Used Tunnel Basket Washer for sale (3,385)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Lasdpfxjfz Ax So Abzjg The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Lodpfjfz A D Nsx Abzsag

Condition: excellent (used), J4 tunnel oven from year 2012, disassembled and ready for shipment. For more information, please send an email. Ljdpfx Abjw Elytjzsag

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Lasdexpxyrspfx Abzsg Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Laedpoxp Urdsfx Abzeg Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: excellent (used), functionality: fully functional, total height: 2,175 mm, total length: 13,670 mm, total width: 2,050 mm, The CES CO2 cryogenic tunnel is a high-performance solution for rapid product freezing in industrial environments. Thanks to its use of carbon dioxide, this tunnel provides rapid, efficient cooling, ensuring that food quality and properties are preserved. In fact, it is designed to guarantee uniform freezing while reducing moisture loss. What's more, the CO2 CES cryogenic tunnel stands out for its ability to handle large volumes of product, making it an ideal choice for large-scale operations. What's more, it offers flexibility of use, adapting to a variety of product types while ensuring a continuous workflow. Thanks to its cutting-edge technology, it enhances productivity while reducing energy costs, optimizing freezing processes in the food industry. In short, this machine represents a reliable and efficient solution to the demands of industries requiring rapid freezing, while guaranteeing rigorous compliance with quality and safety standards. Technical specifications Cooling Lodpfxju Iu U Ds Abzoag Dimensions: 13670 x 2050 x 2175 mm (L x W x H) Usable dimensions: 11960 x 1201 (L x W)

Condition: as good as new (ex-display), Year of construction: 2018, Shrink tunnel Manufacturer: Diez Type: HTC 5030 D Year of manufacture: 2018 Lajdpfx Abezh Nxcezsg Belt width: 50 cm Length: 220 cm Passage height: 28 cm New No operating hours ä22926

Condition: good (used), Year of construction: 2016, High-pressure cleaner, hot water high-pressure cleaner -Manufacturer: Ehrle, Hot water high-pressure cleaner -Type: HD 1140 Electronic II Lodpfsz Duf Rsx Abzsag -Operating pressure: 30-230 bar -Spray flow rate: 16 l/min / Steam setting: 7 l/min -Hot water output: 30-98°C / Steam setting: 150°C -Power connection: 3/PE/AC/50Hz/400V -Cleaning agent: High-pressure jet application and quantity control -Dimensions: 1200/800/H1000 mm -Weight: 225 kg

Condition: used, Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp Lsdsz Dtyyspfx Abzoag - Year of manufacture estimated to be around 2000. Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - Equipped with 2 UV lamps - The year of manufacture is estimated to be around 2000. Lsdpfoz Dtytjx Abzeag Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Ledpfjxpww Aex Abzsag Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,397 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Steering angle: ± 40° Fuel tank capacity: 540 l Hydraulic tank capacity: 550 l Tyre size front/rear: 18.00 - 25 Axle load front/rear loaded: 29,400 / 11,600 kg Max. tractive force: 248 kN Engine: Cummins QSL9 Max. power: 209 kW/2000 rpm Max. permitted cross slope: 15% Max. permitted gradient: 28% Turning radius outer/inner: 6,713 / 3,547 mm Bucket capacity (SAE, heaped): 5.4 m³ Maximum speed loaded forward / reverse on level ground: 25.0 km/h Exhaust system: Silencer / Catalytic converter Main dimensions: 9,715 x 2,600 x 2,450 mm (LxWxH) Lodpfxeytpxhs Abzjag Axle load front/rear unloaded: 13,100 / 16,900 kg Operating weight: 30,000 kg Payload: 11,000 kg

Condition: used, functionality: limited functionality, power: 168 kW (228.42 HP), gearing type: automatic, fuel type: diesel, color: yellow, empty load weight: 20,650 kg, maximum load weight: 6,000 kg, Year of construction: 2023, Operation: Radio remote control Fire suppression system: Ansul Width: 2,335 mm Height with bucket raised: 4,400 mm Length, standard machine: 8,945 mm Lasdpfeytcy Eox Abzsg Height with bucket lowered: 2,235 mm Engine power: 168 kW / 225 HP Engine: Cummins B6.7, EPA Tier 4F/EU Stage V Tipping force, mechanical: 12,500 kg Breakout force, hydraulic: 13,400 kg Handling capacity, standard bucket: 6,000 kg Operating weight (empty): 20,650 kg Axle load front/rear: 8,910 / 11,750 kg

