Used Unbekannt Hydraulic Machine Vice Defective for sale (74,499)

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Hsdpfx Aeza D U Dobmofh Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, working width: 3,000 mm, type of crowning: manual, sheet thickness (max.): 6 mm, total length: 2,500 mm, total width: 4,500 mm, total height: 2,500 mm, Equipment: documentation/manual, emergency stop, Hydraulic pivoting bending machine Manufacturer: KRAMER, Type: AMautVIIhy3000 Year of manufacture: 1988 Technical data Manufacturer: KRAMER Type: AMautVIIhy3000 Year of manufacture: 1988 Usable length: 3030 mm Sheet thickness: 6 mm Stroke: approx. 300 mm Dimensions: approx. L x W x H 4.5 x 2.5 x 2.5 m Hodpfx Aboy T R Swjmofh Equipment: • Bending angle adjustment via potentiometer! • Controlled rear stop, 1000 mm • Segmented gooseneck tool • Bending rail + reinforcing rail • Manually adjustable crowning • Documentation All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized rear stop up to 1000 mm with fine adjustment via handwheel Crown angle adjustment Hfjdpfx Aboqmvlremoh knife sharpened operation manual Weight: approx. 1400 kg

Condition: used, functionality: fully functional, Professional pipe bending machine with hydraulic drive. Suitable for steel pipes, stainless steel, and possibly thick-walled copper pipes. INCLUDES a wooden crate with a comprehensive set of bending dies/bending segments (see photo) – this is what gives it its real value, as bending segments are very expensive when purchased new. Hsdpfezab Emex Abmjfh Ideal for heating engineers, plumbing companies, steel pipe construction, plant engineering, and training workshops. With the included set, various diameters can be bent directly. Technical data: - Type: hydraulic pipe bending machine, stationary unit - Drive: three-phase 400 V / hydraulic unit - Bending dies: comprehensive set available (wooden crate, see photo) - Construction: steel frame, mobile/stationary - Application area: typically pipe OD 20-60 mm (verify on-site) - Year of manufacture: approx. 1980s-1990s Collection/transport: Self-collection with a forklift. Loading on-site is possible. Shipping via freight forwarder on a pallet can be arranged.

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Hfsdpfxsyi Hrwe Abmjh Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Hodpslqadhefx Abmjfh Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm width without fence 800 mm weight approx. 750 kg good condition

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Hfeded Rmcmepfx Abmoh Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Technical data: - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm - Miter adjustable: 30° - 90° - 30° - at 45°: round 150 mm Hfjdpjy Uwpxjfx Abmsh - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm - Hydraulic material backstop clamping device - Micro-spray cooling system - Original infeed roller conveyor: 4000 mm - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg

Condition: good (used), Year of construction: 2019, operating hours: 1,404 h, machine/vehicle number: 397, Offer 26148 Technical data: - Pressing force 420 kN / 42 t - Stroke 0 - 300 mm - Stroke speed 0 - 0.6 m/min Hfodpfxjy Uwhbo Abmoh - Tool height 200 mm - Bending capacity - with MW 125 flat prism, approx. 200 x 16 mm - with MW 240 flat prism, approx. 200 x 24 mm - Pipe bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - for angle programming + length programming - controlled length stop 3000 mm - various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Hodporzfh Hofx Abmjfh Very good condition

Condition: used, Hydro-mechanical NC machine vice, VIS - HYDRAULIQUE\nPrecision machine vice, clamp\nType 20700\nYear of manufacture approx. 2000\nJaw width 150 mm\nJaw height 42 mm\nClamping range 0 to 250 mm\nMax. opening width 253 mm\nClamping force 6 tons\nGuideway height 51 mm\nGuideway length 450 mm\n- Hydro-mechanical machine vice\n- Quick adjustment with clamping ball lock in 8-position hole grid\n- Rigid base body, precision ground on all sides\n- Can be clamped horizontally, vertically, or laterally\n- Guideway with 19 mm guide slot\n- Additional set of prism jaws included\nDimensions (L x W x H): 480 x 150 x 107 mm\nWeight: 32 kg\nGood condition Hedpfx Aoy Sbxfobmofh

