Used Profile Bender Ahb 60 for sale (27,002)

Condition: good (used), Year of construction: 2002, I - beam section - flat steel 120 x 20 (d 750) mm I-beam section - upend 60 x 10 (d800) mm L-beam 50 x 5 (d 1200) mm bar material - diameter 35.0 (d 800) mm bar material dia. max. 70 x 3.0 (1200) mm 50.0 mm diameter of upper rolls 155 mm diameter of lower rolls 155 mm Stroke length 150 mm Rotating speeds 9.0 U/min total power requirement 1.3 kW weight 305 kg range L-W-H 900 x 700 x 1500 mm Features: - Robust electric-motor-driven ring/profile bending machine - Machine base frame with rear storage shelf - Can be used in both horizontal and vertical orientations - Equipped with a wide variety of roller sets * Split roller segments * Pipe rollers - Electro-hydraulic feed of the upper roller - Manually adjustable side/alignment rollers - 1 freely movable control panel Pjdpfxez S U T So Ag Rogu - Base frame with forklift pockets * For easy transport

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Revamping year: 2025 Pgjdpfx Aovtp Rmeg Rsu Original manufacturing year: 2005 Wire diameter: - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Working pressure: 7 bar Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Punches 20 mm holes in 19 mm steel Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Very good condition Pgjdpfx Agsq D E Tcs Rju

Condition: good (used), Year of construction: 2014, machine/vehicle number: 59 526 05 221 0010, functionality: fully functional, operating hours: 1,000 h, power: 20 kW (27.19 HP), input voltage: 380 V, input current: 33 A, type of input current: three-phase, temperature: 650 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,800 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 350 kg, number of chambers: 1, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, Hardening furnace Vötsch VAW 60/100, in good condition. For sale due to business closure. Pgedpfx Ajz Rnwhjg Reu Very reliable furnace; the temperature difference in the combustion chamber at 500°C is +/- 15°C. The furnace was operated at a maximum temperature of 500°C during production. The door seal is in good condition. The new price was EUR 38,000.

Condition: excellent (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, table load: 350 kg, number of axes: 5, TECHNICAL DETAILS X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Table length: 1,000 mm Table width: 600 mm Rotary table diameter: 600 mm Podpfxs Afw Aus Ag Rogu Table weight: 800 kg Table load capacity: max. 350 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 mm T-slot spacing: 63 mm C-axis swivel range: 360° Tool interface: SK 40 Tool positions: 24 MACHINE DETAILS Control system manufacturer: Heidenhain Spindle operating hours: 18,419 h Total operating hours: 50,446 h EQUIPMENT 5-axis machining (3+2) NC-controlled swivel milling head (B-axis) NC rotary table (C-axis), integrated into the fixed machine table 24-position tool changer

Condition: ready for operation (used), Year of construction: 1984, machine/vehicle number: No.317, No.327, functionality: limited functionality, operating hours: 40,000 h, overall weight: 3,700 kg, Equipment: documentation/manual, For sale are 2 (two) sets of optical profile grinding machines Wasino type GLS-130AS, with Fanuc control, made in Japan in 1984. 1 machine is working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Second machine serial No.327 is the same complete condition, just factory worker could not start it up for us, was worked more then 1 year ago. There are accessories, tools and technical documentation for each machine. Pgsds Afb Eyspfx Ag Rsu For 1 machine Wasino complete with accesories and tools, price is 18500 euro EXW stock. Preferable to sell as package 2 machines together.

Condition: used, Year of construction: 2008, Edge banding machine Manufacturer: IMA Type: Advantage 60 Year of manufacture: 2008 Technical data - Feed speed: 16 m/min - Workpiece thickness: 8 - 60 mm - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Edge thickness: 0.3 - 8 mm - Edge height: 12 - 65 mm - Edge length: 160 - 350 mm - Joint milling unit - Air blow nozzle for removing loose particles - Workpiece preheating - Glue application unit - Cross-cutting saw unit - Multi-function milling unit for milling and rounding corners - Profiling blades - Cleaning agent spray system (Riepe) Pgedpfx Agez Tf E Ue Rou - Surface finishing blades - Brush unit - Groove milling unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 1. LBS-60/30 (6 pieces) 2. ESL-60/30 RS-L 3. VB-45 4. ATH-60/30 FD 5. BTA-50/33 6. BTS-10/30 Pode Afw U Dspfx Ag Rsgu 7. BTA-20/33 8. BTS-37/33 9. TBX-33/12

