Used Oil Mist Separator,Oil Mist Extractor for sale (13,171)

Condition: good (used), Oil-water separation system for compressor condensate. Height: 1000 mm Width: 500 mm Depth: 500 mm Weight: approx. 20 kg Condition: good, second-hand Ndjdpfx Afezqc Uvo Seb

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Nedpfx Aozlktpjf Ssdb Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: good (used), Max. External Dimensions: Diameter: 580 mm Height: 1160 mm Ndedpfx Afezqc E Uj Sjb Weight: approx. 50 kg Condition: good, second-hand

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Ndodpfxey Dpfwo Af Seb Filter surface: 2 m2 Weight: 248 kg Condition: very good

Condition: used, Industrial Extraction Fan, SARA UC 2 SD Serie II Industrial Oil Mist and Emulsion Mist Extraction Unit, Used Machine Overall Dimensions Width: 740 mm Depth: 550 mm Height: 720 mm Manufacturer / Distributor H. Sartorius Nachf. GmbH & Co. (Germany) Model SARA UC 2 SD Serie II Technical Specifications Year of Manufacture: 2002 Serial Number: 02-6-338 Ndedpjzgiakjfx Af Ssb Power Supply: 3~ 400 V AC / 50 Hz (Three-phase) Rated Current: 1.9 A Power Output: 0.9 kW Motor Speed: 2750 RPM Airflow Capacity: 1000–2000 m³/h

Condition: good (used), We are offering a BEKO Öwamat 4 here. Technical data and specifications: Subject to change without notice. Please contact us for a quote. Ndjdjxtu Nkjpfx Af Sjb

Condition: excellent (used), Dust and mist extractor IMAS Ndjdpjyw Hrbofx Af Ssb

Condition: like new (used), Year of construction: 2011, functionality: fully functional, volume flow: 230,000 m³/h, nominal power (apparent): 22 kVA, For sale: filter for removing haze from paint. Fine dust filter. Ndodpezhbqqefx Af Seb

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Application Areas: CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist Ndedpjd Nwk Uefx Af Sjb 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Year of construction: 2016, condition: good (used), machine/vehicle number: 3385, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the Nsdpfx Afoqmmkks Sodb scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Year of construction: 2017, condition: good (used), machine/vehicle number: 4066, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. Ndsdeqmmvcspfx Af Sob The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Year of construction: 2017, condition: good (used), machine/vehicle number: 4068, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Ndedjqmmvropfx Af Ssb Price on request.

Year of construction: 2013, condition: good (used), machine/vehicle number: 3063, The cost-effective drainage of condensate for your compressor. Ndodpfeqmmffjx Af Ssb The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Year of construction: 2017, condition: good (used), machine/vehicle number: 4789, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Njdsqmmcgspfx Af Sjdb Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment Ndjdpfxsv Ta D De Af Sjb The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Condition: new, Oil mist filters Donaldson DMC-MMB, 7 units available / Oil mist filter Absolent A.mist10 Nsdey H Exfopfx Af Sodb

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology Ndjdsu T Hrpepfx Af Seb with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Year of construction: 1980, condition: good (used), Oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 1615 2653 -Pressure: max. 11 bar -Dimensions: 315/200/H500 mm -Weight: 22.2 kg Ndedpfx Aszt I Rzsf Sjb

Condition: excellent (used), Servatechnik extraction Ndjdpfxsx Nbnne Af Seb

Year of construction: 2018, condition: new, Condensate treatment: new Kaeser oil/water separator CF 38 Technical data: max. flow rate for oil-cooled screw compressors and oil types in climate zone 2 (= Central & Southern Europe, parts of South America, North Africa): 22.5 m³/min for the oil types S-460, MOL, MOH, PAO, VCL 29.3 m³/min for the oil type VDL Tank size (volume): 115.5 l Filling volume: 84.3 l Condensate inlet connection: 3 x DN 13; 1 x DN 25 Water drain connection: DN 40 Oil drain connection: DN 40 Oil collection container: 2 x 10 l Ndsdpfxsdmqy Io Af Ssb Weight: 36.5 kg Dimensions W x D x H: 530 x 764 x 1090

Condition: like new (used), Year of construction: 2019, operating hours: 7,300 h, machine/vehicle number: IntNr231648, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2019, with only approximately 7,300 operating hours. Technical data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Machine type: CNC Swiss-type automatic lathe Year of manufacture: 2019 Control system: FANUC 31i-B Number of CNC axes: 8 Number of spindles: 2 Operating hours: approx. 7,300 h Condition: very good Main spindle Max. bar diameter: 13 mm Max. machining length: approx. 190 mm Max. spindle speed: 15,000 min⁻¹ Spindle drive power: approx. 4 kW C-axis Counter spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 min⁻¹ Drive power: approx. 4 kW C-axis resolution: 0.001° Tool turret 1 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Tool turret 2 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Front machining up to 4 tool positions Rear/opposite-side machining Up to 8 tool positions Of which up to 4 are driven positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Kraft & Bauer fire extinguishing system ELBARON oil mist separator Nedpfx Afsz Er Tno Sedb Supply voltage: 400 V The machine can be inspected while powered on by prior arrangement. Subject to changes, errors and prior sale!

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 Ndodpfx Aev Aip Uof Sjb -Dimensions: 530/480/H1000 mm -Weight: 22 kg

Condition: like new (used), Year of construction: 2016, operating hours: 9,300 h, machine/vehicle number: IntNr231649, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2016, with only approximately 9,300 operating hours. Technical Data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Machine Type: CNC Swiss-type automatic lathe Year of Manufacture: 2016 Control System: FANUC 31i-B Number of CNC Axes: 8 Number of Spindles: 2 Operating Hours: approx. 9,300 h Condition: very good Main Spindle Max. bar diameter: 13 mm Max. machining length: approx. 190 mm Max. spindle speed: 15,000 rpm Spindle drive power: approx. 4 kW C-axis Counter-Spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 rpm Drive power: approx. 4 kW C-axis resolution: 0.001° Tool Carrier 1 8 tool positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 1 kW Tool Carrier 2 8 tool positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 1 kW Front machining Up to 4 tool positions Rear/Opposite-side machining Up to 8 tool positions Ndsdpfjz Er A Njx Af Sjb Of which, up to 4 are driven positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Kraft & Bauer fire extinguishing system ELBARON oil mist separator Supply voltage: 400 V The machine can be inspected under power by prior appointment. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer:BEKO, oil-water separation system Oil and water separation device type Öwamat KT 05 Nodpetxkvrsfx Af Sodb -Accessories: incl. Oekosorb replacement filter, see photos -Dimensions: Ø 680 x 1130 mm -Weight: 73 kg with pallet

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg Ndsdeq Ei Dbepfx Af Sob