Used Servo Actuator for sale (4,118)

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Hnodpfezbg Ezsx Aitju Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: used, SincoTec Hnedpfxszimb Dj Aitou Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servohydraulic testing machine – fully functional Description: For sale is a servohydraulic testing machine, Sincotec Power Flow, from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g. in the automotive, mechanical engineering or research field. Technical highlights: Max. testing force: 100 kN (up to ±150 kN) Max. torque: ±2000 Nm (up to ±4000 Nm) Linear stroke: ±50 mm (max. ±75 mm) Max. swivel angle: ±50° Servohydraulic control Control via Sincotec TestPilot / CoPilot software Includes large hydraulic power unit Dimensions & testing machine Testing table: approx. 1.20 × 1.00 × 1.20 m (H) Overall height of testing machine: approx. 3.30 m Hydraulic power unit (separate) Height: 2085 mm Length: 2714 mm Width: 1820 mm Fully functional before disassembly Power supply / electrical (from nameplates) Individual units / motors 230 V / 50 Hz Leak oil pump: 0.18 kW / 1.5 A 400 V / 50 Hz (three-phase) Crossbeam: 0.25 kW / 0.79 A Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2018, LNS QUICK LOAD SERVO III, year 2018 in very good condition. Hodpfx Aijzpyq Eetjnu

Condition: new, AUMA 07.1-F10 multi-turn actuator, new -Order number: 23078028 -Serial number: 2218NS66675 -PTB 01 ATEX 1119 Hnodpez Sk N Dsfx Aitsu -SKE0 56-2/80 -Article number: Z048.703 -AZ F-3-S-ISO-STD

Condition: good (used), For sale: Hodpfx Asz Sk N Rjitenu - Raco T606 electric actuator - Actuator length: 800mm - Motor: 0.75Kw, 230/380V - Speed: 20mm/s - Force: 15KN

Condition: excellent (used), Year of construction: 2008, Mossini press Servo drive Pressing force 2,000 kN Stroke adjustment 20 - 100 mm Stroke rate 30 - 90 strokes/min Ram adjustment 100 mm Tool installation height 455 mm Year of manufacture 2008 Includes Kohler conveyor system. Hnedpfxoz Sz Sbo Aitou

Condition: ready for operation (used), Heidenhain 337 558-04 servo card 00, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hnjdpfjz Syy Dsx Aitou

