Used Hesse Tafelschere Hesse&Co for sale (27,357)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 12100 € 232.32 € 2500 kg 1300 mm 450 mm 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Bdsdpjwirqaofx Aa Djb ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 2500 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Bdodpfxjwirp Ns Aa Dsb Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 45100 € 861.41 € Doppelsäulenführung 5200x34x1,1 mm 20-100 m/min 360 mm 360 mm 610x360 mm rund 360 mm, quadrat 360 rund 360 mm, quadrat 360 rund 325 mm, quadrat 265 735 mm 1.5 kW 3 kW 0.12 kW 2850 mm 2250 mm 1870 mm 2400 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch Bdodowirhxspfx Aa Dob user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,--

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 34400 € 657.04 € Doppelsäulenführung 4380x34x1,1 mm 20-100 m/min 325 mm 325 mm 400x325 mm rund 325 mm, quadrat 325 rund 300 mm, quadrat 265 rund 190 mm, quadrat 190 655 mm 1.1 kW 2.2 kW 0.12 kW 2130 mm 2150 mm 1650 mm 1860 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment Bodpfswirhrex Aa Djdb coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 38.900,--

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 11100 € 213.12 € Schwenkrahmen 3660x27x0,9 mm 20-100 m/min 320 mm 300 mm 320x300 mm 640 mm 0.37 kW 2.2 kW 0.12 kW 1900 mm 850 mm 1300 mm 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch Bdjdpfx Ajwirhfea Deb hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Condition: new, Year of construction: 2025, neu 2025 060077 prompt, Zwischenverkauf v Türkei 14200 € 272.64 € 1 1 Schwenkrahmen 4160x34x1,1 mm 15 - 120 m/min 320 mm 320 mm 450x320 mm rund 320 mm, quadrat 320 rund 320 mm, quadrat 320 Bjdpfowiq Rlsx Aa Dsdb rund 320 mm, quadrat 320 rund 320 mm, quadrat 300 rund 230 mm, quadrat 220 860 mm 0.37 kW 2.2 kW 0.12 kW 2230 mm 1150 mm 2140 mm 1030 kg Double mitre cutting Inverter Saw blade 34 Hydraulic vice Heavy duty gearbox Hydromechanic blade tension Saw band brush Digital read out for mitre angle Coolant equipment Operating manual in English or German OPTIONS: Roller tables and band saw blades on request

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 20100 € 385.92 € Doppelsäulenführung 4800x34x1,1 mm 20-100 m/min 380 mm 380 mm 520x380 mm rund 300 mm, quadrat 300 590 mm 0.55 kW 3 kW 0.12 kW 2850 mm 930 mm 1660 mm 1330 kg Bdjdewiq Nbspfx Aa Dob 2° inclined band blade brush control panel hydraulic vice hydromechanical blade tension inverter for continous adjustable cutting speed linear guides optical height adjustment pressure adjustment coolant pump saw band security switch heavy duty gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts hydraulic top clamping

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 29800 € 569.18 € Doppelsäulenführung 5400x41x1,3 mm 20-100 m/min 450 mm 425 mm 695 x 425 mm rund 430 mm, quadrat 425 rund 320 mm, quadrat 290 690 mm 0.55 kW 4 kW 0.12 kW 3090 mm 1200 mm 1940 mm Bedpfewiq Iqex Aa Dedb 1630 kg double linear guides hydraulic-mechanical bandtension saw bandbrush infinitely variable cutting speed sensitive cut regulation bi-metal saw band 41 coolant device thermal overload protection heavy duty gear optical height adjustment 3 ° inclined band hydraulic clamping of the vice user manual in GERMAN or ENGLISH OPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting line

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 50900 € 962.01 € Doppelsäulenführung 5750 x 41 x 1,3 mm 20 - 120 m/min 420 mm 420 mm 420 x 420 mm 805 mm 1.1 kW 5.5 kW 1 kW 0.12 kW 2860 mm Bdodpfxswiq Dfj Aa Deb 1980 mm 2100 mm 3700 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Sensitive pressure Inverter for stepless blade speed Chip brush Optical height adjustment Chip conveyor Operating instructions in GERMAN or ENGLISH

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 53900 € 1018.71 € Doppelsäulenführung 7000x41x1,3 mm 15 - 120 m/min 560 mm 540 mm 810 x 530 mm rund 520 mm, quadrat 520 rund 520 mm, quadrat 520 rund 330 mm, quadrat 330 Bedpfx Ajwiqx Noa Dsdb 875 mm 1.1 kW 4 kW 0.12 kW 3850 mm 1700 mm 2450 mm 3400 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available, additional price)

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 46400 € 886.24 € Doppelsäulenführung 6800x41x1,3 mm 20-100 m/min 560 mm 820 x 540 mm rechteck 550 x 540 mm rechteck 360 x 540 mm rechteck 550 x 540 mm 880 mm 1.1 kW 4 kW 0.12 kW 3800 mm 1750 mm 2350 mm 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH Bdjdswiqx Aepfx Aa Dsb (roller table see photo - optional available, additional price)

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 34400 € 657.04 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 540 mm Bdjdpfx Aaowiqxvs Deb 540 mm 750x540 mm rund 510 mm, quadrat 450 rund 270 mm, quadrat 250 695 mm 4 kW 0.12 kW 3000 mm 1300 mm 2150 mm 2445 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame 3° inclined saw band user manual in GERMAN or ENGLISH (the vertical hydraulic clamping shown on the photos ist optional equipment)

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 27700 € 529.07 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 560 mm 560 mm 750x560 mm rund 410 mm, quadrat 410 590 mm 1.1 kW 4 kW 0.12 kW 3400 mm 1000 mm 2050 mm 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch Bdjdpfx Aaswiqt Hs Deb operating manual in Englisch OPTION: turn table for mitre cuts hydraulic top clamping from above micro cooling unit laser cutting line

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 23800 € 456.96 € Doppelsäulenführung 5200x41x1,3 mm 20-100 m/min 460 mm 460 mm 650x460 mm rund 380 mm, quadrat 380 590 mm 0.55 kW 4 kW 0.12 kW 3100 mm 1000 mm Bdodpewiql Nofx Aa Dsb 1800 mm 1520 kg blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way material limit shaft height adjustment pressure adjustment coolant pump saw blade security switch gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts hydraulic top clamping from above

Condition: new, neu ca. 14 - 16 Wochen ab Auf Bdsdpfswirzlox Aa Djb Türkei 33700 € 643.67 € Doppelsäulenführung 6300 x 41 x 1,3 mm 15 - 120 m/min 440 mm 440 mm 640 x 440 mm rund 440 mm, rechteck 400 rund 250 mm, rechteck 250 rund 390 mm, rechteck 390 860 mm 1.1 kW 4 kW 0.12 kW 3150 mm 1850 mm 2115 mm 2050 kg 3° inclined sawing band blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way height adjustment pressure adjustment coolant pump saw blade security switch gearbox syncronized movement of sawing arm/clamping jaw hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH ALTERNATIV: Version BMSY 440 CDGH NC with automatic mitre adjustment by NC control

Condition: new, Year of construction: 2026, neu 2026 060215 Juni 2026, Zwischenverkau Türkei 9280 € 179.1 € Schwenkrahmen 3160x27x0,9 mm 20-100 m/min 270 mm 270 mm 340x220 mm rund 230 mm, quadratisch rund 150 mm, quadratisch rund 180 mm, quadratisch 910 mm 0.37 kW 1.5 kW 0.12 kW 1730 mm 770 mm 1460 mm 476 kg Bdjdpfx Aajwirkts Dsb DIGITAL ANGLE READ OUT blade brush control panel swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame quick lowering with automatic switchover to working speed using a sensor pin mech. Vice with quick clamping coolant equipment machine base chip collecting tray user manualin GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, Year of construction: 2026, neu 2026 060216 Juni 2026, Zwischenverkau Türkei 20700 € 397.44 € Schwenkrahmen 5200x34x1,1 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 410 mm, quadrat 410 rund 320 mm, quadrat 250 rund 410 mm, quadrat 410 rund 320 mm, quadrat 285 860 mm 0.55 kW 3 kW 0.12 kW 2800 mm 1210 mm 1870 mm 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH Bodpowiqtyofx Aa Dsdb OPTIONS: Roller tables and band saw blades on request

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Bdedju Tha Iopfx Aa Deb Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Bdodpfxou Thh Ee Aa Deb Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test. Bdjdpfx Asx A U Ncja Dob

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have switched the machine on and let it run empty for a few minutes to verify its functionality. It comes with 4 x 25-liter nylon containers. Additionally, 120 kg of zirconium beads with a 1 mm diameter are available. Bedpfx Aeyilnzsa Djdb ~ Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a machine designed for production applications, built to handle medium-scale capacities to meet industrial requirements. It facilitates the smooth transition of materials from laboratory scale to full production, ensuring consistency and repeatability of processes and thus reliable material quality. The equipment is widely used across new energy, metallurgy, electronics, ceramics, geology, mining, construction materials, chemical industry, light industry, cosmetics, environmental protection, and other enterprise-level material production sectors. Extremely high centrifugal forces inherent to planetary ball mills generate intensive grinding energy, resulting in short milling times. These machines are ideal wherever the quality control process demands the highest standards of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is well suited for research tasks at scientific institutes, universities, and industrial R&D laboratories to verify the feasibility of scale-up to mass production, as well as for routine operations such as mixing and homogenizing soft, hard, brittle, or fibrous materials—from laboratory tests through to production. - Key Features: - High-performance, nanometer-scale grinding - Digital display, intuitive operation, precise parameter setting - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing with up to 4×6/9 L samples, simultaneous processing of 4 materials - Electric lid opening and integrated crane for easy and convenient operation - Storage for 3 modes and 15 programs - Power failure protection with memory function and automatic restart - Suitable for dry, wet, vacuum, and protective atmosphere grinding - Machine stops upon lid opening; automatic interlock prevents accidental release - Equipped with rollers and swiveling feet for easy movement and stable operation Applications: Grinding, mixing, homogenizing, colloidal milling, mechanical alloying, mechanochemistry Fields of Application: New energies, geology/metallurgy, glass/ceramics, engineering/electronics, building materials, environment/recycling, agriculture, chemistry, medical, biology Feed material: Soft, hard, brittle, fibrous – dry or wet Size reduction principle: Impact, friction Feed size: < 5 mm soil, < 10 mm Final fineness: For colloidal milling, samples below 0.1 micron Number of grinding stations: 4 Grinding methods: Dry grinding, wet grinding, vacuum grinding, grinding under protective atmosphere

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 70300 € 1328.67 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Bedpfx Aswiqq Ssa Dodb Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine register BST camera control system unwinder semi rotary uv flexo chamber no.1 semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting Bdsdpfx Aswgittsa Dsb rewinder max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: Bdsdong Exaspfx Aa Deb The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. Bsdjndn Agopfx Aa Dodb The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site