Condition: excellent (used), functionality: fully functional, power: 144 kW (195.79 HP), gearing type: hydrostat, fuel type: diesel, empty load weight: 19,300 kg, maximum load weight: 6,800 kg, tire size: 17,5 R 25, Year of construction: 2023, operating hours: 4,092 h, Automation: Telematic system for Wi-Fi/LTE Remote control: Prepared Bucket width: 2,230 mm Fire suppression system: Ansul Checkfire 210D Cab: ISO ROPS/FOPS Lsdpezcchuofx Abzsag Engine power: 144 kW / 193 hp Engine: Cummins QSB6.7 EPA Tier 3 / EU Stage IIIA Length of standard machine: 8,705 mm Height with bucket lowered: 1,903 mm Height with bucket raised: 4,298 mm Tipping force, hydraulic: 13,350 kg Tire size: 17.5 R 25 Tipping force, mechanical: 11,700 kg Payload capacity, standard bucket: 6,800 kg Axle load, front/rear: 8,600 / 10,700 kg Weight of empty machine: 19,300 kg

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,138 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Steering angle: + - 40° Fuel tank capacity: 540 l Hydraulic tank capacity: 550 l Tire size front / rear wheel: 18.00 - 25 Axle load front / rear axle loaded: 29,400 / 11,600 kg Max. tractive force: 248 kN Drive motor: Cummins QSL9 Max. power: 209 kW/2000 rpm Max. permissible cross slope: 15% Max. permissible gradient: 28% Turning circle outside / inside: 6,713 / 3547 mm Bucket capacity (SAE, piled): 5.4 m³ Maximum speed loaded forward / backward on flat ground: 25.0 km/h Exhaust system: Silencer / catalytic converter Main dimensions: 9,715 x 2,600 x 2450 mm (LxWxH) Front / rear axle load unloaded: 13,100 / 16,900 kg Lsdpfevrd Epsx Abzsag Own weight: 30,000 kg Payload: 11,000 kg

Year of construction: 2008, condition: used, UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Working width: 1300 mm - Feed rate: 5 m/min Laedpfjz A S Itjx Abzjg - Control range: 2-10 m/min - Working height: 920 + 20 mm - Special pass-through height in UV operation: 150 mm - Pass-through height without UV operation: 200 mm - Workpiece dimensions: 300 x 50 x 10 to 2600 x 1300 x 150 mm - Coating media: Water-based and solvent-based coatings, UV clear coats and pigmented coatings - Infeed conveyor belt - 4 UV drying lamps (1 bottom, 3 top) - Mounted on 2 belt conveyors from Venjakob Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, pressure: 250 bar, input voltage: 400 V, overall weight: 79 kg, The GT 15/250 is a professional high-pressure washer designed for prolonged, intensive use in demanding environments. Combining high operating pressure, high water flow, and robust industrial construction, it is ideally suited for car washes, workshops, industrial plants, detailing businesses, agriculture, and the construction sector. The pump housings are made of anodized aluminum, ensuring resistance to corrosion and mechanical damage. Internal components, such as ceramic plungers, offer low friction and a long service life. The brass pump head is resistant to high pressure and temperatures, while the stainless steel suction and discharge valves withstand wear and contaminants. Equipped with a pressure regulation valve and a thermal safety valve, the brass pump ensures the unit's durability even under heavy loads. Key advantages of the TECHKAR GT 15/250 pressure washer: · Very high pressure of 250 bar (3600 PSI) – effective removal of even the most stubborn dirt · High water flow rate of 15.5 l/min (4.1 GPM) – faster and more thorough cleaning of large surfaces · Powerful 7.5 kW three-phase motor – designed for continuous operation · Power supply: 400V / 50Hz / 4P – stable and safe operation for professional use · Water pre-filter – pump protection and extended equipment service life · Automatic START/STOP system – energy savings and reduced component wear · Chemical injector – allows for the application of aggressive cleaning agents Laedpfx Abez D Sqwszog Advanced safety systems and operational comfort: The TECHKAR GT 15/250 pressure washer is equipped with an ON/OFF switch ensuring safe and reliable operation: · Overheat protection · Leakage current protection · Automatic START/STOP function · Total stop function · Robust industrial design · Powder-coated frame – resistant to mechanical damage and corrosion · 10-inch motor housing – additional protection for key components · Sturdy pneumatic wheels – easy maneuvering even on uneven terrain · Weight: 79 kg – operational stability and high durability Standard equipment for the TECHKAR GT 15/250: · High-pressure gun with lance and quick-connect fittings · 5 types of nozzles with varying spray angles and fittings ·quick-connect coupling ·reinforced 10m high-pressure hose with quick-connect fittings ·pressure gauge ·pressure control valve for adjusting settings to the specific task ·water filter ·chemical injector + suction hose ·gun/lance holder ·manual Technical specifications ·Working pressure: 250 bar | 3600 PSI ·Water flow rate: 15.5 l/min | 4.1 GPM ·Motor power: 7.5 kW ·Power supply: 400 V / 50 Hz / 4P ·Weight: 79 kg Applications of the TECHKAR GT 15/250 high-pressure washer The washer is ideal for use in: ·professional car washes ·industrial and manufacturing plants ·heavy machinery and vehicle service centers ·detailing companies ·agriculture and construction ·cleaning machinery, steel structures, floors, and facades

