Used Mul Sf 3 for sale (66,421)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Lodpfjz Ag A Iox Ab Ashn Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: good (used), Year of construction: 2003, functionality: fully functional, Bored to Ø 36 mm 6 spindles KADIGO tool monitoring system with IEMCA PRA 52/42 F bar loader (4m bars) Accessories Lsdezdttispfx Ab Aehn

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Lodpfxez Agzde Ab Aohn Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Lhedpfx Aboz Agzqo Aon Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (max.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum bar capacity: 32 mm Maximum bar feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Spindle speed for turning: 200–3,150 rpm Spindle speed for right-hand thread cutting: 11.2–1,575 rpm MACHINE DETAILS Coolant capacity: 600 l Lhsdpjz Agz Djfx Ab Aon Pump output: 170 l/min Dimensions & Weight Required space: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Tool holders Additional accessories

Condition: used, mileage: 1,001 km, first registration: 01/2009, color: red, driver cabin: other, gearing type: other, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Year of construction: 2009, Vehicle location: Bovenden, steel superstructure, loading system on the left, drop-side flaps. Superstructure: 3-way tipper body from Schwarzmüller with loading system on the left and pneumatic tailgate opening. Left side wall: steel / Right side wall: aluminum. Approx. 11 m³. Removed from an Actros 2648 tractor unit, 6x4. Year of manufacture cannot be determined exactly, as no identification plate is available. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Lhjdpfj Aarbuex Ab Aon

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Lhodpfx Abjz Ag Abj Asn Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: good (used), Year of construction: 1990, functionality: fully functional, Extraction system/bag filter, type 244300 NAsf 4/3, year of manufacture 1990, equipped with new fan blades. Fan is flange-mounted, filter area approx. 26 m², with 4 bags. 3 kW. Machine subject to differential VAT. Ljdpfexf H Ayjx Ab Ashn

Condition: ready for operation (used), D'Andrea T100 Planing and Turning Head for Fehlmann SF32 Head diameter: 102mm Radial adjustment of the tool slide: 30mm Lhjdpjz H Iz Djfx Ab Aon Max. planing diameter: 200mm Max. speed: 1500 rpm Accuracy: 0.005 mm Net weight: 4.6 kg Tool holder: SF 32 Fehlmann You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Stack Lift Polar SFA-3 Stapellift  / Stack Lift Polar SFA-3 Baujahr / Year 2001 - Serial-No. 7177002 Tragfähigkeit / Carrying apacity max. 1000kg Lichtschranke / Light barrier Lhjdpfx Ajz H A Acob Ajn Sehr guter Zustand / Very good condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, maximum load weight: 27,020 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2009, loading space width: 2,480 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Construction description* Manufacturer: Schwarzmüller, Type: X303 / X-Series * 3-axle semi-trailer, vehicle class O4 * High-quality steel frame welded construction * Wheelbase 1,310 / 1,310 mm * Overall length approx. 13,840 mm * Overall width approx. 2,550 mm * Overall height approx. 4,000 mm * Fifth wheel height approx. 1,200 mm * Distance from kingpin to center of 1st axle: 6,440 mm * Track width front and rear: 1,950 mm each * 12 pairs of recessed lashing eyes according to UVV * 2 mechanical support winches at the front * Rear impact protection * 2 chock blocks * Retractable drawbar hook at the rear * Plastic mudguards * Aluminum combination rub rail * Steel underrun protection * Lateral impact protection * Spare wheel holder * Plastic toolbox * Rear marker boards Chassis* Air suspension low-loader unit * Low-maintenance drum brake axles * Lifting and lowering device * 3 axles with single tires * Tires 235/75 R17.5 140J * Steel rims 6.75 x 17.5 inches Braking system* Two-line compressed air braking system * With automatic load-dependent brake force control * With ABS and EBS * Operating pressure 6.5 bar * Spring-loaded parking brake * Parking brake on the 2nd and 3rd axles Floor* Wooden floor made of spruce, laid lengthwise with tongue and groove * Screen-printed top layer with flush outer frame Body and sliding tarpaulin* Fixed aluminum hollow profile front wall * Front wall with aluminum corner posts * Bolted rear portal with aluminum corner posts * Double doors at the rear * 6 sliding center posts * 4 rows of locking slats * Bilateral plastic sliding tarpaulins * Strap reinforcement with direct tensioning buckles * Front and rear rod tensioning closure * Tensioning gear at the front Lsdpfjz Shibsx Ab Aohn * Eccentric locking mechanism at the rear * Edscha sliding tarp system "LITE" * Bilateral aluminum special guide rail profile * Light-transmitting plastic tarpaulin roof Electrical system* 24-volt electrical system * 7-chamber tail lights * Design according to EU directives Paintwork* Steel grit blasting * Zinc dust primer * Painting with 2-component commercial vehicle acrylic paint * Color of chassis and body: Gray Weights* Technically permissible total weight: 39,000 kg * Permissible total weight according to vehicle data sheet: 34,000 kg * Permissible payload according to vehicle data sheet: 27,020 kg * Unladen weight according to vehicle data sheet: approx. 6,980 kg * Fifth wheel load: 12,000 kg * Axle load: 3 x 9,000 kg