Condition: used, SincoTec Type: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic testing machine Description: For sale is a servo-hydraulic biaxial testing machine, the SincoTec POWER FLOW BIAXIAL. The machine comes from an industrial application and was fully functional until it was decommissioned. Service and maintenance were carried out professionally. Extensive technical documentation (operating, assembly, and wiring diagrams) is available. The testing machine is suitable for tensile/compression tests, torsion tests, and combined load tests on components and assemblies, e.g., for fatigue, life, and functional tests. Technical main data of the testing machine: Maximum test force (design): up to ±150 kN Typical operating design: 125 kN Max. torque (torsion): ± 4,000 Nm Max. stroke of linear cylinder: ± 75 mm Max. angle of rotation: ± 50° Measurement accuracy: Class 1 (DIN EN 10002-3) Dimensions of the testing machine: Overall height: approx. 3,430 mm Width: approx. 1,480 mm Depth: approx. 1,180 mm Max. weight of clamping device: 250 kg Hydraulic power unit (included in the scope of delivery) Drive power: approx. 152 kW Flow rate: approx. 260 l/min Operating pressure: up to 280 bar Hydraulic oil: HLP ISO VG 46 Tank volume: approx. 1,500 liters Dimensions of the power unit: Length approx. 2,714 mm Width approx. 1,820 mm Height approx. 2,085 mm Hnjdszimcbepfx Aitou Electrical data: Control cabinet / testing machine 400 V / 50 Hz Connection: CEE 5-pole Fuse: 16 A Hydraulic power unit 400 V / 50 Hz three-phase Fixed connection Fuse: approx. 160 A Scope of delivery Servo-hydraulic testing machine SincoTec POWER FLOW BIAXIAL Hydraulic power unit Control cabinet with industrial PC Measuring and control technology Technical documentation The machine is designed for a maximum of 150 kN. The 125 kN specification refers to the typical operating design. Weight of testing machine: approx. 4.7 t Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2005, functionality: unexamined, For sale: complete industrial lot of 27 pcs FESTO DNG-160 pneumatic cylinders. Manufacturer: FESTO Model: DNG-160 Quantity: 27 pcs Type: pneumatic cylinders / heavy-duty actuators Condition: unused old stock / New Old Stock Age: approx. 20 years in storage Functionality: not individually tested Hedpfxswxfrpj Aitjnu Sale: complete lot only Location: Slovakia, EU The cylinders have never been installed or used, but have been stored for approx. 20 years. Due to the long storage period, inspection and possible replacement of seals before industrial use is recommended. Suitable for maintenance departments, machinery builders, automation companies, spare parts stock or industrial equipment dealers. Sold as shown in the photos. Loading possible. Worldwide shipping on request. Zum Verkauf steht ein kompletter Industrieposten mit 27 Stück originalen FESTO DNG-160 Pneumatikzylindern. Hersteller: FESTO Modell: DNG-160 Menge: 27 Stück Typ: Pneumatikzylinder / Industrie-Aktuatoren Zustand: unbenutzte Lagerware / New Old Stock (NOS) Alter: ca. 20 Jahre gelagert Funktion: nicht einzeln getestet Verkauf: nur als kompletter Posten Die Zylinder wurden nach unserem Kenntnisstand nie montiert und nie im Betrieb eingesetzt. Aufgrund der langen Lagerzeit werden sie jedoch ausdrücklich als ungetestete Lagerware verkauft. Eine Prüfung sowie ggf. der Austausch von Dichtungen vor industriellem Einsatz wird empfohlen. Geeignet für Instandhaltung, Maschinenbau, Automatisierungstechnik, Ersatzteillager oder Händler für Industriekomponenten. Verkauf wie auf den Fotos. Standort: Slowakei, EU. Verladung möglich. Versand auf Anfrage möglich.

Condition: used, CNC CONTROL Controller: C-Dias CLAMPING UNIT Clamping force kN: 4.200 Tie-bar clearance (H x V) mm: 820 INJECTION UNIT Injection unit size (Euromap): 2300 Screw diameter mm: 70 Max. shot weight (PS) g: 1.100 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 4 Hot runner control zones: 40 Hodpfez Alptsx Aitenu Handling robot (model / year): Wittmann DR 832 (2015) Robot strokes X / Y / Z mm: 900 / 1.600 / 2.500 Robot rotary axes (B / C): C servo 180° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 187 + 114

Condition: ready for operation (used), Indramat KDS 1.1-50-300-W1 / 220 AC servo controller, serial number 6059, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hjdpfx Aioz R Ikujtonu

Condition: excellent (used), For sale: Lukas hydraulic spreader, two-stage column jack. - LZR 12/300 - LZR 12/700 EN Hedpfoz Sk E Esx Aitsnu - In very good condition. - Price stated for the LZR12/300 jack: €450.

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) Hsdpfx Aioyzylvjtsnu 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: excellent (used), Different Heidelberg CTP Servo-controller for Suprasetter PL.570.3000-02 BERGER-LAHR Servo Controller for M3 drive motor for Suprasetter 74/75/105 Classic & A105 PL.572.3100-0x SCHNEIDER Servo Controller for Suprasetter A52/74/75 GEN. 1+2 PJ.105.100F/0x SCHNEIDER Servo Controller for Suprasetter A52/75 GEN. 3+4 (>2009) second-hand, tested All offer subject to prior sale Hsdezwfzxepfx Aitjnu

Condition: like new (used), functionality: fully functional, machine/vehicle number: 656377.1, overall weight: 170 kg, Nominal point diameter: 8mm Die depth: 1mm Dimension X: 0.90mm Dimension X min.: 0.8mm Dimension X max.: 0.95 Max. Pressing force: 55kN Deflection constant: 27.63 kN/mm Zero position: 95.8mm The clinching pliers from Tox Pressotechnik with servo drive have been specially developed for use in robot systems and offer a precise and efficient solution for joining sheet metal and materials. Hjdpfx Aou Tuqtsitenu With its modern servo drive technology, it enables a highly dynamic and controlled application that can be ideally integrated into automated processes. The pliers are characterized by their robust design and reliability, making them a durable and low-maintenance solution. Thanks to its flexibility and versatility, it is ideal for various industrial applications and helps to increase productivity and quality in manufacturing.

Condition: as good as new (ex-display), Year of construction: 2024, pressing force: 80 t, Equipment: documentation/manual, YAWEI SKE1-80 Precision Servo Press – 800 kN / 80 t - Stock Machine - Demo Machine - Available immediately For sale is a YAWEI SKE1-80 precision servo press from the manufacturer Jiangsu Yawei Machine Tool. This servo press is suitable for precise punching, forming, and pressing operations and, thanks to the servo drive, allows for freely adjustable motion and pressing curves. Speed, position, and the pressing process can be controlled precisely. Manufacturer: YAWEI / Jiangsu Yawei Machine Tool Model: SKE1-80 Pressing force: 800 kN / approx. 80 t Ram stroke: 150 mm Idle stroke rate: max. 65 strokes/min Working stroke: 6 mm Max. tool installation height: 330 mm Ram adjustment: 80 mm Ram area: 560 × 460 mm Hjdpfx Aijzyamzjtonu Table area: 1,000 × 600 mm Table thickness: 120 mm Operating pressure: 0.55 MPa Peak torque: 4,000 Nm Drive: Servo motor / Gear drive

Condition: used, Second-hand SKF linear actuator, type CARE 33M20041101000024 / Motorised jointer adjustment suitable for Weinig planers. Linear actuators are required, amongst other things, for automatic jointers. Tested and in working order. Hnedpfx Aijz Hllmjtju Technical data: - Stroke: 200 mm - Voltage: 24 V

Condition: used, Hydraulic valve, servo valve, proportional valve Hydraulic servo valve, continuously variable valve, PARKER DFplus type D3FPE02YC9NB00 20 Manufacturer: Parker Hannifin GmbH Operating voltage: 24 VDC Operating pressure: max. 350 bar Length = 245 mm Width = 70 mm Height = 155 mm Weight: 6.2 kg Good condition Hjdpfx Ajz Eu E Hjitenu

Condition: excellent (used), Year of construction: 2014, - Accessories included. - Control system: WEILER C3 based on Siemens SINUMERIK 840D WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Hodpfjztxq Esx Aitonu Swinging diameter over cross slide 160 mm Distance between centers 750 mm TURRET Turret head DIN 55027/DIN ISO 702-3, size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60%/100% ED 9/7 kW Speed range 1 – 4,500 rpm Number of speeds stepless FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Transverse 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force transverse 3,000 N Max. rapid traverse speed longitudinal/transverse 6/3 m/min THREAD CUTTING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 threads/inch TAILSTOCK Tailstock spindle diameter 50 mm Tailstock quill stroke 110 mm Internal taper DIN 228 MK 3 mm

Condition: used, functionality: unexamined, machine/vehicle number: SAF 30NC, Used AMG-PESCH SAF 30NC pneumatic actuator with valve Manufacturer: AMG-PESCH GmbH Hjdexp H Evjpfx Aitjnu Model: SAF 30NC With Festo vsnc-fc-m52-md-n14-f8 “solenoid valve” For sale per set

