Used Veb-Halle Mah 5000 for sale (4,618)

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220-380 - 50 V / Hz Kodpfsu Ngwmsx Ahbodu revolution per minute: 2750 U/min total power requirement: 900 Watt weight: 87 kg dimensions L x W x H: 0,32 x 0,56 x 1,0 m Double sanding block with handrail, adjustable no grinding protection guard Use max. sanding discs Ø 200mm max. sanding disc thickness 32mm Grinding wheels currently clamped: left = Ø 180 x 24mm and right = Ø 150 x 31mm *

Condition: used, Technical details: grinding wheel diameter: 200 mm revolution per minute: 2750 U/min total power requirement: 700 Watt current: 220 / 380 A weight: 70 kg dimensions L x W x H: 0,4 x 0,46 x 1,22 m Double sanding block, table-top unit mounted on stand with handrail on both sides, adjustable/swiveling Kjdpfx Asu Ngviehbedu Sanding guard on both sides Use max. sanding discs Ø 200mm max. sanding disc thickness 30mm sanding disc currently clamped on sanding block: left=Ø 160 x 30mm and right=Ø 160 x 22.5mm Connections for dust extraction on both sides Ø 35mm *

Condition: good (used), Year of construction: 1978, Offer 26129 Technical data: - Max. load capacity approx. 250 kg - Drum dimensions approx. W 450 x D 600 mm - Drum capacity approx. 80 l - Drum opening with cover lid - Inside of the drum is rubberized - 2 speeds - Motorized tilting of the drum Kdsdpfez Erbfsx Ahbou - Drive 400 V / 2.3 kW - Space requirement approx. W 1000 x H 1800 x D 1600 mm - Weight approx. 500 kg

Year of construction: 1989, condition: used, Technical details: Pressure max.: 30 MPa volume flow rate: 70 cbm/min. electrics - voltage/frequency: 380 / 3Ph ~ V/Hz tank capacity: 50 dm³ l machine weight approx.: 120 kg connected load: 0,62 kW dimensions L x W x H: 0,7 x Ø 600 x 1,3 m Application: Pressing grease into grease nipples Size of grease reservoir: 460 x 620mm Size of the press Ø 345 x 540mm Connection via bayonet mount Handling/operation with hand gun and 3.8 metre hose with ON/OFF switch The grease gun is mobile, equipped with handrail with two-hand grip and 220 V socket. * Ksdpfx Aju Nft Hehbedu

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Kdedpfjy D Rk Iox Ahbeu Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: used, * Single Facer Kodpfxoztng No Ahbjdu * Width 2050 mm * New adhesive and grid walls * New corrugated rollers from Friese * New steam heads * New condensate valves * Overhead line bridge also available

Condition: used, Year of construction: 1977, Technical details: Kdjdpeu Nguxofx Ahbsu grinding wheel diameter: 200 mm revolution per minute: 3000 U/min with handrail: verschiebbar 30mm current type: 220V / 380V total power requirement: 900 Watt weight: 149 kg dimensions L x W x H: 0,4 x 0,5 x 1,2 m Double grinding block Main switch - On/off switch Connection for dust extraction Currently attached grinding wheels: Ø 140 x 25 and Ø 150 x 25 mm *

Condition: used, Year of construction: 2006, functionality: fully functional, total length: 6,150 mm, total width: 2,470 mm, total height: 2,065 mm, overall weight: 13,000 kg, input voltage: 400 V, Equipment: emergency stop, # STADLER STT 5000 Ballistic Separator – Year of Manufacture 2006 – Shafts Replaced in 2025 For sale is a regularly maintained and well-kept ballistic separator from the manufacturer STADLER, type STT 5000, year of manufacture 2006, from our existing commercial waste sorting plant. The machine was used for the mechanical separation of different waste and recyclable material fractions and was permanently integrated into our stationary sorting line. ### Technical Data - Manufacturer: STADLER - Type: STT 5000 - Year of Manufacture: 2006 - Overall Length: approx. 6,150 mm Kdodpfx Aoz R Sfwohbou - Overall Width incl. Motor: approx. 2,470 mm - Overall Height: approx. 2,065 mm - Overall Weight: approx. 13,000 kg - Number of Paddles: 6 - Paddle Length: 5,050 mm - Motor Power: 11 kW - Design Capacity: 12 t/h - Design Volume Flow: 80 m³/h ### Maintenance and Repair The ballistic separator was regularly and carefully maintained throughout its service life. Necessary repairs and the replacement of wear parts were carried out continuously. Major maintenance measures: - December 2025: All shafts of the ballistic separator were completely replaced. The investment costs amounted to approximately €80,000. A corresponding invoice is available. - 2024: All paddles were replaced. The machine is equipped with paddle coverings made of sheet metal. - Regular Maintenance: The screen segments with a grain size of 50 mm are replaced regularly. These extensive measures ensured continuous investment in the maintenance and preservation of the machine. Corresponding invoices and maintenance records can be provided upon request. ### Sale Due to Plant Modernization The sale is taking place due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation and records of the maintenance work carried out can be provided upon request. Price on request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt Kdedpfx Ahsu Ngu Ssbeu weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 *

