Used Sraml Btt-3X1,4 for sale (42)

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L Bdodezk Eqmjpfx Acnsg - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2002, Technical details: turning diameter: 370 mm turning length: 200 mm Spindle 1 RPM: 4000 1/min control: Siemens 840 D Spindle 2 RPM: 4000 1/min power capacity: L / R 18/24 kW max. torque on the spindle: 630 nM C-Axis: 0,001° Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret No.2 stations / rotary tools: 12/12 VDI 40 turning speed range - milling: 3000 1/min power capacity - milling spindle: 8,8 kW torque rotary tools: 28 Nm Bar capacity spindle 1: 85 mm total power requirement: 65 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 5,7x2,4x2,1 m Travel x1: 260 mm Travel x2: 260 mm Travel Y1: 600 mm Travel y2: 600 mm Accerories Chip conveyor .tools Parts and total counter Automatic separation wall Standard set of tool holders Power Chuck 2 x 250 mm Bdjdpfjxlrkcjx Acneg manual tool eye l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools. *

Condition: used, Year of construction: 2001, Technical details: turning diameter: 500 mm turning length: 1000 mm control: Siemens 840 D spindle: 42 / 28 kW spindle turning speed - stepless: 31 - 4000 1/min max. torque on the spindle: 345 Nm c-axis: 360000 x 0,001° feeds -stepless-: mm/min rapid traverse: mm/min turret stations / rotary tool stations: 12/12 VDI 40 RPM of rotary tools: 2000 1/min diameter of quill: 90 mm quill stroke: 80 mm tailstock quill taper ISO: SK 30 Tailstock Travel: 600 mm Power rotary tools: 3,5 kW : 22,5 Nm Rotary tool holders: 4 ax./ 4 rad. spindle passage: 66 mm total power requirement: 30 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 8x 3 x 4 m Bedpfx Asyv Ha Ascnodg Accerories Power Chuck Programmable Tailstock Chip conveyor

Condition: used, Year of construction: 1998, Technical details: x-travel: 630 mm y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, Bdjdey Er Tgjpfx Acnjg *

Condition: used, Technical details: Tool holder shaft type: HSK-A 100 Tool holder shaft type: Wohlhaupter Tool holder shaft type: Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Bsdpfsyug Ebjx Acnodg Sales list with prices upon request. *

Condition: good (used), mileage: 85,835 km, power: 140 kW (190.35 HP), first registration: 12/2022, fuel type: diesel, tire size: 215/75R17,5, wheelbase: 4,820 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: steel, number of seats: 3, total length: 8,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,970 mm, loading space width: 2,240 mm, loading space height: 2,350 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, = Additional Options and Accessories = Bdjdpszb Dbmjfx Acnjg - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Manual - Radio/cassette - Lane keeping assist - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Payload: 1866 kg, Tare weight: 5624 kg, Gross vehicle weight: 7490 kg, Total tank capacity: 200 liters, Fifth wheel coupling: Fixed, Winch pulling capacity: 350 tons, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Seat heating, Bluetooth, Engine power: 140 kW (188 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 8, Power steering, ABS, ASR, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, ONLY 85,000 KM, AIR CONDITIONING, AUTOMATIC, 3 SEATS, DOOR IN THE BACK OF THE BOX = Additional Information = Transmission Transmission: ZF, 8 gears, Automatic Axle Configuration Tire size: 215/75R17.5 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Weights Tare weight: 5,624 kg Payload: 1,866 kg GVW: 7,490 kg Functional Loading platform height: 100 cm Maintenance APK (technical inspection): valid until 12/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €678 per month (default, 60 months); Please inquire for more information and conditions Identification License plate: 02-BTT-1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing inventory of 1200 used trucks, tractors, and trailers. Our offer includes all European brands, from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: excellent (used), mileage: 460,811 km, power: 375 kW (509.86 HP), first registration: 02/2023, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 860 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,980 mm, total width: 2,550 mm, total height: 3,880 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2023, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, navigation system, onboard computer, parking heater, power assisted steering, power mirror, second fuel tank, soot filter, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Alarm system - Aluminum fuel tank - Exterior thermometer - Heated mirrors - Passenger seat - Leaf spring suspension - Car kit - Sunroof - Roof spoiler - Differential lock - Digital tachograph - Speed limiter - Air conditioning - Leather interior - Leather upholstery - Air suspension Bdsdpfx Ajzvb U Escnog - Air-suspended seats - Particle filter - Sleeper cab - Side door - Side skirts - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system = Additional Information = General Information Number of doors: 2 License plate: 22-BTT-8 Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Transmission Transmission: TRAXON, automatic Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/55 R 22.5; Max. axle load: 8000 kg; Steered; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70 R 22.5; Dual tires; Differential lock; Max. axle load: 11500 kg; Tire tread depth left inner: 90%; Tire tread depth left outer: 90%; Tire tread depth right inner: 90%; Tire tread depth right outer: 90%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 7,668 kg Payload: 12,332 kg GVW: 20,000 kg Interior Upholstery: Leather Number of seats: 2 Maintenance, History and Condition APK (Technical Inspection): valid until 02/2027 Technical condition: very good Optical condition: very good

Year of construction: 2018, condition: used, We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts * Bdodpfjvfdvbox Acnjg

Condition: used, Year of construction: 2005, Technical details: size of pallet: 400x400 mm numbers of pallets: 15 table load: 400 kg Bedpfx Acsvc Adljnedg weight of the machine ca.: 0,060 t dimensions of the machine ca.: 0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale *

Condition: used, Technical details: Bedpfx Acevfdr Nonodg Tool holder shaft type: BT 40 Tool holder shaft type: Futter / Chuck Tool holder shaft type: Weldon Big selection of BT 40 Tool holders for sale. All kinds of Weldon, Chucker etc. available. See pictures. *

Condition: used, Technical details: length: 1200 mm width: 500 mm height: 1260 mm Bdjdsvfduwepfx Acneg

Year of construction: 2025, condition: new, functionality: fully functional, Available models on GAS and Electrical power supply with different dimensions and capacities Perfect for artisanal bakeries, semi-industrial plants and retail stores The ideal solution for anyone looking for superior baking performance and maximum flexibility when working with different types of bread and pastries, regardless of shape, size or quantity. It burns perfectly at both full and partial loads. Innovative baking systems for perfect results BTT (Bottom to Top) baking system – air circulates from the bottom up, creating a floor oven effect for a unique baking quality. The result: a product that leaves customers breathless! DAF (Double Air Flow) – extremely even baking thanks to the double airflow that encompasses each product. Not available on model 4676. Ideal for: Cakes and pastries of low weight (e.g. 60–70 g Kaiser pastries, biscuits, sticks, tarals...) Fast baking cycles (less than 15 minutes) High racking (more than 18 levels) Narrow and long trays (e.g. 46×80 cm) OPT function – allows you to monitor the efficiency of the furnace operation in real time, helping in more rational use and energy savings Technical characteristics: Bdjdjwhdhuepfx Acnsg Baking surface: 6.3 m2 (n°18T 46x76) Oven dimensions WxDxH: 123x171x251 Minimum room height: 270 cm Power GAS: 52 kw 44000 kcal/h Electrical power: 1.5 kW Weight: 1350 kg Max. Baking temperature: 300 °C Heating: electric or gas/light fuel oil Main switch located on the control panel Advanced control and management TOUCH electronic control "Ready to Bake" – the stove is always ready with lower consumption "Recovery Time" – the exact time to re-readiness Partial Load Management Password protection of recipes USB 2.0 for fast and secure data transfer. Effective steam management Speed Dry – faster steam ejection (70% faster), for crispier and more fragrant products Increased steam generator (standard equipment) – higher volume and better steam distribution Automatic steam damper Stainless steel exhaust – 900 rpm Energy efficiency and durability High-performance heat exchanger and firebox (in combustible versions) Double armored heaters (electric version) Two-layer high-density mineral wool insulation Rubber-silicone seal + stainless steel – long life and no steam leakage Thermo-reflective glass – saves energy Ergonomic vertical handle along the entire height of the door, with double locking system Raised stove bottom – additional thermal insulation Connection to a power limiter (only on electric models) Construction and ergonomics: Stainless steel front and hood Stainless steel floor with adjustable flaps for air regulation Rotary trolley unit with motor and mechanical overload protection Manual lifting mechanism Trolley access door 194.5 cm high (model 4676 off) Door with hinges on the right side Stainless steel access ramp, gentle inclination for easy insertion/removal of the trolley Flat inner surface – easy to clean Prepainted steel side panels Access to the main controls from the front Heavy Duty version (HD kit) – available for models 80100 and 80120 For intensive work over 8 hours a day and average temperatures above 250 °C – additional reinforcements for maximum durability.

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 1 h, load capacity: 1,300 kg, lifting height: 195 mm, fuel type: electric, power: 65 kW (88.38 HP), motor manufacturer: Toyota, battery model: Lithium-ion, fork length: 1,150 mm, total length: 1,530 mm, total width: 540 mm, color: orange, Equipment: CE marking, 🔧 Key Specifications: • Year: 2023 • Condition: New / Unused • Operating hours: 1 h • Max. lifting capacity: 1,300 kg • Max. lift height: 195 mm • Fork length: 1,150 mm • Battery voltage: 12 V • Battery capacity: 36 Ah • Charger voltage: 230 V • Charger current: 12 A • CE certified: Yes ✨ Highlights: ✅ Lithium-ion battery for increased productivity and low maintenance ✅ Compact, ergonomic design ideal for confined spaces ✅ Effortless maneuverability with vertical tiller operation Bodsy Hp Nuopfx Acnedg ✅ Suitable for retail, warehouses, and truck loading/unloading ⚙️ Condition: Brand new with full maintenance history. Single previous owner. Ready for immediate use. 🌍 Location & Delivery: 📍 Located in Sittard, The Netherlands 🚚 Worldwide delivery possible 💰 Price: €2,089 excl. VAT (€2,528 incl. VAT) The Toyota LHE 130 BT Tyro is an entry-level electric pallet truck combining the flexibility of manual pallets with electric drive efficiency. Designed for light-duty transport in narrow aisles and tight areas, it features a powerful lithium-ion battery, fast charging, and an ergonomic design for operator comfort and productivity. 🚚 Delivery: • Professional loading and crane assistance available on request • Flexible shipping options worldwide • Managed by Colle Rental & Sales logistics team

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter Bsdpfx Aewh Rp Eecnjdg - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil - Tank capacity: 1,200 liters - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment - 1 x central lubrication system - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Bsdpfx Asxdm Awscnedg Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Bjdew E H E Repfx Acnodg Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: excellent (used), JBT Tipper Tie TN4200LP automatic whole muscle stuffer, netter, clipper and rucker for producing high quality hams. Extremely rare machine on the used market. Has come direct from a UK ham factory which closed in June 2026. Very well looked after since bought new in 2016. Bodpfx Aezh N Hyjcnjdg