Used Pressure Regulator Intermediate Plate for sale (27,453)

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) Dedpsw Hhwwefx Ab Tjkp • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Dkodpfxszd A Rde Ab Tsp Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, overall weight: 1,800 kg, production capacity: 1,350 unit/h, No minimum price – guaranteed sale to the highest bidder! Automatic, linear, electro-pneumatic counter-pressure filling and sealing system + rinser, infeed conveyor, and automatic labeling system from the manufacturer ENOS! Note: The seller will handle the dismantling of the machine. The buyer is responsible for loading the machine for transport. TECHNICAL DETAILS Production capacity: 1,350 units/hour MACHINE DETAILS Input voltage: 400 V Dkodpfxszh Dtbs Ab Top Operating pressure: 8 bar Input frequency: 50 Hz Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,200 x 2,100 mm Total weight: 1,800 kg EQUIPMENT Rinser Infeed conveyor Automatic labeling system

Condition: used, Year of construction: 2005, total length: 7,800 mm, total width: 1,700 mm, total height: 1,580 mm, Colour: Green Empty weight: 11.000 kg Price: On request Dksdpfxszkkrvs Ab Top - Year: 2005 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 12 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 2500 - Top roll diameter [mm]: 360 - Bottom roll diameter [mm]: 300 - Transport dimensions: 7800mm x 1700mm x 1580mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, engine output 5 kW saw-blade dia. 300-350 mm Dedpowli Nrjfx Ab Tekp Working speed 0-40 m/min weight ca. 1.300 – 1.800 kg kg

Condition: excellent (used), electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate Dksdpjzka Uaofx Ab Tep -Clamping surface: Ø 1600 mm -Plate height: 70 mm -Control unit: Type ST214 -Remote control: Type KEYBOARD ST210 -Connection: 400 volts -Magnetic plate weight: 960 kg -Dimensions: 1650/1600/H270 mm -Weight: 997 kg

Condition: excellent (used), Very heavy-duty and stable mobile welding table / straightening table from a vocational training center. Table dimensions (L x W x H): 2600 x 1600 x 920 mm Table top thickness: 50 mm Ribbing under the table top: 60 mm Weight: 1800 kg The table can, of course, also be fixed to the existing table legs. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Dedpfx Aezbithjb Tskp DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used roller, 1 meter wide Type: MRB 1001 E Dsdpfx Abszi Sa Ss Tjkp Capacity: 1050 x 1 mm (steel) Electric drive, left and right Year of manufacture: 2011

Condition: good (used), Table size: 2000 x 1000 x 120 Dimensions: 2100 x 1080 x 860 Weight: approx. 1.9 t T-slot: 14 mm, 3x T-slot spacing: 350 mm center to center Dsdpfx Abozi R E Tj Tskp

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Dkjdpfjzi Ra Rex Ab Tsp Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), PERMANENT CIRCULAR MAGNET with radial pole pitch Technical data: Djdpszi A U Tofx Ab Tjkp Diameter: 500 mm Height: 80 mm Features: Flange D: 370 mm, ISO50, M24 for KELLENBERGER cylindrical grinding machine Condition: good

Condition: ready for operation (used), Table width: 990 mm Djdezi A Umepfx Ab Tskp Table length: 1790 mm Overall thickness, including ribbing: 150 mm Table height: 940 mm

Condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, Radial fan pressure blower from friction disc friction washing system WTG75-15-500 -Type: Ø 600 mm -Motor: Unitec 15 kW / 2930 rpm -Volume flow rate: m³/min -Inlet connection: Ø 250 mm -Outlet connection: Ø 250 mm -Fan wheel: Ø 600 x 60 mm -Dimensions: 1000/800/H1100 mm -Weight: 343 kg Dodpfx Aoziz A Neb Tekp

Condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Pressure blower: Radial fan pressure blower -Type: Ø 420 mm -Motor: EMK 2.2 kW / 2915 rpm -Volume flow rate: m³/min -Inlet connection: Ø 150 mm Dksdpjziz Avjfx Ab Tjp -Outlet connection: Ø 150 mm -Fan wheel: Ø 420 x 40 mm -Dimensions: 650/560/H760 mm -Weight: 103 kg

Condition: used, Technical details: Dsdpeu N D Naofx Ab Tokp Length: 800 mm width: 315 mm voltage: 110 V clamping surface area: 795 x 315 mm current: 1 A weight of the machine approx.: 130 kg dimensions L x W x H: 0,85 x 0,35 x 0,09 m Magnetic clamping plate Magnetic strips 18x, width 20mm, distance 40mm *

Condition: good (used), 2 pcs. AMF grid panel, 415 mm x 740 mm, height 50 mm. Grid: 40 x 40 mm, with 16 H7 pilot holes and M12 threads. With cast support under the panel, height 100 mm. Djdpfeziwzhjx Ab Tekp

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. Dksdpfx Aoziww Njb Top The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm T-slots: 20 mm T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Dkedpfx Aszinz Seb Tep Good condition

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun Dkodpfxezinzle Ab Tep - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Condition: used, Pressure testing system for pipes Dkjdpezim N Iofx Ab Tep

Condition: new, Unused Alfa Laval model AQ4T-BFG approximately 15sqmt heat transfer area 316L stainless steel plate heat exchanger. Unit rated 12 bar design pressure at 150 deg.c. Dodjzimvuepfx Ab Tjkp

Condition: ready for operation (used), Plate size: 1200 x 800 mm Plate thickness: 200 mm Dkedpfxjzibr Rj Ab Tep 1 T-slot running continuously along the length: 12 mm Table height: 960 mm

Condition: new, Year of construction: 2026, usable tank capacity: 250 l, Equipment: CE marking, New COSMOS 250 emulsion reactor, manufactured by COMQUIMA in 2026. Stainless steel skid, AISI 316 in all parts in contact with the product, with a useful capacity of 250 liters. It consists of a jacketed reactor and an agitation system with scrapers and homogenization: AGITATION: Dkjdpfx Aozkkchob Tsp FULLVISC system with laminar flow and scrapers. Exclusive design with 3 arms and scrapers. Nominal speed of 40 rpm and power of 4 kW. HOMOGENIZATION: High shear emulsifier M.X.O.N. 120. Mechanical seal with safety sealing. Nominal speed of 2,900 rpm and power of 5.5 kW. Designed to centralize the production of fine emulsions, suspensions, and high-viscosity products in a single unit, which can be easily handled with a pallet truck or forklift. It allows processing products up to 70,000 cps and achieving a particle size of 10 μm. The unit is controlled by an integrated control panel and includes a vacuum pump, CIP cleaning balls, load cells in the legs, and hydraulic pistons for lifting the upper bottom. Optionally, a temperature control system can be added to carry out the heating and cooling of the jacket.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, A new, unused centrifugal fan from Elektror is offered for sale here. This was bought for one of our projects but was never used. Dkedjkt S S Nspfx Ab Tjp Availability: In stock Quantity: 1 piece Further information can be found on the nameplates. Feel free to contact us if you have any questions.

Condition: good (used), Year of construction: 1980, 13 rolls, diameter 140 mm plate width: max. 2.000 mm Dkedpfx Abednzr Uj Top plate thickness: 4 - 10 mm