Used T-S-I Mastermix Gear Basic for sale (103,500)

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Lajdpfx Alsudk Amebeh

Condition: new, number 37 Positionen 28 mm condition neu weight 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolt: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. Ljdpfxsgazl Rj Alboah

Year of construction: 2007, condition: good (used), 1 x Ilpra RotoBasic Traysealer Laodpjz Ehf Tsfx Albsh Vacuum/gas Serial Number: 7971 171 x 127mm tray Rotary table tray sealer with mould included. Suitable for MAP. Vacuum pump included (integrated).

Condition: good (used), 50-position filler with crown cap closure. Used in a winery for filling wine into 1L glass bottles Lsdpfx Alevq Suisbeah

Condition: ready for operation (used), Wittmann MTC Basic-C90 F27 Temperature Control Unit Single-Circuit Temperature Controller Price is for one unit. Several units available! Year of manufacture: 2017 Year of manufacture: 2017 Year of manufacture: 2018 Max. temperature: 90°C Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Power: 10 kW You are welcome to schedule a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. Lasdeyw Rh Hjpfx Albjh For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check our further offers. Company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data and errors in the item description may occur and are subject to change.

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Laedpfxstz Dkye Albeh

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. Lasdpfx Aodqzh Rjlbsh LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Clockwise/counterclockwise rotation. Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Speeds: 3500/6000/8000/10000 min-1 Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Dust extraction port diameter: 2 x 120 mm

Condition: excellent (used), Smart Switch Manufacturer: Netgear Model: Pro Safe 24 port Gigabit Smart Switch GS724T V4 A 24-port Gigabit Ethernet switch is an ideal solution for small and medium-sized networks. Thanks to its built-in PoE (Power over Ethernet) functionality, it can remotely power IP cameras, VoIP phones, and other network devices, simplifying installation and reducing cabling requirements. Ledpjyxpqijfx Albsah

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Features and Technical Specifications Lasdpfxs Advffj Alboh - Motor power: 4 kW/400 V - Saw blade swivels on both sides from -46° to 46°—a total swivel range of 92° for flexible angle cuts against the rip fence and crosscut fence - Maximum cutting height: 72 mm - Saw blade diameter: 250–315 mm - Saw blade speed: 5,000 rpm - Cutting width: 1,250 mm - Sliding table length: 3,300 mm - Touchscreen control with an eye-level control panel - Electric height and tilt adjustment of the saw blade - Intuitive operating menus with step-by-step guidance for complex operations - Integrated calculator and special functions for angle cuts and chamfering - Tool management for up to ten tools, enabling dimensionally accurate setup without the need for re-referencing after a saw blade change - Keyless “VLock” quick-change saw blade system for fast tool changes - Precision sliding table with interchangeable table lip and sturdy hollow-section profiles, lockable in any position - Ball-bearing-mounted rip fence with adjustment via handwheel and digital display - Length stop with smooth-running stop carriage and fine adjustment - Splitting wedge guard for a clear view of the saw blade and workpiece - Dust extraction port on machine stand: 120 mm - Dust extraction port on guard: 60 mm - T74 parallelogram cross table - DIN A4 guide holder - T74 length stop, similar to the above, with continuous stop surface and two hinged stop elements - CE standard - Weight: approx. 1,250 kg

Condition: ready for operation (used), A Nagel + Hermann transfer and placement machine for transfer motifs (rhinestone, hotfix or similar) is available. Colors: unlimited, shapes: unlimited, production capacity: 5000elements/h, max. motif dimensions X/Y: 300mm/300mm, machine dimensions X/Y/Z: approx. 820mm/650mm/650mm, weight: approx. 120kg. Including PC notebook, CAD software, 4x conveyor plates, 2x mounting plates as well as various spare parts and tools. Documentation available. An on-site inspection is possible. Ledpfxozdul To Albjah

Condition: good (used), Year of construction: 2011, PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Fanuc, Terminal I/O Basic Dual Module -Type: A03B-0823-C001 A03B-0823-C003 -Price/Sale: complete -Dimensions each: 140/130/H150 mm -Weight: 0.9 kg Lsdpfx Aewt Rw Holboah

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. Lsdpfx Asv Taq Rolbeah There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Laodpjrwxz Rjfx Albeh Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: new, mileage: 16 km, power: 427 kW (580.56 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, S-WAY AS440S58 T/FPADR 04406 ELECTRIC ROOF HATCH 01520 STANDARD BLACK GRILLE 73203 STANDARD STICKERS FRONT DOOR PILLAR ONLY 02198 FRONT PARABOLIC SPRING 07279 PLASTIC FRONT BUMPER 00874 AS MY HIGH ROOF CAB 01626 LOGOs STD LIGHT GREY 72579 2 KEYS WITH IMMOBILIZER 14987 WITH WVTA CERTIFICATE OF CONFORMITY 01738 INSTRUMENT CLUSTER 10 INCHES 02104 DUAL-LINE TRACTION/TRAILER AIR COUPLING - ISO 06139 STANDARD FIFTH WHEEL COUPLING 02085 TRAILER/SEMI-TRAILER SOCKET 15 POLE ISO 08380 REAR OVERHANG 1047.5 MM 02104 DUAL-LINE TRACTION/TRAILER AIR COUPLING - ISO 06139 STANDARD FIFTH WHEEL COUPLING 02085 TRAILER/SEMI-TRAILER SOCKET 15 POLE ISO 08380 REAR OVERHANG 1047.5 MM 08329 STANDARD GEAR SHIFT MODE 08289 TOLL COLLECTION SYSTEM PREPARATION 00278 CONNECTIVITY BOX AREA 1 77985 ENGINE IDLE CUT OFF 00868 STANDARD SETTING CURSOR 13 02647 AERODYNAMIC KIT 02475 TPMS WITH SENSOR INTEGRATED IN THE RIMS 14569 STANDARD DATA INTERFACE FLEET MANAGEMENT SYSTEM 77389 ECO-ROLL 78878 GPS-PREDICTIVE DRIVE 14522 ADAPTIVE CRUISE CONTROL - A.C.C. 07638 WITH REVERSING WARNING 78287 LANE DEPARTURE WARNING SYSTEM EU STANDARD 02221 ADVANCED DRIVER DISTRACTION WARNING 02211 WARNING TRIANGLE NO. 1 00671 STANDARD CATWALK 14861 HILL HOLDER 07888 ESP (ELECTRONIC STABILITY PROGRAM) 00407 REVERSING SYSTEM 00404 BLIND SPOT ON PASSENGER SIDE ONLY 00409 INTELLIGENT SPEED ASSIST 00880 NO HIGH WAY ASSIST 02548 SIDE MARKER LIGHTS 00402 STARTING INFORMATION SYSTEM 78484 AEBS COMPLIANT 00414 ALCOHOL INTERLOCK INTERFACE 76960 ENGINE PLATE 01043 ENGINE SPEED 1650 RPM 78514 STANDARD REVERSE GEAR 05313 EURO VI E CALIBRATION 73131 DRIVE TIRE 315/70R22.5 06356 SPEED LIMITER 90 KM/H - ELECTRONIC 07356 LOAD 8000-13000 78031 630CC CLUTCH COMPRESSOR 78032 120A SMART ALTERNATOR 08552 PNEUMATIC FRONT SUSPENSION 01242 STANDARD CHASSIS 08620 BATTERIES LOCATED ON REAR OVERHANG Lsdpfoz Ednkjx Alboah 76048 STANDARD PROTECTIVE TREATMENT 00219 TWO FOOTRESTS 01669 SINGLE REDUCTION SOLO LIGHT 17X 06439 UNIFIED AIR TANK PLATE 02358 REAR SHOCK ABSORBERS 06434 TEMPERATE ZONE EQUIPMENT 06433 STANDARD EQUIPMENT 08294 CHASSIS WITH GRAY IC 444 (RAL 7021) PAINTED COMPONENTS 00127 STANDARD STEERING CIRCUIT 06467 STANDARD GCW 07700 JACK 73073 BATTERY CHARGE PIN 00073 FRONT STABILIZER BAR 03181 LOW-POSITIONED EXHAUST PIPE 08071 ENGINE AIR FILTER UNDER CABIN 06113 STANDARD REAR PNEUMATIC SUSPENSION 08378 DEVICE AND PROVISION FOR DUAL CHASSIS HEIGHT WITH PNEUMATIC SUSPENSIONS 00829 12TX 2860 TD GEARBOX 02326 PLASTIC PARTS IN VISIBLE COLOR CAB PASTELL 02759 CABIN PNEUMATIC SUSPENSION 02714 HEATED AND ELECTRICALLY ADJUSTABLE REARVIEW MIRRORS 02758 POWER-ASSISTED CAB TILT 00632 EXTERNAL SUN VISOR 79585 ROOF INSULATION FOR SUB-ARCTIC CLIMATES 00823 DIGITAL TACHOGRAPH DTCO 4.1 ADR 02443 STEERING WHEEL WITH LEATHER COVER 78563 PNEUMATIC HORN - CHASSIS 05629 ROLLER BLIND SUNSHADES ON DOORS 02917 HIGH COMFORT DRIVER SEAT IN LEATHER, SEAT BELT ADJUSTMENT, ADDITIONAL RECLINING ADJUSTMENT, CLIMATE AND VENTILATION CONTROL, RECLINING ADJUSTMENT 72264 1-PIECE HARD LOWER BED WITH PROTECTION 01765 CHROME FINISHING 08117 SWIVEL PASSENGER SEAT LUXURY UPHOLSTERY, PNEUMATIC SUSPENSION, 3 DEGREES OF FREEDOM, EXTENDABLE AND HEATED CUSHION, HEADREST, LUMBAR SUPPORT ADJUSTMENT 07830 FIFTH WHEEL H 150MM +

