamline and automate cartridge-based filtration and SPE processes, enhancing laboratory efficiency and accuracy. Key Features: Automation: The system automates the entire process of cartridge-based filtration and SPE, reducing manual intervention and improving reproducibility. Software-Controlled Vacuum Regulation: Provides precise control over the vacuum levels through user-friendly software, allowing for adjustments tailored to specific applications or samples. Compatibility with Tecan Platforms: Designed to seamlessly integrate with Tecan pipetting platforms, enhancing existing workflows within the Tecan ecosystem. Versatile Integration: Offers enhanced flexibility by being compatible with non-Tecan vacuum separation manifolds, external vacuum pumps, or house vacuum systems, making it adaptable to various laboratory setups. Dual Vacuum Positions: Equipped with two separate vacuum positions and distinct vent lines for each channel, effectively preventing aerosol cross-contamination between samples, which is critical for maintaining sample integrity. Benefits: Fedpfx Ajxxy Sbjlbegg Increased Efficiency: Automating the SPE processes decreases the time and effort required for sample preparation, allowing researchers to focus on data analysis rather than manual tasks. Enhanced Reproducibility: With software control and precise vacuum regulation, the system ensures consistent performance across multiple runs, vital for high-quality results. Flexible Implementation: The ability to work with various vacuum sources and platforms makes it a versatile addition to any laboratory, accommodating different workflows and instruments.

Condition: used, Rotary vane vacuum pump Manufacturer: Leybold Type: Trivac D25 BCS Cat. No.: 11879 Suction capacity: 25 m³/h Ultimate pressure: approx. 0.005 mbar Fsdpebqnhgofx Albjgg Motor: 400V AC Please send us your pump requirements as an inquiry.

Condition: used, AZO vacuum system with dosing screw Screw type: DFS 155x550 NE320 A22R Separator type: PKS 320-50 M A23R Year of manufacture: 2004 Equipped with quick cleaning system on dosing screw Equipped with various pneumatic valves and accessories for vacuum conveying See our other listings VMA Wekerom Fgsdeygh Emspfx Albsg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PRTC-1500C, total length: 2,800 mm, total width: 1,050 mm, total height: 1,650 mm, warranty duration: 12 months, overall weight: 950 kg, input voltage: 380 V, power: 6 kW (8.16 HP), 45 m³ vacuum pump Fsdpfx Ajydlk Uslbsgg 2 HP cooling system KR373 geared motor 7'' HNC operator panel PLC control Complete stainless steel housing 1050x2800x1650 mm 950 kg

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. Fgodpfxou D Arie Albeg The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: ready for operation (used), functionality: fully functional, total length: 7,370 mm, total width: 6,000 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 23.12.2025! The offer consists of a rail system with vacuum lifting devices and lifting beams! MACHINE DETAILS Length: 7,370 mm Width: 6,000 mm EQUIPMENT Adjustable load capacity 3x Strödter Zybomat ZP 60 adjustable vacuum lifters 2x lifting beams Manual displacement possible Note: The image of the assembled rail system is for illustration purposes only and shows a system with different dimensions. The system offered here has already been disassembled (see photos). Fodpfx Aex Dipyslbsgg

Condition: good (used), AZO vacuum pneumatic conveying system Pneumatic conveying systems for granular, powdery, and lumpy bulk materials Vacuum filter hopper with DMN150 dosing airlock Separator with DMN200 dosing airlock Vacuum pump 3kW 2860 rpm -260 270 mbar Fgsdpowyfyiefx Albsg Pipework 50mm and 80mm See our other listings VMA Wekerom

Condition: excellent (used), functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, VITO XS Vacuum Filtration System The ideal frying oil management solution for commercial kitchens and bakeries The VITO XS frying oil filter is the perfect solution for businesses with larger fryers. With its 40-liter tank and unique vacuum filtration system, it enables efficient and hygienic handling of frying oil in your kitchen. All benefits at a glance: Save up to 50% on frying oil Ensure optimal oil quality Reduce labor Ensure maximum safety in the workplace A sustainable solution Digital monitoring via VITOconnect Easy and hygienic transport in the kitchen The X-Series operates according to a simple principle with a focus on oil conservation and safety: The device creates a vacuum and draws the used frying oil through a hose into a closed tank. Since the hot oil is not drained, a safe working environment is created around the fryer. During this innovative oil removal process, the frying medium is passed through an environmentally friendly filter pad. This ensures very fine microfiltration without the use of chemicals or additives. By removing the finest food residue and carbon particles, oil savings of up to 50% are achieved. After emptying, the fryer can be thoroughly cleaned while the oil is stored in the VITO X filter system. After the filtration process, the frying medium is pumped back. The result? Clean oil for a delicious fried product and a satisfied, satisfied customer. Technical Specifications Normal Use: Ideal for restaurants and bakeries or high frying volumes Filter capacity: up to 30 l/min (66 lbs/min) Filtration efficiency: up to 5 µm / 200 µin Pump capacity: up to 35 l/min (77 lbs/min) Tank volume: 40 l / 73 lbs Particle capacity: 10.7 kg Weight: 45 kg / 99 lbs Temperature: max. 200°C / 392°F Material: 1.4301 stainless steel Electrical connection: 1N/PE / 220 - 240 volts / 50 Hz - 60 Hz External dimensions W x D x H: 553 mm x 551 mm x 679.50 mm Lance available optionally (not included) Fgodpov Hz Svjfx Albog Financing through our bank is also possible. komplett-konzept.leasingo.de Other items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Fgedpfx Aex R D Efolbeg Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 2006, operating hours: 18,625 h, machine/vehicle number: LC598, Used aseptic line for tretra pack fino 1 L - 3600 PPHTechnical Specifications & Performance DataThis complete Tetra Fino Aseptic line is an integrated aseptic packaging solution engineered by Tetra Pak for liquid food applications. The core filling machine was manufactured in 2006 and is complemented by downstream packaging equipment. Designed for industrial packaging and beverage production, it provides reliable second hand performance with hygienic processing and efficient material handling.Production speed: up to 3,600 packages/hourContainer type: Carton-based aseptic packages (Tetra Fino Aseptic family)Supported volumes: 1.0LPrimary product currently run: MilkMain filler year: 2006Additional module: SOCO System unit, year 2014Accessories: Trolley for packing with roll holder, ABC valve, 1 m mesh conveyorAdvanced Automation & Control SystemsThe line incorporates an industrial control panel for central operation of filling and downstream handling. The aseptic filler integrates automatic process sequences for sterilization, filling, and sealing under controlled conditions. Operator safety interlocks and machine guarding support safe operation, while standardized HMI navigation streamlines recipe selection and format changes. The architecture is designed for fast restarts and consistent uptime in high-demand environments.Production Line Integration CapabilitiesThis used bottling line is configured for inline operation, linking the aseptic filler with conveyors and a SOCO System packaging module. It supports integration with typical ancillary devices such as product dispensers, cap or straw applicators, and end-of-line packaging machinery. Format changeovers accommodate multiple carton volumes within the 0.2L to 1.0L range, enabling multi-product flexibility for milk and juice production. The conveyor layout ensures smooth product transfers and balanced accumulation between stations.Machine Condition & Maintenance HistoryThe equipment is reported in production with overall good condition. Continuous operation on milk indicates stable performance and consistent hygiene compliance. The 2006 filler and 2014 downstream module are maintained to sustain aseptic integrity and packaging quality, making this second hand industrial packaging line a strong candidate for rapid redeployment.Operational Performance & VersatilityOptimized for liquid food, the line supports aseptic packaging of products such as milk and juices in pillow-style Tetra Fino Aseptic formats. Key benefits include extended ambient shelf life without preservatives, high barrier multi-layer materials, and hermetic sealing. The layout offers reliable filling accuracy, gentle product handling, and quality consistency suitable for beverage production requiring long shelf life and stable logistics.Installation Requirements & Site PreparationThe system is designed for standard industrial facility layouts with room for filler, conveyors, and a compact end-of-line module. Typical utilities include electrical power, compressed air, and process water as required by aseptic operations. A clean, controlled environme... Fjdpfsyh E Apjx Albegg

Condition: new, table length 1000 mm table width 1000 mm table height 200 mm bore 28 mm weight 400 kg Special item - Material thickness varies; can only be clamped with bolts 280536 or 280532. Not compatible with quick-release bolts Features: - 4 legs - Standard configuration 650 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panels made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 28 mm - Holes arranged in a diagonal grid on the surface - Corners, edges, and holes are rounded - Side panel height: 200 mm - Holes in the side panel arranged in a diagonal grid Fgsdpfx Aszzd U Sjlbeg - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise setups

Condition: reconditioned (used), Year of construction: 2019, overall weight: 5,000 kg, power: 50 kW (67.98 HP), output voltage: 380 V, output frequency: 50 Hz, total length: 5,000 mm, total width: 4,000 mm, type of cooling: water, We offer this reconditioned HCVAC vacuum company JPZ-1400 PVD coating machine, year of construction 2019. If you have any questions or need more information, feel free to send us a message or give us a call. Fgjdpozw U N Sjfx Albjg

Condition: used, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,250 mm, loading space width: 2,450 mm, total length: 11,700 mm, total height: 1,600 mm, color: other, Year of construction: 2013, = Additional options and accessories = - Steering Axle = More information = Axle configuration Rear axle 1: Lift axle Rear axle 2: Steering Weights Empty weight: 8.000 kg Fgodpfx Ajyzt Sislbjg Carrying capacity: 34.000 kg GVW: 42.000 kg Functional Height of cargo floor: 160 cm Condition General condition: average Technical condition: average Visual appearance: average Identification Registration number: QAQU503 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track, lightweight roller conveyor -Manufacturer: Soco System, non-driven roller curve conveyor, height-adjustable -Height: max. 710 mm -Rollers: Ø 48 x 15 mm -Quantity: 1x roller conveyor available -Price: per piece -Transport dimensions: 1470/600/H510 mm -Weight: 23 kg/pc. Fgodpeyw Hwkjfx Albjg

Year of construction: 2024, condition: new, The OASI.S (Open Automation Systems Integrator Server) robotic material handling system for the automatic loading and unloading of IV bags and trays. This system is designed to transport filled IV bags from the cleanroom, load and position IV bags into trays using a pick-and-place robot, stack trays on a pallet, and move pallets of empty trays to and from cells. The system consists of connecting conveyors, a clean station with a delta robot, a robotic loading station (delta robot and 4-axis robot), and an unloading station (2 x 4-axis robots). The line includes: - 3 x FANUC M-410iC/315 robots, serial numbers: R24500486, R24500487, R24500488, manufactured in 2024 - FANUC M-3iA/6S delta robot, serial number R244001FB, manufactured in 2024 - FANUC M-2iA/3SL delta robot, serial number R2430075E, manufactured in 2024 The individual robot cells are equipped with dedicated grippers, four Buuusch MM 1104 B V03 TNXX pumps, conveyor feeders, additional electrical cabinets, and many other accessories. Fgedpfx Alozx Aldsbog