Used Tos Su 125 for sale (5,395)

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and Hfodsv Hzqxepfx Ag Isg painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: new, Year of construction: 2024, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm center height over bed 125 mm centre distance 550 mm bed width 135 mm spindle bore 26 mm turning speed range - stepless 50 - 2.000 U/min power requirement 750 W 3-jaw-chuck diameter 125 mm taper in tailstock-quill MK 2 Hjdjwlvk Aopfx Ag Ijfg dia. of quill 30 mm quill stroke 70 mm voltage 230 V weight of the machine ca. 120 kg dimensions of the machine ca. 1,25 x 0,60 x 0,50 m

Condition: reconditioned (used), Year of construction: 2026, operating hours: 100 h, machine/vehicle number: BMWF241003, Professional Rebuild and Retrofit of Heavy CNC Lathes: Niles, Weiler, Gildemeister, TOS, TURMN The offer is for a TUR MN 560 CNC lathe. Max turning diameter: 560mm, max turning length: 960mm. Equipped with a 4-position Sauter turret. All wear parts have been replaced; the machine has been repainted and retrofitted with a new Siemens 828D. We specialize in restoring full operational capability and performing digital modernization of heavy machine tools that form the foundation of rigid and efficient production. We combine the legendary durability of heavy cast iron with state-of-the-art Industry 4.0 control systems. Hedpfx Aev R Dlyeg Iefg Why choose our retrofitted machine? Performance of a New Unit at 50% of the Price: We offer machines with the performance and accuracy of new machining centers at a fraction of the cost of a new investment. Unrivaled Rigidity: We rely on proven machine bases from brands such as Niles DFS 4 (slant bed, 17 t weight) or TOS SUA (load capacity up to 8 tons), which outperform modern, lighter designs in terms of vibration damping. Modern CNC Heart: We install the latest systems (Siemens Sinumerik ONE / 840D sl / 828D), ensuring full availability of spare parts, remote diagnostics, and ease of programming. ​ ​ Warranty and Support: Every machine after complete mechanical overhaul (DIN 8605 accuracy class) and electronic retrofit is covered by a 12‑month warranty. Our specializations: Niles DFS 3/4: Comprehensive rebuilds of multi-axis centers (C, Y, B) for the most demanding applications. Weiler E Series: Restoring legendary precision and intuitive cycle operation for premium toolrooms. Gildemeister NEF 710: “Smart Retrofit” of the control system, giving a second life to these reliable German designs. TOS SUA 80/100: Complete overhauls for the heaviest shaft and large-part machining. TURMN 630/800/1100: General overhauls and “Smart Retrofit” CNC control upgrades. Our offer goes beyond selling ready-made machines. We provide full flexibility and consulting throughout the investment process: Purchase on Request: At the customer’s request, we search for the optimal machine base on European markets (e.g. Germany, Italy, Poland). We use our experience in evaluating “dead CNC” machines to buy units at a price close to mechanical scrap value, while preserving their full potential for rebuild. Evaluation and Pricing of Market Machines: If the customer finds a machine independently, we offer a professional mechanical inspection (bed geometry, spindle play) and preparation of a detailed cost estimate for overhaul and retrofit. Overhauls of Customer-Owned Machines: We carry out complete modernization of machines already installed in the customer’s machine park.

Condition: used, Year of construction: 2013, Overview  This complete brewhouse was manufactured between 2011 and 2013 by various European manufacturers, including spanish manufacturer SlowBeer. It is for sale as the current owner is unable to dedicate sufficient time to its operation due to other business commitments. The brewhouse is currently dismantled and stored in Spain. Optional services such as dismantling, transport, and installation are available upon request. Technical data  Brewhouse capacity: 250 liters per batch Production cycle: approx. 2 weeks per batch Bottling cycle: 1 day per batch Production months/year: 10 months Shelf life of beer: 18 months Heating method: Electric (1 Hot Liquor Tank used), Butane option available (unused) Fermentation tank capacity: 500 liters each (3 tanks) Brewing system power: 15 kW Cooling system power: 2.3 kW Labeling power: 2 kW Scope of Delivery  1 x Brewing Unit | SlowBeer | MB 250 E | 2013 1 x Plate Heat Exchanger | Sondex Italia | S4A-IG16 | 2013 3 x Fermentation Tanks | — | — | — (500 L each, atmospheric) 1 x Cooling Unit | Winus | C2-W3R 4T | 2012 1 x Isothermal Hot Water Tank | Industrias Céspedes | — | 2011 1 x Labelling Machine | CDA | R1000 | — 1 x Filling Machine | Toscana | — | — 1 x Manual Capping Machine | — | P0085 | — 1 x Coder | — | MC150V | 2013 1 x Electric Mill | SOMMER | 11717 | — 1 x Compressor | FINI | — | — 1 x Compressor | MADER | YL90S-2 | 2012 (100 L tank) 1 x Steel Water Heating Tank | — | — | — (900 L) 2 x Water Softeners | — | — | — 2 x Hot Liquor Tanks | — | — | — (1 electric, 1 butane-based – unused) Optional Services: Dismantling, transport, and installation – available upon request.   Hodpowcyc Defx Ag Iofg

Condition: good (used), Included in the scope of delivery: 01x open front storage bin, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Internal dimensions: 560 x 360 x 167 mm Opening dimension: front half-side open, 275 x 82 mm (W x H) Handle: yes, one-sided, open Colour: blue Weight per unit: 1.59 kg General information about the item: Hjdpfow E D Iisx Ag Iefg This item is offered for collection only. Any additional transport or shipping of this item will incur extra charges, which can be requested from us depending on the delivery location and delivery scope.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,200 mm, table width: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISO 50 Travel X-axis: 1,250 mm Travel Y-axis: 1,100 mm Travel Z-axis: 950 mm Travel W-axis: 630 mm Table size: 1,120 x 1,000 mm Table load capacity: 3,000 kg Hfjdpfx Aoy Hrnteg Ieg

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls Hjdpfsy Sn Rzex Ag Ijfg - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture Hfedpfey R Dzmsx Ag Ijg – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 MACH-ID 2923 Make: TOS Type: HUR 50 Hsdpfowvht Rox Ag Iofg Year: 2015

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Hedpey H Dahsfx Ag Iofg Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Technical details: grinding diameter: 250 mm Hodpfx Agjyzptio Isfg grinding length: 1000 mm max. workpiece weight: 300 kg grinding wheel width: 150 mm Grinding wheel/diameter x bore x width: 600 x 305 x 80 mm folded disc width: 200 mm spindle taper: MK 5 tailstock taper MT: 5 sanding headstock rotation: 45° speeds:: 1050/1240 U/min longitudinal feed of the table: mind. 1 mm table speeds: 0,05-5 m/min traverse movement of the grinding headstock : 415 mm traverse movement of the grinding headstock with aut. infeed: 2 mm For grinding : 0,15 mm aut. infeed at table dead center: 0,005-0,05 mm for grinding : 0,0005-0,01 Self-infeed at grooving : 0,01-5 mm/min Quick adjustment of the grinding headstock : 60 mm grinding wheel motor: 19 kW total power requirement: 22 kW weight of the machine ca.: 5 t

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: FGWGS860LRT400256, fuel type: diesel, motor manufacturer: Perkins 4008-30TAG3, General information Field of application: Construction Weights Empty weight: 7.753 kg Functional Generator capacity: 1.250 kVA Dimensions of cargo space: 479 x 226 x 207 cm CE mark: yes Other information Fuel consumption: 185.5 Liter per Hour at 75% Load Generator: Leroy Somer LL8224H Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = Hfsdsxtzbaspfx Ag Ijg - Battery - Control Panel = Remarks = New and unused 2023 generator set with 0 running hours.