Condition: good (used), functionality: fully functional, HYDRAULIC GADE BENDING MACHINE 4000X50, RECESS 500, MANUAL REGISTER, DIMENSIONS: 460X175X255(H) cm, WEIGHT: 6,700 Kg Hsdpevxir Uofx Abmsfh

Condition: good (used), functionality: fully functional, HYDRAULIC GADE BENDING MACHINE 4000X120, RECESS 500, CONTROLLED X AND Y AXIS, DIMENSIONS: 440X200X280(H) cm, WEIGHT: 13,700 Kg Hfedpfx Aovxit Sobmsh

Condition: used, Hydraulic Schiavi folding machine 2500X50, motorized register, 400 recess. Dimensions: 290x150x200(h) cm, Weight 3800 Kg Hjdpfxjwn D N Ej Abmsfh

Condition: excellent (used), Year of construction: 2010, Technical data: Working width: 6500 mm Maximum bending capacity: 10.0 mm Maximum bending angle: 7.0 mm CNC control Diameter of upper roller: 420 mm Diameter of side rollers: 315 mm Diameter of central lower roller: 400 mm Conical bending unit by angling the two side rollers Mobile control panel with digital display Hydraulic folding supports CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 39 tons Optional equipment: Side bending aid Hfodpfxox Iitio Abmeh Swiveling bending aid on top Condition: Very good condition, little used Operating hours: 100 hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2016, Four-roll hydraulic CNC sheet metal bending machine. The machine is designed for bending sheet metal and manufacturing cylindrical or conical parts. Thanks to its four-roll design, it enables precise pre-bending and bending in a single working cycle. Suitable for mechanical engineering production, steel structures, tanks, pipe components, and other heavy-duty sheet metal applications. Technical specifications: Manufacturer: Durma / Durmazlar Model: HRB-4 2535 Year of manufacture: 2016 Type: Four-roll hydraulic sheet metal bending machine with CNC control Max. sheet thickness: 35 mm Working width: approx. 2,560 mm Machine length: 5,010 mm Machine width: 2,060 mm Machine height: 2,050 mm Machine weight: 20,300 kg Motor power: 37.4 kW Voltage: 400 V / 50 Hz Serial number: 683316002 Equipment and accessories: CNC control Hfsdpfx Aey Sz Erobmjh Hydraulic roll adjustment Side support Top support Feeding table / supporting roller guide Documentation / operating manual The machine is connected and can be tested by arrangement.

Condition: used, functionality: fully functional, LOT OF MACHINE VISES Hjdox A El Ijpfx Abmjfh

Condition: new, Year of construction: 2026, Conventional, NC- or CNC-controlled hydraulic press brake / folding machine Maximum bending length: 2,500 mm Maximum bending capacity: - Steel sheet DC01-A with a tensile strength of approx. 350 N/mm² or material S235JR – 4 mm - Stainless steel sheet 304L – 2.5 mm - Aluminum sheet H24, tensile strength approx. 145 N/mm² – 5.5 mm - Zinc sheet according to DIN EN988, tensile strength approx. 190 N/mm² – 4.5 mm Upper beam stroke up to 110 mm Maximum bending angle: 135° Various back gauge options available: - Manual back gauge with 650 mm travel - NC-controlled back gauge with brush table or Hfodjy Stwajpfx Abmoh - NC-controlled back gauge with sheet supports and ball rollers Each with an adjustment range up to 1,470 mm Drive power: 5.5 kW Dimensions without back gauge: approx. 3.5 x 1.7 m x height 1.7 m Weight without oil filling: approx. 4,300 kg

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, foot remote control, CRONOSSTECH PKH 160 Profile Bending Machine The CRONOSSTECH PKH 160 model offers maximum efficiency in heavy-duty profile bending applications thanks to its robust construction and powerful hydraulic system. All three rolls are driven, enabling stable and precise bending without slippage. Key Advantages - Three rolls driven by hydraulic motors - High-strength, durable construction - Horizontal and vertical operating capability - Digital displays for precise bending - Heavy-duty industrial application Areas of Use - Steel construction fabrication - Tube and profile bending applications - Machinery and equipment manufacturing - Shipyard and marine industry - Automotive and auxiliary industries Standard Features - Welded steel frame construction - Three rolls driven by hydraulic motors and planetary gearboxes (individual planetary gear for each roll) - Hardened and ground shafts made from special high-strength materials - Hardened standard rolls - Mobile and independent control panel - Horizontal and vertical working positions - Dual-speed operating system - Digital displays (2 units) - Three-way hydraulic side supports Optional Features - Special rolls, bending and reducing tools - NC control system Hfodpfsy Hgwiox Abmsh Technical Specifications – PKH 160 - Roll diameter: Ø160 mm - Roll bearing diameter: Ø500 mm - Working speed: 3 – 6 m/min - Motor power: 22 kW - Machine length: 2500 mm - Machine width: 2350 mm - Machine height: 2600 mm - Weight: 10,700 kg Production Note: This machine is manufactured by CRONOSSTECH in Turkey. It is designed in line with high-quality standards and is suitable for industrial use.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends Hfjdpsxw D Udefx Abmjh - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Hedpew Slctjfx Abmefh Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 5 kW (6.80 HP), STANDARD EQUIPMENT Welded steel construction body Three rollers with motor drive Shafts hardened and ground from special high-strength material Horizontal and vertical working position Hardened standard rolls Movable control panel separated from the main body Manually adjustable mechanical side supports movable in 3 directions Precision bending with braked motor Two digital indicators OPTIONAL EQUIPMENT Rolls for bending pipes and profiles Optional 2-axis hydraulic side supports Automation via NC control TECHNICAL SPECIFICATIONS Upper shaft diameter: 80 mm Lower shaft diameter: 70 mm Roll diameter: 245 mm Working speed: 7 m/min Motor power: 4.75 kW Length: 1500 mm Hfedow Smibspfx Abmsh Width: 1000 mm Height: 1400 mm Weight: 1645 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 8 kW (10.88 HP), STANDARD EQUIPMENT Welded steel construction body Hjdpfx Abow Smi Iomefh Three-roll drive by motor Shafts made from special high-strength, hardened, and ground material Horizontal and vertical working positions Hardened standard roll sets Movable control panel separate from the body Manually adjustable mechanical side guides with 3-way movement Precise bending with motor brake Digital displays (2 units) OPTIONAL EQUIPMENT Pipe and profile bending roll sets Optional 2-axis hydraulic side guides Automation with NC control TECHNICAL SPECIFICATIONS Roll Shaft Diameter: 100 mm Roll Diameter: 315 mm Working Speed: 7 m/min Motor Power: 7.5 kW Length: 2000 mm Width: 1450 mm Height: 1700 mm Weight: 3650 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head Hsdpfx Absw Slcgsmofh - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 4 kW (5.44 HP), STANDARD EQUIPMENT Welded steel construction body Three-rolls driven by motors Hardened and ground shafts made from special high-strength material Horizontal and vertical working positions Hardened standard rolls Movable control panel separate from machine body Three-way adjustable mechanical manual side supports Precise bending with braked motor Digital displays (2 units) OPTIONAL EQUIPMENT Rolls for pipe and profile bending Optional two-axis hydraulic side supports Automation with NC control TECHNICAL SPECIFICATIONS Upper Shaft Diameter: 60 mm Lower Shaft Construction: 50 mm Hfedpfx Asw Smhwobmoh Roll Diameter: 180 mm Working Speed: 6 m/min Motor Power: 3.75 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg