Used Lenze Erbs047R400W for sale (222)

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor, geared motor with brake -Manufacturer: Lenze, bevel gear motor -Transmission: Type G50BH121MVAR2C00 -Speed: 106.0 rpm / Torque: 65 Nm -Engine: Type M55AP080M045E00CTZ Hedpfxext Dnie Aitonu -Power: 0.75 kW / 50 Hz -Shaft: Ø 25 x 45 mm -Protection rating: IP55 -Number: 4x geared motors available -Price: per piece -Dimensions: 490/160/H230 mm -Weight: 20.5 kg/pc.

Condition: good (used), Mains filter for frequency converters, PLC control, mains filter, mains filter Hnedsxm S Anjpfx Aitju -Manufacturer: Lenze: Mains filter -Type: E94AZMP0824 .: 13430982 -Dimensions: 490/270/H275 mm -Weight: 29.3 kg

Condition: used, Lenze gearmotor GKR06-2M VBR 112C32 i=3,431 M2=119Nm n2=421.1/min. 50Hz Included: brake: BFK458-14N 24V DC 50W 60Nm feedback: resolver TS2651N141 Hnodpfx Aiepahxhsteu Used, working, 4 pieces available. The price quoted is for 1 piece.

Condition: good (used), Year of construction: 2012, Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Lenze, brake resistor made from CNC machining center Santenberg GTC S 2 -Type: ERBD018R03KO -Resistance: R=18 ohms; P=3000W -Number: 2 resistors available Hnedpfei Sdf Aox Aitou -Price: per piece -Dimensions: 740/180/H240 mm -Weight: 10.8 kg

Condition: used, functionality: fully functional, Lenze E94AZMS0094 Mains Filter Single Drive. Ir: 9A U: 3x 500Vac Hodetvz Htjpfx Aitenu f: 50-60 HZ L: 3.5 mH 2 Mains filter for sale. 1 piece/425 EUR Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Lenze 9224_E.2B.20 / 345491 frequency inverter series 9220 SN: 2/7142/2367, used, in good condition, 100% fully functional, delivery as per photos. Hnsdpfxjy Nrx Rj Aiteu

Condition: good (used), Gearbox, spur gear, worm gear -Gearbox: Flat gearbox, unfortunately without type designation -Part No.: R 8 395-2 -Translation: 2-stage 1:8 / 1:2 counter-rotating -Shaft: Ø 45 x 55 mm / Ø 20 x 22 and 25 x 75 mm -Dimensions: 550/270/300 mm Hsdpfx Aot Trwreitenu -Weight: 40 kg

Condition: good (used), Year of construction: 2012, Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module from CNC machining center Santenberg GTC S 2 -Type: EMB9352-E -Input: DC 725V Imax = 25A -Output: Pav= 19 kW Ppk = 32 kW Hedpfxei Sdgye Aitsnu -Quantity: 1x brake module available -Dimensions: 55/380/H185 mm -Weight: 2.3 kg

Condition: used, Drive motor, DC servo motor LENZE type GFQBT 80-24 Spindle motor, electric motor, main spindle motor Serial no. 184592 Year of construction: 1993 Hnodpfxetpkx Ns Aiteu Rated power: 4.2 kW Operating voltage: 260 V DC Rated current: 20 amps Maximum speed: 3000 rpm Excitation voltage: 200 V DC Excitation current: 1.15 amps - Electric brake Shaft diameter: 24 mm (shaft with 8 mm feather key) Shaft length: approx. 47 mm (shaft protrusion from centering edge) Centering flange diameter: 110 mm Bolt circle diameter: 130 mm, 8 x M8 thread - Encoder, speedometer, GBR 190V Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Output current: 67 mA (max. 200 mA) Speed max. 9000 rpm External fan LENZE (EBM) type G2E 120 Mains connection: 230 V, 50 Hz, 0.32 A, 0.075 kW Overall length: 630 mm (without shaft and centering flange) Overall dimensions L x W x H: 690 x 340 x 430 mm Weight: 45 kg good condition

Condition: ready for operation (used), Year of construction: 1998, Gear motor Loher/Lenze, shaft diameter 55 mm, with brake. Hodpfx Asxr N Nveitenu

Condition: good (used), hydrodynamic fluid coupling, centrifugal coupling, rubber disc coupling, claw coupling, connecting coupling -Manufacturer: Lenze -Type: KD 3922656 Size S 08 -Outer diameter: 470 mm Hjdjyzfucepfx Aitsnu -Shaft mount: Ø 65 mm -V-belt pulley: 7-groove SPB 230-7 (17 mm) -Dimensions: Ø 470 x 350 mm -Weight: 76 kg

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting Hnjdez Rvi Espfx Aitsu - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Condition: good (used), Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Lenze HEW, adjustable geared motor -Adjustment gear: Lenze type 11.432.13.10.2 1/88 36-7 rpm -Transmission: Lenze type 12.602.10.1.1 -Motor: TM80-4S 0.55 kW Hjdpfez Dunfox Aitjnu -Shaft: Ø 25 x 50 mm -Design: B3 -Protection class: IP 54 -Dimensions: 460/380/H190 mm -Weight: 25.7 kg

Condition: new, Year of construction: 1993, New control unit or relay/transformer unit. Hnjdpfx Aiey Ugtmotou

Condition: good (used), Height gauge, parallel gauge, height measuring device, height measuring and marking device, height marker -Manufacturer: KS Lenze, height gauge type C500-23 -Max. working height: 520 mm -Number: 2x height gauges available Hnjdjyik H Ajpfx Aitsu -Price: per piece -Dimensions: 240/175/H575 mm -Weight: 7 kg/pc.

Condition: used, Year of construction: 1981, Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Lenze, gearbox type 12.602.12.1.4 i 31.5 -Shaft: Ø 60 x 120 mm -Dimensions: 650/355/H395mm Hsdpfxjt Apn Te Aitsnu -Weight: 113 kg

Condition: ready for operation (used), Lenze 9223_E.2B.20 / 345490 frequency inverter series 9220 SN: 2/7142/2495, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hnedpfxoy Nrx Do Aitou

Condition: used, The machine is designed to straightening and cut metal from a roll. Fully functional, straightening machine engine replaced a few years ago, Lenze. New software Lenze has been installed. The machine is programmable. Adjustable width, cutting length, sliding table. There is a remote control. There is an additional blade for the guillotine. Working width: 1500 mm Thickness: up to 2 mm Hnsdpfom E U Hiex Aitou If you have more questions, we will be happy to answer them.

Condition: ready for operation (used), Lenze 630 / 633 E 3 frequency inverter SN:326444, used, minor signs of use, 100% fully functional, delivery as per photos. Hnodpfxsx Dw Iks Aitsu

Condition: ready for operation (used), Lenze 633 E 3 . 326444 frequency inverter, serial number: 44, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hsdsx Et D Hepfx Aitjnu

Condition: ready for operation (used), Lenze DFVARS 080-22 servomotor SN: 0237186 with A2S 107-AA01-31 fan, used, in good preserved condition, 100% functional, delivery as per photos Hnedpfjy Npgrjx Aiteu

Condition: ready for operation (used), Lenze DFVARS 071-22 servomotor SN: without fan, used, in good condition, 100% fully functional, delivery as shown in the photos. Hsdpfx Aiey Npglstonu

Condition: ready for operation (used), Lenze DFVARS 071-22 servomotor SN: 0237500 with A2S 107-AA01-31 fan, used, in good condition, fully functional, scope of delivery as per photos. Hjdoy Npgfspfx Aitenu

Condition: used, Year of construction: 1996, functionality: unexamined, Used hydraulic unit from a Windsor injection molding machine, consisting of: Hnsdpfx Aiez D S Enotju - Electric motor Schorch KA7315M-BB03F-Z, manufactured in 1996, with 132 kW - Hydraulic pump Sauer, type 88P 226-197 LF - Reservoir tank with oil cooler, filters, and hydraulic block - Corresponding Lenze inverter in a suitable control cabinet Please refer to the attached images for further details. Collection in 42781 Haan, loading with a crane is possible.

Condition: used, functionality: unexamined, Ferwood Code: RU0010645 - Manufacturer Code: MDSKARS056-22 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Hsdpfxev Iz S Se Aitonu