Condition: used, Year of construction: 1986, Technical details: sheet width: 650 mm coil weight: ca. 2 t coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Kdodpfxeu Icguo Ahbju Machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 2016, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 32 A, The RISCO RS 5000 filling machine has been unused for a year but was fully functional until then. It requires a technical inspection. Kjdpez Hixwjfx Ahbodu

Condition: used, Technical details: max. dia. of grinding wheel: 175 mm Kdsdpfx Aeu Ngtbohbju revolution per minute: 2750 m/sec. boring diameter: 20 mm number of stations: 2 Stück total power requirement: 0,4 kW weight: 15,4 kg space requirements of the machine approx.: L:380xB:252xH:270 mm technical data: - 4 holes Dm= 10mm are available at the base for mounting on the worktable. - VEM CS 175 motor with 220/380V-50Hz; (1,9&1,1A) Protection class P33, - connector plug CEE 16 Equipment: - with grinding surface and grinding protection on both sides On sale as is!, without test run! *

Year of construction: 2023, operating hours: 50 h, condition: like new (used), functionality: fully functional, Mushroom cultivation hall, dimensions 36 x 8 x 3.5 m, galvanized metal frame, mineral wool insulation, ventilation system, cooling panels, humidification system, shelving. Kodpfx Ahjz Tdz Usbodu Self-dismantling and removal included.

Condition: excellent (used), IM Very good condition. Ksdpfszkvh Nex Ahbedu

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m Kdsdpfxeu Nfq Ej Ahbeu HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Kodpfszqfxdox Ahbodu

Condition: used, Trailers, construction machinery trailers, GRP body, trailer cover box, cover for emergency power generator, fiberglass hood -GRP construction: used as a cover for emergency power generator -Internal dimensions: 1600 x 1070 mm -Dimensions: 1780/1550/H900 mm Kdedpfx Ahoz Hvmzjbou -Weight: 55 kg

Condition: excellent (used), Magnet dimensions: 60 x 20 cm, working area: 22 x 65 cm Kodoy Ittgspfx Ahbedu

Condition: not inspected (used), Year of construction: 2003, Vertical CNC milling machine MORI SEIKI NV500A/50 (2003) at auction. MSG-501 control, X-axis travel 800 mm, table 1,100 x 600 mm, 30-tool magazine, spindle up to 8,000 rpm, machine weight approx. 6,700 kg. Used CNC mill Kdedpfxjz I Ebqo Ahbou

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW Kdodswqplkopfx Ahbeu weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: used, Technical details: saw blade diameter: 250 mm Kdjdpsu Nif Tjfx Ahbeu grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) *

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar Kjdpfx Ahsyt Hwzjbjdu • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size HSK 63

Condition: good (used), functionality: fully functional, PYE 160 S/1M hydraulic press. Kdsdpfx Aszdlrqohbsu

Condition: used, Year of construction: 2009, functionality: fully functional, Duplo 5000 PRO Booklet Maker Stitch/Fold/Trim with 2x Towers Year 2009 From a Ex Public sector Council Very low use, and low mileage. Has been on Service contract since new by Duplo UK Stitching heads 2 Collators (20 Bins) Video on request Collection from my warehouse in Reading Ksdpfx Ajz Idfhehbedu

Condition: excellent (used), Weight: 760 kg Throat depth: 68 cm Table length: 115 cm Kdedpfx Ahozkkr Aobju Table width: 70 cm Cutting height: 10 cm Angle adjustment Motor: 4 kW