Used Integra Ep 400/4 for sale (67,967)

Condition: excellent (used), Year of construction: 2010, Loading crane Iijdpfx Aaszldtie Eod HIAB 1 EP-4 Year of manufacture 2010 4x hydraulically extendable 5th and 6th function Remote control Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Iiodjzg Emyopfx Aa Eod -Hydraulic power unit: with hydraulic reservoir, filter and valves -Type: NHY-40-12.2-160-4/400/230V -Hydraulic pump: Pressure up to 200 bar -Flow rate: 12 l/min -Motor: -Hydraulic reservoir: with level indicator -Individual components: see photos -Dimensions: 515/415/H680 mm -Weight: 79 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 12 kg, power: 45 kW (61.18 HP), controller model: SIEMENS Simatic, TECHNICAL DETAILS Drum diameter: 400 mm Maximum workpiece length: 700/1,000 mm Maximum individual workpiece weight: 12 kg Load capacity: 100 kg MACHINE DETAILS Control system: SIEMENS Simatic Installed power: 45 kW Centrifugal wheels: 4 units Centrifugal wheel type: Hurricane H 28 Isdpfx Aajzcl I De Eeid Power per centrifugal wheel: 7.5 kW

Condition: ready for operation (used), Schneider Electric ELAU PacDrive MC-4/11/22/400 SN: 2228230262 – the metal housing is slightly deformed in one area and one mounting point of the fan is damaged, see photo; used, in good condition, 100% functional, delivery as per photos. Iijdpsx Euckefx Aa Ejd

Condition: new, ELIN EBG PX 400 / 4.0C Elvovert frequency inverter, serial number as shown in the photo, unused in original packaging, 100% functional. Iedpfx Aei D Urqea Eoid

Condition: ready for operation (used), Elau MC-4 / 11 / 03 / 400 PacDrive MC-4 SN:897473.0060, the plastic front is slightly damaged see photo, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos Ijdpfx Aajp Hrzpo Eoid

Condition: ready for operation (used), Schneider Electric ELAU PacDrive MC-4/11/22/400 SN: 2228230252, used, in good condition, 100% functional, delivery as per photos. Iiedpfox Eucdox Aa Eed

Year of construction: 1996, condition: excellent (used), machine/vehicle number: L. 09/31, Fabr. No.: 0270180/1 Iiodpfxshpyr Us Aa Ejd Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pump installed The machine is being sold in its current condition. Iijdpfx Aasvfy Sxs Eed The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, mileage: 1,033,000 km, power: 368 kW (500.34 HP), first registration: 06/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 5,810 mm, loading space width: 2,500 mm, Year of construction: 2014, Equipment: ABS, air conditioning, crane, parking heater, Manufacturer Volvo Model FH500 6x2?4 Hiab 262 EP-5 Euro 6 Year 2014 Condition Good Serial Number YV2RT40C9EA764792 Ref. nr. 1357930 Reg. date: 12-06-2014 Hk: 500 Km: 1033000 Gearbox: I-shift Eurotype: 6 Diesel tank: 1 Tank liter: 610 Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 2 Cabin type: Globetrotter Coffee machine: ? Leather seats: ? Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? VEB+ Tire Size: 385/65 - 315/80 - 385/65 Cover% left 30 - 50 - 50% Front suspension: Air Suspension rear: Air Wheelbase: 4600 mm Toolbox: ? Total weight: 26000 kg. Iiedpfow Ak Siex Aa Eed Net weight: 16000 kg. Load capacity 10000 kg. Crane Manufacturer: HIAB X-Hipro 262 EP-5 Tonsmeter: 26 Remote control: ? Year: 2017 Extension extension (hydraulic): 5 Max range (hydraulic): 15 m.

Condition: used, mileage: 294,100 km, power: 235 kW (319.51 HP), first registration: 04/2009, fuel type: diesel, empty load weight: 15,270 kg, maximum load weight: 10,730 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, mtl. house, 1x comfort seat, double bench seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, AS-Tronic automatic, differential lock, fog lights, leaf, air, last axle liftable and steerable, noise reduction G1, aluminum side skid plates, roof hatch, environmental badge green, green badge, environmental badge green, green badge green. Aluminum side guards, roof hatch, green environmental badge Wheelbase: 3900 mm Body: Heil refuse body type PLK 21 M with Zöller bodywork transmission ZF 12 AS 2130, air conditioning, M cab, reversing camera. The engine power can be increased to 400 hp! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iiodpfx Asvhiu Ija Eed - .

Condition: used, mileage: 124,525 km, power: 235 kW (319.51 HP), first registration: 05/2014, fuel type: diesel, empty load weight: 15,000 kg, maximum load weight: 11,000 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, mtl. house, 1x comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), retarder, power take-off, AS-Tronic automatic, differential lock, fog lights, rotating beacon, air suspension, low-noise G1, lift+lower, last axle liftable, last axle hydr. steered, U-protection, aluminum side bumpers, roof hatch, green environmental badge Ijdpfx Aajvhirmj Eeid Wheelbase: 3900 mm Superstructure: VDL Translift E-Maxx FS side-loader refuse collection body ZF 6 HP 602 i=5.6-0.83 transmission with retarder and EST146, MAN BrakeMatic, M cab, tank capacity: 200l. The engine power can be increased to 400 hp! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, sheet width - max.:200 mm plate thickness:4 mm dimensions of the machine ca.:0,90 x 0,50 x 2,70 m Iedpecxxn Esfx Aa Ejid

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Ijdpoyxq A Hofx Aa Eeid Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: used, Year of construction: 1991, - Drilling diameter: 3–10 mm (optionally up to 22 mm) - Drilling depth: Max. 70 mm - Spindle distance: Adjustable from 45 mm to 540 mm - Hole spacing: Min. 3 mm, Max. 800 mm - Table size: 98 x 60 cm - Additional features: Drill length compensation, cooling/lubrication, speed control Iodpjwv D Haofx Aa Eoid

