Used Sem Fl 58 Mc for sale (9,327)

Condition: new, maximum load weight: 48,930 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * with beveled front corners, approximately 45° and with rear bevel approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading platform * in a double-extendable design with rear bevel approximately 500 mm x 8° * 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 4 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table, approximately 250 mm * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 245/70 R 17.5 3PMSF, load index (146/146 F) * TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with a 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * according to EU regulations with EBS-E (4S3M) Steel structure * made of high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting * Complete steel structure automatically blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system * Rims in silver. Rear part metallized and painted in RAL 9010 (pure white) * Metallic paint is not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment Lodpfezlwm Asx Afterp 2 inch kingpin * Electro-hydraulic unit (± 45 kg) * Follow-up steering from the front and rear, controllable by means of a cable remote control via push buttons, with single-axle control (without installation in the central control unit) * One bracket for warning signs on the left and right of the gooseneck and on the rear panel, including socket * One bracket for a rotating beacon on the rear of the trailer * Aluminum side panels and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable. (Length of the superstructure approximately 2,560 mm) (± 46 kg) * A tool box, galvanized, integrated into the beveled gooseneck (± 47 kg) * 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40 or a 45' container (± 40 kg) * 7 pairs of stake pocket for stake pockets approximately 100 x 50 mm in the outer frame of the loading platform (± 21 kg) * Extensions, galvanized

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, Excerpt of Equipment Gooseneck * with angled front corners approx. 45° and rear angle approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood decking approx. 30 mm thick Loading Platform * in double-extendable design with rear angle approx. 500 mm x 8° * 6 pairs of lashing rings that fold outwards (LC 5,000 daN) * 4 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings positioned horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood decking approx. 48 mm thick, with diamond plate decking over the axles * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Lrsdpfx Afozlwm Njtjp Tires * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Kingpin * JOST kingpins (mechanical) with 2-speed gear for approx. 24 t lifting capacity (approx. 50 t test load) Braking System * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the semi-trailer tractor Painting * First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) * Topcoat, single color in RAL 3002 carmine red * Rear section metallic and painted in RAL 9010 (pure white) * Metallic paint not possible Steel Construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15 pole * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front panel, approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with holder on the front panel (± 5kg) * A spare wheel holder in front of the front panel * Electro-hydraulic power unit (± 45kg) * Steering from the front and rear by means of cable remote control operated via push buttons, with single-axle control (without installation in the tractor unit) * Mounting at the rear of the gooseneck for aluminum loading ramps * European reflector plates (red-yellow) at the rear of the trailer * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * On the gooseneck and at the rear panel, one holder each on the left and right for warning signs including socket * Mounting rail for aluminum loading ramps at the rear of the vehicle * A holder for a rotating beacon at the rear of the trailer * Galvanized folding supports under the angle of the loading platform * A mud flap at the rear of the trailer * Manual and description on USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining the axle loads including load diagram.

Condition: new, maximum load weight: 46,800 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * Gooseneck with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Extendable platform * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 3 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings, lying horizontally at the front of the platform (LC 10,000 daN) * Recesses in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with non-slip steel plate flooring over the axles Axles * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool kit * Tires * 245/70 R 17.5 3PMSF * Load index (146/146 F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Kingpin Lodpfx Aszk S Dmefterp * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * in accordance with EU regulations with EBS-E (4S3M) Paint finish * Complete steel construction automatically blasted with a blasting wheel system after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red according to the RAL 841GL system * Rims in silver gray. Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting * 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pole sockets * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * Electro-hydraulic unit (± 45kg) * Steering from the front and rear via cable remote control, operated via push buttons, with single-axle steering (without installation in the central beam) * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) (± 3kg) * On the gooseneck, aluminum side boards and rear wall, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable. (Length of the structure approximately 2,560 mm) (± 46kg) * A galvanized toolbox, integrated in the beveled gooseneck (± 47kg) * 3 pairs of WADER container pockets in the platform for a 20' (30?) or a 40? container (± 30kg) * 6 pairs of stake pockets for plug-in stakes, approximately 100 x 50 mm, in the outer frame of the platform (± 18kg) * Extensions, galvanized, extendable by app

Condition: used, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck: - with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approximately 30 mm thick Loading platform: - in extendable design with rear taper of approximately 1,000 mm x 8° - 5 pairs of lashing rings that fold outwards (LC 5,000 daN) - 3 pairs of lashing rings that fold outwards (LC 10,000 daN) - 1 pair of lashing rings lying flat at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) - Hardwood flooring, approximately 48 mm thick - Diamond plate flooring over the axles Kingpin supports: - JOST kingpin supports (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tires: - 235/75 R 17.5 3PMSF Axles: - BPW axles, two fixed axles, two steered axles, air-sprung Lrjdpfxezkx Hue Aftjp - with drum brakes with lifting/lowering function - The steered axles with electro-magnetic reverse lock can be activated via reverse gear or manually Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork: - High-quality 2-component (2K) topcoat in a single color, RAL 3002 carmine red Accessories: - One spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high - Yellow-red air couplings on the galvanized connection strip at the front - 4 wheel chocks with holder on the front wall - Mount at the rear of the gooseneck for aluminum loading ramps - Galvanized folding supports under the taper of the loading platform - One holder for a rotating beacon at the rear of the trailer - Yellow reflector tape in accordance with EU regulations on the side, on the extension, and at the rear of the trailer - One holder for warning signs on the left and right sides of the gooseneck and rear panel, including socket - Load scale to determine axle loads, including load diagram Includes special accessories: - Aluminum side and rear walls on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) - One galvanized toolbox, integrated in the tapered gooseneck - 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' container - Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle - 6 pairs of stake pockets for pluggable stakes, approximately 100 x 50 mm in the outer frame of the loading platform - Extensions, galvanized, extendable by approximately 230 mm on each side - Lift axle on the front axle with control via TEBS E - 2 LED reversing lights mounted on the rear panel - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - An acoustic warning signal when reversing - HRM metallization (High Resistance Metallization)

Year of construction: 2016, condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available Loded Aqtrjpfx Aftjrp -Price: per piece -Weight: 15.4 kg/piece

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 2500 rpm -Power: 4.5 Nm -Design: B14 Lodocv Siqopfx Aftjrp -Shaft diameter: Ø 16 mm -with Hohner encoder 267AB -Number: 1 motors available -Price: per piece -Dimensions: 400/100/H145 mm -Weight: 9.3 kg

Condition: used, DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: SEM, DC gear motor Lrsdpfetrzphox Aftsp -Type: DPM30E4 -Voltage: 36 V -Speed: 70 rpm -technical data: see photo type plate -Shaft: Ø 30 x 50 mm -Dimensions: 430/150/H130mm -Weight: 14.3 kg

Condition: good (used), PLC control, compact device Ljdpfscar Aijx Aftorp -Manufacturer: SIEMENS -Type: Simatic S5-95U 6ES5 095-8MC01 -Number: 1 module available -Dimensions: 145/135/H140 mm -Weight: 1.34 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: SEM, Brushless servo motor type HR142G6-88S Ljdpfx Aehu Hwqofterp -Speed: 6000 rpm -Voltage: 530 V -Torque: 21 Nm -Shaft: Ø 24 x 50 mm -Brake: 24 VDC 40 Nm -Number: 2 motors available Price: per piece -Dimensions: 425/142/H174 mm -Weight: 23.8 kg/pc.

Condition: good (used), PLC control, central module, memory, CPU, central device, central unit, compact device -Manufacturer: Siemens, compact device Simatic S5 with memory card -Type: 6ES5 095-8MC01 -Quantity: 1 piece available Lrsdpfx Ajh A Sb Noftjp -Dimensions: 130/90/H135 mm -Weight: 1.4 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 2500 rpm Lodocwb Nrjpfx Aftjrp -Power: 4.5 Nm -with gearbox ratio: 1:10 -Design: B14 angle -Shaft diameter: Ø 25 mm -with Hohner encoder 11322 -Quantity: 1 motor available -Price: per piece -Dimensions: 480/260/H180 mm -Weight: 10.3 kg

Condition: good (used), PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 Lredpfx Ajrb E Ewoftop -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Condition: used, Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 Lrodpfxjttnt Io Aftjp -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

Condition: used, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: SEM Andras, brushless servo motor type HR115A6-88S Lsdpfjhu Hxcex Aftorp -Speed: 6000 rpm -Voltage: 530V -Torque: 3.7 Nm -Shaft: Ø 19 x 40 mm -Brake: 24VDC 10Nm -Number: 2 engines available -Price per piece -Dimensions: 275/115/H145 mm -Weight: 7 kg/pc.

Condition: excellent (used), mileage: 673,000 km, power: 302 kW (410.61 HP), first registration: 03/2008, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: red, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: other, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, loading space length: 6,500 mm, loading space width: 2,500 mm, Year of construction: 2008, Equipment: ABS, Bluetooth, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, power assisted steering, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - High beam - Refrigerator - Air-suspended seats - Air horn - Radio/CD player - Sun visor - Toolbox - Central lubrication system - Towing hitch = Notes = 8x2 Lrodpfx Afjzi Emljtop Euro 5 Last axle: lift/steering axle Flatbed length 6.50 m Twistlocks Flatbed height 1.08 m Hiab 1055 E-8 HiPro + Fly Jib 175 X 5 JDC 8x hydraulic extension Fly jib with 5x hydraulic extension Total working height approx. 33 m Radio remote control 4-point outriggers Dutch registration Inspection valid until 10-10-2026 In very good condition! Ready for immediate use = Further Information = Axle configuration Front axle 1: Max. axle load: 9,000 kg; Suspension: leaf spring Front axle 2: Max. axle load: 9,000 kg; Suspension: leaf spring Rear axle 1: Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered; Suspension: air suspension Weights Unladen weight: 27,770 kg Payload: 4,230 kg Gross vehicle weight: 32,000 kg Functional CE marking: yes Condition Technical condition: very good Optical condition: very good

Condition: new, axle configuration: 3 axles, loading space length: 12,500 mm, loading space width: 24,800 mm, total length: 130 mm, total width: 24,800 mm, color: white, Year of construction: 2024, = Additional options and accessories = - Transportation = Remarks = = Additional options and accessories = - Leaf spring suspension = Remarks = The CIMC 3-axle Flatbed Semi-Trailer is a robust and versatile trailer designed to transport large, heavy or irregularly shaped loads. With three axles, this trailer offers excellent stability and carrying capacity, which is essential for transporting construction materials, machinery, containers and other heavy loads. CIMC is known for its innovative designs and reliable products, and the 3-axle Flatbed Semi trailer is no exception. Specifications: - Number of axles: 3 axles for extra stability and higher load capacity. - Load capacity: Up to 60,000kg for various purposes. - Chassis: Made of high-quality steel for maximum strength and durability. - Superstructure: Flat floor without raised edges. - Suspension system: Mechanical or air suspension systems for a stable ride and better load distribution. Features and benefits: High load capacity: - The 3-axle configuration provides excellent weight distribution and increases load capacity. - Ideal for heavy and bulky loads such as construction machinery, containers, and industrial equipment. - Durable construction: The chassis is made of high-grade steel, enabling the trailer to withstand tough conditions of daily use. - Advanced welding technology ensures a sturdy and reliable construction, significantly extending the trailer's service life. Applications: The CIMC 3-axle Flatbed Semi-Trailer is ideal for various applications such as: - Construction sector: Transportation of heavy construction materials, machinery and equipment - Logistics and distribution: Transport of containers, pallets, and irregular loads - Oil and gas industry: Transport of heavy and bulky equipment - Automotive industry: Transportation of vehicles and large machinery Dimensions: L. 12500mm W. 2480mm H. 1200mm Weight 8,400kg+- 5% This CIMC 3-axle Flatbed Semi-trailer offers a robust and flexible solution for companies in need of a versatile and reliable trailer for transporting heavy and irregular loads. Excellent stability, durability and the ability to adapt to specific loads make this trailer a valuable addition to any fleet. Only for export outside the EU. = More information = Tyre size: 315/80 R 22.52 Make of bodywork: CIMC ZJV9403JP General condition: very good Ledpfxjy Rt R Ds Aftsrp Technical condition: very good Visual appearance: very good Damages: none = More information = General information Year of manufacture: 2024 Weights Empty weight: 8.400 kg Carrying capacity: 60.000 kg GVW: 68.400 kg Other information Tyre size on axle 1: 315/80 R 22.52 Suspension on axle 1: parabolic Tyre size on axle 2: 315/80 R 22.52 Suspension on axle 2: parabolic Tyre size on axle 3: 315/80 R 22.52 Suspension on axle 3: parabolic Rent kmly price currency: EUR

Condition: used, maximum load weight: 36,540 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 07/2028, Year of construction: 2020, Equipment: ABS, Internal vehicle number: G400133 Available immediately at our location in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Low-loader LANGENDORF SATÜ 30 – 10.0 m with wheel recesses Year of manufacture: 2020 Remote control 3 axles – 2 steered – 1 liftable Length: 13,900 mm Loading area: 10,000 mm Technically permissible total weight: 48,500 kg Unladen weight: 11,960 kg Financing example: * Internal number: G400133 * Purchase price: €59,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €925.02 * Residual value: €11,380.00 If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). Lrodoy A Uxajpfx Aftop We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: ready for operation (used), SEM MT30F4-52 Ferrite Brushed DC Servomotor SN:J13270 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Ljdpfx Aot S Al Djftjrp

Condition: ready for operation (used), SMW Autoblok SRG 2 FC grinding steady rest ID 224080 SN 1582130100,used, good condition, 100% working, scope of delivery as per photos Ledpoxah D Usfx Afterp

Condition: ready for operation (used), Walter Flender Type: TN3B/4 14 Motor SN:A49058323, used, normal signs of wear, 100% functional, as per photos included Lsdex Dwh Depfx Aftorp

Condition: ready for operation (used), SMW Autoblok SRG 1C grinding bezel ID 225020 SN 1582110102 ,used, good condition, 100% working, scope of delivery as per photos Lodoxah Duspfx Aftjrp

Condition: ready for operation (used), SEM MT30U4-57 Permanent Magnet DC Servomotor SN:F03088, used, normal signs of use, 100% functional, scope of delivery as per photos Lredpjt S Ambofx Aftep

Condition: ready for operation (used), SEM MT30Z4-85 Ferrite Brushed DC servo motor SN:L9813 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Lrodot S Anxjpfx Aftep

Condition: ready for operation (used), Siemens 1FT6105-8AF71-3EH1 servo motor, serial number: YFL4614261701001, with AM2048S/R F35 encoder and 24VDC, 31W, 70Nm brake, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lodpfx Ajzbgdwoftorp

Condition: ready for operation (used), Tool spindle housing with Widaflex UT50 264.82.905 7H N-263.66.251 spindle, hole spacing of the fastening holes on the housing: 185 x 200 mm, hole spacing of the fastening holes on the drive side: 151 x x155 mm, Ø holder for drive: 32 mm, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Lodpfx Asy Rcpcjfterp