Used Keb 15.F5.Gbe-Ym00 for sale (16,149)

Condition: good (used), - Table surface: 457 x 152 mm - Maximum distance between grinding wheel and table surface: 400 mm - Grinding spindle power: 2.2 kW - Grinding wheel dimensions: 200 x 25 mm diameter - Grinding wheel rotation speed: 1000-4000 rpm - Table travel speed: 1-25 m/min Laodpfxswlhtvj Ancja - Minimum programmable increment: 0.001 mm - Dimensions: 1800 x 1200 x 1950 mm

Condition: excellent (used), Year of construction: 2011, volume flow: 1.98 m³/h, operating pressure: 10 bar, pressure: 13 bar, ALMIG BELT 15 screw compressor 15 kW motor Capacity: 1.98 m³/min Pressure: 10 bar Ledpfx Aewxzf Ssncjaa Year of production: 2011

Condition: good (used), Year of construction: 2014, functionality: fully functional, conveyor belt length: 2,510 mm, conveyor belt width: 415 mm, conveyor belt speed: 60 mm/s, total length: 2,040 mm, total width: 660 mm, total height: 1,265 mm, overall weight: 110 kg, discharge height: 575 mm, power: 0.12 kW (0.16 HP), TAF item number: 1000005779 Manufacturer: Amboss + Langbein Year of manufacture: 2014 Overall dimensions (LxWxH) in mm: 2,040 x 660 x 1,265 Width incl. side panel in mm: 790 Width incl. drive in mm: 660 Side height in mm: 220 Conveyor length, total in mm: 2,510 Conveyor length, horizontal in mm: 1,310 Lsdpfx Asxtaaujncsaa Conveyor length, vertical in mm: 1,200 Conveyor width in mm: 415 Belt type: Plastic hinged plate belt and plastic cleats Belt width in mm: 430 Cleats (cleat height/cleat spacing) in mm: 30 / 485 Substructure: Rollable / height-adjustable Sliding surface: steel Inlet height in mm: max: 575 min: 325 Outlet height in mm: max: 1,460 min: 1,210 Drive: head drive Motor type: gear motor, TPG3A4N Motor data: 0.12 KW Conveyor speed in m/s: 0.06 Net weight in kg: 110 Special features: Includes cycle control, continuous operation possible, automatic stop in case of belt blockage Condition: used / fully functional Function test: OK

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 Laedpfx Ajx Eifkencoa The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: excellent (used), For sale: professional defibrillator/monitor LIFEPAK 15, a highly regarded model from Physio-Control / Stryker, year of manufacture: 2017. The device powers on fully – the display, menu, and rhythm monitoring functions work correctly (as shown in the photos). Equipment and features: • LIFEPAK 15 monitor/defibrillator – REF 99577-001390 • Serial number: 45974928 • Year of manufacture: 2017 • Two LP15 MPB batteries • Integrated thermal printer • Modules: ECG, SpO₂, NIBP, CO₂ (ports visible in the photos) • Manual and AED modes • Large color display • Original side and top carrying bags Lasdpfxoxy S I Re Ancea Condition: Used equipment, in good technical condition. Typical signs of use on the housing, no mechanical damage. The device starts up and enters operation mode – see photos for demonstration. Ideal for: • Medical facilities • Emergency rescue services • Medical event coverage • Training and educational medical applications Viewing and testing on site possible. Courier shipping or personal pickup available.

