Used Ruwac Modell Ds 1221 H Ex for sale (69,675)

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Kjdoznkx Dspfx Ah Esdt Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2008, operating hours: 16,000 h, condition: good (used), functionality: fully functional, OKUMA SPACE TURN LB3000 EX Lathe Year: 2008 Control unit: OSP-P200L Kodpfsz Aku Ijx Ah Eedt Maximum workable length*1 (capacity): 500 mm Maximum workable diameter: 400 mm Bar feeder included, Model: IEMCA MASTER 880 33 P/R Chip conveyor with belt Software for gear cutting included, along with the corresponding gear-generating tool (as shown in the attached photo).

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, RUWAC – Wet and dry vacuum cleaner - CE marking - Year of manufacture: 2023 - Includes hose and nozzles - Fully functional Dimensions: L x W x H: 1.2 x 0.6 x 1.4 meters / Weight: 120 kg Errors and omissions excepted. Kdsdszphbropfx Ah Eet

Condition: used, Homogenizator tłokowy produkcji GEA Niro Soavi model NS3006H. Maksymalny przepływ do 50 l/godz. Maksymalne ciśnienie pracy do 1500 bar. Urządzenie jest wyposażone w pompę i lokalne sterowanie. Całość zamontowana na przejezdnej ramie ze stali kwasoodpornej. Kdodpezinb Sefx Ah Ejt

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 90 kg Total power requirement 0 kw Kdodovz Hvvspfx Ah Eot

Condition: reconditioned (used), Universal Tool Milling Machine Make: harich (DECKEL) Model: B (FP 2) Aktiv Refurbished with CE certification Geometric inspection with test protocol with warranty Accessories: - 3-axis digital readout Heidenhain Positip 8016 - Fixed table or universal table - Vertical milling head SK 40 - Centralized manual lubrication Kdjdpex A T Evjfx Ah Eot - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored cover on the vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, enable, start and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: used, Year of construction: 2022, Unwinding machine with centering belts, Nanmak DS 760 Year of manufacture: 2022 Condition: Test machine Infeed/outfeed belt speed adjustable separately Kjdpfxez A R Tnj Ah Eodt Roller speed adjustable Roller gap adjustable Belt width 76 cm Working length 172 cm Length per belt 81 cm Belt height from the ground: 108 cm Centering belt also available as a 3-row version Flour spreader External dimensions (L x W x H): 172 x 110 x 150 cm

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, TECHNICAL DETAILS Production Speed Production speed, UV spot coating: max. 3,123 ISO-B2 sheets/hour Production speed, Evo 75: max. 4,200 ISO-B2 sheets/hour Production speed, Evo 75: max. 2,291 ISO-B1 sheets/hour Production speed, hot foil embossing: max. 2,300 B2 sheets/hour Format and Printing Area Paper width: min. 290 mm Paper width: max. 750 mm Paper height: min. 360 mm Paper height: max. 1,200 mm Kdsdpfx Aszrfh Ieh Ejt Sheet format: min. 420 mm × 297 mm Sheet format: max. 750 mm × 1,200 mm Printable width: max. 540 mm or 730 mm Hot foil embossing area: max. 740 mm × 1,190 mm Resolution Resolution max.: 360 dpi Material Thicknesses and Basis Weights Material basis weight: min. 135 g/m² Material basis weight: max. 800 g/m² Material thickness before printing and lamination: min. 150 µm Material thickness before printing and lamination: max. 800 µm Material thickness for hot foil embossing: min. 150 µm Material thickness for hot foil embossing, standard version: max. 600 µm Material thickness for hot foil embossing, optional: max. 800 µm Foil Rolls Foil roll diameter: max. approx. 300 mm Foil roll length: 400–2,000 m Number of foil rolls that can be used simultaneously: max. 5 Foil roll width: min. 100 mm Standard core diameter: 1 inch MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,720 x 1,860 x 1,840 mm Weight: approx. 4,524 kg EQUIPMENT iFOIL-L module for hot foil finishing Evo-75 version for sheet formats up to 750 mm × 1,200 mm Holder for up to five foil rolls on one shaft Quick-change core for 1-inch foil rolls

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hib Akzent 1000 Model T1060-8 Welding Tongs Control Kjdpfx Ahsxmuzms Eodt Very good used condition, fully functional. Item location: 75053 Gondelsheim See pictures Shipping by freight carrier or collection

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Kdsdotz Hubopfx Ah Est -Dust extraction fan: Radial fan type -Motor: Loher 3.5 kW 955 rpm Ex protected -Volume flow: m³/h -Connection: inlet Ø 500 mm -Connection: Output 400 x 500 mm -Dimensions: 1160/880/H950 mm -Weight: 153 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 1,318 h, functionality: fully functional, input voltage: 240 V, input frequency: 60 Hz, We offer a used Kodak NX Imager, model Flexcel NX Digital Flexographic System, year of manufacture 2010. Kedpfoyrr I Aox Ah Esdt Machine set includes: • Imager (Exposing unit) • Laminator • Vacuum cleaner Bonus: Densitometer Machines are in excellent technical condition Laser: 1,318 h, like new, tested Checked and secured for transport by authorized Miraclon service, documented with invoice RIP station requires update due to Windows 10 Full documentation included Cabling, TIL input glass included (disassembled for transport) Laser secured by Miraclon, also disassembled for transport Serial number: TT0531 Date of manufacture: 2010/09/15 Model: TST Rated voltage: 200-240 V Frequency: 50/60 Hz Rated current: 8 A Country of manufacture: China For any questions or if you require additional information, please contact us via email or telephone.

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet Kjdpfx Ajvfdatjh Eodt - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Manufacturer - Weber Maschinenbau. Model - CCS-602. Serial number – 371. Date of manufacture - 2003. Knife – 460mm diameter circular knife. Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Kjdpfxezvx Dke Ah Eodt Power – 10 kW. Air (pneumatic) requirements – 10 bar. Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.

Condition: used, functionality: fully functional, Year of construction: 1996, operating hours: 11,233 h, load capacity: 2,000 kg, lifting height: 5,500 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Triplex Transmission: Hydrostatic Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Description: Kdsdpfxsz Dc Duj Ah Est Side shifter, 3rd valve, rear work light, front work light, half-cab, LED.

Condition: used, Name: Dispersion Mixer Manufacturer: Schneider Maschinenbau Gmbh Type: SHDC15 KWFU Ex Year built: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Driving force: 22,55 kW Model: Explosion protection: II 2 / 3 D c T120°C Total content: approx. 900 liter tank Parts in contact with product: Stainless steel Equipment: Hydraulically extendable Dimensions: Machine height approx.: 3100 mm, (top extended) Length, with container, approx.: 2200 mm, Weight, without container, approx.: 1600kg Foundation load approx.: 6000 kg / m3 Empty weight: 1600 kg Technical doc.: Yes in PDF Accessories: Stainless steel mixing container, solvent disc diameter 450 mm, frequency converter Condition: Second hand Kdsdpfxormmk Us Ah Eet Price: On demand

Condition: used, empty load weight: 3,280 kg, maximum load weight: 6,720 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 08/2011, loading space length: 7,270 mm, loading space width: 2,490 mm, loading space height: 2,880 mm, suspension: air, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. Equipped with a tarpaulin and bows, 2 axles, tandem axle, air suspension, ABS (anti-lock braking system), Edscha, lashing points, side protection, through-loading system, front supports, rear supports, storage compartment, adjustable drawbar. Superstructure: through-loading tandem trailer with tarpaulin and bows, and Edscha cover. GFA axles, drum brakes! Spare wheel available at an extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors. Ksdezbiyzspfx Ah Eodt

Condition: reconditioned (used), operating hours: 629 h, functionality: fully functional, fuel type: gasoline, empty load weight: 350 kg, HAKO JONAS 900 V Sweeper New air filter Machine usage: only 629 hours New main roller brush (PPL 1.0 + wire) combined with a new side brush (PPL 0.9 + wire) ensures excellent sweeping results New 12V 44Ah starter battery Built-in warning light A high-performance dust extraction turbine and new sealing skirts around the main brush prevent fine dust from rising during sweeping. The machine features a large debris flap for collecting larger waste. The unit has undergone a comprehensive, meticulous overhaul; operating fluids and parts—such as bearings, drive belts, and sealing skirts—have been replaced with new ones. Each unit we offer features actual photos; you are buying the exact machine shown. TECHNICAL DATA: Model: Jonas 900 V Engine: Petrol Sweeping width (mm): 700 Sweeping width with side brush (mm): 950 Kjdpfez Dtdfsx Ah Esdt Sweeping speed (km/h): 6 Hopper capacity (l): 60 (2x30) Filter area (m²): 3 Dimensions L x W x H (mm): 1500 x 1000 x 1330 Weight ready for operation (kg): ~350 INCLUDED: NEW air filter NEW main roller brush (PPL 1.0 + wire mix) NEW side brush (PPL 0.9 + wire mix) NEW starter battery (12V 44Ah) NEW roller skirt/seals Built-in warning light Waste hoppers (2x 30L) KEY FEATURES: Ergonomically designed cockpit and centrally positioned operator seat ensure excellent visibility of the cleaning area. The Jonas 900 V sweeper is the perfect machine for efficient, cost-effective sweeping of multi-level car parks, warehouses, production facilities, and outdoor areas. Petrol engine ensures high operational flexibility. Wide working width (950 mm) ensures high area coverage/productivity. Clear and intuitive control panel.

Condition: excellent (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 4803, type of input current: AC, overall weight: 2,200 kg, total width: 2,600 mm, total length: 2,600 mm, total height: 2,300 mm, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, A nearly new GKM KTS 2600 DS with less than 500 operating hours. This is a tumbling screen machine with a patented adjustment for the three-dimensional movement, allowing the dwell time for each product on the screens to be individually adjusted. The main shaft is driven by an electric motor and V-belt. Kjdpozl U Uwsfx Ah Esdt Technical data: • Tumbling screen machine with a 2600 mm diameter and 5 screen decks • Inlet DN 300, outlet DN 300, stainless steel • Screen lifter for easy removal • Approximately 4000 silicon balls for screen cleaning for difficult materials • Motor 5.5 kW, 400 VAC, 50 Hz • ATEX EXII-/3D Ex h IIIB T155°C design – Zone 20 inside, Zone 22 outside • Outlets are individually adjustable and adaptable • Installed screen sizes: 2 mm, 1 mm, 0.56 mm, 0.4 mm, 0.32 mm • Spare screens: 0.63 mm, 0.71 mm, 1.5 mm The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 5, color channels: 4, resolution (max.): 2,400 dpi, number of feeding trays: 6, counter reading (black): 121,531, counter reading (color): 236,585, input voltage: 220 V, Equipment: auto duplex, Xerox PrimeLink C9070, including OCT, 1OHCF, and an external Fiery Controller running Windows 10 on an SSD. Total color page count: 236,585 Total black and white page count: 121,531 Total page count: 358,116 ⚡ High productivity with 70 color pages per minute. Kdodpfozqbb Uox Ah Ejt 🎨 Very consistent color quality thanks to the EX Fiery Controller. 📚 Suitable for brochures, flyers, business cards, posters, book covers, and direct mail. 📄 Supports heavy paper stocks up to 350 g/m². 📏 Long sheets up to 660 mm for banners and triptychs. 🔄 Large paper capacity reduces downtime during production. 🖨️ Professional workflow integration for graphic production environments. Are you looking for other options for this machine? We are flexible and can configure the machine to your specifications! This machine has been inspected and thoroughly tested by our own specialized technical service department. If you require further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Kdjdpfx Ahezxf Ine Ejt Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter

Year of construction: 2007, condition: ready for operation (used), A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible. Kdsdpfxovtqrxj Ah Ejt

Condition: used, Year of construction: 2005, operating hours: 67,553 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 355 mm, displacement volume: 106 cm³, injection weight: 96 g, mold height (min.): 210 mm, opening stroke: 400 mm, plate width: 480 mm, plate height: 480 mm, installation height: 400 mm, heating capacity: 8.3 kW (11.28 HP), power: 11 kW (14.96 HP), Machine DEMAG Ergotech Extra 50-200 with SEPRO Axess S3 handling robot. Ready for production and available for inspection at any time. 2 pneumatic cascades, 1 AS core pull, 6 integrated hot runner zones. Kdodpfxjx Ex R Es Ah Eet

Year of construction: 2022, condition: excellent (used), Manufacturer / Model Voorwood L115M (H) with return conveyor Machine Type: Edge Foiling / Profiling / Sanding / Grooving Line with Return Conveyor Overview High-production edge finishing machine capable of profiling, sanding, grooving and applying decorative foil to panel edges and drawer side groove in a single pass. Includes return conveyor system for continuous single-operator workflow. Key Features - Single-pass shaping, sanding, and foil application - Up to ~8,000 lineal feet per shift - Return conveyor system for continuous production - Bottom feed chain with non-marking pads - Digital readouts for fast setup - PLC touchscreen controls - Temperature-controlled foil application with auto disengage Conveyor System - Receiving rollers: 5–100 FPM - Transfer belts: 115 FPM - Return rollers: 90 FPM - Adjustable working height: 29”–40” - Handles material up to 2½” thick - Independent motors for receiving and return Machining Stations Shaping: 5 HP motor, adjustable spindle Sanding: precision sanding spindle Foiling: 8” wheel, temperature controlled, auto tension Grooving saw: 8” blade, 3 HP motor Capacity - Feed speed: 2.4 – 10.7 m/min - Thickness: 3 – 51 mm - Minimum part size: 76 × 76 mm Utilities - 3-phase power - Dust extraction: 3 × 127 mm ports - Approx. 400 CFM required Ideal For - Drawer sides Kjdpsyvcw Ajfx Ah Eodt - Cabinet manufacturing - MDF edge finishing - High-volume production

Condition: like new (used), Year of construction: 2019, operating hours: 2,611 h, functionality: fully functional, machine/vehicle number: 7621, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 42,000 rpm, total height: 2,900 mm, total width: 2,400 mm, total length: 2,200 mm, table width: 900 mm, table length: 530 mm, type of input current: three-phase, input voltage: 400 V, workpiece weight (max.): 600 kg, distance table to spindle center: 600 mm, input frequency: 50 Hz, number of slots in tool magazine: 30, Equipment: documentation/manual, EXERON HSC 600/3 – a high-speed 3-axis CNC machining center, particularly suitable for the production of graphite electrodes. The EXERON HSC 600/3 is a highly precise 3-axis CNC machining center, designed primarily for machining graphite electrodes. The machine is optimized for high-speed (HSC) machining with high dynamic performance on all axes. The robust construction with a portal and a polymer concrete bed ensures excellent vibration damping, maximum precision, and top-quality surface finish. The machine is equipped with digital drives for all axes, direct measuring systems with a resolution of 0.0001 mm, a high-frequency spindle for HSC machining, and a Heidenhain TNC 640 control system. Thanks to its compact dimensions, it offers a minimal installation footprint and excellent accessibility for operation and automation. Kdsdpfx Ahjzrhd Ss Est The machine is in excellent technical condition, has been used very little, and is ready for immediate deployment in production.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: DS70 086, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 3,000 kg, Parallel twin-screw extruder - Manufacturer: WEBER - Type: DS 7.22 Kodpfx Aezxr Uuoh Eedt - Year: 2006 - Parallel twin screw, ø70mm, 22LD - 5 heating zones on the cylinder + 2 cooling zones - Motor: 30kW - Up to 40 rpm - Up to 180kg/h - tube and 120kg/h - profile (depending on material and tooling)