Used Vacuum Dryer Wood Dryer for sale (10,809)

Condition: used, // Sold as is or reconditioned // Ncedpsx Rz Spjfx Alnsu Vacuum paddle dryer mixer Used for products such as powders/powdery substances. 316 stainless steel Tank diameter 1000 x 2000 Volume: 1100 litres Jacketed 86 litres / 1 bar - 120°C Heated agitator 235 litres / 1 bar - 120°C Agitation by 8 scraping blades Loading via 400 diameter Discharge 350 diameter with guillotine valves ADF 15 kW motor Self-cleaning filter

Condition: used, WSA Lignomat vacuum dryer Control unit: Bollmann Tromatic 910GH Depth approx. 10 m Njdpfsxxpdtsx Alnecu

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC Ncsdpfjwp Rqfsx Alnju • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Nedpfx Aloitcu Ejnocu Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 700 kg, total length: 2,860 mm, total width: 1,230 mm, construction height: 1,700 mm, Fully operational exhibition dryer, Ø 1090 mm We are offering our fully operational exhibition dryer with a diameter of 1090 mm. The unit is very compact and practical in terms of required space and easy relocation. Technical Details: Connection: only a water connection for spraying and a 16A power plug are required Heating system: 4 kW electric heater Wood moisture measurement at 3 measuring points Ncedpfxexbz Hro Alneu Plug-and-play design – ready for immediate use Advantages: Ideal for small carpentry workshops Easy to transport and flexible positioning

Condition: used, Year of construction: 1998, functionality: fully functional, 2 pieces vacuum drying oven GMP-compliant, Vötsch Industrietechnik (can also be sold individually). Material product-touched stainless steel 1.4435. Type of heating, externally heated hollow inserts, the ceiling is also heated, double-shelled with meander baffles inside, pressure-tight up to 3 bar. Heating via heating/cooling circuit (indirect heating using hot water) via separate DHW thermistats. Operating temperature max. 95°C, operating pressure inside tank 0 to 1 bar abs. Njdpfx Aljucdqnsnecu External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth Insert trays: 1200 mm width x 950 mm depth Number of shelves: 13 pieces Covered area: 14.8 m2 Weight approx. 2900 kg per dryer Connections: Hot water connection (flow and return) Vacuum connection Heating of the vacuum drying ovens by means of a heating medium, e.g. water, connections at the rear. Heating of the heating medium by means of temperature control unit with control type 95-36-E Nominal voltage 400 V 3/N PE AC, 50 Hz, heating capacity of the unit 36 kW, heating capacity can be reduced to 18 kW in a definable temperature range.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Nsdow Uf S Hepfx Alnocu

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Loading bunker Oversize vibrating screen Ncjdpfx Asxa Drholneu Chain conveyor to dryer Belt dryer Chain conveyors from dryer Vibration separator

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans Ncedjxc Eitopfx Alnju automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Njdsd Sm Diepfx Alnecu Max temperature: 700 C °

Condition: ready for operation (used), Year of construction: 2003, Wood Band Saw manufactured in 2003. This WOOD-MIZER LT40 features a fully hydraulic system and is powered by a 3-year-old Kohler petrol engine with 1100 hours of use. The total operating hours are 4300, and the saw was fully serviced in 2026, ensuring it is fully functional. If you are looking to get high-quality sawing capabilities, consider the WOOD-MIZER LT40 machine we have for sale. Contact us for further details. • Configuration: Fully hydraulic saw • Engine: Kohler petrol, 3-year-old, 1,100 engine hours • Total machine hours: 4,300 Ncsdpfx Aszg Epzjlnju • Service/Condition: Fully serviced in 2026; fully functional

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 300 Width: 180 Height: 200 Electric power: 7.5 kW Ncsdpfxeul T Ico Alneu

Year of construction: 2024, condition: used, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Ncodpezf N Ncofx Alnju Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: excellent (used), I sell the pump FEZER 016-118 94213 - Pump in bdb condition. Ncjdeud Ryrspfx Alnou - Capacity 16m3/H

Condition: excellent (used), Wood-Mizer HR700 horizontal band saw, Main motors: 2 x 15 kW, Ncodpezg T Dysfx Alneu Blade feed motor: 1.5 kW, Feed rollers: 3 x 0.12 kW, Max. cutting width: 400 mm, Max. cutting height: 370 mm, Guide wheel diameter: 600 mm, Pneumatic material clamping system, Adjustable feed rate via frequency inverter: 0-30 m/min, Hydraulic blade tensioning system, Manual height adjustment.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m - width: 8,8 m Nsdozg Iw Iepfx Alnjcu - total height: 5,2 m / usable height: 4,1 m Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Year of construction: 2005, condition: like new (used), functionality: fully functional, Wood Grip Power Suction Unit - Year of manufacture: 2005 - Weight: 500 kg - 4 arms - Own weight: 50 kg Ncsdpfx Aozg Ey Hjlnou - Battery-powered

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Ncodpovzub Hjfx Alnsu Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: sn: 1100056463, This is a miniature Büchi B-290 spray dryer (Mini Spray Dryer), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. Nodpfxezgw Tlo Alnecu This device is designed to provide consistent and accurate results with each use. Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, healthcare equipment and devices, the dental field, and industrial applications. It is a BÜCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, year 2021; this equipment is NEW. Take advantage of this opportunity to acquire this exceptional tool and benefit from its practicality and performance.

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Turbo molecular pump: Serial number: 14219214 YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Nodpfencd S Uex Alnscu Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: used, 11375, WSU 501 H, Ruvac Oerlikon Leybold Vacuum GmbH Roots vacuum pump Nodpfxoq S Tk He Alnocu Model: 11375 Type: WSU 501 H Condition: Used

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. Ncedsx Aqa Djpfx Alnou DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum.

Condition: excellent (used), functionality: fully functional, Model: TMBBB662005A Pump Model: TMB10662005A Pump Type: ADIXEN ATH2303M Controller Model: 123744 Controller Type: OBCV4 PROF IP54 Firmware: Vi 3.01.00 / Vv 1.08.02 / Vm 3.11 Nedpfxex Ap I To Alnjcu Year of Manufacture: 2018/2019 Operating Hours Pump: approx. 25,000 h

Condition: as good as new (ex-display), 844224V0004 + 400000250, COOLVAC 1500 / COOLVAC1500, Oerlikon Leybold vacuum cryopump - like new Ncodpfx Aljh Igffonju Model: 844224V0004 + 400000250 Type: COOLVAC 1500 Condition: Like new

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Nsdpfx Asvrzakolnscu Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.