Used Lignuma Foam Cutting Machine for sale (66,646)

Condition: ready for operation (used), Year of construction: 2013, sheet thickness steel (max.): 25 mm, power: 6 kW (8.16 HP), Working area 3000x1500. Loadmaster system included.Due to not using machine for longer time,the service is required. Fjdjwh R R Nspfx Akyjpn

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes. Fpjdpfx Ajzg D I Aekyjn

Condition: ready for operation (used), Year of construction: 2015, operating hours: 4,700 h, functionality: fully functional, machine/vehicle number: 241.371, saw blade diameter: 350 mm, total length: 7,300 mm, total width: 7,600 mm, cutting width (max.): 5,800 mm, power: 15 kW (20.39 HP), cutting height (max.): 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 46 A, plate length: 7,300 mm, platform width: 5,800 mm, saw blade bore: 30 mm, table height: 970 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, scorer, Electrical connected load: approx. 25 kW Voltage and frequency: 400 V / 50 Hz Mains system: TN with earthed neutral point Operating pressure: 6 bar overpressure Compressed air volume at operating pressure: approx. 143 l/min Compressed air volume at standard pressure (1 bar): approx. 1000 l/min Extraction connection - pressure beam - longitudinal saw: 2 x Ø 120 mm Extraction connection - chip channel - longitudinal saw: 1 x Ø 100 mm Extraction connection - angle stop - longitudinal saw: 1 x Ø 80 mm Required extraction velocity: 25 m/s Extraction capacity: 3190 m³/h Required negative pressure at extraction ports: 2500 Pascal Nominal cutting length for saw machine 580: 5800 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Saw blade projection above table (U): max. 95 mm Maximum clamp opening (K): 90 mm Fodpfx Ajytfxwjkyepn Maximum stack height (P): (including total wave heights and all max. panel thickness tolerances) 80 mm Minimum panel thickness or stack height (P): (with use of a strip aligner) 6 mm Minimum alignment force of strip aligner: 400 N / unit Maximum alignment force of strip aligner: 2000 N / unit Working height, longitudinal saw: 970 mm Overall height: 2070 mm Main saw motor power: 15 kW Saw unit feed speed, forward: 5 to 120 m/min Saw unit feed speed, return: 120 m/min Return feed speed – longitudinal saw: up to 80 m/min

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: 3000w, type of cooling: water, compressed air connection: 1 bar, Equipment: cooling unit, dust extraction, Raycus fiber laser cutting machine for sale with a brand new, warrantied laser source, new lens, and new water chiller. The machine also includes an exhaust system and a voltage stabilizer. It can be tested in Hungary, or we can provide an online demonstration. Fpjdpfx Akoy I Sd Doyon

Year of construction: 2014, operating hours: 4,000 h, condition: used, functionality: fully functional, machine/vehicle number: P260224159, Selling a complete, high-pressure waterjet cutting system, 6200 bar, manufactured by LDSA, a leading French manufacturer. The machine is in exceptional condition and has seen very little use (occasional use in a workshop). The configuration includes an ultra-high-pressure KMT Streamline Pro 60 pump (6200 bar), enabling higher cutting speeds and significant abrasive savings. Technical Specifications: Operating hours: 4000 hours (actual and verifiable) Usable format: 4,000 mm x 2,000 mm Pump: KMT Streamline PRO 60 (Power: 60 HP / Max. pressure: 6,200 bar) Overall condition: Very good, regularly maintained. Equipment and Options Included: Sludge management: Automatic extraction system SEBA (increased productivity and easy cleaning). Cooling: Oil cooler (chiller) included for optimal pump operation. Software: LANTEK CAD/CAM suite (license included). Accessories: High-pressure cutting head, CNC control panel. Key Advantages: Fsdpfx Aezvx Ntjkyepn Maintenance: Standard KMT and LDSA components, responsive after-sales service in France. Versatility: Ideal for steel, stainless steel, aluminum, plastic, glass or granite. Availability: The machine can be viewed under power for pressure and movement tests. Logistics: The machine is sold as is, ex-works. Dismantling, lifting, and transportation are the responsibility of the buyer (possibility of arranging contact with the manufacturer for a certified dismantling/reassembly service). Location: LUNEL, France

