Used Schoen Unh-700 for sale (5,898)

Condition: good (used), Year of construction: 2007, DADAUX SLICO 700 Cutlet Slicer • Control panel protected with a cover against water ingress. • Textured loading surface prevents excessive friction of products intended for cutting. • Fully constructed from INOX 1810 • Hinged doors • 1 speed: 160 cuts/min • Adjustable cutting thickness from 0 to 40 mm • Electric feed system • Stepwise feed system • Cutting thickness adjustable during operation • Automatic pusher return • Suitable for high-pressure washing Laodpjxx Tbpofx Aftsd • CE compliant

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Lasdpfx Aelmmwrjftod

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm Laodpfxjfcw Apo Aftsd width 1100mm depth 1500mm

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm Laodpfx Afslp Uz Uetjd ram surface 320 mm table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation Lasdpfx Afstiwgietod

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm Laodpfslp Uz Rjx Afted total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with 650 kN capacity. The machine was last in operation about 8 years ago. At that time, it had an issue with a hydraulic pipe (possibly a hydraulic oil leak or a leaking fitting). This was not repaired since the press was no longer needed. Otherwise, the machine had been running flawlessly up to that point. The press does not have UVV certification! Ljdjx Ehmyepfx Aftoad

Year of construction: 1978, condition: used, pressure 25 t stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm Lsdpfxslp U A Io Aftoad hole in the table 160x100 mm table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Year of construction: 1976, condition: used, pressure 250 t distance between columns 900 mm stroke 300 mm table surface area 850x900 mm ram surface 800x880 mm Ledpfx Afolp U A Setead stroke 300 mm table height 1050 mm

Year of construction: 1976, condition: used, pressure 100 t distance between columns 625 mm stroke 150 mm table surface area 580x450 mm ram surface 580x340 mm hole in the table Ø 150 mm table height 850 mm tool hole in ram Ø 45 mm column travel -side 200x200 mm Lasdpolp U Eujfx Aftjd weight of the machine ca. ca. 6,0 t dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm

Condition: used, Year of construction: 1978, pressure 7 t throat 180 mm stroke 100 mm table surface area 300x300 mm ram surface Ø105 mm hole in the table Ø60 mm table height 1050 mm Ledpfx Afjvnwfbetead tool hole in ram Ø30 mm total power requirement kW dimensions of the machine ca. BxTxH 1200x1200x2100 mm

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Laedpfx Ajx Ehlcjfted

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety Laodpfx Aox Ry Nyoftod 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Condition: used, Year of construction: 1980, pressure 20 t distance between columns 450 mm stroke 100 mm table surface area 440x320 mm Lajdpevnwd Dsfx Aftsd ram surface Ø140 mm hole in the table Ø50 mm table height 900 mm tool hole in ram Ø40 mm total power requirement 3 kW weight of the machine ca. 2 t dimensions of the machine ca. BxTxH 1400x1200x2200 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Lasdpfx Afsx Eirqetsd Year of production: 2010 Serial number: 214430 Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Screw diameter: 18 mm

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Lasdpfxjxy Styj Afted Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Ledpfewd Szbjx Aftsad Weight approx. 2800 kg Good condition

Condition: excellent (used), Year of construction: 2003, WELL-MAINTAINED MACHINE FROM A HOBBY WOODWORKING SHOP Table dimensions: 990 x 750 mm Router spindle diameter: 30 mm Router spindle speed: 3,700 / 6,500 / 7,890 RPM Diameter of router tool, max.: 230 mm Router spindle can be tilted: 0 - 45 degrees Router spindle height above table, max.: 120 mm Motor: 5.5 kW Lasdpfx Asznk Ilsfted Router spindle can be switched for clockwise/counterclockwise rotation Sliding table with additional table support Additional extraction hood as a replacement for the fence, e.g., for sanding Hold-down device / safety system, e.g., when routing narrow parts Weight: approx. 540 kg Dust extraction connections: 1 x 120 mm, 1 x 80 mm Optionally available: 3-roller feed device FELDER F-34, item no. 4754

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is a Felder F 700 table router in high-quality industrial design, including a Felder F38 3-roller feed system. The machine impresses with its robust construction, powerful drive, and precise adjustment options, making it ideal for professional use in carpentry and joinery workshops. Technical data: Manufacturer: Felder Type: F 700 Year of manufacture: 2012 Lasdpfx Afezm Rzistsd Motor power: 7.35 kW Voltage: 400 volts Frequency: 50 Hz 3-phase design Router spindle adjustable by 45° Electronic height adjustment with digital display (mm/inch) Speed levels: 3,500 / 6,500 / 8,000 / 10,000 rpm Made in Austria Equipment: Felder 3-roller feed system F 38 Swivel and height-adjustable feed system Sliding table Table extension Solid aluminum router fence Precise router fence adjustment Large cast iron table Digital display for router height Swivel indicator for the router spindle Emergency stop switch Professional industrial design The machine is in good used condition and shows only the usual signs of wear and tear due to age and use. It is ideally suited for daily professional use. An inspection and test run are possible at any time by appointment. Transportation is possible for an additional charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Lodpoxbgg Rsfx Aftsad

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Lajdpfsxctw Sjx Afted

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Laodpfxoxcty Ts Afted

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Ljdpfx Aexbgfmsftsad

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Lasdpjxbgfgsfx Afted

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Equipped with DMG MORI M730 UM MAPPS CELOS control system. Year of manufacture: 10/2017, Commissioned: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Counter spindle speed range: 4500 rpm Driven tool speed range: 10000 rpm Including the following accessories: Work area door with interior lighting 20-position turret with 20 driven stations C-axis, Y-axis Touch probe (Marposs) Counter spindle, parts catcher Workpiece conveyor, workpiece unloader Ledpszmfxiofx Aftsad Manual tool presetter (HS) Removable tool presetter (GS) 3-jaw chuck, hydraulic, Kitagawa BB 210 with foot pedal (HS) 3-jaw chuck, hydraulic, Kitagawa B 208 with foot pedal (GS) Bar loader IRCO BREUNING ILS - MUK Various tool holders, 0-40 mm Direct path measuring system, X, Y, Z axes Signal lamp, 4-color Chip conveyor High-pressure coolant system with compact filter unit, 70 bar / 700 l tank Operating manuals