Used Kodak Large-Format Thermal Plate Setter for sale (18,855)

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) Bsdpfxsvpalas Aa Djdb ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Year of construction: 2007, condition: good (used), machine/vehicle number: 10369, Thermal CTP PT-R4300 E: Computer to Plate Recording System: External Drum 2 x SA-L4100 Single Autoloader: Fully Automatic loading of 50 Plates & automatic interleaf removal PST 26 Plate Stacker Bacher Punch 425 for PT-R4000 ADARA TH 85: Cleaning and Gumming unit for chemistry-free thermal CTP Plates Technical Details: Throughput option (plates/h in max. format) : 10 Plates / Hour Light Source: 16-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Bsdofh Dm Nopfx Aa Djdb Plate Thickness : 0,15 - 0,3 mm Resolution : 2,400 - 2,438 - 2,540 dpi Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Year of construction: 2005, condition: good (used), machine/vehicle number: 756, Thermal CTP PT-R4300 (Computer to Plate) Recording System: External Drum Bdedsfh Dmzopfx Aa Djb PST 26 Plate Stacker Glunz & Jensen Interplater MP 85: Thermal Plate Processor Technical Details: Throughput option (plates/h in max. format) : 20 Plates / Hour Light Source: 32-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right Bdedpjxmfc Uefx Aa Dob - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: used, Year of construction: 2016, Used Machine Year of manufacture: 2016 Equipment and technical data: - Electrical system 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle, 12 kW (S6), HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with stepless, height-adjustable extraction hood – motor-driven control - Full rated power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotation direction: clockwise/counterclockwise - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Max. saw blade Ø 350 mm - Spindle cooling: liquid cooling - Extraction hood, stepless adjustment Profit H350 16.30: CNC machining center in gantry design (without tooling) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electrowelded box sections. The internal steel ribbing provides high rigidity. Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (details available in the layout). - Double-sided driven gantry X-Axis guidance system: The drive for the X-axis gantry is via a rack and pinion with angled, crowned teeth – guaranteeing maximum precision. The reduction gearbox ensures top machining quality and repeatability. Bearing via encapsulated recirculating ball carriages running on hardened and ground linear guides. Bodpey Ih Rgjfx Aa Dsdb Y-Axis guidance system: Bearing via encapsulated recirculating ball carriages running on hardened and ground linear guides. The Y-axis is positioned via a ground recirculating ball screw. Z-Axis guidance system: Bearing via encapsulated recirculating ball carriages running on hardened and ground linear guides. The Z-axis is positioned via a ground recirculating ball screw. Automatic central lubrication: Grease is automatically delivered to the guide carriages of X, Y, and Z axes as well as the ball screws of Y and Z axes. The lubrication cycle is executed automatically after a preset interval. 12-position linear tool changer on the left side of the machine frame including a pickup station for aggregates: The 12-position linear tool changer ensures minimal setup times and offers ample space for milling tools. One aggregate change station (see layout for configuration options). Max. tool diameter 250 mm. Max. tool length 240 mm. Drilling head DH 18 6H 1S: Vertically: 12 spindles (7 spindles in X-direction and 5 spindles in Y-direction). Horizontally: 6 spindles (4 spindles in X-direction and 2 spindles in Y-direction). Stroke = 70 mm, max. drill length = 70 mm, shank diameter = 10 mm. All spindles are individually driven and selected. 1 grooving saw in X-direction, max. saw blade diameter 120 mm.

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Bedpfx Aexy Tlwoa Dsdb

Condition: used, Year of construction: 2007, Format: 155 cm Equipment: Material separator: Manufacturer: Kodak Bedpfjyxqxzox Aa Dsdb Year: 2009

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Bedpfx Aaou R S Nwo Dedb Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: excellent (used), Used cryothermal liquid nitrogen tank with a capacity of 47 liters and all 11 specimen canisters. This liquid nitrogen tank is ideal for deep-freeze storage of biological samples and chemicals. Delivery within the EU is possible. Bdjdpey H Hiljfx Aa Dsb

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 5640/5, overall weight: 70 kg, plate length: 400 mm, plate width: 400 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item in a timely manner between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Bsdpsy D Nm Iofx Aa Dodb Plate dimensions: 400 x 400 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 400 x 400 x 400 mm Weight: 70 kg External reference: 26

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS Bdjdox Hllxopfx Aa Dob - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm Bdsdpey Aubuofx Aa Deb hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Bdodjxnm Rcopfx Aa Dob Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Contact us for more details or to arrange a viewing. Bdjdpfx Aoy Dg N Tsa Djb

Year of construction: 2022, condition: new, UV lamp 405nm -USHIDO or Mercury -For all BasysPrint systems with UV lamps, -We have all spare parts for BasysPrint -451,741,745,850, 860 in stock Bedod I Twqopfx Aa Djdb

Year of construction: 2014, condition: not inspected (used), Distribuition Board CTP_PWR2_400 Magnus Interlook Board Drum Driver Module Bdsdpfx Ajhcz Hxja Dsb Output Rollers

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A Bedpfx Aaj Sdrfo Dodb space needed: 820 x 1220 x 930 mm weight: 750 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Model / description: “MAGNUS 400 FIBER, SHIPPABLE KMAT” (Creo label) Serial: M41243 Manufactured: June 2008 Bodpfxjyxl N Io Aa Dsdb Power (platesetter): 200/210/220/230/240V, 16A, 50 Hz (on the label) Laser safety: marked Class 1 laser product (normal for enclosed CTP systems) Max plate size: about 685 × 762 mm (around drum × along drum) Min plate size: about 300 × 228 mm Resolution: up to 3048 dpi Throughput: often listed around ~16 plates/hour (depends heavily on plate type + sensitivity and configuration) Machine size / weight: roughly 135 × 176 × 145 cm, ~750 kg The Magnus 400 Fiber system with Shippable KMAT configuration is a professional industrial imaging solution designed for high-precision production environments. This type of equipment is commonly used in the printing and graphic industry for processing and imaging printing plates with high accuracy and consistent performance. The system is built for reliable operation in industrial facilities where stable production processes and dependable equipment are essential. Machines of this type are widely used by printing houses, packaging manufacturers and companies involved in graphic production workflows. The system includes industrial electronic components such as the Hu.q CSG-86 module, manufactured in July 2006, operating at 200–240 V AC, 50/60 Hz with CE and UL certification. These components are designed for long-term operation in demanding industrial environments and ensure stable system performance. The Magnus 400 Fiber CTP system is suitable for companies that require dependable equipment for plate imaging and preparation within professional printing and industrial production environments. The machine can be inspected on site and prepared for shipment. Loading and international transport can be arranged depending on the buyer’s,

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 351.09.006.18, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea individuală a bunurilor identificate în prezentul anunț Prima licitație va avea loc la data de 08.04.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 15.04.2026, 22.04.2026, 29.04.2026, 06.05.2026, 13.05.2026, în aceleași condiții și la aceeași oră. În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 06.04.2026 între orele 09:00-12:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar la nr. de telefon 0763 478 619 și să își exprime intenția de participare, anterior datei stabilite. Pe parcursul organizării ședințelor de licitație publică, lichidatorul judiciar va mai organiza zile de vizionare, care vor fi aduse la cunoștință persoanelor interesate. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Pasul de licitație este de 5% din prețul de pornire. Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA pentru bunurile de până la 5.000 euro și de 1.000 lei+TVA. pentru bunurile de peste 5.000 euro. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Bsdpjyfg E Njfx Aa Djdb Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza.

Condition: used, Bed plate 10ft x 5 ft x 4000kgs (approx) - Matched Pair Bdedoywziuopfx Aa Djb

Condition: not inspected (used), functionality: unexamined, plate length: 800 mm, plate width: 800 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period from 04.05.26 to 07.05.26. TECHNICAL DETAILS Plate dimensions: 800 mm x 800 mm MACHINE DETAILS Dimensions & Weight Bedpfx Asyr Nutsa Djdb Dimensions (L x W x H): 800 x 800 x 700 mm Weight: 250 kg EQUIPMENT Measuring instruments Electrode holder External reference: 63

Condition: not inspected (used), functionality: unexamined, table length: 1,200 mm, table thickness: 120 mm, table width: 800 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the period from 04.05.26 to 07.05.26. TECHNICAL DETAILS Bsdpfx Aoyr Hlvsa Dodb Plate dimensions (L x W x H): 1,200 mm x 800 mm x 120 mm Accuracy grade: Grade 0 Flatness: 5.6 µ MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,200 x 800 x 1,500 mm Weight: 550 kg EQUIPMENT Digital height gauge (manufacturer: MITUTOYO) Various measuring prisms Integrated workshop drawer cabinet with assorted measuring tools External reference: Lot 5

Condition: used, Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, We offer this used FORMAT-4 PROFIT H200R 13.33 throughfeed machining centre, year of manufacture 2022. Type: PROFIT H200R 13.33 Serial number: 30B.05.067.22 Code: 9417 Rated voltage: 400.0 V Number of phases: 3P+N Frequency: 50/60 Hz Rated current: 40.0 A Power: 18.0 kW Year of manufacture: 2022 Control voltage: 24 VDC Bodpeyvtq Uefx Aa Dedb Minimum protection fuse: 32 A Maximum protection fuse: 50 A Minimum compressed air supply: 8 bar Air consumption: 350 Nl/min If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, machine/vehicle number: 075912, Offer 26062 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling diameter in steel ST 60: 45 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 200 mm - Throat: 385 mm - Table with 2 T-slots, height adjustable by hand crank - Table size: 550 x 480 mm - Min. / max. distance table / drill spindle: 120 / 650 mm - Column diameter: 200 mm - Electromagnetic feed: 0.1 - 0.2 - 0.3 - 0.4 mm/rev - With overload protection - Infinitely variable spindle speeds in 3 ranges: 60 – 1900 rpm - Drive: 400 V / 3 kW - Space requirement approx. W 700 x H 2120 x D 1100 mm - Weight approx. 700 kg - Includes: thread cutting device, coolant system, digital speed display Bdjdpfx Aoyvhunja Dsb

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Bdodpfxorrh T Ae Aa Dsb Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location