Condition: ready for operation (used), Description: Geiger MiniServo II 1.5, a servo-motorized demolding device or sprue picker, used on an ARBURG 270 S injection molding machine. The device is designed to precisely and quickly remove sprues or small molded parts from the mold and place them aside. Swivel axis (A): 0-105° Demolding stroke (X): 300 mm with linear guide and rack and pinion Vertical/lateral stroke (Y/Z): 800 mm linear guide and rack and pinion (part and gripper weight up to max. 1.5 kg) Servo-motorized drive of the main axes Fail-safe mechanism (Y): electromechanical Sliding console Gripper F Rotary module B (pneumatic) with stop 1 compressed air circuit for gripper 1 compressed air circuit for rotary module B 1 vacuum circuit with monitoring Gebtkoy Tn Rdsqqtioiu Programming assistant for programming standard demolding sequences with 1 pressure and 1 vacuum circuit Interface connection Euromap 67 (standard) Interface and power cable 5 m Deposition area behind and in front of the machine RAL 9016 white Additional control HT7, vacuum circuit, and consoles Input voltage: 230 V Hsdpszpzhrsfx Aitenu Since I was unable to observe the device in operation, I cannot provide a guarantee. According to maintenance records, it is in good working order, but it stalled once or twice a week. Switching the main switch off and on again would resolve the issue. Therefore, it is not suitable for continuous operation. I am selling it as a spare parts unit.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, !! Parts in mint condition with warranty!! Price between €300-1000 each. Hnodpoucwzaofx Aitju Over 40 motors and controllers available. A list of the items is available upon request. We would be happy to advise you!

Condition: new, For sale: high-quality industrial Siemens SIMOTICS motor. Condition: new, unused, original packaging (warehouse stock, may show slight marks from storage). 🔧 Technical data: Manufacturer: Siemens Model: 1FE1093-6WU11-1BN2-Z Serial number: YFJ86378498 001 Type: 3-phase motor (servo / torque motor) Voltage: 425 V Current: 43.0 A / 60.0 A Power: 16.8 kW / 21.5 kW Rated speed: 1600 rpm Max speed: 7000 rpm Hsdpfx Aisz Smigetonu Max torque: 165 Nm Rated torque: 86 Nm Protection class: IP00 Insulation class: 155 (F) Duty type: S1 Cooling: water-cooled (8 l/min, max 25°C) Standard: EN 60034 Temperature sensor: KTY84-130 📏 Construction: direct drive (torque motor) high-precision manufacturing intended for industrial applications without gearbox 💡 Applications: CNC machines drive axes industrial automation production lines 📦 Included: Siemens motor original packaging

Condition: used, For sale: a Haas Servo Bar 300 bar feeder. It has been unused for over 10 years due to lack of space. Hnsdpjzt Tmujfx Aiteu

Condition: new, I am offering a brand new Siemens SIMOTICS motor (1FE series) – a professional servo/spindle motor designed for inverter duty. This is a high-grade industrial motor, commonly used in CNC machine tools, delivering high power, precision, and reliability. The motor comes from warehouse stock (New Old Stock – NOS), unused and stored in original Siemens packaging. ⚙️ Technical Data Manufacturer: Siemens Series: SIMOTICS Model: 1FE1114-6WW11-1BN2-Z-T56 Power: 20.9 – 26.8 kW Voltage: 425 V Current: 58 / 85 A Nominal speed: 1000 rpm Max speed: 6000 rpm Max torque: 330 Nm Duty cycle: S1 / S6-40% Cooling: water-cooled Temperature sensor: KTY84-130 Protection rating: IP00 Insulation class: F (155°C) 📦 The set includes: Siemens SIMOTICS motor Original Siemens packaging (as shown in the pictures) Hnedpfsz Sl Diex Aitsu 📌 Key advantages: ✔️ Condition: NEW (warehouse stock / NOS) ✔️ Made in Germany ✔️ Genuine Siemens industrial quality ✔️ Ideal for CNC / machine tools / automation ✔️ High power and torque