Used Mubea Profile Steel Shears With Hole Punch for sale (25,501)

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to Isdof Ek H Ujpfx Aqujau -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears Ijdpsfndy Nofx Aqueau -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Condition: used, Hand lever shears VEB Scherenbau Nossen type ScDH10 Blade length: 180 mm Ijdpfx Aqsuqrabouoau Sheet thickness: max. 10 mm Flat material: 50x15 mm square solid material: 22x22 mm Round steel: 24 mm Angle steel: 60x7mm T-steel: 60x7mm on mobile base frame Own weight: approx. 150 kg

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. Iajdpfx Aqouzv Tzjusu After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Iasdpfxox Hz Dqs Aqusu Including ramp

Condition: used, 30m³ stainless steel tank features a full-height stainless steel coil Diameter 2.97m Total height 5.40m Cylinder height 4.30cm Leg height 30cm Cone height 30cm Iajdpfxoyw Ub Rj Aqueu Gear motor height 50cm

Condition: like new (used), Vertical stainless steel storage tank 20 m3 with agitator, 4 ss legs, manhole, valve, pump, motor 10,6 kW.... Iodpfoiuc Skox Aqusau

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Length: 17.10m Iasdpjxqfwtofx Aquou

Condition: used, Year of construction: 2017, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Empty weight: 1.400 kg Steel round: 40mm Steel flat: 200x20mm / 300x15mm Notching + Punching + cutting - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 155976 - Drive system: Conventional - Punching force [ton]: 60 - Round bar cutting capacity [mm]: 40 - Motor power: 4.0kW - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Ijdpfowraazox Aqusau Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 tons - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm - with support table Isdpfx Aqjwxy Dgeusau

Condition: new, Year of construction: 2026, neu 2026 Ijdpswirahefx Aquoau 090222 September 2026, Zwischenv Spanien 15800 € 303.36 € 1 50 to 177 mm 5 1 31 x 12 mm 34 1/min 350 x 15 mm 80 x 8 mm 35 / 30 mm 10 mm 100 x 10 mm 3 kW 1300 mm 1100 mm 1850 mm 950 kg with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: used, Round bending machine PEDDINGHAUS BIFAX K for round steel and reinforcing steel Iaodpfjzclx Nex Aqusu Color: green Machine number: BXK 306941411 Condition: Used Location of the goods: Production hall Payment method: Advance payment / bank transfer Shipping: Self-collection at the designated pick-up location. No shipping possible!

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Isdpfx Ajzdnwpoqujau Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: used, Year of construction: 2007, GEKA HYD 110 Isdpeynkdujfx Aqusau

Condition: new, Year of construction: 2026, neu 2026 090194 prompt, Zwischenverkauf v Spanien 22400 € 430.08 € 1 1 60 to 250 mm 5 Iajdpfxjwirnxj Aqueu 40 x 11 mm 32 1/min 350 x 15 mm 120 x 10 mm 45 / 40 mm 10 mm max. 150x10 mm 5.5 kW 1850 mm 1300 mm 2100 mm 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Year of construction: 2009, condition: used, The machine is powered and can be inspected by appointment! Technical data / machine components: Year of manufacture: 12/2009 Manufacturer: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18-20 m long, approx. 3 m wide Weight, unpacked: 4.5 to 5 tons Horizontal loading magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, 90 mm wide, for holding the profiles, with a pusher 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Depth, max: 2,380 mm, length: 7,400 mm Loading weight, max: 1,000 kg Conveyor length: 1,850 mm Profile length, min: 1,000 mm Profile length, max: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveyor speed: 4 m/min Material stop on the left Magazine "empty" sensor, manual cycling Tactile switch for the first loading 5 pneumatic cylinders for aligning the profiles in the longitudinal direction 6 lifting rollers for lifting the profile from the loading magazine and transferring it to the pusher Pusher, electronically positionable feed system: Reinforced design Feed length, max: 9,000 mm Mounted on the right side of the machine Profile feed from right to left Guide profile with linear guide rail Carriage: plate construction with ball bearing carriage Drive via linear motor, positioning via magnetic strip Pneumatic material gripper All 8 profiles can be automatically clamped without adjustment Repeat accuracy: +/- 0.15 mm Rapid traverse speed, max: 180 m/min Input of the profile tube length into the control system 1 light barrier for detecting the beginning of the profile before the first punching head Punching unit: Iasdpfx Aqozbac Tjusu Drive: hydraulic Punching force per cylinder: 3.0 t, designed for 55 punching cycles per minute Only a maximum of 2 tools can be in operation Vertical punching head with 2 cylinders Punching stroke: 15 mm including 2 punching tools for hole ø 6.5 mm, spacing 65 mm Punching cylinders can be selected individually, guide for the profile 2 horizontal punching heads Punching stroke: 15 mm including 1 punching tool each for hole ø 6.5 mm and 1 punching tool for oblong hole 7 x 12 mm, guide for the profile Cycling lubrication system with 4 nozzles for lubricating the punches 3 l oil tank, level monitoring Saw: Drive: 5.5 kW, 400 V, 50 Hz Saw blade: ø 500 mm Saw feed: pneumatic with hydraulic control, from below Pneumatic profile clamping device: vertical and horizontal Cycling lubrication system with one nozzle Flap after the saw for removing cut-off pieces and scrap, max. 200 mm length Parts fall downwards into the provided box Longer scrap pieces are disposed of with good parts Needle marking system: Character size: 2 – 7 mm Marking window: 80 x 20 mm, 15 characters including spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Each profile can have a different designation

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kaltenbach KPS 506 CNC Flat Bar / Angle Punching / Shearing Line – Year 2007. 500mm Capacity Flat Bar. 160mm x 160mm Angle. Iedpfxezcqnij Aquoau 3 head Punch. Horizontal punch. 6 metres Gripper feed. Mitre Shearing.

Year of construction: 2008, condition: ready for operation (used), A CNC punching and cutting system Finn-Power in need of repair, including an automation and stacking system STR 6, is available. Punching force: 300kN, cutting force: 250kN, max. operating pressure: 300bar, max. material thickness: 8mm, max. punching diameter: 89mm, turret stations: 20, axis speed: 150m/min, positioning speed: +/-0.1mm, repeat accuracy: +/-0.05mm, machine weight: approx. 28000kg, operating hours: approx. 40342h. The thread-cutting unit is non-functional. Documentation available. An on-site inspection is possible. Isdozcp T Repfx Aquoau

Year of construction: 2026, condition: new, ‼️SONDERANGEBOT‼️HIER IN STOCK IN HEILBRONN! Only while stocks last! ‼️SOFORT AVAILABLE ‼️AUF LAGER‼️ Powerful, robust machine at an affordable price from Josan & Söhne Alligator shears small: ➡️3 kw motor ➡️7 up to 8 shear strokes per minute. ➡️Maße 1100x980x800 mm ➡️Gewicht approx. 275 kg ➡️Spannweite 15cm ➡️Messer can be turned over at some point when they are blunt, allowing you to work with them for longer ➡️UVV (accident prevention regulation) made by German company here Net 3.999,00€ +19% VAT 759,81€ Gross 4.758,81€ Ijdpsp E Ehqofx Aquoau Alligator scissors large: ➡️Motor 7,5 kw ➡️30 cm span ➡️7 up to 8 shear strokes per minute. ➡️Maße 249x109x174 cm ➡️Gewicht approx. 1500 kg ➡️Messer can be turned over at some point when they are blunt and thus work longer with them ➡️630 KN pressure ➡️Hydraulikdruck 21 mpa ➡️UVV (accident prevention regulation) made by German company here PRICE ON REQUEST Pictures/equipment may vary. Errors/changes excepted

Condition: good (used), The scope of delivery includes: 01x square tube, used Material color: sendzimir galvanized Total height: approx. 5,560 mm Square profile: 140 x 140 mm Material thickness: 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm Note: Some of the square tubes are doubled at a height of 4,910 mm or 5,010 mm are doubled up. Ijdpferxb R Nox Aquoau Currently available from stock: approx. 101 pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Iajdpfx Aqehvz D Hsusu Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized profile length: approx. 1.750 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,950 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: ready for operation (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here a used CS Sigma profile for sale. The indicated price refers to a price per piece. Included in delivery is: 01x CS Sigma profile, used material colour: cream white profile length: approx. 2.200 mm CS profile dim.: approx. 150 x 50 x 15 mm material thickness: approx. 2,25 mm weight / pcs.: approx. 10,500 kg The CS Sigma profiles can be bent, or show slight damage or Iaodpsgfbyzefx Aquju slight damage or rust. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), The scope of delivery includes: 01x Sigma profile, used material colour: galvanized total length: approx. 850 - 1.050 mm Profile: CS300 The Sigma profiles were cut on one or both sides! There are different lengths and material thicknesses available, which are not sorted out. General information about the article: This item is offered for pickup only. A beyond that desired transport or a dispatch of this article is connected with additional costs, which can be inquired separately Isdpfehktdlex Aqujau depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x rectangular tube, used profile dim.: approx. 50 x 30 mm Material color: orange total length: approx. 3.660 mm center-center-hole: approx. 3.630 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill hole Ø: approx. 10 mm Weight / pc.: 6,150 Kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: Iasdendiqdspfx Aqusu This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.650 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading) Isdpfshwduxox Aqusau