Used Sander Sander Multizon Ozone Generator 120 G/H for sale (81,138)

Condition: new, Newpower Generator proudly presents its NWK120 emergency generator with sound insulation. The generator is new, complete including control system, diesel tank, exhaust batteries, mesh speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Technical data: Codpevxfkmsfx Albjhb Model: NWK120 emergency generator with sound insulation Fawde Motor Newpower generator Engine: Fawde CA6DF2D-14D, 4 cylinders, water-cooled Generator: Newpower NW/N120 Continuous power: 80 kW / 100 kVA Maximum power: 89 kW / 120 kVA Connection: 4P circuit breaker, 1x5P 125A, 1x5P 63A, 1x5P 32A-, 2x5P 16A -, 2x2P 16A 250V sockets Frequency: 50 Hz Voltage: 400/230 V RPM: 1500 rpm. Control: Comap IL4 AMF8 Dimensions (LxWxH): 2970x1120x1310 mm Weight: 1609 kg Noise level (7m): approx. 81 dB Diesel tank: 280 L. (possibility of connection to external tank) 100% load approx. 19.2 l/h 75% load approx. 14.6 l/h 50% load approx. 9.8 l/h additional costs 250A automatic switch: € 1285.20 400A automatic switch: € 2665.60 Shipping: - Worldwide transport including unloading is possible for an additional charge - To be able to give an exact freight price, please send us an inquiry with your details and your full address

Condition: good (used), Year of construction: 1995, power: 22 kW (29.91 HP), pressing force: 120 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,000 mm, table height: 950 mm, retraction force: 5 t, total length: 2,100 mm, total width: 2,050 mm, total height: 3,800 mm, control cabinet height: 1,900 mm, control cabinet length: 600 mm, control cabinet width: 500 mm, installation height: 900 mm, Equipment: safety light barrier, Deep drawing press, press power 120 to, stroke 400 mm, distance between tabels 900 mm, with oil cooler, light security bareer, dimension 2100x2050x3800 mm, weight ca. 13400 kgs Chjdsycin Ujpfx Albsb

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available. Codpfx Ajwhvrrolbshb

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 1,800 mm, total width: 1,000 mm, total height: 1,250 mm, type of input current: three-phase, grinding belt length: 2,580 mm, grinding belt width: 150 mm, extraction connection diameter: 100 mm, VOLPATO LVO 120 Edge Sander Specification: • Condition – used, after inspection/service • Manufacturer – VOLPATO • Model – LVO 120 • Working height – 120 mm • Sanding belt dimensions – 150 x 2580 mm • Additional shaft, roller for sanding internal radii • One worktable adjustable at any angle from 0 to 90 degrees • Motor power – 2.2 kW • Mechanical belt tensioning and oscillation • Angle grinding attachment, angle gauge included • Extraction port – diameter 100 mm • Weight – 250 kg Chsdpfexuvgyjx Albsb • Year of manufacture – 2010 • Machine documentation in Italian • Overall dimensions: 180 x 100 x 125 cm (L x W x H) Additional information: • Very good, factory technical and visual condition • The photos shown reflect the actual item being sold • Possibility to connect and test the machine on site

Condition: used, Year of construction: 2013, machine/vehicle number: 2690/07, Mahr Perthometer PGK 120 Measuring range: 100 [x in mm] Max. load capacity: 10 kg with cross table Probe system: MFW-250 (measuring range: in z ±0.25 mm) Measuring principle: tactile-inductive Csdpsy D Eadofx Albshb Contact forces: 1–3 mN Probe: roughness probe (tip radius 2–5 µm, opening angle 60° and 90°)

Year of construction: 2019, condition: used, General Information The MobyLift is a practical tool for ergonomically lifting, transporting, and positioning products such as doors, table tops, and other panels. From an operational perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, and prevents back problems, thereby reducing work-related absences. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our expertise to create a practical tool. The MobyLift MC-120-H consists of the following modules: - Mobile base frame - Electric lifting and tilting system - Automatically operating vacuum unit - Wireless electric control The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into several portable modules after it is switched off. This makes it very convenient to load and unload the MobyLift or move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a battery level indicator, which allows the battery status to be continuously monitored. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilting angle, front to back: 37°, electrically operated - Swivel angle - head joint on both sides: 90° - Rotation angle - head joint: 360° continuous - Lateral displacement: 7 cm - Weight: 150 kg, can be disassembled into modules Chjdsv Dauwjpfx Albeb Storage location: Nattheim

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Codpjxzf Dzofx Albjhb Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, machine/vehicle number: 13658-25, fuel type: gasoline, motor manufacturer: GX 390, General information Field of application: Construction Weights Empty weight: 114 kg Functional Generator capacity: 7,2 kVA Dimensions of cargo space: 79 x 58 x 65 cm CE mark: yes Other information Fuel consumption: 2,7 Liter/Hour at 75% Load Generator: Linz E2W220DC Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery Water tank volume: 45 l Cedpfx Asxbwu Eslbjhb Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Tank

Condition: new, cutting diameter 220 mm saw band length 2450 mm cutting width 250 mm cutting speed 40 / 80 m/min dimensions of saw-band 2450 x 27 x 0,9 mm 100 mm 90 mm 90 x 90 mm 160 mm 160 x 110 mm 250 x 190 mm total power requirement 0,75 / 1,1 kW Chedpfxslb I A Se Albeb table height 925 mm weight of the machine ca. 218 kg dimensions of the machine ca. 1300 x 700 x 1530 mm

Year of construction: 2023, condition: new, The Newpower Generator proudly presents their new NWC77 emergency generator set with Cummins engine. The unit is new, complete including control, diesel tank, exhaust batteries, electric speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Technical specifications: Model: NWC77 emergency generator with sound insulation Cummins Engine Newpower generator set Engine : Cummins 4BTA3.9-G11, 4 cylinders Water-cooled and intercooler Generator: Newpower NW/N55 Continuous power: 56 kW / 70 kVA Maximum power: 61 kW / 77 kVA Connection: 4P circuit breaker, 5-wire cable Sockets: 1x5P 63A, 1x5P 32A -, 1x5P 16A -, 2x2P 16A Schuko sockets Frequency : 50Hz Chjdpfx Asnnx A Dslbsb Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 (new) Dimensions (LxWxH) : 2400x1000x1500 mm Weight: 1232 kg Diesel tank: 135L 100% load approx. 17.6l/h 75% load approx. 13.2l/h 50% load approx. 9.1 l/h additional costs 100A automatic switch € 620 250A automatic switch € 1080 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address guarantee The guarantee of the power generator within Germany is 12 months or 1000 hours from handover (whichever comes first). Provided you use the Newpower maintenance service in the maintenance intervals. Excluding user error, under Newpower international warranty.

Condition: new, Year of construction: 2023, The Newpower Generator proudly presents their new NWC77 emergency generator set with Cummins engine. The unit is new, complete including control, diesel tank, exhaust batteries, electric speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Technical specifications: Model: NWC77 emergency generator with sound insulation Cummins Engine Newpower generator set Engine : Cummins 4BTA3.9-G11, 4 cylinders Water-cooled and intercooler Generator: Newpower NW/N55 Continuous power: 56 kW / 70 kVA Maximum power: 61 kW / 77 kVA Connection: 4P circuit breaker, 5-wire cable Sockets: 1x5P 63A, 1x5P 32A -, 1x5P 16A -, 2x2P 16A Schuko sockets Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Cedpfoncd Rasx Albjhb Control: Comap IL4 AMF8 Year of construction: 2023 (new) Dimensions (LxWxH) : 2400x1000x1500 mm Weight: 1232 kg Diesel tank: 135L 100% load approx. 17.6l/h 75% load approx. 13.2l/h 50% load approx. 9.1 l/h additional costs 100A automatic switch € 620 250A automatic switch € 1080 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address guarantee The guarantee of the power generator within Germany is 12 months or 1000 hours from handover (whichever comes first). Provided you use the Newpower maintenance service in the maintenance intervals. Excluding user error, under Newpower international warranty.

Year of construction: 1985, condition: used, Distance between centers: 1200 mm Chedpsy A Hiqjfx Albob Copying attachment: Yes Motor power: 1.5 kW Speed: 870 / 1400 / 2100 rpm

Condition: new, Year of construction: 2023, The Newpower Generator proudly presents their new NWC55 emergency generator set with soundproofing. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Chsdpfxsncd Dij Albeb Technical specifications: Model: NWC55 emergency generator with sound insulation Cummins Engine Newpower generator set Engine : Cummins 4BTA3.9-G2, 4 cylinder, water cooled Generator: Newpower NW/N55 Continuous power: 40 kW / 50 kVA Maximum power: 44 kW / 55 kVA Connection: 4P circuit breaker, 1x5P 63A, 1x5P 32A, 1x5P 16A, 2x2P 16A Schuko sockets Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 Dimensions (LxWxH) : 2400x1000x1400 mm Weight: 1213 kg Diesel tank: approx. 125 L. (possibility to connect to an external tank) 100% load approx. 10.1l/h 75% load approx. 7.9l/h 50% load approx. 5.3l/h additional costs 100A automatic switch € 620 250A automatic switch € 1080 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Year of construction: 2026, condition: new, New OS-225-NX Nitrogen PSA Generator with the delivery for 505.2 Nm³/h at 5 bar (g) and a purity of 98.0 % (Other interpretations on request) Time of delivery 8 to 10 weeks Requirements for the compressed air supplied on site: Volume flow 20.21 m³/min Pressure 7 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 505.2 Nm³/h Nitrogen pressure: 5 bar (g) Purity: 98.0% Equipment: Nitrogen Generator OS-225-NX Compressed Air - Pressure Dew Point Sensor Air-Purity-Control Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. Chsdpjwa I Ebofx Albob On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Cjdpfx Alomdn Uaebshb Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Codpfsmdn T Ssx Albjhb Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Year of construction: 2025, condition: new, New OS-60-NX Nitrogen PSA Generator with the delivery for 65.0 Nm³/h at 7 bar (g) and a purity of 99.9 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 3.7 m³/min Pressure 9 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 65.0 Nm³/h Nitrogen pressure: 7 bar (g) Purity: 99.9% Equipment: Nitrogen Generator OS-60-NX Compressed Air - Pressure Dew Point Sensor Compressed Air - Pressure Sensor Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Chedpjvyq S Sjfx Albsb Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, TECHNICAL DETAILS Production Speed Production speed, UV spot coating: max. 3,123 ISO-B2 sheets/hour Production speed, Evo 75: max. 4,200 ISO-B2 sheets/hour Production speed, Evo 75: max. 2,291 ISO-B1 sheets/hour Production speed, hot foil embossing: max. 2,300 B2 sheets/hour Format and Printing Area Paper width: min. 290 mm Paper width: max. 750 mm Paper height: min. 360 mm Paper height: max. 1,200 mm Sheet format: min. 420 mm × 297 mm Sheet format: max. 750 mm × 1,200 mm Printable width: max. 540 mm or 730 mm Hot foil embossing area: max. 740 mm × 1,190 mm Resolution Resolution max.: 360 dpi Material Thicknesses and Basis Weights Material basis weight: min. 135 g/m² Material basis weight: max. 800 g/m² Material thickness before printing and lamination: min. 150 µm Material thickness before printing and lamination: max. 800 µm Material thickness for hot foil embossing: min. 150 µm Material thickness for hot foil embossing, standard version: max. 600 µm Material thickness for hot foil embossing, optional: max. 800 µm Foil Rolls Foil roll diameter: max. approx. 300 mm Foil roll length: 400–2,000 m Number of foil rolls that can be used simultaneously: max. 5 Foil roll width: min. 100 mm Standard core diameter: 1 inch MACHINE DETAILS Chjdpfozrfh Ijx Albob Dimensions & Weight Dimensions (L x W x H): 12,720 x 1,860 x 1,840 mm Weight: approx. 4,524 kg EQUIPMENT iFOIL-L module for hot foil finishing Evo-75 version for sheet formats up to 750 mm × 1,200 mm Holder for up to five foil rolls on one shaft Quick-change core for 1-inch foil rolls

