Used Khs Khs Innopal As1N Glass Depalletizer (2005) for sale (4,809)

Condition: used, loading : 75 to 80 % with 2 arms Bodpfx Aozxqpkelbowt all stainless steel mobile 0,81 kW tiltable drum with working and waiting time dimensions (l x w x h) : ± 1.300 x 1.100 x 2.100 mm

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Bwsdpfxjytvyfs Albst Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm Bsdpsu Nhiqsfx Albjwt - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Glass GbmH mixer marinator for delicate food products, with manual tilting and multi-functional control display. Fitted on mobile frame. Suitable for semi-solid, powdery and liquid products. Model / Type - VSM 150. Bedpfx Alevuhiqjbewt Serial number - 4174 Date of manufacture - 2019. Capacity - 150 litres. Electric supply - 400 V / 50 hz / 3 phase. Power - 16 Amps.

Condition: used, Year of construction: 2005, Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  - Capacity: Up to 60,000 bottles per hour - Formats: Supports 11 bottle formats - From 0,3l - 0,66l - Steini, NRW, Longneck - Container types: Glass, not transparent, non-contoured - Container diameter: 60.4 – 69.1 mm - Container height: 174 – 270 mm - Label positions: Bsdpfx Alswd Uk Sobswt - Front (up to 2 labels) - Back (up to 1 label) - Label size range: - Width: 70 – 111 mm - Height: 33 – 100 mm - Band height: 1100 mm - Max. ambient temperature: 40°C - Power connection: 400 V - Machine design: Straight version, size L (approx. 3360 mm wide) - Bottle carousel diameter: 1610 mm - Number of bottle plates: 42 - Bottle rotation in carousel: Mechanical - Guide star diameter: 690 mm - Labelling stations: - 2 x Cold glue labelling stations - 8 glue pallets - 9 gripper positions - Automatic magazine feeding Scope of Delivery  - 1 x Labelling Machine | HEUFT | TORNADO | 2005 - Including: - 2 x Integrated Laser Coders | Bluhm - Complete labelling setup with format parts for 11 bottle formats - Cold glue stations, glue pallets, gripper arms, and automatic magazine - Technical documentation

Condition: used, KHS triblock filling line 45-80-10 - KHS bottle rinser, Innoclean FR-EM 45 - KHS volumetric filler, Innofill EV-VF 80 with ENDRESS+HAUSER DOSIMAG A flowmeters - ALCOA KUPI 10/540 capper (max. 25,000 bph) Output: approx. 20,000 bph Control system: S-7 Year of manufacture: 1998 Bedjychaijpfx Albjwt Complete machine documentation – several folders.

Condition: used, Year of construction: 1998, Overview This complete glass bottling line was manufactured between 1996 and 1998 by various European manufacturers. The line is designed for the filling and packaging of bottles and includes depalletizing, rotary light vacuum filling, capsule application and smoothing, corking and screw capping, and automatic palletizing. The equipment is suitable for automatic bottling operations with a production capacity of approximately 10,000 bottles per hour.  Technical data - Capacity: approx. 10,000 bottles/hour - Application: Automatic bottling and packaging of bottles - Filling system: Light vacuum filling - Rinser: Penetrating nozzle rinser - Cleaning system: Compatible with automatic CIP cleaning - Closure types: - T-top corks - Pilfer caps - Stelvin caps - Compatible closure sizes: Bwedpfxozh Ikds Albet - 31.5 × 44 mm - 30 × 60 mm - Capsule application: Automatic capsuling machine with integrated thermal heads for PVC capsule smoothing - Capsule smoothing: Automatic smoothing machine for complex capsules and tin capsules - Palletizer: - Drag-type automatic palletizer - Compatible with European and American pallets - Format memory for up to 15 palletizing patterns - Utilities: - OCME Dorado 162-T Depalletizer: 6 kW - Irundin 36/44-8 Filler: 10 kW - Robino & Galandrino M. Monostadio Z T 6: 4 kW - Nortan Aurora 160: 3 kW - Tedelta CR 504: 3 kW - OCME P115/N/S Palletizer: 15 kW Scope of Delivery  - Depalletizer | OCME | Dorado 162-T | 1998 | High-speed drag depalletizer - Rotary filler | Irundin | 36/44-8 | 1998 | Light vacuum filler with penetrating nozzle rinser and CIP compatibility - Capsule applicator | Robino & Galandrino | M. Monostadio Z T 6 | 1998 | Automatic capsuling machine with integrated thermal heads - Capsule smoothing machine | Nortan | Aurora 160 | 1996 | Automatic capsule smoothing machine - Corking and screw capping machine | Tedelta | CR 504 | 1998 | Automatic closure application for corks, pilfer and Stelvin caps - Automatic palletizer | OCME | P115/N/S | 1998 | Drag-type palletizer with format memory

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 3,550 mm, total width: 2,600 mm, overall weight: 2,500 kg, space requirement height: 2,600 mm, space requirement length: 3,600 mm, space requirement width: 3,000 mm, 300-liter stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. With agitator, jacket, and electrical panels. Motor specifications: 43.19 kW at 50 Hz, 400 V Volume Total capacity 300 L Material Stainless steel Technical specifications Model VAS 300 Year of manufacture 2014 Equipment configuration Agitator Jacket Electrical panels Bwodpfx Alev Rr E Ijbet Transport information Length 3550 mm Width 2600 mm Height 2500 mm Weight 2500 kg Manufactured by Glass

Condition: new, Year of construction: 2024, total height: 1,800 mm, total width: 1,000 mm, total length: 2,000 mm, Glass storage rack suitable for storing and transporting glass and other sheet goods. Bwsdpfx Ajxddcholbet Load capacity: 2000Kg Length: 2000mm Width: 1000mm With appropriate inclination angle. The racks are suitable for cranes, with points suitable for connecting a crane on top. With rubber pads to prevent damage to the stored glass or other materials. A forklift space is provided at the bottom. The racks are completely new, have CE certification and a data plate. Discount for larger quantities! Ask about stock!

Condition: ready for operation (used), Year of construction: 2009, A fully automatic rotary labeling machine Anker (KHS Group) is available. Labeling method: wet glue labels, bottle formats: 250ml/500ml/750ml, label dimensions 1 X/Y: 33mm/119mm, label dimensions 2 X/Y: 36mm/150mm, label dimensions 3 X/Y: 48mm/158mm, labeling capacity: 20000bottles/h. Including formats for wet glue and VE+RE. Documentation available. An on-site inspection is possible. Bjdoyv H Iyspfx Albewt

Condition: ready for operation (used), functionality: fully functional, Complete line for filling and packaging wine bottles. For a full description, see the attached PDF file. Bwodpoyn I Tmsfx Albjt

Condition: used, loading : 75 to 80 % 2,77 kW Bwsdpfx Ajzum Dvolbet tiltable drum with 2 arms pneumatic: 6 bar outside dimensions (l x w x h) : ± 2.110 x 1.100 x 1.650 mm

Condition: used, Year of construction: 1984, Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling. Additional title: cleaning and filling Capacity: 60 Keg/h each 50 l Operation / Control: Siemens S7-300 Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet Bwjdsztx Uwopfx Albot

Condition: used, Year of construction: 2008, machine/vehicle number: DEPAL43, Used TMG VEGA 60 automatic Depalletizer 5000 BPHTechnical Specifications & Performance DataThis Automatic Depalletizer VEGA 60 is a robust solution engineered for reliable bottle handling in industrial packaging environments. Manufactured by TMG, it supports efficient unloading of bottles from pallets and integrates automatic interlayer management for streamlined operation. With a production speed of 5000 bph, it is well-suited for medium-capacity beverage production and used bottling line applications. Its design ensures consistent performance for Glass containers, particularly in 1.5L formats.Manufacturer: TMG Model:VEGA 60 Year: 2008Production speed: 5000 bphBottle formats: Compatible with 1.5L bottle formatsContainer types: Designed for Glass bottle handlingAutomation: PLC-controlled operationSafety: Electronic safety barrier Interlayermanagement: Tier-sheet magazine with automatic interlayer removal; can remove protective hoods from the same magazine Advanced Automation & Control Systems The VEGA 60 features PLC-based automation for precise and repeatable operation across shifts. The control logic enables smooth layer-by-layer depalletizing, coordinated motions, and clear fault diagnostics. The electronic safety barrier provides active operator protection, ensuring safe access during setup and maintenance while maintaining productivity. Quick settings allow fast adaptation to standard 1.5L bottle handling and efficient start-up after pauses.Production Line Integration CapabilitiesThis depalletizer integrates easily within new or second hand bottling equipment configurations. It can operate as a standalone depalletizing module or inline with conveyors, accumulation tables, rinsing machines, and downstream filling, capping, and labeling machinery. The automatic tier-sheet handling reduces manual intervention between layers, improving flow to subsequent packaging machinery. Its design supports Glass bottle logistics, making it a flexible choice for beverage production lines handling water, juice, beer, or wine in compatible formats.Machine Condition & Maintenance HistoryProfessionally engineered by TMG in 2008, this machine is presented as a second hand industrial packaging asset suitable for immediate integration once installed and commissioned. The PLC control and robust mechanical design contribute to predictable maintenance intervals and long service life.Operational Performance & VersatilityAt 5000 bph, the VEGA 60 is ideal for medium-output operations seeking dependable depalletizing performance. Automatic interlayer and hood removal minimize manual handling, reducing changeover time between pallet layers and enhancing workplace safety. The system is optimized for 1.5L bottles and supports Glass containers, aligning with a wide range of beverage production requirements and used bottling line upgrades.Installation Requirements & Site PreparationThe depalletizer requires adequate floor space for pallet infeed, tier-sheet magazine access, and discharge conveyor alignment. Power supply must match the PLC and drive requirements, and provision for compressed air may be needed for actuators and safety systems. A level, reinforced floor and clear operator access paths are recommended t... Bwsdpfxjzc Hqys Albjt

Condition: used, Year of construction: 1992, Overview This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Technical data - Capacity: 30,000 litres/hour - Application: Carbonated mineral water - Configuration: Carbonator with pumps, tank, and accessories - CO₂ rate: max. 8 g/litre - Drive: Siemens S7 Scope of Delivery - Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system Bjdpfx Aozavp Hslbswt - Pump system  - Tank | KHS  - Control system | Siemens | S7 

Condition: used, Year of construction: 1992, Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data - Manufacturer: O+H / KHS - Model: Hansacan can filler Bwodpfx Aljzlqu Hebot - Seamer: Ferrum can seamer, F 505 G - Year of manufacture: filler 1992, seamer 2010 - Machine type: rotary can filler and seamer monoblock - Filling valves: approx. 30 (type Hansacan) - Seaming heads: 5 - Capacity: approx. 20,000 cph at 0.33 L (product- and temperature-dependent) - Can format: 330 ml standard cans, can type 211 / 202 - Products: beer, carbonated beverages - Control: Siemens S7 PLC with Siemens SIMATIC touch HMI Equipment - Filler and seamer supplied as one blocked unit - New electrical panel with Siemens S7 PLC and SIMATIC touch HMI (reconditioning scope) - New pneumatic panel with renewed pneumatic valves (reconditioning scope) - Beer regulating valve ahead of the beer inlet, CIP tulips and CO₂ injection before seaming - Set up for can type 211 / 202, 330 ml - Manuals, spare-part list and electrical documentation for filler and seamer (provided with the machine) - CE declaration to be issued on completion of reconditioning Condition Used - currently undergoing a complete reconditioning at the workshop and to be delivered fully overhauled, supplied as a blocked filler and seamer unit. The reconditioning scope and the CE declaration are committed as part of the sale and are not yet complete. The block was previously in production in a commercial brewery filling 330 ml cans. Availability On request, after completion of the reconditioning. Location and firm delivery date on request.

Year of construction: 2008, condition: excellent (used), GLASS VAS VSM 1000 ID.NO. 2416 Bodpfjixz Tnjx Albswt GLASS VAS VSM 1000 liter chopping / processing machine year mod 2008. Suitable for making mayonnaise, hummus, sauces, pastes, dairy products and much more! Available for immediate delivery!

Condition: used, Year of construction: 2005, Overview This SIDEL FILLING S.r.l. E-JET 40 is a rotary rinser for glass bottles, equipped with 40 rinsing valves (pitch 113 mm). It currently operates within a complete cider filling line and handles glass formats from 25 cl to 1.5 L. A separate water filtration system with manifold piping, pressure gauges and manual valves is included. The machine is enclosed in stainless steel framing with transparent safety guards and features rotary bottle handling with starwheel transfer. It is still installed and under power, remains in production until end of October 2026, and can be visited in operation on request. Technical data - Manufacturer: SIDEL FILLING S.r.l. (Parma, Italy) - Model: E-JET 40 - Year of manufacture: 2005 - Machine type: rotary bottle rinser, glass - Rinsing valves: 40 (pitch 113 mm) - Products: cider, carbonated beverages - Formats: 25 cl / 27.5 cl / 33 cl / 50 cl / 75 cl / 100 cl / 150 cl - Capacity: up to 18,000 bph (0.33 L), approx. 14,000 bph (0.75 - 1.0 L) - Dimensions: approx. 290 x 240 x H 230 cm - Weight: approx. 3,400 kg - Power: 6.5 kW installed (400 V, 50 Hz) - Air: 6 bar operating, approx. 100 Nl/min - Water: 3 bar, approx. 2,500 l/h Equipment - Water filtration system with manifold piping, gauges and manual valves - Spare parts package - OEM technical documentation and machine layout drawing Condition Used - in production, still installed and under power. Last major maintenance: April 2026. Availability Bedjzidx Hopfx Albswt From end of October 2026 (week 43). Location: France. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 1984, A carousel system for cleaning the inside of and filling kegs. Bwedpfxoztyyzo Albjt Additional title: cleaning and filling Capacity: 60 Keg/h each 50 l Formats: 20 l-, 30 l- and 50 l-keg-barrels (DIN and Euro) Base construction: rotary Features: 4 cleaning heads, 1 filling head

Condition: used, Year of construction: 2005, Overview This Labeling Machine was built in 2005 by Gernep. It was in operation in a fruit juice plant in Germany till 01/2022. In this company it was only used in single-shift operation for about 100 days a year, which is why the condition of the machine is still very good. Tech Specs: - Capacity: 6,000 bph at 1L bottles Bodpfx Aol Hxzvelbswt - Number of aggregates: 2 Accessories: - Formats for 1.0 l VdF glass bottles, 0.7 l VdF, 0.2 l glass bottles goiter neck - Various spare parts included

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, The machine is being sold on behalf of the owner. The current owner will perform one more maintenance service for the new buyer. The machine has been used very little and has so far only packaged 6,547 units. It is ideally suited for packaging various loose food products, such as: Coffee Spices Rice Tea and much more. Since the machine is no longer needed, it is now for sale. An inspection and functional test can be arranged at any time. Condition: technically perfect, only slightly dusty. Location: 04668 Großbardau If you have any questions or are interested, please contact us by phone: Tel.: 0152 / 31381635 Bjdpfjzvd A Sex Albswt

Condition: used, Year of construction: 1984, Glass bottle filler and capper equipped with short-tube filling valves for filling bottles to a specific level (volume filling). The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). Additional title: Short-tube filler with pre-evacuation and crown cap sealer Capactity: 44000 bo/h Number of filling valves: 90 pcs. Bodpfozi Alxsx Albswt Number of capping heads: 15 pcs. Formats: 0,5 l NRW bottles; crown caps Material: housing and contact surfaces from stainless steel Base construction: caroussel-type filling and capping block Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective housing with doors; control cabinet with fittings; control panel with touchscreen

Condition: used, Year of construction: 2013, machine/vehicle number: LC634, Used BERTOLASO Epica filling line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum fillingBottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)Labeling: Wet glue, front and back application (Cavagnino & Gatti C4810)Inspection: Fill level check (Logilevel plus)End-of-line: Case packer, case sealer, case coder, spiral elevatorsElectrical supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated)Key models/years: 1994–2022 across sub-systemsAdvanced Automation & Control SystemsThe line integrates automated handling and quality control to ensure consistent beverage production. The Bertolaso monoblock provides synchronized rinsing, filling, and capping with centralized controls for format management. The Logilevel plus inspection system supports automated fill-level verification to maintain product quality. Conveyors, case handling equipment, and the labeling station operate with coordinated start/stop logic, enabling smooth, continuous flow across the production line. Electrical architecture is standardized around 415 V / 50 Hz, with auxiliary devices at 240 V / 50 Hz, facilitating straightforward integration with typical industrial power systems. Operator access points and changeover settings are designed to support efficient adjustments between formats.Production Line Integration CapabilitiesThis second hand industrial packaging solution offers full in-line operation from bottle depalletizing to finished case handling. It is configured for both PET and Glass containers, including flask-shaped and round bottles, and is suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors connect every module, while the case erector, case packer, sealer, and printing functions ensure complete end-of-line packaging. The wet glue labeller supports dual-panel (front/back) applications to meet brand presentation requirements. The Spiralveyor equipment assists with elevation changes and compact layouts.Machine Condition & Maintenance HistoryThis used bottling line comprises components manufactured between 1994 and 2022, with the core filling monoblock from 2013 and subsequent upgrades at inspection (2017) and end-of-line elevation (2022). The balanced mix of modern and proven machinery delivers reliable performance for beverage pr.. Bwjdpfx Aoy Szcwolbjt

Condition: like new (used), Year of construction: 2006, GLASS VAS 40 ID.NO. 2853 GLASS VAS 40 process machine for mixing & emulsions. Year mod 2006 built-in steam generator to be able to process the products under heat and pressure. Very nice machine that has previously been at a charcuterie school. Dimensions 260 x 160 cm Height 215 cm. Bedpfx Asu Ivaujlbjwt

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Bsdpfx Aewh U Avolbowt - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel