Used Schüco Profile Machining Center for sale (71,842)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 15744, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, table load: 1,500 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Table length: 1,000 mm Table width: 560 mm Table load capacity: max. 1,500 kg Spindle mount: HSK63 Spindle speed: 10,000 rpm Tool changer: 30 positions Rapid traverse: 35 m/min Acceleration: 5 m/s² MACHINE DETAILS Ncjdszcymzepfx Alneu Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,500 x 2,800 mm Weight: 7,200 kg Total connected load (including coolant pump): 42 kVA

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. Nedpezcuyijfx Alnscu EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,297 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! In January 2025, a new spindle was installed by the manufacturer! The machine has been regularly maintained! Previous use: The machine was primarily used for precision machining. Roughing operations were only carried out to a limited extent. TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 2,200 mm Travel range Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) Vertical: 10,000 rpm Spindle speed S1 (continuous operation) Universal swivel head 2-axis: 18,000 rpm Vertical milling head: TVS 10,000 Swivel milling head: TU 18,000 Tool holder: HSK 63 A Tool changer: 40 tool positions MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (-15 %, +10 %) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 99,222 h Program run time: 61,297 h EQUIPMENT High-rigidity gantry design Precise linear guides and ball screws Generous working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Swiveling milling head with 4th/5th axis Maintenance and service documentation Ncedpozb D Aqefx Alnsu

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates the bidder to collect the machine on schedule in week 30 of 2026! TECHNICAL DETAILS Travel range X-axis: 1,000 mm Travel range Y-axis: 900 mm Travel range Z-axis: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° Ncodpfx Ajzd Tapjlnsu MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools 2 pallets Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 2,500 mm Travel in Y-axis: 920 mm Travel in Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Shipping packages: 3 EQUIPMENT External coolant system Chip conveyor Ncsdpfx Alozdkhkonou Tool magazine (30 pieces)

Condition: ready for operation (used), Year of construction: 2009, operating hours: 3,275 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine with only 3,275 spindle hours! TECHNICAL DETAILS Travel in X-axis: 1,100 mm Travel in Y-axis: 600 mm Travel in Z-axis: 510 mm Table size: 1,300 x 600 mm T-slots: 6 (size 18) Nedpezdkgaefx Alnjcu Maximum table load: 1,000 kg Spindle speed range: 60 - 12,000 rpm Drive power: 10 / 17 kW Spindle mounting: ISO 40 / DIN 69871A Magazine: 32 positions MACHINE DETAILS Drive power: 10 / 17 kW Internal cooling (IKZ): 20 bar Coolant tank volume: 480 l Spindle hours: 3,275 h Machine operating hours: 15,883 h Control operating hours: 17,706 h

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 216327, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Ncedpfxezdf Dhs Alnou Travel range, Z-axis: 510 mm Table length: 2,000 mm Table width: 510 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Control system: Mazatrol 640M Operating time according to control system display: 40,843 h Dimensions & Weight Dimensions (L x W x H): 5,120 x 3,000 x 2,800 mm Unladen weight: 8,250 kg EQUIPMENT Chip conveyor Tool magazine with 30 positions Tools included

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 18966, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area, X-axis: 3,309 mm Working area, Y-axis: 1,703 mm Working area, Z-axis: 120 mm Table length: 3,100 mm Table width: 1,500 mm Ncodjzdy S Sspfx Alnsu Number of milling spindles: 1 Number of controlled axes: 3 Tool clamping system: HSK-F63 Tool changer positions: 12 MACHINE DETAILS System/Software: BiesseWorks Capacity: 360 m³/h Connection diameter: 70 mm Vacuum: 300 bar Main motor power: 11 kW Power consumption: 24 A Power: 14.2 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,350 x 2,000 mm Empty weight: 1,530 kg Transport packages: 2 Vacuum pump Busch MM 1322 A VM8 Year of manufacture: 2012 Main motor power: 6 kW EQUIPMENT CE marking CE certificate Documentation (Electrical diagrams, parts list, technical data, user manual (NL, paper form)) Safety fence, safety light curtain Milling table: Flat table Material clamping system: Pneumatic

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015406, functionality: fully functional, operating hours: 14,808 h, working width: 1,300 mm, spindle speed (max.): 24,000 rpm, working height: 200 mm, working length: 3,110 mm, No minimum price – guaranteed sale to the highest bidder! The machine is still in operation and can be inspected while powered on. TECHNICAL DETAILS Working area X-axis: 3,110 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Maximum travel X-axis: 3,500 mm Maximum travel Y-axis: 1,815 mm Nedpfx Aszdy E Sslnscu Maximum travel Z-axis: 440 mm Table length: 3,050 mm Table width: 13 mm Number of milling spindles: 1 Spindle speed: 600 - 24,000 rpm Number of controlled axes: 5 Horizontal drilling spindles: 6 Vertical drilling spindles: 12 Tool changer positions: 16 MACHINE DETAILS Main motor power: 11 kW Main motor power of the vacuum pump: 5.5 kW Capacity of the vacuum pump: 250 m³/h Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,450 x 2,850 mm Installed dimensions (L x W x H): 4,600 x 6,500 x 3,400 mm Shipping dimensions: 9,000 x 2,450 x 2,850 mm Empty weight: 4,000 kg Shipping packages: 1 unit Operating hours: 14,808 h EQUIPMENT Milling table: Beam table Tool clamping system: HSK-F63 Material clamping system: Pneumatic Drilling tool Saw unit System/Software: Xilog plus Safety feature: Safety mat Vacuum pump: Becker CNC options: Chip conveyor, Hand control CNC documentation: User key/licenses

Condition: ready for operation (used), operating hours: 41,072 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Travel in X-axis: 630 mm Travel in Y-axis: 560 mm Travel in Z-axis: 560 mm Spindle speed: 12,000 rpm Feed rate: 20-10,000 mm/min Rapid traverse rate X/Y/Z: 26/26/20 m/min Number of positions in tool changer: 20 Spindle mount: SK 40 Table surface area (L x W): 1,000 x 600 mm MACHINE DETAILS Nodpozd Aw Dofx Alnjcu Control system model: Heidenhain TNC 430 Total power consumption: 26 kW Operating hours: 41,072 h Machine weight: approx. 6.5 t EQUIPMENT B-axis (NC milling head) Electric handwheel Chip conveyor Cooling system

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,662 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 620 mm Travel range, Y-axis: 520 mm Travel range, Z-axis: 460 mm C-axis: 360° B-axis: -50° / +110° Rotary table diameter: 500 mm Spindle speed (max.): 12,000 rpm Spindle type: SK40 Number of spindles: 1 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Operating hours (see image) Ncjdszd Aitspfx Alnsu Control system operating hours: 38,569 h Machine operating hours: 37,263 h Spindle operating hours: 15,662 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Scraper-type chip conveyor Workpiece measuring probe Coolant system Compressed air via M-command Heidenhain handwheel Kinematic optimization cycle Note: The machine is sold without tools, vise, and clamping plate.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,316 h, functionality: fully functional, machine/vehicle number: 11080297, travel distance X-axis: 1,100 mm, travel distance Y-axis: 585 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 585 mm Travel range, Z-axis: 600 mm Spindle speed (max.): 8,000 rpm Spindle type: SK 40 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Input voltage: 400 V Total weight: 7,000 kg Operating hours (according to image) Control system operating hours: 42,480 h Nsdpfxjzd Aigs Alnocu Machine operating hours: 38,123 h Spindle operating hours: 12,316 h EQUIPMENT Documentation/Manual Chip conveyor Electronic handwheel

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,877 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Nsdpfozcla Hjx Alnocu Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Maximum spindle speed: 8,000 rpm Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Number of tool positions in the tool magazine: 60 Tool length: 500 mm Tool diameter: 120 mm Tool weight: 30 g Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16065, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 16,000 rpm, The seller can handle the disassembly and loading for €1,250! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 500 mm Spindle speed: 16,000 rpm Tool holder: SK 40 Milling spindle diameter at the front bearing: 70 mm Table clamping surface: 1,400 x 900 mm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Nodpfx Aszdttpjlnecu EQUIPMENT Tool changer

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Ncedpfjzd Tcdjx Alnou Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm Nsdpfoyr Utnox Alnscu _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain iTNC 530 Travel ranges X/Y/Z: 2200 x 560 x 720 mm Spindle speed: 18,000 min-1 Clamping area: 2600 x 600 mm Nodpfozg Nmkjx Alnecu Max. table load: 2200 kg Swiveling head Coolant pressure: 25 bar Tool magazine for 30 tools, SK 40 Optional C or A axis Measuring probe: Heidenhain TS 640 Chip conveyor Paper band filter