Condition: excellent (used), functionality: fully functional, Vegetable peeler (continuous peeler) Ljdpfx Abez D Ifwszeag Type: Peeler An industrial vegetable peeler is a professional device designed for the continuous, mechanical peeling and cleaning of root vegetables (such as potatoes, carrots, parsley root, beets, and celery). It is intended for fruit and vegetable processing plants, raw agricultural produce packing facilities, catering establishments, and large central kitchens. The peeling process is carried out continuously by rotating rollers covered with an abrasive material. The raw material, which moves along the working chamber, is evenly peeled. A spray pipe mounted above the rollers continuously washes away the peeled skin and contaminants, ensuring a high level of hygiene and excellent quality of the prepared vegetables.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: DAM413, Equipment: CE marking, Cryogenic tunnel freezer 4m Effective freezing length 0.3m Effective machine width Total machine length 5m Total machine width *Cooling medium: Liquid nitrogen 2.5-3 Bar *Robust and high-quality design. Construction with 120mm wall thickness. Manufactured from AISI 304 and 316 stainless steel. With fully welded tunnel sections. U-shaped bottom for optimum cleaning. Opening and closing of the freezing tunnel is achieved by pneumatic bellows, providing full access for cleaning and maintenance purposes. *Insulation: Hard foam with an average density of ± 40 - 50 kg/m³. Cryo seal. *5 axially mounted motor units, IP55 rating, fitted with stainless steel extension and propellers. *Product & loading: Product infeed height 120mm. Laodjz D H D Sjpfx Abzjg *Proportional controlled LN² injection. *Electrical stainless steel cabinet, IP67 rating. Control panel, IP55 rating. *Power supply: 3x400+N Pe 50Hz 16A. *CE declaration, food certified, user manual, after-sales service. *1 year warranty.

Condition: good (used), color: red, lifting height: 34,000 mm, Year of construction: 2018, operating hours: 1,230 h, Drivetrain Drive: Wheel Make of engine: Yanmar Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.500 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Delivery terms: EXW Upper hours: 1230 h Laodpjz A Al Aofx Abzeg Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Klaas K 23-33 TSR City trailer crane construction year 2018 with only 1.230 hours from the first owner. Machine is in a nice condition and has among other things: passenger basket included, remote controlled wheel drive, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Year of construction: 2020, condition: used, This listing is for Lancer 1400 LXP Ultima Laboratory Washer Getinge The unit is in full working condition and ready for immediate use Lasdpfx Abjz D Huqjzog The Lancer 1400 LXP is a freestanding, high-capacity laboratory glassware washer and dryer designed for demanding laboratory environments. It features three wash levels, multiple rack positions, automatic detergent and acid dosing, forced-air HEPA-filtered drying and programmable wash cycles. The chamber has a capacity of approximately 304 litres. Manufacturer specifications list external dimensions of approximately 789 x 831 x 1728 mm and a power requirement of 13.5 kW Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm Laodpfx Absz Az Dujzog

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, PBT Works SuperSWASH III PCB Cleaning System / Printed Circuit Board Washing System – 2021 Cleaning system for printed circuit boards / electronic assemblies For sale: a cleaning system for the professional cleaning of printed circuit boards and electronic assemblies. Features: * Cleaning, rinsing, and drying in a single process * Suitable for printed circuit boards, assemblies, solder frames, and stencils * Touch panel operation * Integrated DI water treatment system Laodpsz D Di Ssfx Abzog * Conductivity measurement * Efficient air knife for rapid drying * Barcode scanner for traceability * Industrial design Condition: used, fully functional Inspection possible by arrangement. Please contact us if you are interested.

Year of construction: 1999, condition: good (used), Machine is in good working condition. Laodpsz Atg Hofx Abzog

Condition: like new (used), functionality: fully functional, Very good condition, the machines looks like new. Angle sealing machine and shrink tunnel Manufacturer: AVC Sealing Solutions Angle sealing machine, type HS-500 Sealing strip: 500 x 600 mm Machine dimensions: 1780 x 1020 x 1120 Shrink tunnel, Type 1000 Tunnel opening: 440 x 300 mm Lsdjz Dwl Hspfx Abzjag Shrink length: 1000 mm Machine dimensions: 1800 x 1100 x 1600 Maximum heating power: 11 kW