Used Merck Merck Millipore Direct Detect Spectrometer for sale (6,299)

Condition: excellent (used), The device performed only 140 measurements. NITON XL3t 980 GOLDD+ – a portable X-ray analyzer with a next-generation SDD detector featuring GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral databases for alloys enables the identification of stainless steels, tool steels, chromium-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, and zinc, zirconium, and aluminum alloys. The analyzer provides very fast measurement. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys such as: cast alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all iron-based alloys (0.00x% – 100%) and non-ferrous metal-based alloys (0.00x% – 100%) and rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x%-100%). The NITON XL3t 980 GOLDD+ analyzer operates based on BASIC PARAMETERS, meaning that it calculates the percentage content of elements based on a mathematical equation. Todpfx Aezlcciecnjb The analyzer also allows for the development of its own analytical programs: an identification program that assigns a name, symbol, number, etc., to a known sample, and such samples will be identified by that name. a program for quantitative chemical analysis (SuperChem Teach Mode) – based on its own standards, we create our own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch-screen display. The screen is color and tiltable, which facilitates reading the results during field work. It includes an integrated scanner and backlit alphanumeric sample identification codes. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two interchangeable batteries. One battery enables continuous operation for 8-10 hours without the need to recharge. It has two libraries, 900 and 800.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 606300, Year of construction: 2019, operating hours: 3,925 h, load capacity: 3,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,550 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,500 mm MACHINE DETAILS Mast type: Simplex Todpfxozu Nklj Acnjb Fuel type: electric Engine power: 2 x 25 kW Battery year of manufacture: 2023 Battery voltage: 80 V Overall height: 3,550 mm Machine weight: 14,900 kg EQUIPMENT Fork positioner Heater Full cabin

Condition: new, Year of construction: 2011, functionality: fully functional, Xtralis VESDA VLF-250 very early warning aspirating smoke detector, supplied together with an Apollo XP95 three-channel input/output module in a separate enclosure. The VESDA VLF-250 continuously draws air through a connected sampling pipe network and analyses it using laser-based smoke detection. It is designed for early fire detection in small, business-critical areas of up to 250 m², including server rooms, data centres, control rooms, electrical switch rooms, telecommunications facilities and air-handling installations. The included Apollo XP95 three-channel input/output unit provides independent monitoring of three input channels and independent control of three relay outputs. It is suitable for integration with compatible Apollo XP95 and Discovery fire alarm systems. Xtralis VESDA detector Manufacturer: Xtralis Product range: VESDA LaserFocus Model: VLF-250-00 Equipment type: Aspirating smoke detector Coverage area: up to 250 m² Supply voltage: 18–30 V DC Nominal voltage: 24 V DC Current consumption: approximately 220 mA nominal Current in alarm: approximately 295 mA Sensitivity range: 0.001–0.969 dB/m Maximum sampling pipe arrangement: 1 × 25 m pipe, or 2 × 15 m branches Maximum number of sampling holes: 12 Protection rating: IP30 Approximate dimensions: 256 × 183 × 92 mm Approximate weight: 2 kg Serial number: 88013225 Manufactured: January 2011 Made in: Malaysia The VLF-250 includes programmable alarm thresholds, ultrasonic airflow sensing, AutoLearn Smoke, AutoLearn Flow, an event log and an integral status display. Apollo input/output module Manufacturer: Apollo Fire Detectors Series: XP95 Model: XP95 3 Channel Input/Output Unit Number of input channels: 3 Number of relay output channels: 3 Supply voltage: 17–28 V DC Relay contact rating: 1 A at 30 V AC Operating temperature: –20°C to +70°C Protection rating: IP54 Compatible with: Apollo XP95 and Discovery systems Todpjzliwgefx Acnjb Made in: United Kingdom Separate enclosure included Apollo identifies part number 55000-588 as an obsolete legacy product, making this unit particularly suitable as a replacement or spare for existing XP95 installations. Condition- Used.

Condition: excellent (used), functionality: fully functional, TTK FG-SYS wall-mounted digital liquid leak detection and locating panel in a lockable metal enclosure. The unit is designed for continuous monitoring and precise location of conductive liquid leaks, including water, bases and acids, when used with compatible TTK sensing cables. It is suitable for data centres, server rooms, electrical rooms, commercial buildings, industrial facilities and other critical infrastructure. The FG-SYS can identify the location of a leak to approximately 1 metre, detect cable breaks and display alarm information on the integrated LCD screen. It can monitor up to 120 sensing-cable sections across three independent circuits, with a maximum cable length of 600 metres per circuit. Main features Manufacturer: TTK Model: FG-SYS Equipment type: Digital liquid leak detection and location panel Wall-mounted version Integrated LCD display and keypad Three independent sensing circuits Up to 40 sensing-cable sections per circuit Up to 120 sensing-cable sections in total Maximum monitored cable length: 1,800 m total Leak-location accuracy: approximately ±1 m Detection of leaks and sensing-cable breaks Audible and visual alarm indication 30-event alarm and fault history Eight configurable relay contacts Additional power-failure relay RS232 and RS422/RS485 communication JBUS/MODBUS connection for BMS integration Todszlixqjpfx Acnob Lockable metal enclosure The FG-SYS is compatible with TTK FG-EC and FG-AC digital sensing cables and can also support compatible analogue sensing cables through the appropriate interface boxes

Condition: new, REP. Direct access key module, PROFIBUS-DP Tedpfx Aezr T T Sjcnob 6FC5247-0AF11-0AA0 0.60000442 00076 # SIEMENS

Condition: used, Pneumatic valves suitable for WEINIG type UNIVAR 10 or similar Standard operation on both sides or spring-return Technical data: Todpfxjzrxlao Acneb - Number: 27

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, The authorized SUBARU dealer in Łaziska Górne has a 2012 Vermeer D9x13 Series 2 horizontal directional drilling rig for sale, with 5650 operating hours. We specialize in importing and selling Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. We offer all forms of payment: Leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the machine away from the showroom immediately. In addition, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. For more information about our services, please contact our sales representatives. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 hp / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle rotation speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Additionally available: We also have a small Ditch Witch FT5 drilling fluid tank/mixer from 2021, which is a perfect match for this model and constitutes a practical set for carrying out small and medium-sized directional drilling projects. Tedpjzumt Rjfx Acnsb Ditch Witch FT5 – basic data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 hp Dimensions: approximately 185 × 81 × 136 cm Curb weight: approximately 182 kg It is possible to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid tank. The stated price is net and applies to export and to companies. A significant discount is available for individual customers – Please contact us directly by phone to get your best price.

Condition: ready for operation (used), Functions according to the magnetic particle technology, with documentation and accessories, an inspection is possible. Tedpfx Ajq Npf Uecnjb

Year of construction: 2001, condition: ready for operation (used), Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible. Tedpfxorp E Nks Acnjb

Condition: ready for operation (used), Year of construction: 1998, Standard: IEC 34-1, rated power: 114.7kW, rated speed: 1,885rpm, duty type: S1 (continuous duty), insulation class: H-RISE F, armature voltage (Arm.): 460V, armature current (Arm.): 271A, excitation voltage (Exc.): 340V, excitation current (Exc.): 5.43A, protection class: IP23S (drip-proof, open ventilated), cooling: IC06 (forced ventilation by mounted fan), mounting arrangement: IM1001 (B3 foot-mounted design), weight: 455kg, standardized dimensions (IEC frame size 180), shaft height (H): 180mm, foot mounting hole spacing width (A): 279mm, foot mounting hole spacing length (B): 279mm (L version), shaft diameter (D): 48mm (optional 55mm reinforced version), shaft extension length (E): 110mm, mounting hole diameter (K): 15mm, CE marking available. An on-site inspection is possible. Tsdpfx Ajzavylecnob

