Used Toppy Pallet Inverter / Pallet Changer for sale (10,255)

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Hodpfezzz R Dox Ap Hsnt Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Technical data: Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Hodpfxezypt Re Ap Hent Machine in good working condition Inspection and test run possible while powered on The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Further technical details and the exact machine configuration can be verified during an on-site inspection.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, load capacity: 1,500 kg, lifting height: 2,950 mm, fuel type: electric, mast type: telescopic, construction height: 2,030 mm, battery capacity: 100 Ah, battery voltage: 12 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 440 kg, total height: 2,030 mm, total length: 1,750 mm, total width: 750 mm, fuel: electricity, Hand Pallet Truck Protec S 15 – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 1.500 kg Lifting height: 2.950 mm Closed height: 2.030 mm Mast: Standard (2S295) Hedpfx Apoz Aqcfe Hont Fork length: 1.150 mm Drive: Elektro 24V Battery: 12 V 100 Ah Starter Charger: Einphasig 12 V 20 A tested Tyres: Polyurethan Poly Service weight: 440 kg Length: 1.750 mm Width: 750 mm Year of manufacture: 2020 Condition: ready to drive Internal no.: 1309269 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: new, Year of construction: 2026, functionality: fully functional, LTS - Semi or fully automatic pallet changer system. Hjdpfx Ajxd Erqjp Hjnt A quick and simple way to switch from wooden to plastic pallets, or vice versa.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed Hodpfx Apjz A A Dxo Hent - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Hnjdpfx Apswu Rgqo Hot Renishaw RMP60 workpiece probe TS27R tool probe

Condition: new, Year of construction: 2026, NEW MACHINES The Mini Logy pallet exchanger system is well suited to most products, and where pallets need to be change from wooden pallets to plastic pallets automatically, or vice versa. Hedpfxehx D Als Ap Hsnt The system can be assembled according to your needs and capacity. Our systems can be customized and work with AGV solutions (Automated Guided Vehicles).

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, For sale is a high-quality, customer-specific robotic handling system from Wehling Anlagen- und Maschinenbau GmbH, manufactured in 2018. The system was originally developed for the automated processing of wooden pallets and large-format sheet materials and combines two work processes in one system: * automatic destacking of nested wooden pallets * automatic sorting and restacking of large-format sheets according to quality classes The core of the system is a powerful 6-axis Kawasaki BT200L industrial robot with an automatic tool changer. The system is ideally suited for applications in the wood, construction materials, sheet materials, and logistics industries, or as a basis for individual automation projects. Technical equipment: Manufacturer: Wehling Anlagen- und Maschinenbau GmbH Year of manufacture: 2018 Project No.: P113104 Kawasaki 6-axis industrial robot BT200L Robot payload: 200 kg Large working radius Siemens TP700 Comfort touch panel PLC control Main switch cabinet Automatic tool changer Pallet gripper Sheet suction gripper 4 pallet stations Automatic pallet recognition Paper dispenser for interleaving sheets Safety fence Safety light curtains Pneumatic system Possible applications: Pallet handling Pallet destacking Pallet turning Sheet sorting Hodpfxsziwprs Ap Hjnt Order picking Material handling Automation of manufacturing processes Robotics projects Retrofitting of existing production systems Scope of delivery: Complete robotic system Kawasaki BT200L Robot controller Switch cabinet Siemens HMI Pallet gripper Sheet gripper Tool changer station Pallet stations Paper dispenser Safety fence Safety light curtains Documentation Operating manual Condition The system is in operation. The scope of delivery corresponds to the existing components. An inspection is possible by appointment. Special features: Special machine construction "Made in Germany" High-quality Kawasaki industrial robot Extensive documentation available Ideal basis for retrofit or automation projects Technical data: Feature Value Manufacturer Wehling Anlagen- und Maschinenbau GmbH Type Combined system pallet destacker / sheet sorting Year of manufacture 2018 Project P113104 Robot Kawasaki BT200L Payload 200 kg Control Siemens TP700 HMI / PLC Gripper Pallet gripper + sheet suction gripper Safety equipment Light curtains, protective fence

Condition: used, Spring actuated self-levelling pallet turntable, capacity 2000 kg Spring actuated turntable, which keeps palletised loads at an optimal working height, using a system of calibrated springs and shock absorbers. No power source or compressed air required. Hodpfezz Ranox Ap Hent Lowers the risk of fatigue and injury. Reduces the time taken for loading and unloading pallets by over 40%. Fitted with fork pockets for easy relocation. Smooth running ball bearing turntable, which eliminates the need to walk around or stretch over the unit. Height 240mm (compressed), 710mm (extended). Turntable dia. 1100mm. Weight: 160kg. CE marked.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,500 h, control type: CNC control, controller manufacturer: Beckhoff, laser type: fiber laser, laser source model: MaxPhotonix, laser hours: 1,700 h, laser power: 12,000 W, sheet thickness (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, input voltage: 400 V, type of cooling: water, overall weight: 10,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser for sale: Machine: Songu Mach 3015 Year 2023 - Put into operation 2024 Power: 12kW MaxPhotonix laser source Size: 3x1.5m Working area Working Hours: Total run time - 105days (2520h), Total NC run time 73days (1752h) Operating system: Beckhoff PLC operated from Windows 10 CAM system: Lantek CAM, postprocessor for the machine. Easy to use and conventient. Gas system: Hoerbiger with 3 gas inlets (O2, N2 and compressed air 16BAR/Or anything else) Fully enclosed and with CE marking Safety systems: Opening the door stops the machine and changing table light barriers stop the table changing process (does not stop the machine while working) Table changer: Hydraulic table changer with two pallets. Pallets in the machine remain in the same height, tables are chain driven. Hydraulic liftin capacity 1410kg Alpha direct drive servo drivers for axises with Alpha reducer gears. Laser head: Precitec ProCutter2.0 - spares and consumables available in EU Automatic lubrication of axises and guideways Fume extractor: Donaldson - has big panel filters with automatic cleaning function. Starts when machine starts cutting. Laser frame has sectioned fume extraction system - flaps open up where the laser head is moving. Positioning speed: 100m/min, acceleration 2.4g Accuracy: Positioning +-0,05, Repositioning +-0,03 Weight: Main frame ~8800kg, loading table ~2500kg Camera inside the working area Side access from two doors, front access Elecrical cabinet mounted to the machine Cuts materials like: Mild steel, stainless, aluminium, copper, brass. Example, 20mm mild steel - cutting speed 4m/min (O2), 3mm cutting speed 28m/min (N2) High pressure air compressor: 16Bar compressor for Air cutting, cheaper function for cutting mild steel Hsdpfoyk Uuiox Ap Hent Uses NC code for cutting, part size is determined from NC and cutter compensation parameter that can be changed from the machine Machine cutting parameters - Fly cut, film burn, small contour, etc. One single parameter consists of 9 different adjustable parameters. Option for nozzle cleaning while cutting and programmable nanojoints (extra small breakaway point for part removal) Automatic focus control Automatic sheet location measuring system Part Stop, Contour Stop, Crash sensor, Low pressure sensors, etc MDI mode for simple sheet trimming funcion Machine bed protected from heat Waste trolleys under the main cutting area and loading table Graphical visualisation on cutting plan Alarm log files Under power, can be tested Location: Tallinn Estonia

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Hedpfoz Ay Rrjx Ap Hont Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: used, Year of construction: 2004, Continuous drying machine Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 Technical specifications - Total connected power: 23 kW - Usable width of the pallets: 1300 mm - Usable length of the pallets: 7100 mm - Total number of pallets: 24 - Infeed/outfeed speed of the workpieces (adjustable via inverter): 2-20 m/min - Max. workpiece thickness: 200 mm Hsdpfjz A S Imox Ap Hont - Max. load-bearing capacity per pallet: 150 kg Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" Hjdpfxjzzz Nao Ap Hent - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1250 mm Y-AXIS TRAVEL: 700 mm Z-AXIS TRAVEL: 750 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 850 mm Hnsdpeyvlxksfx Ap Hst RAPID FEEDS X-Y-Z: 15 m/min SPINDLE: 4000 rpm; 26 kW; ISO 50 - DIN PALLET: N.2 TABLE SIZE: 650 x 1400 mm MAX ADMITTED LOAD: 1500 Kg HIGH PRESSURE COOLANT: 30 Bar TOOL MAGAZINE: CHAIN-TYPE ; 41 POS MAX TOOL DIAMETER: 120 (200) mm MAX TOOL LENGHT: 400 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: FANUC 16i-M WEIGHT: 16750 Kg OVERALL DIMENSIONS: 7135 x 5300 x 3426 mm ACCESSORIES: SWARF CONVEYOR ; GEAR BOX

