Used Mann & Hummel 45 160 92 951 for sale (17,939)

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump -Manufacturer: Brinkmann, pressure booster pump type FH 45-54-05 -Drive: 3.3 kW -Speed: 2900 rpm Laodpfx Asy Ti E Aenuoc -Max. flow rate: 30 l/min -Max. delivery head: 168 m -Dimensions: 285/220/H1010 mm -Weight: 46 kg

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Laedoy R Nnfopfx Anuoc Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 1996, pressure 160 t distance between columns 1380 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1250 x 850 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 450 x 450 mm table height over floor 900 mm side window 250 x 400 mm ram surface 1350 x 850 mm speed down 400 mm/s speed up 350 mm/s working speed 50 mm/s oil volume 1850 l power requirement 58,0 + 11,0 kW Ljdpfxovut Ile Anujac weight 24,1 t dimensions (WxDxH) 2,85 x 2,15 x 4,6 m with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion / ejector in table, cutting impact cushioning, mechanical depth stop (motoric adjustable), ram interlocking

Condition: excellent (used), Year of construction: 2009, Very well maintained machine with few working hours, Contact possible also via WatsApp, We speak English German and ex YU languages. The machine is located in Germany. All machine specification is in pdf attachment Lodpfx Aer Idkwsnujac

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,028 mm, total width: 1,000 mm, Tested forklift battery for your forklift truck - 80V 6PZS 930Ah - DIN A + 1 year warranty + Includes Aquamatik water refilling system + Includes end cell connectors & REMA 320 plug (other plug types can be fitted if required) + Capacity: min. 90-100% (C5 capacity test protocol will be provided on delivery) + Year of manufacture: 2024 Ledpfx Asy Rnpzenujac Dimensions: Length 1,028 mm Width 1,000 mm Height 784 mm Weight: approx. 2,240 kg Suitable for the following models, among others: Linde E 100 / 600 - 1471-00 Linde E 120 / 1200 - 1471-00 Linde E 120 / 600 - 1471-00 Linde E 140 / 1200 - 1471-00 Linde E 140 / 600 - 1471-00 Linde E 150 / 1200 - 1471-00 Linde E 150 / 600 - 1471-00 Linde E 16 - 386-02 - side battery change Linde E 160 / 1200 - 1471-00 Linde E 160 / 600 - 1471-00 Linde E 180 / 600 - 1471-00 Linde E 180 / 900 - 1471-00 Linde E 35 / 600 L - 388-00 Linde E 40 - 388-00 Linde E 40 / 600 HL - 1254-01 Linde E 40 / 600 HL - 388-00 Linde E 40 / 600 L - 388-00 Linde E 40 HL - 388-00 Linde E 45 / 600 HL - 1254-01 Linde E 45 / 600 HL - 388-00 Linde E 45 / 600 HL - 388-00 - side battery change Linde E 45 / 600 L - 388-00 Linde E 45 HL - 388-00 Linde E 50 - 388-00 Linde E 50 / 600 HL - 1254-01 Linde E 50 / 600 HL - 388-00 Linde E 50 / 600 L - 388-00 Linde E 50 HL - 1254-01 Linde E 50 HL - 388-00 Linde E 50 L - 388-00 Linde E100 / 1200 - 1471-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde P 250 - 127-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 L - 127-05 Linde P 250 LWB - 5007-10 - side battery change Linde P 250 LWB - 5007-10 - vertical battery change Linde P 350 - 5007-10 - side battery change Still MX-X Still R 60-40 Still R 60-45 Still RX 60-40 Still RX 60-50 Jungheinrich EFG Jungheinrich EFG 540 Jungheinrich EFG 550 Jungheinrich EFG VAC 35 Jungheinrich EKX 515 Jungheinrich EKX 516 Toyota 7FBMF45 Crown TSP 6000-D Crown TSP 7000 Mitsubishi FB45-2 OM-Pimespo-Fiat XE 50 Steinbock-Boss WA 15 Other common battery sizes available on request. Transport available.

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: Laodpjy Dvlqjfx Anuec - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: good (used), Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive, multi-axis controller -Manufacturer: Gessmann, Joystick Multi Axis Controller -Type: 0208873 EP/160 -Quantity: 1x Joystick available Lsdpfsy Auuuex Anusac -Dimensions: 83/83/H165 mm -Weight: 0.6 kg

Condition: ready for operation (used), * Brand: Kleemann * Surface: 4500 x 1400 mm - 2 Decks Laedpfoywm Ipjx Anujc * Driving: E-motor 11 kW * Incl.: springs and springsupport.

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,150 mm, motor manufacturer: Perkins, Equipment: cabin, lighting, Side loader BAUMANN GX50/12/45 Year of manufacture: 2008 According to the meter: 16,681 operating hours 5 ton lifting capacity 3.15 m overall height 4.50 m lifting height 60 cm free lift! Perkins engine Hydrostatic drive Lodpfxsyua Txj Anusac - Fork positioner - Separate fork lift - Cabin with heating - Lighting system - Pneumatic tyres - Immediately ready for use - Including Dutch road approval Sales price: €13,500 net Affordable delivery possible!

Condition: used, Year of construction: 2020, Manufacturer : Hagmann Tec AG Laodpfex R Dfrox Anusc Model: MEDIMAT 711-45 Year : 2020 Type : Heat sealer / Sealing machine Maximum power : 8 kW Pressure : 6,0 - 8,0 bar Format : interchangeable sealing plate Sealing surface 550x350mm Sealing temperature up to 250°C Sealing force 10-70 kN Sealing time up to 9.9 seconds Documentation available

Condition: used, functionality: limited functionality, machine/vehicle number: 8714, Year of construction: 2015, operating hours: 15,000 h, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 695 mm, fuel type: electric, mast type: duplex, construction height: 3,240 mm, fork carriage width: 1,520 mm, fork length: 1,400 mm, total length: 4,800 mm, drive type: Elektro, construction width: 2,000 mm, Electric Sideloading Forklift Chassis Number: 8714 Load Center: 600 Fork Width: 200 mm Fork Thickness: 50 mm ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast Type: Duplex Condition: Ready for use and fully functional Technical Condition: Poor Front Tires Type: Pneumatic Front Tires Size: 300x15 Lajdpfsx Ek Agsx Anuec Front Tires Condition: 40 - 60% Rear Tires Type: Pneumatic Rear Tires Size: 300x15 Rear Tires Condition: 40 - 60% Battery Type: PzS Fork positioner, front work light, heater, fully enclosed cab, CE certificate, interior mirror, rotating beacon, LED, forks 200/60/1200, one additional work light on the rear of the mast, fork height positioner +/-100mm, Penny and Giles MiniLeve.

Condition: used, functionality: fully functional, machine/vehicle number: 11579, operating hours: 225 h, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 660 mm, fuel type: diesel, mast type: duplex, construction height: 3,190 mm, power: 55 kW (74.78 HP), fork carriage width: 1,320 mm, fork length: 1,200 mm, total length: 4,730 mm, drive type: Diesel, construction width: 2,000 mm, Sideloading forklift Chassis number: 11579 Load centre: 600 Fork width: 200 mm Fork thickness: 50 mm Mast type: Duplex Condition: As new Lajdpfx Ansx Ekx Usuec Technical condition: New Front tire type: Pneumatic Front tire condition: New Rear tire type: Pneumatic Rear tire condition: New Description: Demonstration unit, available immediately! Price ex works, plus freight costs. Heating, full cabin, CE certificate, interior mirror, joystick, LED lighting, cross-cylinder extension system, 4 load platforms 1800 mm, BEGE comfort seat, Baumann yellow finish

Condition: used, functionality: fully functional, machine/vehicle number: 11163, Year of construction: 2023, operating hours: 300 h, load capacity: 12,000 kg, lifting height: 4,500 mm, free lift: 1,600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, power: 129 kW (175.39 HP), fork length: 1,300 mm, empty load weight: 21,450 kg, total length: 5,790 mm, drive type: Diesel, construction width: 2,300 mm, Sideloading forklift Chassis number: 11163 Load center: 650 Fork width: 200 mm Fork thickness: 90 mm Mast type: Duplex Condition: Like new Lajdex Ekz Ajpfx Anusc Technical condition: Very good Front tyre type: Pneumatic Front tyre size: 14.00-20 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 14.00-20 Rear tyre condition: 60 - 80%

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machiningcenter Dörries Scharmann Type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC 70 pots - system 240.2 Live spindle – SK50 Ledpjgulkijfx Anueac Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993 (2/2)

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machining centre Dörries Scharmann type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC for turning 59 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm ATC for SK50 61 pots CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Laedoguk S Sopfx Anusc Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993

Condition: excellent (used), Year of construction: 2014, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Lajdjxykm Sepfx Anujc Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Condition: good (used), Year of construction: 1986, DC motor, geared motor, electric motor, DC geared motor Laedpfxeb A Ixas Anujc -Speed: 200/2000-3000 rpm -Power: 3.2 kW -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 44 -Weight: 220 kg

Condition: good (used), Grinding and separating line Seydelmann MG 160 B / SEPAmatic 1200 Ljdpfx Anovnbtijuoac Seydelmann mixer-grinder with lifter for 200 liter meat bins, type: MG160B, plate diameter: 160 mm, dimensions: 2000 mm x 1700 mm x 2200 mm. Switch cabinet, dimensions: 1230 mm x 1000 mm x 600 mm. Mobile elevating belt, s/s frame, plastic belt, belt width: 370 mm, elevating height: 1950 mm, total dimensions: 2950 mm x 850 mm x 2080 mm. Sepamatic separator, type: SEPA 1200, 400 V, 50 Hz, 12 A, 6 kW, plastic belt, belt width: 180 mm, perforations: 3 mm, total dimensions: 1500 mm x 1400 mm x 1750 mm. S/s trolley with extra drum, perforations: 5 mm, total dimensions: 850 mm x 700 mm x 1100 mm.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 9,850 h, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,150 mm, fork length: 1,200 mm, drive type: Diesel, Sideloader Mast type: Standard Condition: Ready for use and fully functional Laodpswz S Amsfx Anuoc Technical condition: good

Condition: used, functionality: fully functional, machine/vehicle number: 8818, Year of construction: 2015, operating hours: 8,359 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 600 mm, fuel type: electric, mast type: duplex, construction height: 3,240 mm, empty load weight: 12,200 kg, total length: 4,780 mm, drive type: Elektro, construction width: 2,200 mm, Electric sideloader Chassis number: 8818 Load centre: 700 Mast type: Duplex Condition: Refurbished with warranty Technical condition: good Front tyres type: Pneumatic Front tyres size: 300x15 Front tyres condition: 40 - 60% Rear tyres type: Pneumatic Rear tyres size: 300x15 Rear tyres condition: 40 - 60% Ljdpex Eky Ssfx Anujac Battery voltage: 120V Battery type: PzS Rear working lights, front working lights, heater, full cab, CE certificate, joystick, Air-suspended driver's seat, working lights on mast and cab.

Condition: used, functionality: fully functional, machine/vehicle number: 9777, Year of construction: 2019, operating hours: 1,752 h, load capacity: 7,000 kg, lifting height: 4,500 mm, free lift: 695 mm, fuel type: diesel, mast type: duplex, construction height: 3,240 mm, power: 70 kW (95.17 HP), fork carriage width: 1,520 mm, fork length: 1,400 mm, empty load weight: 12,550 kg, total length: 4,950 mm, drive type: Diesel, construction width: 2,200 mm, Sideload forklift Chassis number: 9777 Load center: 700 Fork width: 200 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Duplex Condition: Refurbished with warranty Technical condition: good Front tire type: Pneumatic Front tire size: 355/65-15 Front tire condition: New Laodpfx Aex Ekzpenuoc Rear tire type: Pneumatic Rear tire size: 355/65-15 Rear tire condition: New Fork positioner Hydraulic tilting carriage Heater, full cab, CE certificate, joystick 2 working lights on mast, 4 load posts H 1,800 mm, platform in plywood (anti-slip coated panels)

Condition: used, functionality: fully functional, machine/vehicle number: 9396, Year of construction: 2017, operating hours: 11,576 h, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 695 mm, fuel type: diesel, mast type: duplex, construction height: 3,240 mm, power: 70 kW (95.17 HP), fork carriage width: 1,520 mm, fork length: 1,200 mm, empty load weight: 10,210 kg, total length: 4,730 mm, drive type: Diesel, construction width: 2,000 mm, Sideloading forklift Chassis number: 9396 Load center: 600 Fork width: 200 mm Fork thickness: 50 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Duplex Condition: Refurbished with warranty Technical condition: Good Front tire type: Pneumatic Lasdpfx Anox Ek Amouoc Front tire size: 300x15 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 300x15 Rear tire condition: 40 - 60% Rear work light, front work light, heater, full cab, CE certificate, joystick, radio CD,

Condition: used, functionality: fully functional, Year of construction: 1997, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: gas, mast type: duplex, drive type: Treibgas, Sideloader Lajdpfxou Acywe Anuoc Mast type: Duplex Technical condition: good Fork positioner,

Condition: used, functionality: fully functional, machine/vehicle number: 8892, Year of construction: 2015, operating hours: 6,480 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,100 mm, fork length: 1,200 mm, empty load weight: 8,260 kg, total length: 4,400 mm, drive type: Diesel, construction width: 1,950 mm, Sideload forklift Chassis number: 8892 Load center: 600 Fork width: 200 mm Fork thickness: 50 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Duplex Speed class: 20 Condition: Refurbished with warranty Technical condition: good Front tire type: Pneumatic Front tire size: 250-15 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 250-15 Laedpex Ekyrofx Anusc Rear tire condition: 40 - 60% Heating, full cabin,

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 8,894 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,080 mm, fork length: 1,300 mm, drive type: Diesel, Sideloader Lsdpfx Aou Aczbsnuoac Mast type: Standard Technical condition: good