Used Jaespa Bandsaw - Horizontal for sale (6,681)

Condition: used, Year of construction: 1990, cutting diameter 420 mm Bledpfez Ek A Ijx Amron saw band length 6300 x 41 x 1,3 mm cutting speed 10 - 130 m/min saw band length 4870 x 27 x 0,9 mm total power requirement 9,0 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,5 x 2,35 x 2,1 m Fully automatic band saw - Control Minipos 807 - with chip conveyor

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and Bledpefg E Iajfx Amrjn semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve Bedpefg E Hlsfx Amroln • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, cutting diameter 255 mm dimensions of saw-band 2750 x 27 x 0,9 mm cutting width 200 x 320 mm cutting speed 20 bis 80 m/min 125 mm 125 x 125 mm 195 mm Impact energy 350 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 290 Kg Blsdpeynni Usfx Amrsn dimensions 1,1 x 0,8 x 1,75 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm cutting speed 45/90 m/min 120 mm 120 mm 190 mm Impact energy 170 mm connected load frequency 400 Volt total power requirement 1,1 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double miter band saw Bedpfxoynnklj Amroln -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 18 - 110 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t Bledpfsnq Sanox Amron dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: used, Year of construction: 1992, cutting diameter 260 mm saw band length 3890 mm cutting width 340 mm cutting speed Stufenlos m/min total power requirement 2,4 kW weight of the machine ca. 1,5 t Bedpfx Aou Rt Hdomreln dimensions of the machine ca. 2,5 x 1,4 x 2,0 m Vice can be adjusted for angle cutting.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for Blodpfxod Iipmo Amrjn series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: not inspected (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Bljdpfxsvf N Sus Amren Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.

Condition: used, Year of construction: 1996, cutting diameter 460 mm saw band length 8350 x 41 x 1,3 mm mm cutting width 1660 mm total power requirement 30 kW weight of the machine ca. 21.900 kg KASTO BBS 460/1660 2 identical machines (same photos; the other machine was built in 1998) Blsdpfozmy S Rex Amren Manufacturer: KASTO Maschinenbau GmbH & Co. KG Address: Industriestr. 14, D-77856 Achern-Gamshurst, Germany Type: BBS 460/1660 (Block Band Saw / Horizontal Bandsaw) Series: 101 Machine No.: 63191010041 Year of Manufacture: 1996 DIMENSIONS & WEIGHT Weight: 21.900 kg (data card) / approx. 17,700 kg (foundation plan) Material Support Height: 1,550 mm Machine Footprint (L x W x H): approx. 1.24 × 3.28 × 3.49 m Minimum Installation Space (with accessories/options): approx. 20.19 × 10.67 × 3.95 m Cutting Range (at 90°) Round Material: Ø 460 mm Flat / Block Material: 1,660 × 460 mm SAW BLADE Standard Sizes: 8,350 × 54 × 1.3 mm or 8,350 × 41 × 1.3 mm Alternative (per data card): 8,350 × 54 × 1.3 mm Kerf Width (Set): approx. 2.4 mm Band Wheels: 3 × Ø 350 mm Recommended Quality: Super Bi-Metal Saw Blades (M42) for mild steels, high-alloy tool steels, and stainless steels For extremely hard materials: Carbide-tipped blades PERFORMANCE DATA Band Speed: infinitely variable 14 – 75 m/min Feed Rate (Step Feed): infinitely variable 0.7 – 220 m/min Electrical Connection: 400 V / 50 Hz / 30 kW (total connected load) Coolant Capacity: 6.5 l Noise Level: 73 dB(A) Function Manufacturer Type Power (kW) / Current (A) Speed (rpm) ----- Saw Motor Sieber VM6-1054/750/4 7.5 kW / 15.6 A 1500 Hydraulic Motor BauKnecht DT90-S4F 1.1 kW / 3.0 A 1500 Hydraulic Power Unit Rexroth UL 205S2016294/1 2.2 kW / 5.6 A 1500 Roller Track Motor SEW KG 35 1.2/4.8 kW / 4.6/10 A 750/3000 Band Speed Motor SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Rapid Traverse (Eilgang) SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Adjustment Motor Sieber DE26.18 kW / 0.6 A 3000 Coolant Pump Brinkmann TS12/190-65 0.27 kW / 0.63 A 3000 Coolant Pump Brinkmann TB 100/270 0.24 kW / 0.44 A 3000 Chip Conveyor Pump Huber + Moser 693/8F 0.08 kW / 0.65 A 750 Chip Conveyor SEW SA 42 DT 71 DB 0.12 kW / 0.69 A 750

