Used Stamping Press (Servo) + Decoiling Line for sale (23,351)

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram Rodpju Rwa Ijfx An Aot - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Redoi A A Tbspfx An Aot Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake Rjdpfxohx R Eto An Aot - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: used, Single-column eccentric press WEINGARTEN type ER 63 Machine. No. 52A / 63 Year of construction 1963 Pressure capacity 63 ton. throat 280 mm Rjdpfx Anolb I Dzs Ajt Table surface 630 x 530 mm ram stroke adjustable 8-100 mm ram adjustment 63 mm Stroke rate 65 strokes / min. Motor power 4 kW Mains connection 380 Volt, 50 Hz - Clutch/brake combination with WEINGARTEN friction threaded clutch - Electric lift release via foot switch - Wheel reduction gear - Overload protection by breaker plate - Front crankshaft support bearing Space requirement L x W x H 1500 x 1100 x 2500 mm Weight 4.5 tons good condition

Condition: excellent (used), Offer for juice pressing line: - Flottweg B-FRU-1500 LR press, year 2004 - mill/crusher - mash pump Redpfx Aoyc D N Tjn Ajt - Flottweg control cabinet - juice pump - slotted filter for water from belt washing - water pump - pulp pump - process cabinet All machines and equipment are made of acid-resistant stainless steel. The price is for the complete set of machines.

Condition: used, Year of construction: 2001, functionality: fully functional, Technical Specifications Press capacity: 800 kN (80 tons) Stroke rate: 60 – 320 strokes per minute (SPM) Stroke adjustment: 8 – 80 mm Ram adjustment (shut height adjustment): 80 mm Table size: 830 × 700 mm Bolster plate thickness: 80 mm Redeyidnyspfx An Ajt Table opening: 500 × 200 mm Strip feed height over table: 120 mm Ram area: 500 × 400 mm Ram bore: Ø 50 × 90 mm Ram centering bore tolerance: 30 H7 mm Precision guided ram, multi-roller guidance system. Main motor power: 23 kW Drive system: Flywheel drive with planetary gearbox and pneumatic clutch/brake combination. Machine weight: approx. 8000 kg Gripper Feed Schaal SZV 3: Feed length: 4 – 150 mm Strip width: 10 – 270 mm Strip thickness: 0.1 – 4 mm We also have on stock Schaal SEP 80 with SWV3E 300 mm wide Servo Feeder. Unidor Control, Machine and Operator Safety. Full Technical Documentation in German including Parts list and Technical drawings.

Condition: used, BRET Press blanking line 830x4 Technical characteristics Width: 100 - 830 mm Thickness: 1 - 4 mm Max. weight: 20 Tn Exterior diameter: 900 - 2100 mm Interior diameter with segments: 610 mm Interior diameter without segments: 508 mm Decoiling: from top or from bottom Engine power: 55 kW Elastic yield (for max. thickness): 650 Rm (Mpa) Tensile strength (for max thickness): 900 Rm (Mpa) Scope of supply 1. 4 arms coil loader turnstile 2. Coil carriage 3. Single cantilevered decoiler with hold down roll 4. Opener & centring unit 5. 17 rolls leveller 6. Pit accumulator entry basket 7. Exit basket and pulling unit 8. A 700 tons Press 9. Press side exit (2 bands) 10. Double traverse conveyor with deviation and tilting unit 11. Main stacker 12. Side tacker #1 13. Rollway at stacker’s exit #1 14. Side stacker #2 15. Rollway at stacker’s exit #2 16. Video inspection camera system 17. Pallet introduction rollways for side stackers 18. Magnetic scrap conveyor 19. Operator desks 20. Switch cabinets 21. Hydraulics 22. Existing documentation (to be checked) 23. Available spare parts DELTA Measuring system · Number of measured edges: 2 · Width capacity: 100 - 800 mm BRET Leveller · First level rolls: Ø 55 mm · Number: 17 · Thickness: 0,8 - 4 mm · Driving Power: 110 kW Press · Size of press: 800 mm · Blank length: 100 - 1790 mm · Length tolerances: +/- 0,25 mm · Pressure: 320 Tn · Maximum speed: 100 m/min Cuts/min with tensile strength = 500 Mpa · 130 cuts/min for minimum length · 80 cuts/min for 500 mm · 52 cuts/min for 1.000 mm · 38 cuts/min for 1.500 mm Rsdeymbg Dspfx An Ajt Engine power: 55 kW Stacker by gravity · Number of tables: 1 · Length: 1750 mm · Chain conveyor · Positions per table: Length 5 & Width 3 · Maximum stacking height (including wood): 650 mm · Kind of pallets: Wood spacers / Square + plank / Square + square · In-line weighing Side stackers by gravity · Number of exits: 2 bands · Length 100-800 · Tilting device · Stacker height 650 · Buffer system while changing stacking column · Pallet input front the back side · Scale In both exits Magnetic scrap conveyor Video inspection system Width: 100 - 830 mm Thickness: 1 - 4 mm Max. weight: 20 Tn Exterior diameter: 900 - 2100 mm Interior diameter with segments: 610 mm Interior diameter without segments: 508 mm

Condition: used, Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Redpewtw E Dsfx An Aot Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Rodpfx Ajvi Hh Isn Aet Online-Video-Inspection...

Condition: used, Prägepresse / Hot Foil Stamping Press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Rjdpfx Ajt Drnxsn Ajt

Condition: used, machine/vehicle number: 24118, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Rjdpfxout Tkgs An Ast

Condition: used, machine/vehicle number: 21035, Heißpräge - Kniehebelprägepresse - Embossing Hot Stamping Press Krause FNPSerial-No. 4798 Stamping size: 550 x 400 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Redpoh Ayg Uefx An Ast On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 18040, Kniehebelprägepresse - Embossing hot stamping press Hans Schilling HSMSerial-No. 18040 Redpfxeh Axf Hs An Aet Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Promess KA-EMF80 Servo Press 80 kN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Condition: New Rsdpsrgn Nnjfx An Ajt Calibrated: Yes Strain Gauge Amplifier: BA 624.u2 Financing through our bank is also available. komplett-konzept.leasingo.de Find more new and used servo presses in our shop! International shipping costs on request!

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: Rjdpfx Ajgpxc Ssn Aot - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Rsdpotgvgpefx An Aet Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: good (used), Year of construction: 1986, operating hours: 10,000 h, power: 30 to (US) , app. 270kN bolster area: 30" x 21" = 762 x 533mm ram-area: 800 x 300mm strokes/min: 100...1400 1/min Redpfxsnl Sne An Aot stroke (fixed): 1" = 25,4mm ram adjustement: 1,75" = 44,5mm Equiped by * Hydraulic clutch * Roll feeder Make: Sankyo Type: Variax V70 Width: max. 100mm Only app. 10.000 working hours

Year of construction: 1993, condition: ready for operation (used), A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible. Rodox S Rbvopfx An Ajt

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h Rjdpfxjxpqy Do An Ajt - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t Rsdpfxslil Ewe An Ajt coil-dia max. 1.500 mm

Year of construction: 1988, condition: used, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² Rodpsbicz Hsfx An Aet coil weight max. 4 t coil-dia max. 1.500 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, Rsdpfxoxf Hm Ss An Ast – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW

Year of construction: 2023, condition: new, Standard version: - Y1, Y2, X, R (4-axis) X=650 mm X,R - Control system - CNC CYBELEC ModEva 19T - CNC controlled motorised crowning - European clamping system - throat - Sliding front support arms with T-slot and tilt stop - Rear stop: Siemens DC servo with linear guide & ball screw - Protective covers Special accessories: (Available depending on bending length and pressing force): Bending aid: - Bending aid -motor. Height adjustment - max. load 125 kg - Bending aid -motor. Height adjustment - max. load 250 kg Backgauge axes: - X=650 mm X,R,Z1,Z2 (AL) - X=650 mm X,R,Z1,Z2,Delta X +/- 125mm CNC controlled - X=650 X1,X2,R - X=650 X1,X2,R,Z1,Z2 - X=750 X1,X2,R1,R2,Z1,Z2 - X=1000 mm X,R (AL ) - X=1000 mm X,R,Z1,Z2 (AL) Control: - DELEM DA 69T - DELEM DA 66T Safety system: - CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) - CE with FIESSLER AKAS-3P motorised + FPSC (SAFETY PLC) - CE for tandem machines FIESSLER AKAS light barrier - tandem - - preparation + safety cover with switch - AKAS 3P tools: - Various tool clamping systems as well as tools to choose from. Further options: - DAM (Durma Laser Angle Measuring System) - Air conditioning for control cabinet - additional support arms movable - Central lubrication manual - Central lubrication motorised - Control panel on the other side - additional stop fingers - oil cooler - Parking area for bending aid (1 metre) Rsdpfen Tnn Eex An Ast - second foot pedal - die rail (groove 12.7 mm width, 15.8 mm height) - special painting - Tandem preparation - oil heating - laser bending line - lateral sliding doors Are you interested in exactly this machine model or do you have specific questions? Please use the contact field to send us a message. We will answer you immediately!

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION Rjdpfx Aotx E N Tsn Ajt - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device Redsn Tvcdspfx An Ast -Indramat: AC Servo Line Former from DMT CD320 cycle lathe -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg