Used Skrlj Inox Tankovi Inox Tankovi Vinifikatori Sa Hladjenjem for sale (4,655)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total height: 18,000 mm, outer diameter: 3,000 mm, water tank capacity: 70,000 l, Tank made of stainless steel with a capacity of 70,000 litres. Insulated body with load cells. Volume Total capacity 70,000 L Material Stainless steel Equipment configuration Insulated Load cells Transport information Length 18,000 mm Width 3,500 mm Fgsdpfx Alexlir Djbog

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Fsdpfx Ajzf E Hqolbegg Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: Fgsdpfszf E Dvjx Albeg - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: new, tank capacity: 437 l, wall material: stainless steel, Unused, temperature-controlled stainless steel container with insulation Article number: 10910 Volume: Approx. 437L Material: 1.4404 stainless steel V4A Surface: Interior IIId, exterior satin finish Welded seams inside the container pickled, passivated and brushed Operating pressure: ATM Operating pressure for thermoplates: Max. 1.8 bar -Vertical design on three legs -Top: 1/2 hinged lid, 1/2 fixed with screws, with tension handle (can be locked open) -Sheet metal grids below the hinged lid as a strainer, screwed on, removable -1x thermoplate on the cylinder, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -1x thermoplate on the bottom, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -Insulation t=30mm mineral wool for cylinder and bottom, welded stainless steel insulation jacket 1.4301 -Bottom: Conical bottom with central outlet and forward-extending pipe DN50 DIN11851 -Outlet valve: ball valve DN50 DIN11851, gasket EPDM/PTFE -Agitator flange on the top Container dimensions: Outer diameter: 650mm Cylindrical height: 1300mm Overall width: 750mm Overall length: 850mm Overall height: 1930mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4404 / AISI 316 Fgodpfx Aljzwmr Eebeg Features: Outlet diameter: DN50 Distance from outlet to bottom: 110mm Height of legs: 330mm Nameplate: yes Agitator: Variable speed propeller agitator for low-viscosity media Type: SRT8-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.75kW Speed: 1410 RPM (continuously adjustable) Voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for smooth running within the speed range -1 piece 3-blade mixing propeller Ø 138mm at the end of the agitator shaft Mixing propeller made of a stainless steel casting, highly polished -Stainless steel flange, sealing V-ring, EPDM -Motor mounted on neoprene rubber buffers Infinitely variable speed control of the agitator motor via a compact, motor-mounted frequency inverter, manufactured by Getriebebau NORD. Including potentiometer. Pre-programmed for agitator operation. Operating voltage 3PH 400V

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: B29779, year of last overhaul: 2026, TRANSPAK TP 702 Inox automatic strapping machine, arch 650 x 500, 8 mm strapping, speed of 50 straps per minute, automatic strapping feed and ejection, adjustable tightening tension via potentiometer, cycle start via foot pedal or button, year 2021. Fgjdpfx Ajzidnzelbeg

Year of construction: 2017, operating hours: 100 h, condition: excellent (used), functionality: fully functional, Equipment: CE marking, The SMRE machine is used for hot air welding of PVC fabrics and synthetic materials. The machine is in like-new condition and has been used very little. The working width is 800 cm. Fgodpfx Alszkqm Hjbeg

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 6 kg, first registration: 06/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED STAINLESS STEEL INSULATED SINGLE-COMPARTMENT TANK REF: 26-U-79 TYPE: Stainless steel tank OVERALL DIMENSIONS TOTAL TANK LENGTH: 3.70 m TOTAL TANK WIDTH: 2.00 m TANK HEIGHT: 1.55 m TOTAL TANK VOLUME: 8,000 L COLOR: Steel Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales representative for an updated price and conditions comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Specialized in trucks, trailers, and demountable equipment. With a fleet of over 50 trucks and over 150 bodies, containers with and without demountable cranes, ready for immediate delivery. Fgsdpfx Alozhc A Uebeg S.E.&O Given the amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 1,500 W, laser wavelength: 1,063 nm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 1 mm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 100 m/min, cutting speed: 60 mm/min, workpiece weight (max.): 50 kg, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, type of cooling: water, overall weight: 1,000 kg, total length: 1,630 mm, total width: 1,450 mm, total height: 1,850 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, Extremely precise and fast machine. The software is easy to learn. Output power from 1 to 3 kW is available for this machine. This laser cutting machine is extremely robust and requires minimal maintenance. Ideal for cutting all types of metals. The recessed marble bed prevents warping due to heat. Applications: medical technology, toolmaking, precision components. Fsdpfx Aljzzwx Djbsgg

Condition: good (used), Stainless steel tank 5000 L with mixer, cooling. In good condition Fgodpfx Ajvr E N Nelbog They have a built-in pipe around the tank that can cool

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: Fodpfjzytmzox Albjgg - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: used, Roller conveyor in good working order Overall length: 2300 mm Length up to the curve: 1200 mm Fgodjzy Abhspfx Albeg Roller width: 500 mm Height: 630 mm Please check out my other listings.

Condition: like new (used), Used heatable/coolable stainless steel container Type: STOC3300TPRW Item number: 10844 Volume: Approx. 3300 liters Type: Upright design on three height-adjustable feet Design: Single-walled with thermoplate Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished outside, BA (IIId) inside Internal weld seams: Pickled, passivated and brushed Fgjdouy Ribepfx Albog Max. Operating pressure: Atmospheric Max. Operating pressure thermoplate: 1.8 bar Max. Operating temperature: 95°C Top plate: 15° conical bottom Bottom: conical bottom 15° with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2430mm Equipment: 1x Ø 500mm manhole cover with swivel bracket on the top, EPDM seal 1x ladder bracket 1x thermoplate on cylinder H=900mm on cylinder 1x agitator flange connection IEC250 3x spherical caps / height-adjustable feet with foot plates 1x vent valve DN50 stainless steel unpressurized on the top plate 1x DN50 DIN11851 spigot outlet in the center of the underbody 1x DN50 DIN11851 spigot on the top shelf with blind cap 1x DN65 DIN11851 spigot on the top shelf with blind cap 1x type plate

Year of construction: 2025, condition: new, Brand new stainless steel agitator tank with beam agitator and load cells CILC2000RWS Volume: 2107L Dimensions approx.: Ø 1430mm x cyl. Height 1250mm Total height: approx. 1650mm (plus agitator motor) Material: 1.4301 stainless steel V2A Surface: inside BA (IIId), outside satin finish Welding seams in the container ground -Standing design on three feet -Top: hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in 90° open position) -Metal grates below the hinged lid as protection against soap, screwed, removable -Bottom: conical bottom with central outlet DN50 DIN11851 nozzle -Agitator flange on the top Fodpfx Asvtyf Iolbjgg -1x reserve nozzle DN50 DIN11851 on the top with blind cap -Type plate -180° spray head - Weighing cells - Speed control Agitator: Bar agitator Make: Schwarzer Rührtechnik GmbH Type: SRTGMK/1.5-149 Power: 1.5KW Speed: 149RPM Operating voltage: 3PH 400V -Gearbox made by Getriebebau NORD -Solid agitator shaft with sleeve coupling attached to the gear motor, removable -Agitator shaft balanced for concentricity in the speed range -2 2-blade bar agitators Ø 500mm, height adjustable on the agitator shaft, attached via side power screws Grilled and passivated -Stainless steel flange with shaft seal and O-ring seal -MFR converter

Condition: used, Year of construction: 2007, Controls: EIP, voltage: 230V, connected load: 3kVA, with CE marking. An on-site inspection is possible. Fedpfxjzzqb Se Albegg

Year of construction: 1987, condition: used, One Rösler R 300 A/SA-KP and one R 300 RT are available, year of manufacture: 1986/ 1987, 1) R 300 A/SA-KP, connected load: 4.5kW, weight: 830kg, 2) R 300 RT, connected load: 19kW, weight: 2,130kg, with documentation. An on-site inspection is possible. Fjdpfx Aezuzy Ejlbogg

Condition: good (used), Year of construction: 2002, functionality: fully functional, Manufacturer: PFM Model: Zenith Inox Year: 2002 Output: approx. 50 pcs/min Electrical power: 4.5 kW Weight: 680 kg Fgjdpfx Aloxapzzebjg Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 1,500 W, laser wavelength: 1,063 nm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 1 mm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 100 m/min, cutting speed: 60 mm/min, positioning speed: 60 m/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 50 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 1,000 kg, total length: 1,630 mm, total width: 1,450 mm, total height: 1,850 mm, warranty duration: 12 months, Equipment: cooling unit, documentation/manual, emergency stop, Extremely precise and fast machine. The software is easy to learn. Output power from 1 to 3 kW is available for this machine. This laser cutting machine is extremely robust and requires minimal maintenance. Ideal for cutting all types of metals. Fsdpfx Aezzkrwslbogg The recessed marble bed prevents warping due to heat. Applications: medical technology, toolmaking, precision components.

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Fedpfxexx Tigo Albsgg Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, tank capacity: 4,000 l, usable tank capacity: 4,000 l, total width: 1,600 mm, total height: 3,500 mm, wall material: stainless steel, manhole diameter: 400 mm, manhole location: top, 4,000 L Stainless Steel (Inox) Tanks * Quantity: 7 units available Specifications & Dimensions: Option 1 (2 units): Diameter: 180 cm, Height: 250 cm Option 2 (5 units): Diameter: 160 cm, Height: 360 cm (Can be shortened to 300 cm) Additional Equipment Filter Press: Seitz Orion 40/60 – 2 units Fgjdpsyw Tp Hsfx Albog

Condition: good (used), Year of construction: 1990, functionality: fully functional, G & H FS 40 SA, Year of manufacture: 1990, Grinding length: 400 mm, Fodpfx Alezpwywsbjgg Grinding width: 200 mm, Working height: 320 mm, Electric facing device, Cross clamping, Cross stop.

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 500 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 3,500 rpm, table load: 200 kg, number of axes: 2, Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details. Fgodozwpt Eepfx Albeg * Grinding length: 500 mm* Grinding width: 200 mm* Maximum grinding height (table to spindle center): 350–397 mm* Magnetic chuck: 500 x 200 mm* Table load capacity: 200 kg* Hydraulic table feed: up to 27 m/min* Grinding spindle motor power: 1.5 kW* Standard grinding wheel: 225 x 19 x 50.8 mm Optional Accessories available

Condition: like new (used), Equipment: type plate available, Used stainless steel transport container Prepared for agitator Type: SBPA150 Item number: 10796 Volume: 173 liters Type: Upright design on pallet Design: Single-walled, 1.5mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin-finished outside, IIId inside Internal weld seams: Pickled, passivated and brushed Fsdpfxor A Enge Albogg Operating pressure: Atmospheric Top: 1/2 hinged lid Underbody: dished bottom with outlet bead Tank dimensions: Tank diameter: 650mm Total height: 815mm Pallet: 675 x 719mm Equipment: 1x 1/2 hinged lid on the top, latching function (lid can be latched in open 90° position) Stainless steel sheet metal grates underneath the hinged lid, screwed, removable DN50 ball valve outlet fitting DIN11851 Galvanized transport pallet Type plate

Condition: excellent (used), Catalog number: 8094 TECHNICAL DATA - track width: 300mm - shaft width: 300mm - max cutting height: 120mm - max blade diameter: 350mm - blade bore diameter: 70mm - from above: - 2 rows of pawls/ejectors - smooth, sliding pressure shaft - pawls/ejectors - pressure - shaft with saw blades Fgsdpfszx U Iqsx Albeg - pressure - smooth, sliding pressure shaft - from below: - guide - pawls/ejectors - track - 1 feed speed + stepless - main motor power: 22kW - feed motor: 2kW - central lubrication - laser - extraction nozzle diameter: 250mm - table dimensions (length/width): 2000x710mm - dimensions (length/width/height): 2600x1500x1600mm – weight: 1340kg ADVANTAGES - Made in Italy - With laser - Multi-blade saw, used, in perfect condition Net price: 36900 PLN Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: Fodpfjxvbvvox Albjgg - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Semi-automatic compact glass storage system 25 positions Maximum glass size: 3210 x 6000 mm Drawer load capacity: 6000 kg Total loading capacity: 150000 kg (150T) Total floor dimensions: L 6100 x W 9200 x H 3050 mm In very good and clean condition Good working order, tested As is See video Fsdpfxezdylxj Albjgg