Condition: used, Year of construction: 1998, machine/vehicle number: 844, functionality: fully functional, pressing force: 61 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 640 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,000 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 61 T – 1,700 × 1,200 mm For sale is a hydraulic 4-column stamping press from the manufacturer ALN August Luigart & Sohn GmbH & Co. KG with a maximum pressing force of 61 tons. The machine has a table size of 1,700 × 1,200 mm, a maximum installation height of 1,350 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-column stamping press – 61 T – 1,700 × 1,200 mm ==== General Information - Manufacturer: ALN August Luigart & Sohn GmbH & Co. KG - Type: Oil-hydraulic 4-column stamping press - Model: 4 SPy 60 SO - Machine number: 844 - Year of manufacture: 1998 - Pressing force: 61 T - Rated force: 600 kN - Table size (working area): 1,700 × 1,200 mm - Ram plate size: 1,700 × 1,200 mm - Table height: 640 mm - Open height: 1,450 mm Pgodpfx As Adrzcsg Rou - Installation height: 1,350 mm - Stroke: 1,000 mm - Front opening: 1,700 mm - Side opening: 850 mm - Installation width front/rear: 1,700 mm - Installation width side: 850 mm - Tool upper part weight max.: 1,200 kg - Total height: 3,992 mm - Total width: 2,645 mm - Total depth: 1,965 mm - Total weight: 12 T - Basement required: no ==== Hydraulic cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 180 mm - Piston rod diameter: Ø 160 mm - Guide column diameter: Ø 125 mm - Stroke: 1,000 mm - Max. working pressure: 236 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s - Setup speed: 10 mm/s ==== Hydraulics & Drive - Main motor: 25 kW - Oil tank: 650 l - Oil type: HLP ISO VG 46 - Oil filter fineness: < 25 µm - Operating temperature max.: 60 °C - Pneumatic pressure accumulator: yes ==== Tooling - T-slots: 5 - T-slots according to DIN 650 / T22 M20 ==== Control System - Control: SIEMENS SIMATIC Touch Panel - Control panel: on the frame - Two-hand operation - Valve voltage: 24 V DC - Control voltage: 230 V AC ==== Safety - Stroke end damping - Follow-up stroke: 26 mm - Follow-up time: 113 ms - Safety distance: 228 mm - Emergency stop - Light curtain / light barrier - Protective grid - Separate control cabinet - Maintenance platform: no ==== Electrical Connection - Operating voltage: 415 V - Frequency: 50 Hz - Power supply: 3PEN - Connection cable: 16 mm² - Fuse: 63 A - Main motor current consumption: 48 A - Noise level: < 70 dB(A) ##### Application areas: Stamping, forming, straightening, press-fitting, assembly operations, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic stamping press, 4-column stamping press, oil-hydraulic stamping press, hydraulic press, hydraulic press, ALN press, August Luigart press, 4 SPy 60 SO, 61 T press, 61-ton press, forming press, stamping press, straightening press, assembly press, industrial press)

Condition: ready for operation (used), Year of construction: 2012, Are you looking for a solution for efficient and environmentally conscious operations? Then a waste compactor is the solution to your waste problem! These powerful and reliable waste compactors are suitable for compressing various materials such as cardboard, plastic, textiles, and other materials. The machines process the waste into bales. Ideal for companies that want to save space and recycle. Specifications Brand: DIXI Type: 60 SD Year of manufacture: 2012 Pressing force: 60t Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Feed opening dimensions: 115 cm x 80 cm deep x 55 cm high Video available upon request Pjde Adrtropfx Ag Regu Transport available upon request

Condition: new, Year of construction: 2026, KRBS 101: Combined tube, profile, and belt grinding machine Convenient operation thanks to easily adjustable clamping device The rotatable clamping jaws of the clamping device enable secure clamping of square tubes, round tubes, and flat steel Adjustable grinding angles from 30 - 90° and from 0° - 60° The optimized quick-change holder allows the clamping roller to be easily and quickly replaced without tools Particularly durable thanks to larger and improved roller bearings Practical clamping roller holders integrated in the base Extensive range of clamping rollers for grinding various tube diameters available as accessories Quick changeover between tube grinding and belt grinding possible Powerful motor Almost all settings can be carried out without tools (operating tool included) Large, foldable protective screen with optimal field of vision Two belt speeds allow optimal adaptation to the respective material (15 m/s best for stainless steel and aluminum, 30 m/s perfectly suited for steel) With two easily removable chip collection containers Dust extraction port (Ø 100 mm) for dust extraction systems available Dust extraction systems available as accessories Pedpecnz Ayefx Ag Rogu Further developed, vibration-reducing base Scope of delivery: 1 x Standard grinding belt, grit size K 36 2 x Chip collection containers 1 x Wrench 1 x Grinding roller 42 mm Model: KRBS 101 Item No.: 3921001 Technical data Mains connection: 400 V Mains frequency: 50 Hz Motor power: 2.5 / 3.3 kW Grinding diameter: 20 - 76 mm Grinding angle: 30 - 90 ° (0° - 60°) Grinding belt (length x width): 2000 x 100 mm Belt speed: 15/30 m/s Dust extraction port diameter: 2 x 100 mm Dimensions (length x width x height): 1250 x 750 x 1140 mm Weight: 159 kg Location: Ex works - available for short-term delivery

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 12/50, sheet thickness (max.): 2 mm, power: 18 kW (24.47 HP), working width: 1,500 mm, working length: 2,160 mm, control type: CNC control, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working width: 1,500 mm Working length: 2,160 mm Sheet thickness: 2 mm Engine power: 18.0 kW Pedpfx Aj Af Smlog Rjgu Control system: CNC MACHINE DETAILS Weight: 22,000 kg EQUIPMENT Complete loading system Documentation available CE marking available

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 2,960 mm, travel distance Y-axis: 4,800 mm, travel distance Z-axis: 510 mm, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 120 mm, number of axes: 5, number of slots in tool magazine: 40, controller manufacturer: osai, actuation type: pneumatic, Equipment: CE marking, documentation/manual, The machine is in full working order. Pgsdpfo Aarpljx Ag Reu It is operational. Maintained accuracy is at the level of +/- 0.2 mm. The offer with details and photos is attached.

Condition: used, functionality: fully functional, Table dimensions (x-y/mm)  890 x 458 Ram dimensions X-Y (mm)  890 x 458 Stroke (mm)  20 - 76 Slide adjustment (mm)  80 Type of strokes  adjustable Strokes per minute  70 - 750 Overhauled in 2021 Pedpfxo Agb Eqo Ag Regu

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm Podeqfgy Hopfx Ag Regu - workshop overhauled Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: good (used), Year of construction: 2022, Brand: Dr. Boy GmbH & Co. KG Type: BOY 60E #55841 Year of manufacture: 2022 Operating hours: On request Screw diameter: 32 mm Maximum injection pressure: 2,142 bar Maximum shot volume: 100.5 cm³ Clamping force: 60 T Maximum distance between tie bars: 360 x 335 mm Minimum mold height: 250 mm Maximum distance between platens: 650 mm Pgsdpjz Tiwhsfx Ag Rju Electrical connection: 400 V / 50-60 Hz, 27.2 kVA Heating capacity: 8.4 kW Dimensions: 3,450 x 1,150 x 1,950 mm (L x W x H) Weight: 2,300 kg Options: • Procan ALPHA 4 control system, 15" full-touch display • TEC Package 1: wear-resistant screw and barrel, ceramic heaters • Interface package including OPC-UA, Euromap 77 & 82 • Cooling circuits (3x) on both platens + 8-way water distributor • Oil filling (EconFluid, ISO-32)

Condition: used, Year of construction: 1970, rechts Ausklink / links S fence elektronisch ja /nein foot pedal mechanisch Pjdpfoztf Ahjx Ag Rsgu weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1990, pressure 35 t no. of strokes ca 72 Hub/min Pjdjztf Anspfx Ag Rjgu dayligth 195 mm total power requirement 1,5 kW weight of the machine ca. 330-400 kg

Condition: ready for operation (used), Year of construction: 2000, Available immediately ex-works: CNC vertical machining center, Quaser Type MK 60 II Year of manufacture: 2000 CNC control: Fanuc 18 M Pgsdpfx Ags Aa Irps Rsu Table: 1050 x 550 mm Travel ranges X/Y/Z: 1020/610/560 mm Spindle taper: SK 40 Tool magazine: 36 positions Spindle speeds up to 10,000 rpm Power at the spindle: 15 kW Internal cooling system Weight: 8.5 tons Price: EUR 8,500.00 plus VAT, ex-works.

Year of construction: 2024, operating hours: 5 h, condition: new, functionality: fully functional, The NOMA NOWICKI KN-60 cutter is a high-speed meat cutter with a 60-liter bowl, manufactured in 2024, designed for grinding, emulsifying, and mixing meat, fat, and other raw materials in small and medium-sized food processing plants and food service companies. The machine is equipped with a microprocessor-based control system with memory for 40 processing programs, stepless speed control for the blades and bowl, hydraulic unloading, and a hygienic design that facilitates cleaning. Replacement parts are included. The mixing function with reverse blade rotation (from – 200 to – 400 rpm) allows the filling to be gently mixed without further grinding. Once the process is complete, the finished mixture is discharged hydraulically, with an adjustable discharge disc speed, for both dry and liquid mixtures. All operating parameters are controlled by a microprocessor, which can store up to 40 processing programs. Key Features of the NOMA NOWICKI KN-60 meat cutter A wide range of blade speeds, smooth adjustment of blade and bowl rotation speeds, and the ability to select different blade combinations provide great flexibility when changing recipes and product consistencies. Reverse mixing, the ability to save 40 programs, and high hourly throughput ensure consistent stuffing quality with short processing times. The cutter’s design facilitates hygiene and operator comfort: all food-contact surfaces are polished, flat surfaces are angled at 3° to allow water to drain, and the covers open for cleaning. The high product entry threshold, the bowl rim, the opening in the lid for adding spices during operation, quick access to the blades, and the sound-dampening lid improve ergonomics and working comfort. Technical Specifications of the NOMA NOWICKI KN-60 meat cutter Manufacturer: NOMA (NOWICKI MACHINERY) Machine type: high-speed cutter Model: KN-60 Year of manufacture: 2024 Power supply: 3 x 400 V, 50 Hz Marking: CE, manufactured in the EU Bowl capacity: 60 L (60 dm³) Blade shaft speed: 200 – 6,000 rpm, continuously adjustable Mixing speed (reverse rotation): from -200 to -400 rpm Bowl speed: continuously adjustable Blade combination selection: Yes, choice of blade sets Cutting technology: “air cutting,” optimized bowl and blade geometry Unloading: hydraulic, adjustable unloading disc speed, optional stepped disc Control: microprocessor-based, memory for up to 40 processing programs Length: 1650 mm Width: 1,310 mm Height with the cover lowered: 1,190 mm Height with cover raised: 1,850 mm Control cabinet dimensions: 800 x 800 x 300 mm Weight: 1,350 kg Hygiene: polished food-contact surfaces, flat surfaces angled at 3°, removable covers, and a bowl drain hole for easy cleaning Ergonomics: high product entry threshold, bowl rim, opening in the lid for adding spices during operation, quick access to blades, sound-dampening lid Replacement parts: included Psdpoz S Iafofx Ag Rsgu

Condition: good (used), Year of construction: 2015, pressure 60.0 t punching cross-cut in cmm 28 in 15 / 38 in 11 mm square edge steel 35 x 35 mm L-beam 120 x 120 x 12 mm round bar steel 40.0 mm flat steel 200 x 20 / 300 x 15 mm blade length 317 mm throat 220 mm work height max. 940 / 1140 mm strokes per minute max. 26 work stroke max. 55.0 mm oil volume 23.0 ltr. total power requirement 4.0 kW weight of the machine ca. 1440 kg Dimensions (HxWxD) 1510 x 590 x 1570 mm From a maintenance workshop Original price of base machine ~ 14.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Punching station, flat steel shear, . angle/profile steel shears, notching station - heavy-duty and stable welded construction - infinitely variable stroke adjustment - very compact design - support table at notching and punching stations - side support tables - 1x freely movable control panel - Emergency stop button - Operating instructions (PDF) Pgsdpfx Agj Aa A Ife Reu

Condition: used, Year of construction: 2002, overall weight: 5,000 kg, total length: 7,000 mm, total width: 1,700 mm, total height: 1,700 mm, year of last overhaul: 2026, Equipment: documentation/manual, Based on the following description, here is the machine description in Hungarian: Pjdps Aarrysfx Ag Rsgu We offer a used Schwarze-Robitec CNC 80/60 E TB MR tube bending machine, manufactured in 2002. Serial number: 2002-0410 Type: CNC 80/60 E TB MR Year of manufacture: 2002 Tool sets: 40x 2R 60, 90, 120, 150. 38x 2 R 107.5 If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2017, Vötsch VAW 60/100 Heat Oven / Heating Cabinet / Furnace Internal dimensions: 600mm x 1000mm x 600mm (W x D x H) External dimensions: 1800mm x 1800mm x 2200mm (W x D x H) Rated temperature: 650 °C Year of manufacture: 2017 Pjdpfewykz Sex Ag Regu Nominal power: 20 kW You are welcome to arrange a viewing. We can organize cost-effective shipping for you upon request. You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All listed company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Condition: used, overall weight: 40,000 kg, No. 3282 Float and laminated glass cutting line Lisec ESL-60/30RS / VB-33 Used, year of construction 2009 / 2016, line still in operation, expected to be available from 15.02.2027 According to our customer / the previous owner, the line is fully functional and can be inspected on site Scope of delivery Only the areas framed in yellow in the layout Laminated glass cutting items 1 - 8, float glass cutting items 9 - 22 Item numbers as marked on the photos Key technical data Designed for jumbo size 6000 x 3210 mm Float glass cutting up to max. 33 kg/m2 glass weight, corresponds to approx. 13 mm glass thickness Laminated glass cutting up to max. 43 kg/m2 glass weight, corresponds to approx. 17 mm glass thickness 2 laminated glass cutting bridges Lisec VB-33 for higher output Automatic cutting table with grinding unit for edge deletion (Low-E) Automatic breaking in X and Y direction Conveyor sections up to max. 50 kg/m2 Power supply 3/N/PE 400 V / 50 Hz, control voltage 24 V Compressed air 6 - 8 bar Total of the stated connected loads approx. 210 kVA Laminated glass cutting Item 1: Laminated glass cutting machine Lisec PTV-60/30RE, year of construction 2009, approx. 5640 kg Item 2: Assembly Lisec VZ Line 2 Item 3: Air cushion table Lisec LKT-45/45TS, year of construction 2009, 61.28 kVA, approx. 3200 kg Item 4: Laminated glass cutting bridge Lisec VB-33, year of construction 2009, 17.00 kVA, approx. 2200 kg Item 5: Film overhang removal Lisec FASV-33, year of construction 2016, 0.83 kVA Item 6: Laminated glass cutting bridge Lisec VB-33, year of construction 2016, max. 43 kg/m2, 18.83 kVA, approx. 2200 kg Item 7: Stop and positioning station Lisec AL-32/33N, year of construction 2016, 25.88 kVA, approx. 1830 kg Item 8: Belt conveyor section Lisec BTA-20/26, year of construction 2016, max. 50 kg/m2, 6.08 kVA, approx. 1020 kg Float glass cutting Item 9: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 6.08 kVA, approx. 1020 kg Item 10: Belt conveyor section Lisec BTA-40/26 Item 11: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 9.05 kVA, approx. 1020 kg Item 12: Manual breaking table Lisec BTS-37/33, year of construction 2016, 15.75 kVA, approx. 1543 kg Item 13: Air cushion table Lisec LKT-10/33, year of construction 2016, max. 33 kg/m2, 4.50 kVA, approx. 250 kg Pgods Af Aqwjpfx Ag Reu Item 14: Belt conveyor section Lisec BTA-40/26, year of construction 2009, max. 50 kg/m2, 2.30 kVA, approx. 1154 kg Item 15: Breaking unit Lisec TBY-26/12, year of construction 2009, approx. 255 kg Item 16: Conveyor section Lisec RWF-33/25, year of construction 2009, 4.59 kVA, approx. 975 kg Item 17: Belt conveyor section Lisec BTA-30/33, year of construction 2009, 2.30 kVA, approx. 980 kg Item 18: Assembly Lisec RBA-25, year of construction 2009, 1.46 kVA, approx. 820 kg Item 19: Breaking unit Lisec TBX-33/12, year of construction 2009, approx. 290 kg Item 20: Belt conveyor section Lisec BTA-60/33, year of construction 2009, 18.22 kVA, approx. 1560 kg Item 21: Automatic breaking station Lisec ARS-33, year of construction 2009, approx. 580 kg Item 22: Automatic cutting table Lisec ESL-60/30RS, year of construction 2009, max. 33 kg/m2, 14.90 kVA, approx. 6380 kg Total weight approx. 40000 kg Sale on behalf of customer, ex location near 97076 Würzburg, without dismantling, transport and assembly On-site inspection is possible and recommended Any warranty is excluded, sold as seen / as is

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 10960000423, For sale is a CNC universal milling machine, type Deckel Maho DMU 60T, manufactured in 1999. This machine stands out due to its robust design (cross slide) and is ideal for toolmaking, prototype production, training, or as a versatile workhorse in the workshop. The machine is in good condition and can be inspected while powered on after prior arrangement. Equipment: - Rigid T-slot table - Precision vise - Control panel with Heidenhain control Accessories: - Workbench (4 drawers, 1 door) with attached bench vise - Stool - Tool clamping devices Attractive offer – flexible & worry-free We offer not only a high-quality product but also customized financing options that can be tailored to your needs. Whether it's a down payment, installment payments, or individual financing models, we will work together to find the right solution. Pedpfx Agj Ad Apqj Rjgu Upon request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes and errors!