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Fpodpfez Ixzksx Akyen

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 43,209 h, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser hours: 26,141 h, laser power: 2,500 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of cooling: water, Equipment: cooling unit, documentation/manual, emergency stop, safety light barrier, We are offering this used LVD SIRIUS 3015 Plus laser cutting machine, manufactured in 2015. Manufacturer: LVD Model: SIRIUS 3015 Plus Year of manufacture: 2015 Condition: Used Category ID: 1041 Type ID: 1180 Machine type: Laser cutting machine LVD Sirius 2.5 kW CO₂ laser cutting system with exchange table – large format 3,000 × 1,500 mm – fully functional For sale is an LVD Sirius laser cutting system with a CO₂ laser power of 2.5 kW (2500 W). The machine is fully functional and can be inspected on-site and tested in operation after prior arrangement. Technical data / Equipment * Manufacturer: LVD * Model: Sirius * Laser power: 2.5 kW / 2500 W * Laser type: CO₂ laser * Table format / working area: approx. 3,000 × 1,500 mm * Large format laser cutting system * Exchange table with 2 tables * Suitable for industrial metal processing * Used, fully functional Inspection and functional test An on-site inspection and functional test is explicitly possible. The machine can be inspected and tested in operation after scheduling an appointment. Dismantling and collection The machine will be ready for dismantling from December 15th. Fpodpfsz Iha Ajx Akyjn The complete dismantling, transport and loading will be carried out by the buyer at their own cost and responsibility. The buyer is responsible for the necessary organization, personnel and suitable equipment and tools for dismantling and loading. If you are interested or have any questions about the machine, please do not hesitate to contact us. An on-site inspection is possible after prior arrangement.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm Fsdpfx Ajxwl N Ajkyjpn - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm Fjdpfsuc Sifox Akyjpn The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7661306, cutting width (max.): 780 mm, insertion depth: 780 mm, insertion height: 120 mm, overall weight: 1,400 kg, type of input current: three-phase, total width: 2,500 mm, input current: 6 A, total height: 1,600 mm, total length: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, Equipment: safety light barrier, POLAR MOHR 78 X – Paper Cutting Guillotine (2006) Technical Specifications: - Cutting speed: up to 45 cuts/min - Clamping pressure: 150–3,000 daN - Control: Programmable electronic system Fedpfsz Ndtuox Akyspn - Display: 15-inch LCD Condition: Fully operational and regularly used in production until October 7, 2026. Reason for sale: Upgraded to a newer, more efficient machine. Location: Riga, Latvia. Price: €8000 + VAT Available for inspection and testing by appointment.

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided Fjdpfoy Urzijx Akyopn – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, SCM GABBIANI P80 – Automatic CNC Beam Saw Brand / Model: SCM Gabbiani P80 Year of manufacture: 2022 Location: Croatia Condition: Excellent working condition, currently in production Technical specifications: * Panel dimensions: 3300 × 3200 mm * Main saw motor: 11 kW (15 HP), blade Ø 340 mm * Scoring unit: 1.3 kW, blade Ø 200 mm * Maximum cutting height: 80 mm * Saw carriage speed: 6–60 m/min * Pusher speed: up to 60 m/min * Installed power: 12–15 kW * Compressed air consumption: 300 NL/min Fjdpfx Akjwtgdieyjpn * Dust extraction: 4 × Ø120 mm connections, total 2,190 m³/h Equipment: * Maestro Active Cut control system (PC/PLC) * eye-M operator console * Maestro Ottimo Cut optimization software * Label printer * Teleservice module The machine is in excellent condition and can be inspected under power. Available due to production reorganization and installation of a new automated SCM Flexstore system. Additional photos, videos and technical information available upon request.

Condition: good (used), functionality: fully functional, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser power: 6,000 W, sheet thickness (max.): 20 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, 6 kW Bodor Laser Cutter. Fpjdez Niv Aspfx Akysn 2 Years old with low usage (less than 4 hours per week). Comes complete with mezzanine floor to raise chillers, air compressors and extractors out of the way. Cuts up to 20mm thick hardox on Oxygen. Cuts up to 6mm mild steel on Compressed Air. Automatic door and work bed. Manual part trays underneath.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm Fjdpfxexwlmus Akyopn - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers Fjdpfx Ajzt Nbzjkyjpn - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Fodjz N Sfaspfx Akyspn Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: used, Year of construction: 1998, functionality: fully functional, Machine Type: Automatic hot foil stamping and die-cutting machine Fsdpfexg Hzfox Akyspn Year: 1998 Manufacturer: Yawa Maximum Sheet Size: 780 mm x 540 mm Maximum Die-Cutting Pressure: 120 tons (or 144 Tn) Processing Speed: Up to 5,500 sheets per hour Hot Foil Stamping Features: 6-zone heating system Can process both longitudinal and transverse foils Material Thickness: From 90 to 600 gsm Other Features: Front and side lays Non-stop feeder and delivery options Includes chases for both die-cutting and stamping

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. Fpodpjwwzudofx Akysn The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel Fpodpfsz N Sf Tsx Akyen – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: good (used), Paper guillotine EBA 5260 The machine is 100% functional, after inspection in very good condition. This is the currently produced, newest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 520mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen Fpedpfx Akez N Sgwoyjn electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: used, Year of construction: 2024, functionality: fully functional, This is a cutting machine manufactured by Scharfen, model ES 300, year of manufacture 2024. The machine has been inspected in our in-house workshop and is fully functional. This machine was an incorrect purchase; it turned out that a miter cutting machine was required. Therefore, it was only used for a short period. You will receive an invoice with VAT shown. The list price of the machine is €4,082 net / €4,857.58 gross. Our offer price is €2,932.77 net / €3,490 gross. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Inspected & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 580 x 635 x 420 mm Blade: 300 mm diameter, hollow ground, hard chrome-plated stainless steel, long cutting life. Cutting thickness setting: 0-25 mm (infinitely adjustable) Cutting length: 250 mm Cutting height: 210 mm Noise level: less than 70 dB (A) Grinding device removable Voltage: 400 V three-phase or 230 V single-phase Power: 0.6 kW Weight: approx. 51 kg Serial number: 2241096 Year of manufacture: 2024 Condition: used, inspected, fully functional Additional information: Fpjdpfx Aksz Ilm Tjyen Large storage area for sheets Quick and easy to clean Extremely robust and low maintenance 100% stainless steel Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, compressed air connection: 8 bar, table width: 2,000 mm, cutting current: 260 A, positioning accuracy: 0.01 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, double-sided, For sale: used AJAN CNC plasma cutting machine with water table. The table is filled with water to a set level and cutting takes place just above the water surface. The water captures fumes and dust and cools the workpiece, so no separate filtration system is needed. The machine is compact and takes up little floor space. The gantry has dual-side servo drive. AJANCAM nesting software is included free of charge. ⭐️ Manufacturer AJAN Elektronik (Turkey) ⭐️ 1st Commissioned December 2015 ⭐️ Table size 2000 × 6000 mm ⭐️ Plasma power source AJAN HP 260A ⭐️ CNC control AJAN own controller ⭐️ Nesting software AJANCAM nesting software – included free of charge + free updates in future. ⭐️ Cutting currents 30 A, 80 A, 130 A, 260 A ⭐️ Max. cutting thickness quality cut up to 30 mm ⭐️ Input voltage: 380 V ⭐️ Phases: 3 ⭐️ Frequency: 50 Hz ⭐️ Torch height control automatic Fedpfx Aey Annbjkyepn ⭐️ Gas control automatic ⭐️ Condition in working order ⭐️ Price 16 500 EUR + VAT ⭐️ Transport and installation 5 500 EUR + VAT (in Baltics, Finland) ⭐️ Availability immediately ⭐️ Photos, layout, attached to this post ⭐️ video on request Need more information or a formal quote? please send a e-mail or give us a call.

Condition: excellent (used), Year of construction: 2017, operating hours: 6,100 h, Used Lectra Vector VT-FA-iQ50-71 automatic cutting machine, year 2017, effective cutting width: 180 cm, maximum thickness: 5 cm, operating hours: 6100, with traversing table. The machine does not have a software license, so it is necessary to contact Lectra to obtain a new software license and training. The machine is in excellent condition. Fedpfez D Nkbex Akyjpn

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Fpsdpezw Tzajfx Akyon Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: like new (used), Year of construction: 2023, operating hours: 127 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 400 kg, sheet thickness aluminum (max.): 200 mm, table length: 4,000 mm, table width: 2,000 mm, total height: 4,100 mm, total length: 5,800 mm, total width: 2,100 mm, overall weight: 2,100 kg, product height (max.): 200 mm, Equipment: safety light barrier, 3-axis waterjet cutting machine, CMS Smartline 2040 model, manufactured in 2023. It has a travel range of 4,000 mm on the X-axis, 2,000 mm on the Y-axis, and a maximum cutting thickness of up to 220 mm. The machine features a robust work table with dimensions of approximately 4,150 × 2,080 mm and is equipped with a high-pressure pump. If you are looking for cutting performance to high standards, we recommend our offer for the CMS Smartline 2040. Contact us for more details. • Maximum work table size: approx. 4,150 × 2,080 mm • Cutting system • Technology: abrasive waterjet • Cutting head: 3-axis waterjet cutting head (CMS Tecnoucut) • Maximum cutting thickness: up to 220 mm (depending on the material) • CNC interpolated cutting for complex shapes • Automatic height adjustment on the Z-axis • Axes and movement • CNC-controlled axes: X, Y, Z • Motors: brushless • Guides: linear guides with ball recirculation • Drive system: rack and pinion (X/Y), ball screw (Z) • Positioning accuracy: ±0.05 mm • Repeatability accuracy: ±0.03 mm • Waterjet pressure system • Maximum operating pressure: approx. 4,150 bar (60,000 psi) • Pump power: approx. 22.5 kW • Note: 30 HP high-pressure pump included; see additional options • Control and software • CNC: OSAI Open • HMI interface: CMS Active • CAD/CAM: compatible with EasyCut / EasyPump Fsdpfez I Sagox Akyepn • Control panel with touchscreen on a mobile stand • Work table and loading • Support surface: steel grid table • Max. load on table: approx. 400 kg/m² • Electricity and connections • Power supply: 400 V / 50 Hz / 3 phases • Installed power: approx. 35–40 kVA (depending on configuration) • Protection rating: IP54 (electrical cabinet) Csblf Hjzh Itxjhm Derh • Safety and equipment • Safety systems and optical barriers • Automatic lubrication system (X, Y, Z) • Collision detection system for the cutting head • Laser pointer for setting the zero point • Electrical cabinet and control panel Additional equipment • High-pressure pump (30 HP) • Abrasive feeding system (capacity 270 kg)