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Bsdpefg E H Rjfx Amrsln Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Bsdpefg E H Isfx Amroln Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. Blodpsfg E H Tofx Amrjn The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm Bsdpfx Amsfg E H Ujrsln turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the Bljdpjfgyicjfx Amrsn saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic Bedpfx Aofgyh Uemrsln GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 920 mm band speed 35 + 70 m/min connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 200 kg Berg & Schmid - GBS 185 Eco AutoCut Metal Band Saw Extremely fast and smooth sawing thanks to improved drive technology - Miter cuts up to 60° left Bodevn Uzaepfx Amreln - Suitable for dry and wet cutting - Coolant system - Machine base

Condition: used, Year of construction: 2018, Horizontal bandsawing machine Make: JAESPA Blsdpsudb Sfsfx Amren Model: Compact 2.8 Year of construction: 2018 TECHNICAL DETAILS: Automatic band saw - horizontal Cutting diameter 280 mm Saw blade length 5080 x 34 x 1.1 mm Cutting area flat 330 x 280 mm Cutting width 330 mm NC control Feed 460 mm Cut-off lengths 9999.9 mm Speed 15 - 120 m/min Machine weight approx. 2.3 t Dimensions approx. 3250 x 1580 x 2050 mm Column design for heavy-duty, industrial use o Intuitive NC control of the machine via PLC WAGO and 7" color touchscreen. Frequency-controlled, infinitely variable belt drive Saw arm with highly sensitive feed movement via servo motor and ball screw ball screw Backlash-free linear guides in both columns Hydraulic material clamping with long-stroke cylinder in front of and behind the saw blade saw band Clamping vice and lifting jaws open on both sides with infinitely adjustable clamping pressure clamping pressure Material feed via servo motor and ball screw drive in chain dimension the repeating operation is clocked. Unlimited material feed length Fully hydraulic saw blade tensioning Automatic saw blade guide arm adjustment Fully equipped with chip conveyor

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 35 + 70 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m Double miter metal band saw, GBS 250 Super AutoCut (20413) - Miter cuts up to 60° left and 45° right - Ball bearing rotary table Quick clamping device Solid, large material support Bjdpfx Aourc S Rsmreln Automatic cooling

Condition: good (used), Year of construction: 2002, Bandsaw – Automatic Jaespa Compact 2 Year of manufacture: 2002 Internal machine no. 50 - High-performance bandsaw automatic, heavy-duty, hydraulic production bandsaw - Parallel sawing feed system in profile guide rails - Mitsubishi NC program control E1032 for preselection of 90 programs, each with a specific quantity and corresponding section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw spindle, 950 mm stroke, any desired section length from 3 mm to 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening Bljdpfx Asylwawomrsn on both sides - Material clamping with double clamping device in front of and behind the saw blade - Remaining piece length in automatic operation: 90 mm - Max. section length in automatic operation: unlimited - Material support height 850 mm - Incl. 6 meter roller conveyor - Coolant tank 50 l

Condition: new, cutting diameter 315 mm dimensions of saw-band 3460 x 1,1 x 34 mm cutting speed 35 / 70 m/min cutting width 400 x 250 mm 250 / 280 mm Impact energy 220 / 280 mm 180 mm 140 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions 2,1 x 1,0 x 1,5 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device Bljdpfswfyq Tex Amron - Tape tension control via manometer - Electr. automatic cooling

Condition: like new (used), Year of construction: 2025, Flexible horizontal band resaw with tiltable conveyor Modern resaw with impressive features : Cast iron dynamicly balanced wheels Hydraulic blade tension Inverter controlled feed system Automatic pressurised lubrication system with reservoir tank Bljdpfx Aoydk Hnsmrjn External control panel 22.0 KW motor - latest IE-3 energy efficient motor Tilting conveyor up to 45 degrees * very suitable for shiplap cladding, wall cladding * Maximum material size (W X H): 300mm x 300mm Feed speed (variable): 0~18 m/min same as new

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, Bsdpshpktvjfx Amrjln - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar Bjdpfx Amjd Iiptsrjln • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 330 mm 400 x 310 saw band length 3820 x 34 x 1,1 mm band speed 22 - 88 m/min table height 930 mm total power requirement 2,2 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 2,22 x 1,2 x 2,1 m Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. • Adjustable quick-release • Material height sensor Semi-automatic function: Blsdowinykepfx Amrsn 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise