Used Randek Truss System Nt for sale (43,826)

Year of construction: 2022, condition: used, functionality: fully functional, Thermo Scientific Luminex xMAP INTELLIFLEX System. Year of manufacture: 2022 The Luminex xMAP INTELLIFLEX System is the newest addition to the xMAP line of instruments.The Luminex xMAP INTELLIFLEX System represents the most advanced and versatile multiplexing platform, featuring an embedded PC with a touchscreen interface and a reduced footprint compared to the Luminex 200 and FLEXMAP 3D systems. With automated start up, shut down, and maintenance routines, the Luminex xMAP INTELLIFLEX System is easy to use and maintain, providing fast read times for both 96- and 384-well plate formats. The system is compatible with all Invitrogen ProcartaPlex multiplex immunoassays and Invitrogen QuantiGene Plex multiplex gene expression assays. Features of the Luminex xMAP INTELLIFLEX System include: • Reporter laser (RP1): 532-nm diode-pumped solid-state laser (DPSS); mode of operation, continuous wave (CW); output power varies based on mode with maximum output power of 50 mW • Reporter detector (RP1): photomultiplier tube, detection bandwidth of 565 to 585 nm • Dynamic range (typical): RP1: ≥5.5 logs • Read time: 96-well plate in ∼20 min (up to 144,000 tests/hour); 384-well plate in ∼75 min (up to 153,600 tests/hour) • System warmup time: 30 min • System intialization: ≤45 min • System verification: 5 min • Multiplexing: up to 500 analytes in a single sample (assay-dependent) Hnsdpfxet Iikle Aa Eep • Available options: service contracts, IQ/OQ • Integrated PC and integrated barcode reader Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder Hodpoixxwmofx Aa Ejnp * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: new, OLEA: ANTI-RUST OILING SYSTEMS, made by EUROMAQUINA Single piece or bundle water-repellent oiling. Complete bundle oiling system. 1. Flow control Optimum for every diameter and production speed 2. Plug & Play Installation and commissioning in a few hours 3. Quick change Nozzle adjustment always from the outside for the whole range 4. Minimal consumption Air-oil spraying to reduce consumption by up to 75% 5. Low pressure micro spraying No mist in suspension Uniform adhesion on the tube surface 6. Adaptable design Designed to easily adapt to any line and customer need 7. Compact Only needs 250mm of free space in the line With position adjustment system by means of a diaphragm With this system, we can adjust the position of the nozzles from the outside, without having to open the rack or replace it and at the same time adjust the size of the opening to limit the possible oil leakage to a minimum. No oil suction system or collection tray with filter is required. Flow control: Optimum for every diameter and production speed Plug & Play: Installation and commissioning in a few hours Quick change: Nozzle adjustment always from the outside for the whole range Minimal consumption: Air-oil spraying to reduce consumption by up to 75% Low pressure micro spraying: No mist in suspension & uniform adhesion on the tube surface Adaptable design: Designed to easily adapt to any line and customer need Hnedowq Nghepfx Aa Eop Compact: Only needs 250mm of free space in the line

Condition: excellent (used), I am offering for sale an Agilent Technologies Systems Controller, model 86030-30011. This is an industrial computer designed to work with Agilent's measuring and laboratory equipment. The device is housed in a robust, rack-mountable metal enclosure. Inside, there is a PC equipped with, among other things, a CD-ROM drive and a 3.5" floppy disk drive. Numerous communication ports are available on the rear, allowing it to interface with laboratory devices. Technical specifications: Manufacturer: Agilent Technologies Model: 86030-30011 Serial number: 50860C05 Power supply: 115/230 V AC Frequency: 50/60 Hz Current consumption: 10 A / 5 A Year of manufacture: 2009 (according to the nameplate) Connectors: LAN (RJ-45) VGA Hedpfx Aozl Hz Asa Eonp PS/2 (keyboard and mouse) COM (RS-232) LPT DAS 1800 interface Additional industrial/specialized connectors Visual condition: Normal signs of use in the form of minor scratches and dirt on the enclosure. The inside of the device appears to be complete. There is a sticker indicating an electrical inspection performed in 2014. Sold without any additional accessories, cables, or software. Included: Agilent Technologies 86030-30011 Controller – exactly as shown in the pictures.

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Hnjdpfjvuw R Rjx Aa Ejp Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol Hnjdpfx Aaoxt Dmxo Eep • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: excellent (used), REF: MM5767 Hedpfx Aaeulc Sqo Ejnp 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Manufacturer - Adpak Machinery Systems Ltd Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: excellent (used), This machine was filling capsules and tablets into small tubs. The whole line is also available. Bottles are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Hnjdpfsxm S Hmjx Aa Eop

Year of construction: 2015, condition: like new (used), Item: M-09300-Combi-Packer STAINLESS STEEL COMBI PACKER Multipack Producer:Sema Systemtechnik Hedpfx Aash Hq U Uo Eonp Machine Model: 1400s-FN-TPW Year of production: 09/2015 Complete Stainless Steel That is not used long time, like new one!

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization Hnedpfxoxt Dk Re Aa Eep - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: used, functionality: fully functional, The 16-channel FT2M control system from MTS was in use until recently and is now for sale. All 16 system cables for 16 control channels—force, displacement, and servo valve—are included. PC and system software are included. Equipment: 16 pcs: Dual Valve Driver Board 497.26 16 pcs: AC Amplifier Board AC Cond 497.13B Hodpfjwv Uqiex Aa Esnp 16 pcs: Dual DC Amplifier Board 497.22C 4 pcs: 497.01 Analog Chassis (19" rack) 4 pcs: Power supply +-15V/+5V 4 pcs: Station Control Card 497.34 4 pcs: RS232 Communication Card 497.36 1 pc: Hydraulic Control Panel 497.05 for 4 stations 1 pc: Global Resources III Card 498.71B 4 pcs: ADDA Card 498.65 2 pcs: PROC CPU 498.96-3

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00034717-00-0010-01, No reserve price – guaranteed sale to the highest bidder! The original purchase price of the system was 93,000 EUR! Washing system with the following configuration: Hnodpfx Aoyx U D Uea Eop - Recycled water system (QU00370) - Articulated arm assembly (QU01210), clearance height 2,250 mm - SENSOFIL + (QU01410), clearance height 2,250 mm - Roof roller splash guard (QU00142) - Wheel washing unit with brush & linear technology (QU00151) - Side high-pressure system (QU00152), 2 RD, 1 overflow: 20 l/min, 85 bar - Side high-pressure system (QU00169), 8 OD, 1 overflow: 40 l/min, 50 bar - Active foam applicator (QU01500) - Special wax application unit (QU01530) - Emergency stop device front left (QU00320) - Emergency stop device front right (QU00330) - Emergency stop device rear left (QU00340) - Emergency stop device rear right (QU00350) - Positioning device, LED, fixed, left (QU00388) - Positioning device, LED, fixed, right (QU00389) - Fresh water system separation, pipe separator (EZ00000) - Energy supply chain (EZ00020) - Operating terminal, VARIO-L, wall-mounted (EZ02500) - Wheel guidance rails (EZ00700) - Signs DIN A3 - Documentation, PWA, standard, DE - VDA conformity certificate, PWA, DE - Initial chemical set, PWA Electrical data: Rated voltage: 400 V Mains connection: 3/N/PE Frequency: 50 Hz Power consumption: 19.0 kW Rated current: 38 A

Condition: like new (used), Year of construction: 2017, 1 used bulk material counting system based on vision systems Manufacturer: DATA Detection Technologies Ltd. Model: DATA count U-162 Year of manufacture: 2017 Size Bulk material parts: 1 to 5 mm The U-162 small parts counter was specifically developed for use as a filler on automatic bagging machines and is ideal for counting repeat batches of the same product type. Embedded with ICI vision mass counting technology, the U-162B parts counter is capable of counting an unprecedented variety of small parts ranging from 1 mm to 25 mm in size, without the need for tooling changes when switching between objects. Complex-shaped items, including open-formed pieces, can be easily counted, making the U-162B small parts counting machine an ideal system for industries such as aerospace, defense, medical, electronics, hardware, and others. Its unique ability to count multiple items in parallel leads to counting speeds of up to 200 objects per second, delivering results comparable to weight-based machines while maintaining higher accuracy compared to conventional counters. The DATA U-162 small object counting machine can be integrated into a variety of automatic poly bagging machines, such as Autobag, Audion, Paxmatic, Sharp, and many others. Main features: - Vision and algorithm based - Counting accuracy: up to 99.8% - Part size range: 1 mm – 25 mm Hnjdpfox A Ekkex Aa Eep - Speed: Up to 200 objects per second - Industry 4.0 compatible - GMP-compliant design - Easy handling of challenging items - Automatic learning for all object types - One-time setup / no calibration required - Unlimited programs and products - Jam flap to increase counting performance - Ejector mechanism for automatic discharge of excess quantities - Touch panel, PC-based HMI with intuitive graphical user interface - Remote control for remote maintenance - Supports TCP/IP protocol

Condition: used, Specification: Excitation (light source) Bright white LED source with a median lifetime of >5 years Hnedpfxsx I I Ule Aa Ejp Dimensions and weight 27 × 50 × 40 cm (W × D × H),

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Hjdpew Inpnjfx Aa Eonp

Condition: used, This listing is for a Thermo Labsystems Multiskan Ascent Microplate Reader The Thermo Labsystems Multiskan Ascent is an advanced, compact, one-channel vertical light path filter photometer designed to perform standard photometric measurements. The measurement types include end point, two point and kinetic measurements. Due to the innovative optical system of the Multiskan Ascent, the instrument can read both 96- and 384-well microplates and is linear to 4.0A. The instrument is a rapid reading microplate reader. Hedpfjxzhctjx Aa Eenp

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,830 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 8070 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body construction year: 2021, Axle type: SAF, MEGA DOUBLE DECK // HARD WOOD FLOOR // SAF DISC BRAKES / LIFTING AXLE = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lifting axle; Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Tare weight: 8,070 kg Payload: 34,930 kg GVW: 43,000 kg Hnjdpfjy Irnvjx Aa Ejp Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 335 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of construction and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), axle configuration: 3 axles, first registration: 08/2026, loading space length: 13,700 mm, loading space width: 2,500 mm, loading space height: 2,780 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 8,790 mm, color: other, Year of construction: 2026, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 3, Payload: 30950 kg, Tare weight: 8050 kg, Gross weight: 39000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2026, Axle type: SAF, Tail lift, Tail lift design: under-folding tail lift, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 240x170, Battery for ramp, TAILLIFT 2,000 KG 3x 9 TON SAF AXLES DISC BRAKES = Additional Information = General Information Cab: Day cab Registration number: OX-74-GS Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Axle 2: Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Axle 3: Lift axle; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Weights Tare weight: 8,050 kg Payload: 30,950 kg GVW: 39,000 kg Functional Tail lift: Dhollandia, under-run, 2000 kg Environmental Emission class: Euro 0 Condition Technical condition: very good Optical condition: very good Damage: none Hnsdpfjzk Un Usx Aa Esp = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: new, Balance Systems Digital Interface Balancer 9SHVM2512B N220, circuit board, serial number B803704, unused, 100% functional, scope of delivery as shown in the photos. Hnedpoi D T Dgsfx Aa Eop

Condition: excellent (used), mileage: 579,500 km, power: 184 kW (250.17 HP), first registration: 09/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2015, Truck with hooklift container system MAN TGL 12.250 First registered: 11/09/2015 Mileage: 579,500 km, 11,207 operating hours 12-speed automatic transmission Emission class: 6 New hooklift container system Manufacturer: JIMECA Load capacity: 8,000 kg Hook-to-roller distance: 3.0 to 3.6 meters Material/toolbox: Dimensions: Height: 1.0 meter Width: 0.7 meter Depth: 2.2 meters Front tires: +/- 30% Rear tires: +/- 30% Front brake pads: 28–26% Rear brake pads: –28% Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium Hnedpfszl Trnex Aa Eop

Year of construction: 2000, condition: refurbished (used), functionality: fully functional, machine/vehicle number: D135/150/370/2HD, Dragon shredder is made in UK and very heavy built shredder for wood, plastic and many other applications please get in touch and come and see it. its ideal for heavy industry. Hnedpfozl D U Tjx Aa Esp

Condition: new, 10x15m storage platform, load: 500kg/sqm lower edge: 3.0m, approx. 150sqm system platform Data: - Length : approx. 10m - Width : approx. 15m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 150 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Hnodpfx Aaozl A Ife Ejp Scope of delivery : - 12 x C profile 5000 mm , sendzimir galvanized . - 40 x S profile 4800 mm , sendzimir galvanized . - 12 x support 3000 mm , RAL 7016 . - 03 x dome strut 3049 mm , RAL7016 . - 70 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 12 x Lining plates for supports . - 12 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Price : 18.525 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 10x10m storage platform, load: 500kg/sqm lower edge: 3m, approx. 100sqm, system platform Data : - Length : approx. 10m - Width : approx. 10m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 100 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 08 x C profile 5000 mm , sendzimir galvanized . - 28 x S profile 4800 mm , sendzimir galvanized . - 09 x Support 3000 mm , RAL 7016 . - 03 x dome strut 3049 mm , RAL7016 . - 47 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 09 x Lining plates for supports . - 09 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTATION TAILORED TO YOUR REQUIREMENTS. Price : 13.167 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : Hnsdpfx Aajzl A H Uo Eep - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 10x25m storage platform, load: 500kg/sqm lower edge: 3.0m, approx. 250sqm system platform Data : - Length : approx. 10m - Width : approx. 25m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 250 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 4.15m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 020 x C profile 4150 mm , sendzimir galvanized . - 004 x C profile 4250 mm , sendzimir galvanized . - 066 x S profile 4800 mm , sendzimir galvanized . - 021 x Support 3000 mm , RAL 7016 . - 004 x Strut brace 3049 mm , RAL7016 . - 0116 x Clamping plate 2400 x 1000 x 38 mm natural/white P6 . - 021 x Lining plates for supports . - 021 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Price : 26.487 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (Standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Hodpfx Aezl A Hnja Eenp Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 5x10m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 50sqm system platform Data: - Length : approx. 5m - Width : approx. 10m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 50 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 04 x C profile 5000 mm , sendzimir galvanized . - 14 x S profile 4800 mm , sendzimir galvanized . - 06 x support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 24 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 06 x Lining plates for supports . - 06 x Set of dowels for supports . Price : 7.575 € net plus legally valid VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station Hjdpezlz Rfefx Aa Eonp - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.