Condition: repair required (used), Year of construction: 1979, Table 1,120 x 1,000mm, spindle 100mm ISO40, X 1,200 Y 900 Z 900. Needs electrical rebuilding. Hfjdpey R Uzqjfx Ag Ieg

Condition: good (used), functionality: fully functional, BUA 25/1000 Hjdpfx Agowug A Is Isfg

Condition: used, Year of construction: 1984, grinding diameter 630 mm grinding length 3000 mm workpiece weight 2500 kg grinding wheel diameter 750 mm voltage 400 V Table Swivel 5° - 0° - 5° Internal Grinding Attachment Marposs Steadies Hfodpfx Asyyqhxog Ieg Dresser Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2002, spindle diameter 130 mm x-travel 3500 mm y-travel 2500 mm z-axis 1250 mm W-axis (spindle longitudinal) 800 mm ISO 50 P.D.B 1800x2500 mm 12 t 3000 Hertz 400 total power requirement 37 kW ATC 40 positions Safety guarding Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Hsdpfxoyqvqro Ag Isfg More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1990, HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH Hfsdpsfg Ep Djfx Ag Isg

Condition: excellent (used), functionality: fully functional, mileage: 271,771 km, power: 188 kW (255.61 HP), first registration: 12/2014, fuel type: diesel, empty load weight: 11,500 kg, maximum load weight: 6,500 kg, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2014, Equipment: tail-lift, Volvo FE280 / Carrier Supra 1250 MT / 3 compartments • Manufacturer: Volvo • Model: FE280 • Mileage: 271,771 km • First registration: 12/2014 • Power: 188 kW / 255 hp • Axle configuration: 4x2 • Box body: L: 7.80 m x W: 2.50 m x H: 2.20 m • Tail lift: Palfinger MBB C2000S • Lifting capacity: 2,000 kg Hjdpfxoyptt Uj Ag Ijfg • Hydraulic tail lift • Refrigeration: Carrier Supra 1250 MT • 3 separate refrigerated compartments (Right / Center / Left) • Multi-temperature operation (3 zones possible) • Manual defrost function • City-speed mode • Standby function (electric power supply) • Reversing camera • Radio • Cruise control • Air conditioning • Transmission: Automatic • Suspension: Leaf/air • Euro: 6 • MOT/TÜV valid until October 2026 • Unladen weight: 11,500 kg • Payload: 6,500 kg • Gross vehicle weight: 18,000 kg • German vehicle • German documents • Immediately operational • This offer is subject to change and non-binding. - Subject to prior sale. - Errors and/or omissions excepted. - Sale according to our Terms and Conditions.

Condition: good (used), Year of construction: 1986, turning length: 5,000 mm, turning diameter: 1,320 mm, swing diameter over cross slide: 1,250 mm, Swing diameter: 1,320 mm Hfsdoy Rm Amopfx Ag Ijg Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Swing diameter over support: 900 - 950 mm Total power requirement: 45 kW Machine weight approx.: 18 t

Condition: excellent (used), functionality: fully functional, Vertical lathe in excellent condition. Technical specifications: Machine weight: 54,000 kg Total connected load: 83 kW Max. workpiece diameter: 2,600 mm Max. workpiece height: 1,600 mm Max. workpiece weight: 15,000 kg Chuck speed: 2,400 rpm Hfjdpfx Asy Rl D Ajg Isg

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Hodpoy Iwf Hofx Ag Isfg Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: new, For sale: New KSB ETABLOC GN 65-125 centrifugal pump with Siemens 5.5 kW motor. The unit is from warehouse stock – excellent condition, unused. KSB ETABLOC series pumps are high-quality industrial pumps designed for water installations, heating and cooling systems, process installations, and general industrial applications. Robust construction and a reputable Siemens motor ensure high reliability and long service life. Pump technical data • Manufacturer: KSB Aktiengesellschaft • Model: ETABLOC GN 65-125/552 • Capacity: 18 – 136 m³/h • Head: 11 – 19.2 m • Rotational speed: 2900 rpm Motor • Manufacturer: Siemens • Model: 1LA7130-2AA66 • Power: 5.5 kW • Voltage: 400 / 690 V • Protection class: IP55 • Housing: B35 Hsdpjyuqxrjfx Ag Ijfg The pump is equipped with flanged connections – ready for installation in your system.

Condition: new, power: 207 kW (281.44 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, loading space length: 75,200 mm, loading space width: 24,700 mm, loading space height: 24,000 mm, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will assist you (by telephone). Iveco Eurocargo ML160E28/P 4x2 Refrigerated Box Body + Tail Lift + Door Hfodpfx Agoyfpn Hs Iog Axle Configuration: 2 axles, rear axle drive, cab version: standard day cab NS, engine: 280 T7, ZF automatic transmission 8AP, gross vehicle weight rating: 15-16 t, drive axle variant: single reduction, single axle, rear air suspension, disc brakes front/rear, standard chassis with cab, wheelbase: 5175 mm, transmission mode: standard, driver fatigue warning system (Driver Drowsiness Attention Warning), standard frame overhang, AdBlue tank heating, standard brake system, electronic stability program (ESP), intake air heater for optimal cold start under extreme conditions, reversing monitoring system with camera, blind spot monitoring system (BSIS) right side, intelligent speed assistance (ISA), forward detection (MOIS), pneumatic parking brake, 200-liter lockable plastic fuel tank, plastic steering wheel, heated fuel pre-filter on frame, IVECO logo standard light gray, standard component positioning on chassis, interface cable for alcohol interlock (ALC), 30-liter AdBlue tank, tyre pressure monitoring system (TPMS) with internal sensors, steel rims, rear axle ratio: 4.13, lane departure warning system (LDWS), 4G connectivity box incl. TCO service contract, voltage converter 24/12 volt (10.5 ampere), hill start assist (Hill Holder) for easier starting on gradients, emergency brake assist (AEBS), speed limiter 90 km/h, adaptive cruise control (ACC), coat rail on rear cab wall incl. sliding hooks, manually operated cab tilting mechanism, warning triangle compliant with ECE-27 dimensions and specifications, front halogen headlights, standard flat-roof day cab, EC Certificate of Conformity (COC) type approval, solid rear cab wall (no window), on-board toolkit, radio with Bluetooth, DAB+ and 7" display, warning beacon, standard vehicle badge, rear view mirrors for 2600 mm body width, mechanical roof hatch, first-aid kit, vehicle jack, cab interior trim with fabric upholstery, EC digital tachograph 4.1, rear air suspension, front parabolic spring, front shunting/towing eye, front underrun protection for chassis >7,490kg GVW, gray chassis frame, C-profile steel ladder frame, chassis corrosion protection Tectyl 300 G Clear, ZF 8AP1000 automatic gearbox, exhaust outlet centrally under vehicle, air filter unit under cab, emission standard EURO VI E, NOISE ECE 51/03, two-stage engine brake, activated via right steering column lever, Westinghouse brake, open intake system (no snorkel), heated air dryer for brake system, axle load display in instrument cluster, LED rear lights, switchable reverse warning buzzer, 170 Ah batteries (recommended for use with tail lift and/or PTO), preparation for toll system (OBU), including antenna and wiring in dashboard, 2880-watt alternator (24 volt x 120 amp), right adjustable armrest on driver's seat (adjustable angle), electronic immobiliser, compressed air connection in engine tunnel console, electrically adjustable and heated exterior mirrors, driver seat Hi-Comfort, multi-adjustable, air-suspended, integrated headrest and height-adjustable safety belt, ...

Condition: ready for operation (used), Tos SN 55 B Conventional Lathe with Digital Readout and Safeties Swing diameter over bed: 540 mm Swing diameter over support: 300 mm Spindle bore: 75 mm Turning length: 1600 mm Dimensions: 360x150x180 cm (LxWxH) With feed on X and Z axis With steady rests With extra jaws With safety features With removable carriage section With coolant pump With Mitutoyo digital readout 380v Location: Budel, Netherlands Transport: negotiable upon request Call or email for more information. Also check out our other listings. Hjdpfx Agsylpqhe Ijfg We are looking for industrial machines throughout the year. Do you have machines available? Send us photos and information. The seller is not liable for any typographical or data transmission errors. The machine's appearance, technique, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Condition: good (used), Tos Hostivar cylindrical grinding machine Type: 1U X-path: 900 mm Hfjdpoq H Ap Nefx Ag Ijg bed: 900 x 140 mm Turning diameter bed: 260 mm Chuck diameter: 120 mm Diameter grinding stone max: 320 mm Dimensions: 150x105x140 cm LxWxH