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 3,220 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,860 mm, load center: 800 mm, fuel type: electric, mast type: duplex, battery capacity: 930 Ah, battery voltage: 48 V, fork carriage width: 2,840 mm, fork length: 1,600 mm, ground clearance: 130 mm, turning radius (outer): 1,950 mm, total height: 2,710 mm, total length: 2,840 mm, total width: 2,670 mm, color: white, Equipment: cabin, Electric four-way reach truck HUBTEX MQ 30, first owner, in very well-maintained condition: – Model MQ 30 AC / Series 2125-EL (larger model series) – Designed for the transport and stacking of wood-based panels – Load capacity 3000 kg at LSP 800 mm to H3 5000 mm – Load capacity 2670 kg at LSP 1050 mm to H3 5000 mm – NB = 1600 mm useful width – MV = 1700 mm mast extension – RB = 2670 mm frame width – b1 = 1040 + 30 mm front dimension – b2 = 1070 mm front dimension with reinforced fork carrier – RL = 2440 mm frame length – KÜ = 180 mm cab overhang – GL = 2840 mm overall length over fork carrier – Ra = 1340 mm wheel arm clearance – SH = 2500 mm height above driver protection roof (+300 mm) – Rh = 500 mm height wheel arms – BF = 130 mm ground clearance lower mast – Wa = 1950 mm turning radius – 3-stage lift mast H 60 TIL (very stable) – H1 = 2707 mm height of lift mast retracted – H2 = 1867 mm free lift – H3 = 5000 mm lift height (top of fork tines) – H4 = 5840 mm height of lift mast extended – VH = 840 mm height fork carrier – Intermediate lift limitation at H3 = 3900 mm – Long load fork carrier Type II, GTL = 2840 mm – Fork carrier in low and reinforced design – Fork adjustment hydraulically from 560 to 2840 mm (adjustable forks) – Fork tilt hydraulically +5 / –3 degrees – Fork tines (pair) length 1600 mm – Fork cross-section 50 x 150 mm – Multi-directional steering system H4 electronically controlled – 4 steering programs with longitudinal/lateral travel and circular/diagonal travel – Service brake as an automatic regenerative brake – Parking brake as an electro-magnetic parking brake – 4-wheel chassis with two vertical motors and heavy-duty load wheels – 2-piece swing axle with mechanical level compensation – Tires, drive side 2 x 457 x 200 mm Super-Elastic – Tires, load side 4 x 381 x 127 mm solid rubber – Motor control with three-phase motor and inverter – Drive power 2 x 4.0 kW – Working hydraulics with proportional valve technology, continuously adjustable – Lift power 14.0 kW – Steering power 4.0 kW – Operation via multi-function joystick – Driver's cabin as a lateral seat cabin Q850 with 830 x 850 mm – Entry and exit on the racking aisle side – Driver protection roof with laminated safety glass – Safety glass on the load side, front, and battery side – 2 work spotlights on the cabin roof – Comfort seat, vibration-damped, adjustable in multiple ways – On-board computer Hubtex HIT 2 – Paint finish RAL 9002 grey-white and RAL 7021 black-grey – Battery 48V 6EPzS 930 Ah – Battery charger D400G48/125 for 12-14 hours charging time – Aquamatic and filling station – Battery 48V 6PzS 930 Ah with tray renewed in 03/2021 – Year of manufacture 2006, operating hours original 3220 h – First owner, very well-maintained condition – Truck always stored in a heated hall – Regular maintenance by Hubtex – Last maintenance in 08/2025 at 3100 h – New maintenance possible upon agreement – Application was for feeding a wood-based panel saw – Sale due to automation of the panel saw Tedpfx Aezugt Rscnjb – Inspection and test run possible upon agreement – Sale from location Karlsruhe / Southern Germany

Condition: used, functionality: unexamined, machine/vehicle number: TSH 065 D, Used Pfeiffer TSH 065D with Mass Spectrometer. Complete set! Turbo pump: Pfeiffer TSH 065 D (Controller Pfeiffer TCP 015) Diaphragm pump: Vacuubrand MZ 2 NT Mass Spectrometer: Balzers QME 064 + Partial Pressure Gauge Printer: Philips PM8222 recorder Tedpfxsw H Np Io Acneb Complete with many vacuum components.

Condition: excellent (used), Hitachi X-MET8000 Optimum – Handheld XRF Spectrometer The device has only 119 measurements!!! For sale is a professional, portable Hitachi X-MET8000 Optimum (Oxford Instruments) X-ray fluorescence spectrometer from 2017, designed for fast and non-destructive analysis of elemental composition and identification of metal alloys. Tjdpeztpu Isfx Acneb Device condition: very good. The spectrometer is offered in a comprehensive set, including a carrying case, two batteries, a charger/power supply, accessories, documentation, and certified reference material from MBH Analytical. The device is equipped with Alloy_FP and Alloy_LE_FP calibrations. The Optimum model uses an SDD detector and a 6-position filter system, and its analytical range covers elements from Mg to U. Key data: Manufacturer: Hitachi High-Tech / Oxford Instruments Model: X-MET8000 Optimum Year of manufacture: 2017 Technology: XRF – X-ray fluorescence Condition: very good Calibrations: Alloy_FP, Alloy_LE_FP Elemental range: Mg–U Weight: approx. 1.5 kg with battery. The device has 119 measurements!!!

Condition: used, Permanent magnet DC servomotor INDRAMAT from MAHO milling machine Type: MDC 10.10H / MMA-0 (MDC10.10H/MMA-0) Serial No. 12423 Component No. 230837 K-M = 0.30 Nm/A Ieff = 11 A Tedjznn H Ejpfx Acneb Imax. = 75 A Umax. = 170 V n max = Maximum speed = 3000 rpm Tacho: 0.317 Vs/rad Shaft diameter: 22 mm Shaft length: approx. 21 mm (shaft extension from centering edge) Centering diameter: 70 mm, 7 mm height Bolt circle diameter: 92 mm, 4x M8 mounting screws Overall length: 270 mm (without shaft) Housing diameter: 133 mm Weight: approx. 20 kg Good condition

Year of construction: 2004, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 2917, Thermo Scientific ARL 3460 Spectrometer Thermo Scientific ARL 3460 optical emission spectrometer (OES) for sale. This unit was previously used in a foundry and was operational until it was replaced. The equipment is designed for rapid chemical analysis of metallic materials and was used in foundries and the metallurgical industry for quality control and composition verification. Features: • Brand: Thermo Scientific • Model: ARL 3460 • Equipment type: Optical emission spectrometer (Spark OES) • Year of commissioning: 2004 • Condition: operational until replacement • Origin: foundry / metallic material analysis • Maintenance: Annual maintenance inspections • Applications: quality control and chemical analysis of metals • Analytical capability: simultaneous analysis of multiple elements, depending on the line/installed configuration, including C, Mn, Si, P, S, Ni, Cr, Mo, N, Cu, W, Nb, V, Co, Al, Ti, and Fe • Common materials: iron, carbon steels, stainless steels, super duplex steels, nickel-based alloys, and other metallic alloys • Includes: PC, monitor, spare parts, and commonly used consumables available with the equipment • Reason for sale: equipment upgrade Additional information, photographs, and sales terms can be provided to interested parties. Tsdpfx Ajzdzgqjcnsb

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Tedpfexhgfgsx Acnsb Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET .

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp Tsdsnzhxqopfx Acnob 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: used, functionality: unexamined, machine/vehicle number: System 16, Used MDA Scientific System 16 Toxic Gas Monitor Manufacturer: MDA Scientific Inc. Model: System 16 Chemcassette Detection System / Toxic Gas Monitor Todow H Nudopfx Acnsb

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer DEVICE NEEDS TO BE RECONDITIONED PRIOR TO COMMISSIONING. Complete with MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Tsdpfxeym Dt Hj Acneb Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: good (used), Year of construction: 2005, EMCOMILL FB 6 (with digital scales X, Y, Z) Tsdpfx Aezln R Ejcnjb Tool milling machine with 18 spindle speeds from 63-3150 rpm, 18 feeds in the X, Y, Z axes, toolmaker accuracy according to DIN 8615, slide travels X/Y/Z 700/500/500 mm, power 5.5 kW (100% duty cycle), hydraulic tool clamping, tool holder DIN 69871 SK 40, electrical connection 400/50/3, incl. Heidenhain scales in X/Y/Z, machine complies with CE, without counter support, with work area protection Manufactured according to ISO 9001: 1994 Year of manufacture 2005 F4UT3901

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, color channels: CMYK, number of print heads: 2, We are offering this used Mimaki TxF300-75 DTF roll-to-roll printing machine and the accompanying Adkins dryer with powdering unit. Year of manufacture: 2024 Condition: Ready for use / currently still in operation. Otherwise, please see the photos. We also have other machines of the same design available. Todpozn Iqqefx Acnsb If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Thermo Fisher Scientific iCAP 6300 Duo ICP-OES Spectrometer Tedpfxjzki Ips Acnob Manufacturer: Thermo Fisher Scientific Model: iCAP 6300 Duo Series: iCAP 6000 Machine Type: ICP-OES Emission Spectrometer / Elemental Analyzer Part No.: 8423 100 63081 Origin: Made in England For sale is a used Thermo Fisher Scientific iCAP 6300 Duo ICP-OES emission spectrometer. This laboratory instrument is suitable for simultaneous multi-element analysis of liquid samples in laboratories, research institutions, quality assurance, and in the chemical, pharmaceutical, and metal processing industries. The Duo technology enables both axial and radial plasma observation and ensures high sensitivity with a wide linear measurement range. Technical Data Measurement Principle: ICP-OES (Optical Emission Spectrometry) Design: Duo (axial and radial plasma observation) Optics: Echelle Spectrometer Detector: CID86 Wavelength Range: 166 – 847 nm Spectral Bandwidth: approx. 0.007 nm Supply Voltage: 100 – 240 V AC Mains Frequency: 50 / 60 Hz Power Consumption: 4000 VA Dimensions (W × D × H): approx. 832 × 744 × 589 mm Weight: approx. 85.5 kg Equipment Echelle Optics CID86 Detector Duo Technology (axial / radial) Solid-State RF Generator Optics purging with nitrogen or argon Peristaltic Pump Water-cooled Spectrometer System Laboratory instrument for simultaneous multi-element analysis Accessories as shown in the pictures Application Areas Environmental analysis Water analysis Chemical analysis Metal analysis Pharmaceutical industry Food analysis Quality assurance Research and development Universities Testing laboratories Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table or other items not explicitly mentioned in the photos are not included in the sale. Scope of Delivery Thermo Fisher Scientific iCAP 6300 Duo ICP-OES Spectrometer Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2022, EMCOTURN E65 SMY - SIEMENS 3-AXIS CNC TURNING MACHINE WITH A TAILSTOCK AND POWERED TOOLS INCLUDING Y-AXIS AND C-AXIS Highly efficient universal turning machine for complete machining with stable and precise linear guides. State-of-the-art control technology Todpjzi Rr Tofx Acnob SINUMERIK 828D with ShopTurn dialog programming. Main spindle: • Connection A2-6" (DIN 55026) • Max. bar diameter: ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Tailstock: • Connection A2-6" (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: • 12-position tool turret VDI 30 radially arranged with direction logic for up to 12 powered tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40mm Includes: • Hollow chuck cylinder incl. draw tube • C-axis for main/tailstock • Mechanical spindle brakes • Sinumerik 828D control with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive / Ethernet - 15" multi-touch color monitor - 3D simulation, etc. • Coolant system incl. coolant pump (3.5 bar) • Chuck flushing (additional pump (3.5 bar)) • Part ejector and flushing through the tailstock • Air gun with spiral hose • LED machine bay light • Hydraulic unit • Interface for chip conveyor • Vibration-damping leveling feet • Mounting angle and high-performance anchor • Documentation / CE certificate Machine No. S6E222101 Year of manufacture: 2022 • Sinumerik 828D with dialog programming • Tool turret • 12-position tool turret VDI30 • Hollow chuck cylinder, C-axis for main and tailstock • Coolant system with coolant pump, part ejector • Hydraulic unit • Chip conveyor Jomatec 1200 mm • Tool breakage and wear monitoring • Part collection device • Short bar loader interface SL1200 • Tool measurement • 14 bar high-pressure coolant system • 3-jaw chuck BB-D 210/3 KK6 • Maximum machining length 175 mm • Maximum finished part diameter 65 mm • Maximum finished part weight 4.5 kg • Internal tool holder • Straight milling holder 90 mm • Angle drilling and milling holder • Door automation E 65

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Complete analysis using the stationary spark spectrometer SpectroMaxX: With the aid of the spark spectrometer, the alloy content and trace elements of macroscopic solid samples can be determined with high accuracy down to the ppm range. Description of the system: Open spark stand for high sample throughput Tjdpfxjzizdte Acnsb A wide variety of sample geometries are possible The following elements are available as a basis: Magnesium The analyzable elements and concentration levels depend on the methods available for the respective base element. Usable wavelength range: 170-670 nm Output of measurement values in concentrations or intensities Selectable output units (%, ppm) Output of statistical parameters (mean, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized for customer requirements Expansion with additional modules possible on-site Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption through argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate easily replaceable Temperature-absorbing design without water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power 4 kW Display system: Dedicated microcontroller for each CCD Serial interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic checking and identification of alloy/grade Result manager Online maintenance scheduler Environmental conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: 80%, non-condensing Atmosphere: free of corrosive fumes and high dust levels Spectrometer: 90-253 V 50/60Hz Data max. 400 VA during sparking Fuse: 16 A slow-blow Version: Tabletop Depth: 750 mm Width: 625 mm Height: 450 mm Weight: 77 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2023, condition: like new (used), Thermo Fisher Type: ARL easySpark Metal Analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software OXSAS is the most advanced software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of datasets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional In like-new condition Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grid/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples A groundbreaking spark excitation and optical design to ensure the best performance in its class An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Tsdpfoziar Nex Acnsb Compliance with safety and quality guidelines A simple design that is suitable for both new users in production and experienced laboratory staff The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. W x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.