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, distance between stands: 2,550 mm, control type: CNC control, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Chjdoxyw Sbopfx Albsb Hydraulic toolclamping Yes Power 7.5 kW

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: general overhaul Control: Mitsubishi - 64 bit CNC Generator power: 70 Amperes - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up rotary electrode changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64 bit, manufactured in 2006, has undergone a comprehensive and professional general overhaul in our facility and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the aforementioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axes. Chedezx Ambepfx Albsb Replacement of all (4) ball screws of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt scrapers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is ready for immediate use and is ideally suited for reliable production operation. 09/02.

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: general overhaul Control: Mitsubishi - 64 bit CNC Generator power: 70 Amperes - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up rotary electrode changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64 bit, manufactured in 2006, has undergone a comprehensive and professional general overhaul in our facility and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the aforementioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screws of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to OPS INGERSOLL protocol. Cedpfozgckvjx Albehb Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt scrapers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is ready for immediate use and is ideally suited for reliable production operation. 09/02.

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW Chedpezp Ipisfx Albjb

Condition: new, Year of construction: 2026, The ERBA Turbo 120 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine is equipped with a digital process timer, a digital speed display, and a dosing pump (wet version). The plate rotation speed can be adjusted via frequency converter. The machine also features a tilting motor for unloading. The Turbo 120 is available in both dry and wet configurations. Technical data: - Gross volume: 130 L - Drive power: 4.0 kW - Plate speed: 80 to 170 rpm - Optionally available with sound insulation cover, separation deck, or separation box As an experienced partner, we provide expertise in all aspects of mass finishing. Together with you, we develop efficient solutions to achieve optimal process results. All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may show the machine including accessories that are optionally available and subject to additional charges. Chodpoyq Rdaefx Albob If you are interested, we look forward to your enquiry. We are happy to provide you with advice free of charge and without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This listing serves only as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also include our general terms and conditions with imprint and information on the right of withdrawal, before any purchase or contract is concluded.

Year of construction: 2025, condition: new, New OS-40-NX Nitrogen PSA Generator with the delivery for 43.9 Nm³/h at 6 bar (g) and a purity of 99.9 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 2.5 m³/min Pressure >8 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 43.9 Nm³/h Nitrogen pressure: 6 bar (g) Purity: 99.9% Equipment: Nitrogen Generator OS-40-NX Compressed Air - Pressure Dew Point Sensor Compressed Air - Pressure Sensor Siemens S7 Touch Control Panel Cjdjw Dqdbjpfx Albehb Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: good (used), Year of construction: 1999, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, total height: 2,250 mm, total length: 2,000 mm, total width: 3,050 mm, grinding height: 300 mm, For sale is a CNC surface grinding machine of the brand Geibel + Hotz and type FS 415-Z SL The machine is ready for immediate use and fully functional Technical data Year of construction: 1999 Sanding range: 400*200*300 mm Operating voltage: 400/50 Hz/3 phases Control voltage: 2300/24 Volt Grinding spindle motor: 2 kW Table drive: electro-mechanical Cross-path drive: electro-mechanical Wheel bore: 51 mm Clamping width: min. 10/max. 30 mm Cone: larger D= 25 mm Mounting flange: Da= 108 mm Grinding wheel: 225*25*51 mm Clamping surface: 400*200 mm Dressing diamond: 0.75 carat Belt filter: Available Space requirement: 2000*3050*2250 mm On request, transportation and loading can be organized for an extra charge. Europe-wide can be organized. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Chsdpfx Aleuy Tkzjbsb For further information or contact options, please visit our website