Condition: used, Technical details: jaw width: 160 mm weight of the machine approx.: 13,5 kg span width: 208 mm Lsdsvc Dv Ajpfx Albsah *

Condition: good (used), Koenig Rex Futura II roll plant. In very good ex bakery condition. Photos show machinery whilst in storage and before cleaning. Better photos will follow. Lsdpfx Aljvth Aueboah

Condition: new, New Siemens Basic Panel. The original packaging was only opened for the purpose of taking photographs. Manufacturer: Siemens Product series: SIMATIC HMI Type: KTP600 Basic Color DP Article number: 6AV6647-0AC11-3AX0 Device type: Basic Panel Laodpfx Ajzcgzljlbeh Display size: 5.7 inches Display type: TFT color display Resolution: 320 × 240 pixels Operation: Buttons and touchscreen Interface: PROFIBUS DP Degree of protection (front): IP65 Supply voltage: 24 V DC Programming software: WinCC flexible Compact, Standard and Advanced

Condition: ready for operation (used), * Brand: Radicon * Model: worm gear uits * Type: BU 12 Lasdpfx Aleywmaxebeh * Ratio: 30 : 1

Condition: new, axle configuration: 2 axles, total width: 25,500 mm, total height: 32,600 mm, Equipment: ABS, Humbaur HBT 106224 BS Basic, sloped Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Permissible total weight: 11,900 kg Payload: approx. 9,100 kg Wheelbase: 990 mm Tires: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 750-1000 mm Ramp angle: approx. 16° Plank length: approx. 2,600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3,000 kg per lashing point, lashing rings recessed in the floor 7 pairs of lashing rings, 1,000 kg per lashing point, lashing rings in the outer frame Standard equipment: Axles: axles from renowned manufacturers Suspension: low-maintenance parabolic suspension with load compensation Tires: tires according to the manufacturer's choice on steel rim Braking system: ABS braking system according to ECE directive with ALB function, ABS plug connection ISO 7638, spindle parking brake, 2 fail-safe coupling heads red/yellow ISO 1728 Towing device: drawbar with DIN screw eye Ø 40 mm, galvanized, steplessly adjustable via crank Electrical system: 24V lighting system with multi-chamber tail lights and LED side marker lights, 15-pin connector for lighting Frame: solid, welded and hot-dip galvanized frame, sloped rear area, incline 12° Floor: floor made of 40 mm softwood planks Side walls: side walls made of anodized aluminum, foldable and removable on the side, corner posts galvanized, pluggable at the front and rear Ramps: 2 foldable steel ramps, 1-piece, galvanized, laterally adjustable, ramp lift 1 gas spring per ramp, ramp locking on the rear crossmember, ramp surface made of galvanized grating Support: reinforced 12 t geared support with load and quick gear, 2 telescoping folding supports on the left and right at the rear of the vehicle Equipment: steel fenders with anti-spray mats, side impact protection up to the 1st axle, foldable, 2 chock blocks with holder, contour marking on the side and rear, space for a two-line license plate on the left ramp On request, we will provide you with a leasing or financing offer. Laedpfxoyfvg Ao Albsh Mr. Seidel (Tel.) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale reserved!!! = Further information = GVWR: 11,900 kg Please contact Tobias Ebert for further information.

Condition: new, functionality: fully functional, Year of construction: 2016, machine/vehicle number: VM-BASIC-90-CON, Vacuum lift device unit for handling of windows. Lsdpfeyngimjx Albsah Load: 200 kg. Dead weight: 114,88 kg. Four vacuum cups diameter 210 mm. Electrical vacuum pump. Acoustic warning for low vacuum. Electrical tiltable 90 degrees.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 1,800 mm, total length: 3,500 mm, total height: 2,500 mm, High-quality degreasing and cleaning system based on PER This system is a high-quality and high-performance degreasing and cleaning system based on perchloroethylene (PER) with a standard basket size. Thanks to two pre-treatment tanks, integrated ultrasonic cleaning, and vacuum drying, the system enables safe, thorough, and fast degreasing of a wide variety of metal workpieces. The complete stainless steel piping and high-quality system components ensure high operational reliability and a long service life. The system has been professionally overhauled and is ready for immediate use. Ljdpfszmxlpjx Alboah An inspection of the system while it is running is possible at any time in 75447 Sternenfels after prior arrangement. We are always available to provide further information or answer any questions you may have. We look forward to your inquiry! System equipment: - Workpiece handling - Spray system - 2 x hot flushing systems - Ultrasonic cleaning with 1.0 kW / 25 kHz - Process filter 100 μm - Fine filter 5 μm - Vacuum drying - Vacuum distillation - Adsorption unit Technical data: Solvents that can be used: Perchloroethylene PER Filling volumes: 600 dm³ Operating mode: 2-shift Connected load: 40 kW Compressed air: 6 bar System weight: 3000 kg Throughput: Up to 5 batches/h (150 kg/h) Basket dimensions: 480 x 320 x 300 mm

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Lodpfovwfmlox Albsah

Condition: used, This listing is for a BioRad ID-Incubator 37 S I The unit is in full working condition and is ready for immediate use Bio-Rad Laboratories ID-Incubator 37 S I is designed for use in diagnostic and research workflows. The ID-Incubator 37 S I is a compact, temperature-controlled incubation system typically used for immunohematology and related laboratory testing procedures. Key features usually associated with this model include: - Maintains a stable incubation temperature around 37°C, which is standard for many biological and clinical assays. Lodpfsxzhimox Albjah - Provides controlled incubation conditions to support reliable test reactions. - Built for compatibility with ID-card or gel-based testing systems commonly used in blood typing and serology labs. - Designed for laboratory environments requiring precise and uniform heating

Year of construction: 2017, condition: used, Roll lifter (roll manipulator) for lifting and rotating rolls. Lodszzkcvspfx Alboah Rotates rolls from a vertical to a horizontal position for easy assembly and allows for lateral movement, enabling effortless pallet handling. Lifting capacity: 100 kg Lifting height: approx. 155 cm

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1729, Technical data: IHF - Ingersoll Rand - Quick Lift QLA 75-S-GM manipulator handling device, lifting aid Ljdpfx Alszv Hw Esbjah Payload at full extension 75 kg, at the gripper 25 kg Overall height approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight approx. 400 kg Swivel range 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is disassembled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities from 80 to 5000 kg; please inquire. See pictures. Shipping by freight forwarder or collection only by prior arrangement.