Condition: used, Year of construction: 2009, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Siemens ergoline Nodpfx Alotxctvonjcu table surface area 2x 790 x 560 mm number of pallets 2 rapid traverse 30 m/min turning speed range 18000 U/min power capacity - milling spindle 13 kW no. of tools in the magazine 30 Stück tool taper SK 40 | | weight 5,2 t dimensions 3,1 x 2,1 x 2,7 m vertical machining centre wit 2x palettchanger, Equipment: - 2x palettchanger - chipconveyor - internal coolant - filter system - ext. hand wheel - laser tool setter - cableless 3D probe - oil dust collector - Siemens ShopMill dialog programming - Roto Clean - signal lamp - spindle oil cooler

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC Nodpfx Aovu U Itjlnocu SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2002, Control unit: HEIDENHAIN TNC426/430 Table dimensions: 2900 x 750 mm Table load: 2800 kg X-axis travel: 2300 mm Y-axis travel: 800 mm Z-axis travel: 600 mm Spindle-to-table distance: 10 - 740 mm Main spindle: 0 - 12,000 rpm (Motor spindle) Drive power: 25 kW Nsdpjy T Ht Dsfx Alnscu Taper: SK40 Tool magazine: 30 stations Max. tool diameter: D80 mm Max. tool length: 330 mm Max. tool weight: 15 kgs Weight: 13000 kgs Dimensions (L x W x H): 6500 x 3100 x 3100 mm Accessories / Equipment: - Coolant system - CTS (Coolant Through Spindle) - CELOX motor spindle - Chip conveyor Moving and loading costs are not included in the price. The machine has been technically checked and worn parts are exchanged by hungarian HEDELIUS service in 2022. Since then almost nothing used. The machine has produced plastic parts.

Condition: excellent (used), Year of construction: 2020, Traverses XYZ: 610 x 406 x 406mm, 400mm Diameter table, max table weight 226kg, table tilt +120°, -35°, 22.4kW, Ncsdpezg Enqefx Alnou 10000rpm, BT40, 30 station tool changer, coolant, swarf conveyor

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 540 x 540mm, Table 1120 x 540mm, Nsdpfxezg Enks Alnocu siemens 810 Control, 24 Station ATC, Spindle power 15Kw, 10,000rpm, BT40 Spindle, Coolant,

Condition: excellent (used), Year of construction: 2002, 5-axis CNC machining center 2006 Control: Heidenhain iTNC 530 Technical data: x-axis travel 880 mm y-axis travel 630 mm z-axis travel 630 mm Max. torque 130 Nm tool holder SK 40 (ISO 7388IIB) swiveling B: 103° Work table: Clamping surface 1,250 x 700 mm Rotary table diameter 700 mm rotatable C: 360 ° Max. table load approx. 500 kg T-slots 11x 14mm x 63mm Tool magazine: Number of tool places 32 (2x 16) pos. tool holder SK 40 (ISO 7388IIB) Max. tool diameter 80 / 130 mm Max. tool diameter with free neighbor box 160 mm Max. tool length 315 mm Ncjdpfxown A Sle Alneu Max. tool weight 8.0 kg

Condition: used, machine/vehicle number: 008272, Position 1: 5 Axis CNC Routers BIESSE + KUKA-ROVER A + KR210 R3100 Position 2: Robot BIESSE + KUKA-ROVER A + KR210 R3100 Njdpfx Ajx A Tfvjlnscu

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, in TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer: Heidenhain, type iTNC 530 >> Travels X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed rate continuously programmable up to X, Y, Z 20000 mm/min >> C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- and Z-axis 50 m/min >> X-axis 80 m/min (linear drive) >> B-axis 40 rpm >> C-axis 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping surface Ø 500 x 380 mm >> T-slot spacing 63/14H7 >> Table load 200 kg >> Dimensions and weight: approx. >> Machine without control and attachments >> Depth 3.0 meters, width 2.4 meters, height 2.6 meters >> Weight approx. 7000 kg >> Operating voltage 400 V >> Electric handwheel Heidenhain HR 410 >> Power connection 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extractor Ncodpozg Dnvefx Alnou >> IKZ 40 Bar >> Coolant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Compressed air supply to the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage detection >> Complete documentation The following work has been carried out: >> Main spindle overhauled >> Complete maintenance: All coolant hoses and pneumatic hoses renewed, filters new, fluids and belts renewed. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance report) About the machine: Offered is a Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain. The machine is in very good condition. The main spindle has been overhauled (replacement spindle) on the DMU, completely serviced, and an acceptance report has been created. Invoices for the overhaul of 42,000 Euros (net) are available. Take the opportunity to inspect and test the machine on site while it is powered up.