Condition: used, CNC universal tool grinding machine SCHÜTTE, type BU 400 CNC 4 Machine – Defective – without control system Machine not operational – electrically non-functional – without CNC control Manufacturer’s No.: Year of manufacture 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Distance between centers (height) 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Mains connection 380 volts, 50 Hz, 25 amps - CNC control system removed Space requirement L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control system missing. Mechanically in good condition, ideal for retrofitting with a new control system Isdpfx Aod Rmcmja Esid Suitable as a source of spare parts or for rebuilding with a new control system

Condition: used, Year of construction: 1994, total length: 4,700 mm, total width: 1,200 mm, total height: 1,600 mm, Colour: Grey Weight: 672 kg - Year: 1994 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 228822 - Main motor power [kW]: 4.5 - Max. cutting length [mm]: 4040 - Max. cutting height [mm]: 150 - Max. saw blade diameter [mm]: 400 - Arbor saw blade diameter [mm]: 32 - Voltage [V]: 380 - Power [kW]: 11.2 - Transport dimensions: 4700mm x 1200mm x 1600mm (l x w x h) - Transport weight [kg]: 672kg - Transport packages [pcs.]: 1 Iodpfxexbf E Sj Aa Eoid Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Gewicht - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Iodeu A I Elspfx Aa Esid Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: used, Year of construction: 1991, The Josef Foellmer 400/4, manufactured by Josef Foellmer in 1991, is a machine with a format of 980 x 600 mm currently in stock and located in Germany. This machine is equipped with a 4-head paper driller and an investment table with a tabulator measuring 98 x 60 cm. It also features speed regulation. The delivery terms are FCA. Iiedpfx Aevfxppoa Eed Format: 980 x 600 mm Equipment: Investment table with tabulator 98 x 60 cm 4 head paper drills Speed regulation

Condition: used, mileage: 432,488 km, power: 355 kW (482.67 HP), first registration: 09/2018, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 6x2, fuel: diesel, brakes: intarder, color: white, gearing type: automatic, number of gears: 10, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2018, operating hours: 169 h, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, = Additional options and equipment = - Aluminum fuel tank - Speed limiter - Air suspension - Particulate filter - Reversing camera - Sun visor - Toolbox Iisdeyiunmjpfx Aa Ejd - PTO (Power Take-Off) - Central lubrication system = Further information = Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steering; Suspension: leaf spring Rear axle 1: Tire size: 315/70/22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 2: Tire size: 315/70/22.5; Lift axle; Max. axle load: 7,500 kg; Steering; Suspension: air suspension Weights Unladen weight: 13,120 kg Payload: 14,880 kg Gross vehicle weight: 28,000 kg Functionality Mast: Telescopic Mast length: 15 m Lifting capacity: 28,000 kg Lifting height: 1,500 cm Crane: HIAB X-HIDUO 298 EP-4, year of manufacture 2018, mounted behind the cab Body brand: HIAB X-HIDUO 298 EP-4 CE certification: yes Identification Registration number: 20-BKX-9 EURO 6 480 HP 6x2 drive Differential lock 9-ton front axle Wheelbase: 340 cm Steering lift axle Air suspension Day cab Air conditioning Reversing camera Automatic transmission with engine brake Tractor version HIAB X-HIDUO 298 EP-4 4x hydraulic extensions 4x outriggers Total working height: 15 meters Maximum lifting capacity: 28,000 kg Maximum lifting capacity at 12.5 meters: 1,860 kg Radiographic remote control FOLLOW US NOW ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU РОЗМОВЛЯЄМО УКРАЇНСЬКОЮ

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Offer – Double Mitre Saw Emmegi Norma 400 Iedpfsw R T Tqex Aa Eeid We are pleased to offer you the Emmegi Norma 400 double mitre saw – a precise and reliable machine for professional cutting of aluminium and PVC profiles. Technical Data: - Saw blade diameter: Ø 400 mm - Cutting length: up to approx. 4,000 mm, minimum length approx. 485 mm - Saw head swivel range: ± 45° (inwards/outwards) - Drive: Hydropneumatic feed, motor power 2.2 kW per head, braking time approx. 10 s - Workpiece clamping: Pneumatic, horizontal and vertical, with 'low pressure' safety feature - Cooling: Oil-water micro-mist system

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Iisdpfx Aoh Rdxnea Esd Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Year of construction: 2020, condition: ready for operation (used), Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible. Iisdpfx Aswfg Hboa Eed

Year of construction: 2003, condition: excellent (used), KUAG PIPE-HAUL-OFF 400/4 CATERPILLAR Year of construction: 2003 Caterpillars: 4 with synchronous drive Diameter: Min 40mm Max 400mm Take-off speed: 0.2 - 10 m/min Condition: Very good operational Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany Isdswqym Espfx Aa Ejid

Condition: new, functionality: fully functional, Conveyor Belt EP 630/4 – 800 mm – 5+2 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following specifications: Width: 800 mm Type: EP 630/4 Polyester/Polyamide tension members Tensile strength: 630 N/mm 4 fabric plies Cover plates: 5 mm top / 2 mm bottom Rubber quality: 15 MPa (standard industrial grade, abrasion-resistant) Material: PE/PA Condition: New / unused Length: 40 m Areas of Application Ideally suited for use in: - Quarries & gravel plants - Recycling facilities - Agriculture - General industry and conveying technology Benefits - High tear resistance - Durable covers Iiodpfx Aexy Nt Rea Ejd - Good abrasion resistance - Suitable for medium to heavy-duty conveying tasks