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 Hnodpfxoz A Sz He Ap Hot 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Hedpfx Ajz A R R Hjp Hent Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: good (used), Year of construction: 2005, operating hours: 32,099 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 5,800 mm, total width: 4,800 mm, table width: 400 mm, table length: 500 mm, overall weight: 12,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,648 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis horizontal machining center from the manufacturer Starrag. The machine is used, has been regularly maintained, and is in fully functional condition. Machine Details - Manufacturer: Starrag - Model: CWK 400D - Year of manufacture: 2005 - Operating hours: 32,099 - Control: Siemens Sinumerik 840D - Machine weight: 12,800 kg - Footprint (LxW): 5.8 x 4.8 m Technical Data Travel paths: - X = 625 mm - Y = 650 mm - Z = 650 mm - B axis: 360° (0.001° increments) / 100 rpm - Spindle speed: 50 – 10,000 rpm (stepless) - Motor power: 24 kW / 37 kW - Torque: 250 Nm / 350 Nm Table & Pallets - 2 pallets, each 500 x 400 mm - T-slots to DIN 55201 - Load capacity: 400 kg - Pallet changer included (changeover time 8 s / 5 s) Tool Data - Interface: DIN 69893-HSK-A63 - Chain magazine with 60 tool positions - Tool diameter: 80 mm (up to 160 mm with adjacent pockets free) - Max. tool length: 350 mm - Max. tool weight: 10 kg - Total tool weight: 200 kg Equipment & Extras - Coolant system (emulsion, internal & external supply, approx. 1100 L) - Knoll coolant unit with fleece filter (30, 40, 50 bar) - Measuring probe: Renishaw - Tool breakage monitoring in magazine - Chip conveyor - Flood wash, paper band filter, cleaning gun at setup station - Fully enclosed working area to UVV safety standards - Pallet sequence mode - Network connectivity, Ethernet interface - Technical documentation & layout plan included Maintenance - Carried out regularly - Machine is fully functional Hnodpfx Apsx Ib T Ie Hjt All details have been prepared to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Year of construction: 2013, condition: good (used), Pallet wrapper, Brüninghaus or Siat, FS401 – used: Hnodpfozbyl Isx Ap Het Price ex works: only €3,500 (net)! Device 3 Manufacturer: Brüninghaus or Siat (Brüninghaus is part of Siat) Type: WS 165 N, or 16-M or Siat model F1L Service number: 1030.11625 Year of manufacture: 2013 Pallet length L: 1200 mm Pallet width B: 800 mm Pallet height H: 2100 mm Maximum pallet weight: 2000 kg Program selector: manual/automatic 10 different programs Film tension control via mechanical brake Turntable speed adjustable via inverter Easy operation Fixed stop device Photo cell for sensing pallet height Turntable diameter: 1650 mm Machine can be easily repositioned using a forklift 400V, 600 watts, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg

Condition: used, Year of construction: 1995, Fanuc MSC 516 2 pallets, 500x500mm BT40 spindle Hnedezgrzkjpfx Ap Hjt Spindle speed: 12,000 RPM 20-tool changer Coolant pressure: 20 bar Renishaw

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 9,267 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 30,410 mm, total length: 70,000 mm, total width: 44,270 mm, coolant supply: 30 bar, spindle motor power: 26 W, number of spindles: 60, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, spindle nose: ISO 50, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, tool diameter: 250 mm, tool length: 550 mm, workpiece diameter (max.): 1,000 mm, Equipment: chip conveyor, rotational speed infinitely variable, Horizontal machining center with automatic pallet changer "DOOSAN mod.HM 630" with CNC Fanuc 18i-MC Hjdpfx Apetvf Sme Hsnt

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Hnedpfx Apjz A D Irs Hjt Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: like new (used), For sale is a fully functional pallet box washer, used but recently overhauled by the manufacturer. The following components have been newly replaced: chemical dispenser, heating elements, rotary nozzle, complete control system with frequency inverter, and minor parts. The washer features a cycle that first applies foam and then washes the boxes, with two types of nozzles for foaming and washing. Loading and unloading of boxes is carried out by the pneumatic opening of the front door to a position level with the ground. When the door is open, boxes can be loaded either by forklift or manually. A video demonstrating the machine's operation is available. The set also includes two safety barriers for operating the door. Hnjdpfxoyxv Hwj Ap Het

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken Hnjdeyr Dawepfx Ap Hjt • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: used, Pallet roller conveyor Accumulating 7500-1000-840 RA2349 Hnodpfjvr Ncyjx Ap Hot Conveyor length (FL): 7500 mm Roller width (RB): 840 mm Outer width/nominal width (NB): 1000 mm Roller spacing / pitch 175 mm Frame height: 160 mm Current storage space size approx. 900 mm 8 storage spaces Storage mechanism can be converted for other storage space sizes, e.g. 1200 mm for Euro pallets Length can be extended/reduced. Several units available single roller drive chain, so that several elements can be driven with one motor. for pallet weights up to 1000 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, feed length X-axis: 559 mm, feed length Y-axis: 406 mm, feed length Z-axis: 508 mm, controller model: NGC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, 12,000 rpm inline direct-drive spindle High-speed, 30+1 tool capacity side-mount tool changer Integrated pallet changer with 559 x 368 mm T-slot pallets Machine parts are placed on one pallet while the other is being prepared. Hodpfxezr U Hyj Ap Hent