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Outfeed height 5.800 mm Lodpfx Aez Rl D Sjb Ajhn Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: used, functionality: fully functional, Year of construction: 1997, load capacity: 13,500 kg, Heavy-duty trailer Lsdpez N N Ewsfx Ab Aehn Condition: Ready for use and fully functional Technical condition: good Description: 2-axle, 3-way tipper trailer from SCHWARZMÜLLER with aluminum walls - - - Payload 13.5 tons - - - Tare weight 4.5 tons - - - Year of manufacture 1997 - - - Walls can be swung and folded open - - - Rear wall opens automatically - - - 1st wall: 80 cm aluminum, original Schwarzmüller - - - Extension walls: 60 cm aluminum - - - Undercarriage and platform base have already been sandblasted, primed, and painted - - - 2-circuit compressed air system - - - Lighting system - - - Internal platform dimensions: width 2.42 m, length 5 m - - - Tires approximately 80% - - - with Austrian registration documents.

Condition: used, *Filter area: 3 m2 Installed power: 2,45 kW Horizontal disk filter with manual discharge system* This filter uses the horizontal disc system, the only type able to ensure the panel is undamaged even by accidental interruptions in filtration. There is no risk to the panel even in the event of incorrect operation or power cuts. The liquid in the vessel, batching unit and pipes is filtered perfectly at the end of work using a special disc for the purpose. The special filter unit used means that cleaning can be carried out simply using a jet of water and the sped al chute supplied. Manufactured in stainless steel throughout, including the feed pump, pipes, valves and caster-mounted frame. Lhodpfxjz N Euhj Ab Aen Complete kieselgur batching system with vanable delivery piston pump and stainless steel tank with built-in electric mixer. Electric panel complete with every control and safety device required for safe, dependable operation.

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43, turning diameter over cross slide: 32 mm, number of spindles: 6, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Ledpfsyybcasx Ab Aehn Swing diameter over cross slide: 32 mm Max. spindle speed: 3,150 rpm Number of spindles: 6 Round bar capacity: 32 mm Square bar capacity: 22 mm Hexagonal bar capacity: 27 mm Max. bar feed: 125 mm Max. travel long slide: 100 mm Maximum number of parts: 35 Machining speed: from 1.12 s to 125 s Spindle speeds: from 200 rpm to 3,150 rpm Number (steps): 49 Machining time: from 0.63 s to 200 s MACHINE DETAILS Voltage: 50 Hz, 3x 380 V Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 3,850 x 1,390 x 2,200 mm Weight: approx. 8,000 kg EQUIPMENT Knoll AE 1114 high-pressure system Filtration system 5-bar and 40-bar pumps individually adjustable for processing stages Plate heat exchanger Lifting pump for chip conveyor

Condition: used, maximum load weight: 27,020 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2009, loading space width: 2,480 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Construction description* Manufacturer: Schwarzmüller, Type: X303 / X-Series * 3-axle semi-trailer, vehicle class O4 * High-quality steel frame welded construction * Wheelbase 1,310 / 1,310 mm * Overall length approx. 13,840 mm * Overall width approx. 2,550 mm * Overall height approx. 4,000 mm * Fifth wheel height approx. 1,200 mm * Distance from kingpin to center of 1st axle: 6,440 mm * Track width front and rear: 1,950 mm each * 12 pairs of recessed lashing eyes according to UVV * 2 mechanical support winches at the front * Rear impact protection Lhjdpfez S R R Hex Ab Aen * 2 chock blocks * Retractable drawbar hook at the rear * Plastic mudguards * Aluminum combination rub rail * Steel underrun protection * Lateral impact protection * Spare wheel holder * Plastic toolbox * Rear marker boards Chassis* Air suspension low-loader unit * Low-maintenance drum brake axles * Lifting and lowering device * 3 axles with single tires * Tires 235/75 R17.5 140J * Steel rims 6.75 x 17.5 inches Braking system* Two-line compressed air braking system * With automatic load-dependent brake force control * With ABS and EBS * Operating pressure 6.5 bar * Spring-loaded parking brake * Parking brake on the 2nd and 3rd axles Floor* Wooden floor made of spruce, laid lengthwise with tongue and groove * Screen-printed top layer with flush outer frame Body and sliding tarpaulin* Fixed aluminum hollow profile front wall * Front wall with aluminum corner posts * Bolted rear portal with aluminum corner posts * Double doors at the rear * 6 sliding center posts * 4 rows of locking slats * Bilateral plastic sliding tarpaulins * Strap reinforcement with direct tensioning buckles * Front and rear rod tensioning closure * Tensioning gear at the front * Eccentric locking mechanism at the rear * Edscha sliding tarp system "LITE" * Bilateral aluminum special guide rail profile * Light-transmitting plastic tarpaulin roof Electrical system* 24-volt electrical system * 7-chamber tail lights * Design according to EU directives Paintwork* Steel grit blasting * Zinc dust primer * Painting with 2-component commercial vehicle acrylic paint * Color of chassis and body: Gray Weights* Technically permissible total weight: 39,000 kg * Permissible total weight according to vehicle data sheet: 34,000 kg * Permissible payload according to vehicle data sheet: 27,020 kg * Unladen weight according to vehicle data sheet: approx. 6,980 kg * Fifth wheel load: 12,000 kg * Axle load: 3 x 9,000 kg