Condition: excellent (used), For sale: professional screw compressor from renowned German manufacturer BLITZ Lsdpfx Ansy A Tp Rjceaa Model: Monsun Pro Eco 15 – industrial unit with excellent build quality, quiet operation, and high performance. Ideal for workshops, production plants, paint shops, and wherever constant and stable air pressure is required. ⸻ TECHNICAL SPECIFICATIONS: • Manufacturer: Blitz • Model: Monsun Pro Eco 15 • Motor power: 15 kW • Working pressure: 10 bar • Capacity: approx. 2.0 m³/min • Speed: 1500 / 3000 rpm • Year of production: 2011 • Power supply: 400V (3-phase) ⸻ OPERATING HOURS: • approx. 17,954 h ⸻ EQUIPMENT: - Control panel - Sound-insulated enclosure - Installation ready for connection - Compact design ⸻ TECHNICAL CONDITION: • Compressor fully functional • Normal signs of wear • Operates correctly ⸻ APPLICATION: • Automotive workshops • Industry • Manufacturing • Paint shops • Service centres

Condition: used, machine/vehicle number: 10E5T60-1001, KEB Automation EMC Filter, part no. 10E5T60-1001, is an advanced passive component from the COMBILINE series, designed to eliminate high-frequency electromagnetic interference in drive systems. The device is specifically dedicated for use with KEB COMBIVERT F5 series inverters (housing sizes F4 and F5). Technical Specification: - Rated Voltage (UL): 480V AC - Max. Input Voltage: 3-phase, up to 528V AC - Rated Current (UL): 6.7 A - Rated Current (nominal): 8.0 A - Mains Frequency: 50/60 Hz - Number of Phases: 3 phases + PE - Operating Temperature Range: up to 45°C (Class 3K3) - Protection Degree: IP20 Lasdpfey Dqbmex Ancja Key Functions and Application: - Interference Suppression: The filter effectively blocks conducted radio frequency interference (RFI/EMI) in the range of 150 kHz to 30 MHz. - Mains and Device Protection: Prevents harmonics generated by high-speed IGBT switching in inverters from entering the power grid, protecting sensitive electronic equipment. - Standard Compliance: Helps meet EMC requirements according to EN 61800-3 for categories C1 and C2. - Mounting: Designed for control cabinet installation, often on a 35 mm DIN rail.

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Lsdjxmt Eqjpfx Ancsaa

Condition: excellent (used), For sale: Geared motor from the renowned German manufacturer KEB Antriebstechnik. Robust industrial design intended for continuous operation in demanding conditions. The unit delivers high torque at low speed, ideal for machinery, conveyors, feeders, and industrial applications. Technical data Manufacturer: KEB Antriebstechnik Model: ZG 2 KPR 71 G 6 TS 140 G 92 Power: 0.55 kW Output speed: approximately 20 rpm Torque: 259 Nm Voltage: 230/400 V Frequency: 50 Hz Protection rating: IP55 Mounting type: B3 foot-mounted Weight: approximately 26 kg Dimensions Shaft diameter: approximately 30 mm Ledpfx Aneywaq Decoaa Shaft length: approximately 60 mm Condition Used Technically fully functional Visible signs of use and surface rust on the shaft Visual condition as per photos

Condition: good (used), Bandall BA 24/15-30 Banding Machine One of the most recognizable banding machines in the world, a market leader. Manufactured by Bandall, the Netherlands. Machine in very good condition, recently serviced. Year of manufacture: 2016 The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone frame with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Ledjyurznjpfx Ancsaa Controlled via an LCD panel. Technical specifications: Tape width: 30 mm Performance: 36 cycles/min Machine opening dimensions: 320 x 160 mm A roll of film is included.

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Speed 2500 rpm Partial overhaul 2014 Lodpfx Anevfm I Tocsaa - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin We have ALL spare parts for this series (SHW UF 5) in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2 New tractor with dealer daily registration prior to delivery Standard equipment / technical data Engine Rated power (ISO): 82 / 110 kW/hp at 2200 rpm Maximum power: 86 / 115 kW/hp at 2000 rpm Maximum torque: 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4 valves, STAGE 5 Regulated turbocharger, SCR catalytic converter DOC – Diesel oxidation catalyst SC soot particle filter One-piece, tiltable engine hood Exhaust on right side, in front of cab Fuel tank capacity: 198 liters / AdBlue: 18 liters Transmission / PTO 16/16-Speed Dyna-4, SpeedMatching, 40 km/h PowerControl left-hand operation with powershift reverser, 4-step powershift Permanently cooled wet multi-plate clutches with independent lubrication system Dual-speed PTO: 540 / 540E / 1000 rpm Electronic shift in cab PTO START/STOP button on left rear fender Hydraulics / Rear linkage Open Center system, 58 l/min total flow, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, pressure relief + 1x single/double-acting, neutral leak, SST Category 3 quick coupler with balls and catcher bowls CAT 3/2 Lower link draft control 5,200 daN maximum lift force, 2 external lift cylinders Adjustable lift rods on both sides and 2 side stabilizers EHR with external operation on both rear fenders Electrical equipment Thermostart, 120 A alternator Electric battery isolation switch 12 Volt power supply for external devices with socket Axles / Additional weights Rear axle ND with flange hub Oil-cooled disc brakes Height-adjustable automatic drawbar Rear fender outer width 2.00 m, without extensions Front weight carrier with integrated drawbar and towing pin Driver's station Standard cab with vibration damping, standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glass Doors on both sides with safety steps Adjustable steering column (height & tilt) Air-suspended driver's seat with armrests, swivel adapter, and seat belt 2 large telescopic exterior and wide-angle mirrors Interior mirror Analog-digital dashboard (SIS) Radio pre-wiring with antenna and speakers 4 work lights each at the front and rear of the cab roof 2 headlamps each in the engine hood and on the handrails, 2 work lights on rear fenders Rear window washer/wiper All-wheel front axle with selectable differential lock Special equipment With fuel tank protection PowerControl & brake to neutral (clutch effect) 100 l/min Open Center hydraulic system oil flow sharing (58+42 l/min) Lajdpfx Ajyvmq Isncja Leak oil collector at quick couplers 3 control valves: 1x pressure relief, double-acting, float, SST + 1x double-acting, neutral leak, SST + 1x double-acting, neutral leak, SST + free return 2.5 t front linkage, 1 hydraulic hose set, electrical socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear fender extensions Air conditioning Cab with mechanical suspension Telescopic exterior and wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver's seat, automatic setting with seat belt, swivel adapter, and armrests Rear window washer/wiper Automatic battery isolation switch, 12

Condition: used, power capacity / kW volt / V ampere / A Laedpfx Ajypwc Hjncja KEB MOTOR .001-3420

Condition: good (used), 2x F4; 4kW, 4-008-39-0553 1x F4; 7.5kW, 4-008-39-0555 1x F4; 2.2kW, 4-008-39-0765 Lodpfx Ansia Nvzsceaa 2x F5; 1.5kW, 09F5CBB-YM00 1x F5; 5.5kW, 13F5CBD-YM00 1x F5; 09F5C1B-YA13 + filter 10E5T60-1061 1x F5; HOMAG 13F5GBE-YA00 1x F5; G7F5S3A-2620 + filter 07E5T60-0062

Condition: excellent (used), New Cybelec CybTouch 15 cnc touch screen control on our quality used Edwards Pearson 6axis cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson RTB 100 T / 3100 CNC Pressbrake 3metre x 100ton / 3100mm New Cybelec CybTouch 15 touch screen cnc control that communicates with offline software – offline software for this cnc Cybelec control available 4 axis back gauge – z1, z2, x and r axis – 6axis in total Machine is in good working condition and includes a full length set of upper & lower Pressbrake tooling. Lajdpfeq Ewkyox Ancoa

Condition: used, functionality: unexamined, Ferwood code: RU0009874 - Manufacturer code: 13.F4.S1E-4A01/1.2 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Laedpfx Anewthluocsa

Condition: new, Year of construction: 2014, Rothe Erde Standard Series RD900 Konecranes Gottwald ESP.8 Mobile Harbour Crane ,Slewing Bearing, 192.40.3150.100.41.1502 (Unused 2014); Konecranes , Ex Gottwald Ledpfxeyl Ange Anceaa HMK 260 E Outer Diameter Approx 3,388mm, Inner Diameter Approx 2,794mm. Weight Approx 3,683kg. Stock image used for illustrative purposes, actual product may vary. Note: Packed In Long Term Preservation Packing.

Condition: used, functionality: unexamined, Ferwood code: RU0005521 - Manufacturer code: 14.F5.GBD-YM00 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer refurbishment service, please contact us. 8.5 KG - 46X39X27 Lsdpsycft Tefx Anceaa

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 150 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, working range: 175 mm, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, IPG beam source – Laser class 1 · Made in Germany Workstation – Heavy-duty design: - Sit/stand workstation, aluminum housing, fully enclosed - Front door with laser safety glass, bright work lighting - Stainless steel work platform, 25 mm perforated grid (710 × 400 mm) - Manually movable drawer, precision rails, load capacity up to 150 kg - Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm) - Interlock, emergency stop, safety relay Performance Level 4 Fiber Laser: - Diode-pumped ytterbium fiber laser, 50 W - Pulse energy: 1.0 mJ, pulse duration 100 ns - Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz - Beam quality M² < 1.2 - Air-cooled, power consumption < 400 W - Pilot laser + 2 distance lasers (laser class 2) Scanner & Optics: - F-Theta lens F = 160 mm (marking field 110 × 110 mm) - Optional: F = 254 mm, adjustment range up to table height - X-Y galvo scanner for 1064 nm - Max. scan speed 4 m/s Control & Software: - Industrial PC, Windows 11 - Monitor, keyboard & mouse, monitor arm - KOLLTRONIC marking software: text, logos, QR/DataMatrix, barcodes - Matrix function for batch processing - Easy positioning, focusing, designing, working, coding Additional equipment: - Rotary engraving unit for cylindrical parts up to Ø 60 mm - Controller & software upgrade included Operating conditions: - Power supply: 230 V / 50 Hz Laodeyim S Ijpfx Ancea - Operating temperature: 15–35 °C Condition: - New machine - CE compliant - Made in Germany

Condition: ready for operation (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here a used CS Sigma profile for sale. The indicated price refers to a price per piece. Included in delivery is: 01x CS Sigma profile, used material colour: cream white profile length: approx. 2.200 mm CS profile dim.: approx. 150 x 50 x 15 mm material thickness: approx. 2,25 mm weight / pcs.: approx. 10,500 kg The CS Sigma profiles can be bent, or show slight damage or slight damage or rust. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles Ljdpfx Ajgfbyzjnceaa (without unloading)

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Dexion Type: P90 The scope of delivery includes: 01x pallet racking beam, used Material color: sendzimir galvanized Box profile: 110 x 50 mm Beam type: SLB 110|15 Bracket: 5 HK Clear width: 2,900 mm Max. load per pair of beams 2,700 kg, with evenly distributed load Lasdpfx Anjtpf Igscoa 02x locking pin, used Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out Currently available from stock: 1560 pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: ready for operation (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here a used CS Sigma profile for sale. The indicated price refers to a price per piece. Included in delivery is: 01x CS Sigma profile, used material colour: cream white profile length: approx. 2.000 mm CS profile dim.: approx. 150 x 50 x 15 mm material thickness: approx. 2,25 mm weight / pcs.: approx. 10,000 kg Lajdsgfbytepfx Ancea The CS Sigma profiles may be bent, or have slight damage or rust slight damage or rust. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Ledstuwk Uspfx Ancjaa

Condition: ready for operation (used), Year of construction: 2010, Nominal power: 160kVA, including NH isolator with capacitors, GBE T119 DIN monitoring, 5 medium-voltage switches and 1 measuring transformer cabinet with instrument transformer. weight: 1.06t. On-site inspection is possible. Laedporck D Hefx Ancoa

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 Laedpfskvrptsx Ancoa -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg