Used Sahinler Mrm-S for sale (68,561)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 57000 € 1077.3 € 2550 mm 13 mm 13 mm 10 mm 10 mm 8 mm 260 mm 260 mm Dodpfoyb Sy Rox Albswb 200 mm 1,5 / 6 m/min 7.5 kW 4800 mm 1600 mm 1550 mm 6800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, Shaft diameter: 315working speed: 7motor power: 7,5length: 2000width: 1450heigth: 1700weight approx.: 3650 Dwjdpfoh Alicex Albsb Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--

Condition: new, die cushion stroke: 200 Dodpfx Asd Ab Ikolbewb

Condition: new, die cushion press capacity: ohne Dodpfx Ajd Ab Ipjlbewb

Condition: new, pressure: 60stroke: 250total power requirements: 7,5weight approx.: 4000messurements (LxWxH): 1.820 x 960 x 2.400table diamension: 750 x 500tappet area: 500 x 430drilling on table: 100daylight: 450working speed: 8,5retracting speed: 47rapid traverse: 26 Dwsdpfx Asd Ab Ixelbeb

Condition: new, pressure: 100stroke: 300total power requirements: 7,5weight approx.: 5400messurements (LxWxH): 1900 x 1300 x 2750table diamension: 1100 x 600tappet area: 680 x 420drilling on table: 120daylight: 500working speed: 5,5retracting speed: 37rapid traverse: 17,5 Dwodpsd Ab Iyefx Albob

Condition: new, pressure: 150stroke: 300column width: 1570working speed: 5retracting speed: 10Workshop Press: Steel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Equipment according to CE regulations, operating manual in German (Sample photo) Specifications: Press force: 150 tons Motor power: 11 kW Stroke: 300 mm Clear distance between columns: 1,570 mm Piston Ø: 280 x 200 mm Feed speed: 9 mm/s Working speed: 5 mm/s Return speed: 10 mm/s Length: 2,500 mm Width: 1,000 mm Height: 2,270 mm Dwodpfxjd Ab Ndo Albob Weight: 2,100 kg

Condition: new, angle iron / side length: 60 x 60 x 6double T-iron over x-axis: UPN 80 UNP 30U-iron over x-axis: UPN 65 UPN 30total power requirements: 3weight approx.: 1,4messurements (LxWxH): 1200 x 1100 x 800 Dwodpfed Acazjx Albeb

Condition: new, cutting pressure: 85throat depth: 355stroke: 80length of knive: 482motor: 7,5heigth: 2040weight approx.: 2315 Dedpfoh Hrx Eox Albswb

Condition: new, messurements (LxWxH): 2730x1150x2280weight approx.: 6000total power requirements: 11square steel bar: 55round steel: 65cutting pressure: 175throat depth: 625flat steel shear: 380x30 oder 600x20notching (strenght x width x depth): 16x60x100punching - round: 40x32 oder 57x22 oder 125x5angle iron cutting 90° or 45°: 200x200x20 oder 80x10 Dwedpeh Hvnmefx Albeb

Condition: new, pressure: 40stroke: 250table diamension: 625 x 1.100total power requirements: 4,0weight approx.: 0,92messurements (LxWxH): 1,15x0,70x0,95 Dwodpfsd Ab Iaex Albjb

Condition: new, pressure: 22stroke: 200table diamension: 625 x 1.100total power requirements: 2,2weight approx.: 0,635messurements (LxWxH): 1,100x0,630x0,925 Dwsdsd Ab Ibspfx Albjb

Condition: new, drilling on table: 120die cushion returning speed: 52die cushion stroke: 200die cushion press capacity: 30motor power: 11retracting speed: 165working speed: 8,5rapid traverse: 100daylight: 750pressure: 100tappet measurements: 900 x 600table diamension: 1100 x 700messurements (LxWxH): 2.180 x 1.600 x 3.350weight approx.: 9300total power requirements: 11stroke: 500 Dsdpsd Ab Imofx Albjwb

Condition: new, More technical data on request ht curtain manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots Dwsdpfjd Ab Igox Albsb according to CE rules press force:150 tohydraulic pressure:254 bartable:1200 x 750 mmram dimension:950 x 650 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:5,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.225 mmwidth:1.600 mmheigth:3.650 mmweight:8.200 kg

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100Technical DataPress force: 60 tons Motor power: 4 kW Stroke: 250 mm Dodpfx Alsd Ab Iqjbewb Clear distance between columns: 1,040 mm Piston Ø: 180 x 120 mm Feed speed: 8 mm/s Working speed: 4 mm/s Return speed: 10 mm/s Length: 1,710 mm Width: 700 mm Height: 2,100 mm Weight: 800 kg EquipmentSteel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Manual right/left cylinder movement Equipment according to CE regulations, operating manual in German and English

Condition: new, pipe diameter: 10-114: (2x) 50 x 940grinding belt speed: 3-22 Dwodpfed Ab U Dsx Albob

Condition: new, messurements (LxWxH): 1.630 x 700 x 1.200weight approx.: 480total power requirements: 1,1prebending: 2sheet thickness: 3sheet length: 1050 Dedpfjd Eqqqox Albjwb