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Lhjdpfx Aow Nklheb Aon Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, maximum load weight: 17,740 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 08/2016, Equipment: ABS, Müller-Mitteltal T3 Profi 30.0 Lhodez Shvnjpfx Ab Aen 3-axle, hydraulic ramps, twin tires, BPW axles, extendable, drum brakes, ABS. Payload: 17,740 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50984, 3 rows of 8 filters 4 bags Filter area: 31.2 m² RH 3500 mm Lsdoiamtpspfx Ab Ajhn Fan: 5.5 kW Diameter: 250 mm, reduced to 300 x 240 mm Mounting brackets Feet Lid and filter hoses Unfortunately, we cannot respond to inquiries that do not include complete contact information.

Condition: used, first registration: 12/2010, Year of construction: 2010, Schwarzmüller short ADR 3-axle container chassis for special acid containers • ABS • Air suspension • 3 x Mercedes - 9 ton axles • 1st axle liftable • Lifting/lowering device • Tires: 385/55 R 22.5 • Unladen weight: 3,650 kg • 36,000 kg gross vehicle weight (39,000 kg technically possible) • Dimensions: 8,200 x 2,550 mm Lhedpewmn U Aefx Ab Asn - German trailer - TÜV / HU / SP available upon request and at an additional cost: new! Subject to errors and prior sale!

Condition: used, axle configuration: 3 axles, first registration: 11/2003, suspension: air, tire size: 385/65 R 22.5, Year of construction: 2003, Equipment: ABS, = Additional options and accessories = - Lifting axle - Air suspension = Further information = Axle configuration Tire size: 385/65 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth, left: 25%; Tire tread depth, right: 25% Rear axle 2: Tire tread depth, left: 20%; Tire tread depth, right: 20% Lhedpfx Abszntr To Ajn Rear axle 3: Tire tread depth, left: 30%; Tire tread depth, right: 30% Weights Unladen weight: 5,550 kg Payload: 37,450 kg GVW: 43,000 kg Condition Damage: None Identification License plate: OH-74-JB

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition Lsdpfetrhq Hex Ab Ajhn

Condition: used, maximum load weight: 10,080 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 08/2017, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, loading space volume: 6 m³, Year of construction: 2017, Equipment: ABS, Stock number 5820 Müller-Mitteltal 3-sided steel tandem tipping trailer / aluminum ramps / galvanized chassis / wide tires! ----* Manufacturer: Müller-Mitteltal * Type: KA-TA-R 13,5 * First registration: 08/2017 * Total weight: 13,500 kg * Unladen weight according to vehicle registration: 3,420 kg * Payload: 10,080 kg * Axles: 2 x Gigant / drum brakes * Suspension: leaf spring suspension * Tires: 385/55 R 19.5 approx. 50% on steel rims * EBS * Color: galvanized chassis, tipping body blue * Tipping body interior: approx. 6 m³ (5.00 m long x 2.42 m wide x 0.50 m high) * Extendable aluminum ramps * Towing hitch with 50 mm eye, height-adjustable * Tipping body with 4 pairs of foldable lashing eyes in the floor * Full-load support at the front * Additional supports at the rear (foldable) * Tool box at the front right Ljdpjzdm S Sofx Ab Ajhn * Quarter fenders * Load securing certificate * 1st owner German trailer!! German documents!! 1st owner!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, Year of construction: 2009, Schwarzmüller 3-sided tipper body Length approx. 6300mm Aluminum sides 800cm high, folding and swinging Aluminum extension walls Beautiful condition Lhodpfx Abst R S Acj Aon Errors and typing errors excepted!

Condition: used, maximum load weight: 13,770 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2020, next inspection (TÜV): 09/2027, loading space length: 5,000 mm, loading space width: 2,360 mm, loading space height: 900 mm, total length: 7,205 mm, total width: 2,550 mm, total height: 2,450 mm, Equipment: ABS, Tandem 3-way tipper ABS Aluminum sideboards, foldable Rear underrun protection, foldable Platform at the front of the headboard Air suspension GVWR 18,000 kg Curb weight 13,070 kg Tires 385/65R22.5, 50-60% tread Lhedpoz I Hvcefx Ab Asn Vehicle No. 2493. For inquiries regarding the trailer: in very good overall condition, first owner. No liability for typographical and data transmission errors. Subject to errors and prior sale. Daily cash purchase of used commercial vehicles, construction machinery, trailers, and semi-trailers manufactured from 2000-2026.