Condition: new, messurements (LxWxH): 2040x950x2180weight approx.: 2940total power requirements: 11square steel bar: 50throat depth: 355round steel: 55flat steel shear: 380x25notching (strenght x width x depth): 13x60x100punching - round: 34x26 oder 55x16 oder 110x5angle iron cutting 90° or 45°: 150x150x16 oder 80x10pressure: 115 With two cylinders, hydraulic 5 workstations: - Hole punching station - Notching station, as well as flat steel, bar, and angle steel cutting stations. In the following configuration: - With two cylinders, hydraulic - Support table at the notching and flat steel stations with stops - Hydraulic and electrical components from renowned manufacturers - Support table at the hole punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric length stop 1000 mm for automatic cut-off trigger - Switch for setup and working operation - Technical documentation - Lighting - 2 foot pedals - CE execution SPECIFICATIONS DESCRIPTION / VALUE Model: HKM 115 Punching Force: 115 tons Dwsdpeh Hvniefx Albob Stroke: 355 mm Stroke: 80 mm Strokes per minute (at 20 mm stroke): 25 Max Sheet Thickness: Ø 34 x 26 mm Working Height: 935 mm Cutting Capacity: 600 x 15 mm, 380 x 25 mm Angle Steel 45° (1 leg): 80 x 80 x 10 mm Angle Steel 90°: 150 x 150 x 16 mm Knife Length: 610 mm Round: 55 mm Square: 50 mm Material Thickness: 13 mm Width: 2,040 mm Depth: 950 mm Motor Power: 11.0 kW Voltage: 400 V 50 Hz Height: 2,180 mm Weight: 2,920 kg

Condition: new, angle iron / side length: 80 x 80 x 8double T-iron over x-axis: IPN 120 IPN 80U-iron over x-axis: UPN 140total power requirements: 4weight approx.: 1700messurements (LxWxH): 1.450 x 1.000 x 1.400 Technical specifications Shaft Diameter: 80mm Roll diameter: 245 mm Dedpfsd Ab H Tox Albjwb Driven rollers: 3 Motor power: 4 kW Speed: 6 m/min. Bending performances (cross-section / min. diameter): Flat bar upright: 100x20 mm / 2000 mm; 80x20mm / 800mm; 30x10 / 300 Flat bar lying: 125x25 mm / 600 mm; 60x5mm / 300mm Square steel: 45x45 mm / 500 mm; 15x15mm / 380mm Round steel: Ø 50 mm / 500 mm; Ø 15mm / 380mm tube: Ø 100x2.5 mm / 1,200 mm; Ø 15x1mm / 380mm; Ø 3x5.48 / 800 mm; Ø 1/2x2.77 / 380 mm Form tube upright: 80x25x3 mm / 800 mm; 25x15x2mm / 350mm Form tube square: 70x70x3 mm / 1,300 mm; 25x25x2mm / 350mm Angle iron leg outside: 80x80x8 mm / 800 mm; 30x30x3mm / 400mm Angle iron leg inside: 70x70x7 mm / 700 mm; 30x30x3mm / 450mm UPN leg outside: UPN 140 / 1600 mm; RPN 120 / 900mm; RPN 100 / 800mm UPN leg inside: UPN 140 / 1,600 mm; RPN 120 / 1000mm; RPN 100 / 800mm IPN lying: IPN 120 / 600 mm; IPN 80 / 400mm gear 3 motorized rollers stable welded steel construction hydraulic Adjustment of the two bottom rollers Digital display of the bottom roller positions on a separate control panel lateral straightening rollers adjustable in 3 axes can be used horizontally and vertically Forward and reverse drive Machine and equipment according to CE regulations Options: NC Unit 7 Screen  EURO 9.000,-- We have more than 190 references!

Condition: new, die cushion press capacity: 30die cushion returning speed: 52die cushion stroke: 200daylight: 750pressure: 150stroke: 500 Dedod Ab Ilspfx Albewb

Condition: new, die cushion press capacity: ohne Dwsdpjd Ab Injfx Albob

Condition: new, sheet length: 1050sheet thickness: 1,0weight approx.: 0,185messurements (LxWxH): 1,4x0,7x1,12 Dsdod Eqrpepfx Albjwb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 25498, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 260 mm, working width: 2,070 mm, sheet thickness (max.): 25 mm, TECHNICAL DETAILS Sheet width: 2,070 mm Sheet thickness: 25 mm Bending capacity: 18 mm Top roller diameter: 320 mm Side roller diameter: 260 mm Lower roller diameter: 320 mm MACHINE DETAILS Total power supply: 26 kW Dimensions & Weight Space requirement: approx. 4,700 x 2,000 x 2,200 mm Machine weight: approx. 8,100 kg EQUIPMENT Hydraulic lateral roller adjustment Conical bending device 2 driven rollers Hardened rollers Hydraulic drop-end bearing Mobile control panel Foot switch Safety device Dwedeygw Ikspfx Albeb CE marking

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000 Dwsdpfx Aod Ab H Nolbeb         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame Dodpfxeh Alh Rj Albowb - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--